Add support for the lan969x SoC clock driver in the existing lan966x
driver. The lan969x clock controller contains 3 PLLs - cpu_clk, ddr_clk
and sys_clk (same as lan966x) which generates and supplies the clock to
various peripherals within the SoC.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240916-lan969x-clock-v1-4-0e150336074d@microchip.com
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
In preparation for lan969x support, add private match data for lan966x
and add variables for: peripheral clock names, clock gate names, number
of total clocks and number of generic clocks. Use the variables
throughout.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://lore.kernel.org/r/20240916-lan969x-clock-v1-3-0e150336074d@microchip.com
[claudiu.beznea: in lan966x_clk_probe(): keep struct_size() arguments on
a single line]
Signed-off-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
The lan966x driver registers a gck clock with both a determine_rate and
a round_rate implementation. Both are equivalent, and are only called by
clk_core_determine_round_nolock() which favors determine_rate.
Thus, lan966x_gck_round_rate() is never called, so we can just remove
it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v4-5-971d5077e7d2@cerno.tech
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Set the COMMON_CLK_LAN966X option as a tristate and switch from
builtin_platform_driver() to module_platform_driver() to allow building
and using this driver as a module.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20220617103306.489466-1-clement.leger@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The register address used for the clock gate register is the base
register address coming from first reg map (ie. the generic
clock registers) instead of the second reg map defining the clock
gate register.
Use the correct clock gate register address.
Fixes: 5ad5915dea ("clk: lan966x: Extend lan966x clock driver for clock gating support")
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://lore.kernel.org/r/20220704102845.168438-2-herve.codina@bootlin.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Extend the clock driver to add support also for clock gating. The
following peripherals can be gated: UHPHS, UDPHS, MCRAMC, HMATRIX.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211103085102.1656081-5-horatiu.vultur@microchip.com
This adds Generic Clock Controller driver for lan966x SoC.
Lan966x clock controller contains 3 PLLs - cpu_clk, ddr_clk
and sys_clk. It generates and supplies clock to various
peripherals within SoC.
Register settings required to provide GCK clocking to a
peripheral is as below:
GCK_SRC_SEL = Select clock source.
GCK_PRESCALER = Set divider value.
GCK_ENA = 1 - Enable GCK clock.
Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Co-developed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211103061935.25677-4-kavyasree.kotagiri@microchip.com
