Cryptographic Accelerator Unit (CPT) support different engine groups, one
for asymmetric algorithms (only AE engines in this group), one for the
most common symmetric algorithms (all SE and all IE engines in this group),
and one for other symmetric algorithms (only SE engines in this group).
For symmetric engine (SE), we obtain the group number using
"MBOX_MSG_GET_ENG_GRP_NUM" mailbox. Let's follow a similar approach to
determine the group number for asymmetric engine (AE).
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
By default, otx2_cpt_get_kcrypto_eng_grp_num() returns the engine group
number of SE engine type. Add an engine type parameter to support
retrieving the engine group number for different engine types.
Since otx2_cpt_get_kcrypto_eng_grp_num() always returns the kernel crypto
engine group number, rename it to otx2_cpt_get_eng_grp_num().
Signed-off-by: Amit Singh Tomar <amitsinght@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Current driver uses static LMTST region allocated by firmware.
Firmware allocated memory for LMTST is available in PF/VF BAR2.
Using this memory have performance impact as this is mapped as
device memory. There is another option to allocate contiguous
memory at run time and map this in LMT MAP table with the
help of AF driver. With this patch dynamic allocated memory
is used for LMTST.
Also add myself as maintainer for crypto octeontx2 driver
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Provide an option in Inline IPsec configure mailbox to configure the
CPT_AF_LFX_CTL:CTX_ILEN for inline CPT LF attached to CPT RVU PF.
This is needed to set the ctx ilen to size of inbound SA for
HW errata IPBUCPT-38756. Not setting this would lead to new context's
not being fetched.
Also set FLR_FLUSH in CPT_LF_CTX_CTL for CPT LF's as workaround
for same errata.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Register errors interrupts for inline cptlf attached to PF driver
so that SMMU faults and other errors can be reported.
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT LF must be reset and follow CPT LF disable sequence
suggested by HW team, when driver exits.
This patch adds code for the same.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Scatter Gather input format for CPT has changed on CN10KB/CN10KA B0 HW
to make it compatible with NIX Scatter Gather format to support SG mode
for inline IPsec. This patch modifies the code to make the driver works
for the same. This patch also enables CPT firmware load for these chips.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On OcteonTX2/OctoenTX3 variants of silicon, Admin function (AF)
handles resource allocation and configuration for PFs and their VFs.
PFs request the AF directly, via mailboxes.
Unlike PFs, VFs cannot send a mailbox request directly. A VF sends
mailbox messages to its parent PF, with which it shares a
mailbox region. The PF then forwards these messages to the AF.
This patch adds code to configure inline-IPsec HW resources for
CPT VFs as CPT VFs cannot send a mailbox request directly to AF.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
LDWB is getting incorrectly used in HW when
CPT_AF_LF()_PTR_CTL[IQB_LDWB]=1 and CPT instruction queue has less than
320 free entries. So, increase HW instruction queue size by 320 and give
320 entries less for SW/NIX RX as a SW workaround.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT result format had changed for CN10K HW to accommodate more
fields. This patch adds support to use new result format and
new LMTST lines for CPT operations on CN10K platform.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On CN10K platform transmit/receive buffer alloc and free from/to
hardware had changed to support burst operation. Whereas pervious
silicon's only support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used to send CPT commands to HW.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB
based on number of LMTLINES configured.
This patch adds support for mapping of PF/VF LMTST region.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
OcteonTX2 series of silicons have multiple variants, the
98xx variant has two crypto (CPT0 & CPT1) blocks. This patch
adds support for firmware load on new CPT block(CPT1).
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Attach LFs to CPT VF to process the crypto requests and register
LF interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Adds support to get engine capabilities and adds a new mailbox
to share capabilities with VF driver.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CPT RVU Local Functions(LFs) needs to be attached to the
PF/VF to submit the instructions to CPT.
This patch adds the interface to initialize and attach
the LFs. It also adds interface to register the LF's
interrupts.
Signed-off-by: Suheil Chandran <schandran@marvell.com>
Signed-off-by: Lukasz Bartosik <lbartosik@marvell.com>
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
