"atmel,attpm20p" DT compatible is missing its SPI device ID entry, not
allowing module autoloading and leading to the following message:
"SPI driver tpm_tis_spi has no spi_device_id for atmel,attpm20p"
Based on:
commit 7eba41fe8c ("tpm_tis_spi: Add missing SPI ID")
Fix this by adding the corresponding "attpm20p" spi_device_id entry.
Fixes: 3c45308c44 ("tpm_tis_spi: Add compatible string atmel,attpm20p")
Cc: stable@vger.kernel.org # +v6.9
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The TPM SPI transfer mechanism uses MAX_SPI_FRAMESIZE for computing the
maximum transfer length and the size of the transfer buffer. As such, it
does not account for the 4 bytes of header that prepends the SPI data
frame. This can result in out-of-bounds accesses and was confirmed with
KASAN.
Introduce SPI_HDRSIZE to account for the header and use to allocate the
transfer buffer.
Fixes: a86a42ac2b ("tpm_tis_spi: Add hardware wait polling")
Signed-off-by: Matthew R. Ochs <mochs@nvidia.com>
Tested-by: Carol Soto <csoto@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
This is my pull request for Linux v6.9. Contains small scope bug fixes
and device tree updates. No new features.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCZe+gDBIcamFya2tvQGtl
cm5lbC5vcmcACgkQGnq6IXRrq9JyzwD7B+kWBSArbN/zG+9AnsvlauMt10euyOma
Al42W6JZjbwBAKLbiVJOirULZNprSbuDgZQOZC6izAzHHx/RPQKbkFQB
=zJ1F
-----END PGP SIGNATURE-----
Merge tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Small bug fixes and device tree updates. No new features"
* tag 'tpmdd-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tis_i2c: Add compatible string nuvoton,npct75x
tpm_tis: Add compatible string atmel,at97sc3204
tpm_tis_spi: Add compatible string atmel,attpm20p
dt-bindings: tpm: Add compatible string atmel,attpm20p
tpm,tpm_tis: Avoid warning splat at shutdown
tpm/tpm_ftpm_tee: fix all kernel-doc warnings
Commit 4f2a348aa3 ("arm64: dts: imx8mm-venice-gw73xx: add TPM device")
added a devicetree node for the Trusted Platform Module on certain
Gateworks boards.
The commit only used the generic "tcg,tpm_tis-spi" compatible string,
but public documentation shows that the chip is an ATTPM20P from Atmel
(nowadays Microchip):
https://trac.gateworks.com/wiki/tpm
Add the chip to the supported compatible strings of the TPM TIS SPI
driver.
For reference, a datasheet is available at:
https://ww1.microchip.com/downloads/en/DeviceDoc/ATTPM20P-Trusted-Platform-Module-TPM-2.0-SPI-Interface-Summary-Data-Sheet-DS40002082A.pdf
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@kernel.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In commit 8caab75fd2 ("spi: Generalize SPI "master" to "controller"")
some functions and struct members were renamed. To not break all drivers
compatibility macros were provided.
To be able to remove these compatibility macros push the renaming into
this driver.
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/29000c8fc0612974242e3c23d14dd4771b92c71e.1707324794.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
These are the remaining few clean-ups of DT related includes which
didn't get applied to subsystem trees.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEktVUI4SxYhzZyEuo+vtdtY28YcMFAmTucUoACgkQ+vtdtY28
YcOYoQ//RwIPeWc74PHQbOb6eQR95eTHDcDE1MR9Fw8amqxFaomGlSMpbyVyP4ag
8p82c6qfJIZautyEikbKFO+iYjFMua0KuOTMVuDxHErQOl6ym4P4Uk3+1h5stVSj
IdfK4CACtMKxKBOPAcyxJU6HKoWcUtMKsKV6OLdDh7M2Fy/G4RCjv4w1Xf3VAn59
VOa0KF7FhHU3dhIB/tGsj0t13+3e3kF5+l4+pdoMoZWhR4gac5FJRxiR5dMZG6jr
VY8i9FZb7DW2VtY78FVVOaYDDVf4vNrc+0kqnCbWUaKACHPgNXC375LvS7jFGXvc
HYVN3teqhFxNOyoSehn2bdBVwJxjQFgy2gTt2vRWTa/CaUDES90cue2R9GT2Sz0b
eBc3DQtNeT5m8mrLkuEfZrJjKjaEy2Pr6FjNDhNcmkJak7dkMMgkG/Y/SpNmpZOe
2C3T6i4i6FUxni/2/rWHSVLnYBGfhPNdwWAZcQOi8rqtzp3tF46wVa345+Ev3VDG
ECDndH8Qk3gtOmGyeTIvPc51yDP6Hpuh7+0jydtehkXHB+cUJtR+g0efIGf7BDgo
sQpa1vRxkOolrCxyzKwcogEY7jjeccv/FM7BwaZQKXEibiKGkxeDuahdwbfvDuVq
br16Uj9VzG8Jl6KK0gexV7kzZAAdw1y3JqPGUZf7hn4zmk099ow=
=eLMf
-----END PGP SIGNATURE-----
Merge tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree include cleanups from Rob Herring:
"These are the remaining few clean-ups of DT related includes which
didn't get applied to subsystem trees"
* tag 'devicetree-header-cleanups-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
ipmi: Explicitly include correct DT includes
tpm: Explicitly include correct DT includes
lib/genalloc: Explicitly include correct DT includes
parport: Explicitly include correct DT includes
sbus: Explicitly include correct DT includes
mux: Explicitly include correct DT includes
macintosh: Explicitly include correct DT includes
hte: Explicitly include correct DT includes
EDAC: Explicitly include correct DT includes
clocksource: Explicitly include correct DT includes
sparc: Explicitly include correct DT includes
riscv: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230728134803.3223742-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
TPM devices may insert wait state on last clock cycle of ADDR phase.
For SPI controllers that support full-duplex transfers, this can be
detected using software by reading the MISO line. For SPI controllers
that only support half-duplex transfers, such as the Tegra QSPI, it is
not possible to detect the wait signal from software. The QSPI
controller in Tegra234 and Tegra241 implement hardware detection of the
wait signal which can be enabled in the controller for TPM devices.
The current TPM TIS driver only supports software detection of the wait
signal. To support SPI controllers that use hardware to detect the wait
signal, add the function tpm_tis_spi_transfer_half() and move the
existing code for software based detection into a function called
tpm_tis_spi_transfer_full(). SPI controllers that only support
half-duplex transfers will always call tpm_tis_spi_transfer_half()
because they cannot support software based detection. The bit
SPI_TPM_HW_FLOW is set to indicate to the SPI controller that hardware
detection is required and it is the responsibility of the SPI controller
driver to determine if this is supported or not.
For hardware flow control, CMD-ADDR-DATA messages are combined into a
single message where as for software flow control exiting method of
CMD-ADDR in a message and DATA in another is followed.
[jarkko: Fixed the function names to match the code change, and the tag
in the short summary.]
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The failure paths in tpm_tis_spi_transfer() do not deactivate
chip select. Send an empty message (cs_select == 0) to overcome
this.
The patch is tested by two ways.
One way needs to touch hardware:
1. force pull MISO pin down to GND, it emulates a forever
'WAIT' timing.
2. probe cs pin by an oscilloscope.
3. load tpm_tis_spi.ko.
After loading, dmesg prints:
"probe of spi0.0 failed with error -110"
and oscilloscope shows cs pin goes high(deactivated) after
the failure. Before the patch, cs pin keeps low.
Second way is by writing a fake spi controller.
1. implement .transfer_one method, fill all rx buf with 0.
2. implement .set_cs method, print the state of cs pin.
we can see cs goes high after the failure.
Signed-off-by: Peijie Shao <shaopeijie@cestc.cn>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The driver can be compile tested with !CONFIG_OF or !CONFIG_ACPI making
unused:
drivers/char/tpm/tpm_tis_spi_main.c:234:34: error: ‘of_tis_spi_match’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Only tpm_tis and tpm_tis_synquacer have a dedicated way to access
multiple bytes at once, every other driver will just fall back to
read_bytes/write_bytes. Therefore, remove the read16/read32/write32
calls and move their logic to read_bytes/write_bytes.
Suggested-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Johannes Holland <johannes.holland@infineon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The value returned by an spi driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)
So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Claudius Heine <ch@denx.de>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit c46ed2281b ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.
Fixes: c46ed2281b ("tpm_tis_spi: add missing SPI device ID entries")
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that this module won't auto-load if a DT has
for example has a node with a compatible "infineon,slb9670" string.
In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent
but instead will get a "MODALIAS=spi:slb9670", which is not present in the
kernel module aliases:
$ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias
alias: of:N*T*Cgoogle,cr50C*
alias: of:N*T*Cgoogle,cr50
alias: of:N*T*Ctcg,tpm_tis-spiC*
alias: of:N*T*Ctcg,tpm_tis-spi
alias: of:N*T*Cinfineon,slb9670C*
alias: of:N*T*Cinfineon,slb9670
alias: of:N*T*Cst,st33htpm-spiC*
alias: of:N*T*Cst,st33htpm-spi
alias: spi:cr50
alias: spi:tpm_tis_spi
alias: acpi*:SMO0768:*
To workaround this issue, add in the SPI device ID table all the entries
that are present in the OF device ID table.
Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
causes device probe fails. In order to make newer kernel to be
compatible with the older acpi definition, it would be best set default
probe function.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
On a Chromebook I'm working on I noticed a big (~1 second) delay
during bootup where nothing was happening. Right around this big
delay there were messages about the TPM:
[ 2.311352] tpm_tis_spi spi0.0: TPM ready IRQ confirmed on attempt 2
[ 3.332790] tpm_tis_spi spi0.0: Cr50 firmware version: ...
I put a few printouts in and saw that tpm_tis_spi_init() (specifically
tpm_chip_register() in that function) was taking the lion's share of
this time, though ~115 ms of the time was in cr50_print_fw_version().
Let's make a one-line change to prefer async probe for tpm_tis_spi.
There's no reason we need to block other drivers from probing while we
load.
NOTES:
* It's possible that other hardware runs through the init sequence
faster than Cr50 and this isn't such a big problem for them.
However, even if they are faster they are still doing _some_
transfers over a SPI bus so this should benefit everyone even if to
a lesser extent.
* It's possible that there are extra delays in the code that could be
optimized out. I didn't dig since once I enabled async probe they
no longer impacted me.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
During flow control we are just reading from the TPM, yet our spi_xfer
has the tx_buf and rx_buf both non-NULL which means we're requesting a
full duplex transfer.
SPI is always somewhat of a full duplex protocol anyway and in theory
the other side shouldn't really be looking at what we're sending it
during flow control, but it's still a bit ugly to be sending some
"random" data when we shouldn't.
The default tpm_tis_spi_flow_control() tries to address this by
setting 'phy->iobuf[0] = 0'. This partially avoids the problem of
sending "random" data, but since our tx_buf and rx_buf both point to
the same place I believe there is the potential of us sending the
TPM's previous byte back to it if we hit the retry loop.
Another flow control implementation, cr50_spi_flow_control(), doesn't
address this at all.
Let's clean this up and just make the tx_buf NULL before we call
flow_control(). Not only does this ensure that we're not sending any
"random" bytes but it also possibly could make the SPI controller
behave in a slightly more optimal way.
NOTE: no actual observed problems are fixed by this patch--it's was
just made based on code inspection.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
In a recent change to the SPI subsystem [1], a new 'delay' struct was added
to replace the 'delay_usecs'. This change replaces the current
'delay_usecs' with 'delay' for this driver.
The 'spi_transfer_delay_exec()' function [in the SPI framework] makes sure
that both 'delay_usecs' & 'delay' are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Revert tpm_tis_spi_mod.ko back to tpm_tis_spi.ko as the rename could
break user space scripts. This can be achieved by renaming tpm_tis_spi.c
as tpm_tis_spi_main.c. Then tpm_tis_spi-y can be used inside the
makefile.
Cc: Andrey Pronin <apronin@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: stable@vger.kernel.org # 5.5.x
Fixes: 797c0113c9 ("tpm: tpm_tis_spi: Support cr50 devices")
Reported-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-02-17 20:46:34 +02:00
Renamed from drivers/char/tpm/tpm_tis_spi.c (Browse further)
