If the machine has:
CPUID Fn8000_0021_EAX[30] (SRSO_USER_KERNEL_NO) -- If this bit is 1,
it indicates the CPU is not subject to the SRSO vulnerability across
user/kernel boundaries.
have it fall back to IBPB on VMEXIT only, in the case it is going to run
VMs:
Speculative Return Stack Overflow: Mitigation: IBPB on VMEXIT only
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/20241202120416.6054-2-bp@kernel.org
Move the XSAVE-related CPUID leaf definitions to common code. Then,
use the new definition to remove the last magic number from the CPUID
level dependency table.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205037.43C57CDE%40davehans-spike.ostc.intel.com
The DCA leaf number is also hard-coded in the CPUID level dependency
table. Move its definition to common code and use it.
While at it, fix up the naming and types in the probe code. All
CPUID data is provided in 32-bit registers, not 'unsigned long'.
Also stop referring to "level_9". Move away from test_bit()
because the type is no longer an 'unsigned long'.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Link: https://lore.kernel.org/all/20241213205032.476A30FE%40davehans-spike.ostc.intel.com
The x86_match_cpu() infrastructure can match CPU steppings. Since
there are only 16 possible steppings, the matching infrastructure goes
all out and stores the stepping match as a bitmap. That means it can
match any possible steppings in a single list entry. Fun.
But it exposes this bitmap to each of the X86_MATCH_*() helpers when
none of them really need a bitmap. It makes up for this by exporting a
helper (X86_STEPPINGS()) which converts a contiguous stepping range
into the bitmap which every single user leverages.
Instead of a bitmap, have the main helper for this sort of thing
(X86_MATCH_VFM_STEPS()) just take a stepping range. This ends up
actually being even more compact than before.
Leave the helper in place (renamed to __X86_STEPPINGS()) to make it
more clear what is going on instead of just having a random GENMASK()
in the middle of an already complicated macro.
One oddity that I hit was this macro:
X86_MATCH_VFM_STEPS(vfm, X86_STEPPING_MIN, max_stepping, issues)
It *could* have been converted over to take a min/max stepping value
for each entry. But that would have been a bit too verbose and would
prevent the one oddball in the list (INTEL_COMETLAKE_L stepping 0)
from sticking out.
Instead, just have it take a *maximum* stepping and imply that the match
is from 0=>max_stepping. This is functional for all the cases now and
also retains the nice property of having INTEL_COMETLAKE_L stepping 0
stick out like a sore thumb.
skx_cpuids[] is goofy. It uses the stepping match but encodes all
possible steppings. Just use a normal, non-stepping match helper.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20241213185129.65527B2A%40davehans-spike.ostc.intel.com
In order to be able to differentiate between AMD and Intel based
systems for very early hypercalls without having to rely on the Xen
hypercall page, make get_cpu_vendor() non-static.
Refactor early_cpu_init() for the same reason by splitting out the
loop initializing cpu_devs() into an externally callable function.
This is part of XSA-466 / CVE-2024-53241.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
by erratum 1386 so that the matching loop actually terminates instead of
going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the relocatable
kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN has been
disabled
-----BEGIN PGP SIGNATURE-----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=RC2M
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add a terminating zero end-element to the array describing AMD CPUs
affected by erratum 1386 so that the matching loop actually
terminates instead of going off into the weeds
- Update the boot protocol documentation to mention the fact that the
preferred address to load the kernel to is considered in the
relocatable kernel case too
- Flush the memory buffer containing the microcode patch after applying
microcode on AMD Zen1 and Zen2, to avoid unnecessary slowdowns
- Make sure the PPIN CPU feature flag is cleared on all CPUs if PPIN
has been disabled
* tag 'x86_urgent_for_v6.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
x86/Documentation: Update algo in init_size description of boot protocol
x86/microcode/AMD: Flush patch buffer mapping after application
x86/mm: Carve out INVLPG inline asm for use by others
x86/cpu: Fix PPIN initialization
When the size isn't a small constant, __access_ok() will call
valid_user_address() with the address after the last byte of the user
buffer.
It is valid for a buffer to end with the last valid user address so
valid_user_address() must allow accesses to the base of the guard page.
[ This introduces an off-by-one in the other direction for the plain
non-sized accesses, but since we have that guard region that is a
whole page, those checks "allowing" accesses to that guard region
don't really matter. The access will fault anyway, whether to the
guard page or if the address has been masked to all ones - Linus ]
Fixes: 86e6b1547b ("x86: fix user address masking non-canonical speculation issue")
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On systems that enumerate PPIN (protected processor inventory
number) using CPUID, but where the BIOS locked the MSR to
prevent access /proc/cpuinfo reports "intel_ppin" feature as
present on all logical CPUs except for CPU 0.
This happens because ppin_init() uses x86_match_cpu() to
determine whether PPIN is supported. When called on CPU 0
the test for locked PPIN MSR results in:
clear_cpu_cap(c, info->feature);
This clears the X86 FEATURE bit in boot_cpu_data. When other
CPUs are brought online the x86_match_cpu() fails, and the
PPIN FEATURE bit remains set for those other CPUs.
Fix by using setup_clear_cpu_cap() instead of clear_cpu_cap()
which force clears the FEATURE bit for all CPUS.
Reported-by: Adeel Ashad <adeel.arshad@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241122234212.27451-1-tony.luck@intel.com
- Correct RSB terminology in Kconfig text
-----BEGIN PGP SIGNATURE-----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=02xm
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"As usual for this branch, these are super random: a compile fix for
some newish LLVM checks and making sure a Kconfig text reference to
'RSB' matches the normal definition:
- Rework some CPU setup code to keep LLVM happy on 32-bit
- Correct RSB terminology in Kconfig text"
* tag 'x86_misc_for_6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Make sure flag_is_changeable_p() is always being used
x86/bugs: Correct RSB terminology in Kconfig
- Move Split and Bus lock code to a dedicated file (Ravi Bangoria)
- Add split/bus lock support for AMD (Ravi Bangoria)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=QpKp
-----END PGP SIGNATURE-----
Merge tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 splitlock updates from Ingo Molnar:
- Move Split and Bus lock code to a dedicated file (Ravi Bangoria)
- Add split/bus lock support for AMD (Ravi Bangoria)
* tag 'x86-splitlock-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bus_lock: Add support for AMD
x86/split_lock: Move Split and Bus lock code to a dedicated file
with the purpose of using such hints when making scheduling decisions
- Determine the boost enumerator for each AMD core based on its type: efficiency
or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective core
- Add a feature flag to denote AMD cores which have heterogeneous topology and
enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
-----BEGIN PGP SIGNATURE-----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=420r
-----END PGP SIGNATURE-----
Merge tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Borislav Petkov:
- Add a feature flag which denotes AMD CPUs supporting workload
classification with the purpose of using such hints when making
scheduling decisions
- Determine the boost enumerator for each AMD core based on its type:
efficiency or performance, in the cppc driver
- Add the type of a CPU to the topology CPU descriptor with the goal of
supporting and making decisions based on the type of the respective
core
- Add a feature flag to denote AMD cores which have heterogeneous
topology and enable SD_ASYM_PACKING for those
- Check microcode revisions before disabling PCID on Intel
- Cleanups and fixlets
* tag 'x86_cpu_for_v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Remove redundant CONFIG_NUMA guard around numa_add_cpu()
x86/cpu: Fix FAM5_QUARK_X1000 to use X86_MATCH_VFM()
x86/cpu: Fix formatting of cpuid_bits[] in scattered.c
x86/cpufeatures: Add X86_FEATURE_AMD_WORKLOAD_CLASS feature bit
x86/amd: Use heterogeneous core topology for identifying boost numerator
x86/cpu: Add CPU type to struct cpuinfo_topology
x86/cpu: Enable SD_ASYM_PACKING for PKG domain on AMD
x86/cpufeatures: Add X86_FEATURE_AMD_HETEROGENEOUS_CORES
x86/cpufeatures: Rename X86_FEATURE_FAST_CPPC to have AMD prefix
x86/mm: Don't disable PCID when INVLPG has been fixed by microcode
Remove unnecessary CONFIG_NUMA #ifdef around numa_add_cpu() since the
function is already properly handled in <asm/numa.h> for both NUMA and
non-NUMA configurations. For !CONFIG_NUMA builds, numa_add_cpu() is
defined as an empty function.
Simplify the code without any functionality change.
Testing: Build CONFIG_NUMA=n
Signed-off-by: Shivank Garg <shivankg@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241112072346.428623-1-shivankg@amd.com
When flag_is_changeable_p() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
arch/x86/kernel/cpu/common.c:351:19: error: unused function 'flag_is_changeable_p' [-Werror,-Wunused-function]
351 | static inline int flag_is_changeable_p(u32 flag)
| ^~~~~~~~~~~~~~~~~~~~
Fix this by moving core around to make sure flag_is_changeable_p() is
always being used.
See also commit 6863f5643d ("kbuild: allow Clang to find unused static
inline functions for W=1 build").
While at it, fix the argument type to be unsigned long along with
the local variables, although it currently only runs in 32-bit cases.
Besides that, makes it return boolean instead of int. This induces
the change of the returning type of have_cpuid_p() to be boolean
as well.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://lore.kernel.org/all/20241108153105.1578186-1-andriy.shevchenko%40linux.intel.com
GCC and Clang both implement stack protector support based on Thread Local
Storage (TLS) variables, and this is used in the kernel to implement per-task
stack cookies, by copying a task's stack cookie into a per-CPU variable every
time it is scheduled in.
Both now also implement -mstack-protector-guard-symbol=, which permits the TLS
variable to be specified directly. This is useful because it will allow to
move away from using a fixed offset of 40 bytes into the per-CPU area on
x86_64, which requires a lot of special handling in the per-CPU code and the
runtime relocation code.
However, while GCC is rather lax in its implementation of this command line
option, Clang actually requires that the provided symbol name refers to a TLS
variable (i.e., one declared with __thread), although it also permits the
variable to be undeclared entirely, in which case it will use an implicit
declaration of the right type.
The upshot of this is that Clang will emit the correct references to the stack
cookie variable in most cases, e.g.,
10d: 64 a1 00 00 00 00 mov %fs:0x0,%eax
10f: R_386_32 __stack_chk_guard
However, if a non-TLS definition of the symbol in question is visible in the
same compilation unit (which amounts to the whole of vmlinux if LTO is
enabled), it will drop the per-CPU prefix and emit a load from a bogus
address.
Work around this by using a symbol name that never occurs in C code, and emit
it as an alias in the linker script.
Fixes: 3fb0fdb3bb ("x86/stackprotector/32: Make the canary into a regular percpu variable")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Brian Gerst <brgerst@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1854
Link: https://lore.kernel.org/r/20241105155801.1779119-2-brgerst@gmail.com
It turns out that AMD has a "Meltdown Lite(tm)" issue with non-canonical
accesses in kernel space. And so using just the high bit to decide
whether an access is in user space or kernel space ends up with the good
old "leak speculative data" if you have the right gadget using the
result:
CVE-2020-12965 “Transient Execution of Non-Canonical Accesses“
Now, the kernel surrounds the access with a STAC/CLAC pair, and those
instructions end up serializing execution on older Zen architectures,
which closes the speculation window.
But that was true only up until Zen 5, which renames the AC bit [1].
That improves performance of STAC/CLAC a lot, but also means that the
speculation window is now open.
Note that this affects not just the new address masking, but also the
regular valid_user_address() check used by access_ok(), and the asm
version of the sign bit check in the get_user() helpers.
It does not affect put_user() or clear_user() variants, since there's no
speculative result to be used in a gadget for those operations.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lore.kernel.org/all/80d94591-1297-4afb-b510-c665efd37f10@citrix.com/
Link: https://lore.kernel.org/all/20241023094448.GAZxjFkEOOF_DM83TQ@fat_crate.local/ [1]
Link: https://www.amd.com/en/resources/product-security/bulletin/amd-sb-1010.html
Link: https://arxiv.org/pdf/2108.10771
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Tested-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> # LAM case
Fixes: 2865baf540 ("x86: support user address masking instead of non-speculative conditional")
Fixes: 6014bc2756 ("x86-64: make access_ok() independent of LAM")
Fixes: b19b74bc99 ("x86/mm: Rework address range check in get_user() and put_user()")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set this flag if the CPU has an IBPB implementation that does not
invalidate return target predictions. Zen generations < 4 do not flush
the RSB when executing an IBPB and this bug flag denotes that.
[ bp: Massage. ]
Signed-off-by: Johannes Wikner <kwikner@ethz.ch>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
- Enable FRED right after init_mem_mapping() because at that point the
early IDT fault handler is replaced by the real fault handler. The real
fault handler retrieves the faulting address from the stack frame and
not from CR2 when the FRED feature is set. But that obviously only
works when FRED is enabled in the CPU as well.
- Set SS to __KERNEL_DS when enabling FRED to prevent a corner case where
ERETS can observe a SS mismatch and raises a #GP.
-----BEGIN PGP SIGNATURE-----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=cKRu
-----END PGP SIGNATURE-----
Merge tag 'x86-fred-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED updates from Thomas Gleixner:
- Enable FRED right after init_mem_mapping() because at that point the
early IDT fault handler is replaced by the real fault handler. The
real fault handler retrieves the faulting address from the stack
frame and not from CR2 when the FRED feature is set. But that
obviously only works when FRED is enabled in the CPU as well.
- Set SS to __KERNEL_DS when enabling FRED to prevent a corner case
where ERETS can observe a SS mismatch and raises a #GP.
* tag 'x86-fred-2024-09-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Set FRED RSP0 on return to userspace instead of context switch
x86/msr: Switch between WRMSRNS and WRMSR with the alternatives mechanism
x86/entry: Test ti_work for zero before processing individual bits
x86/fred: Set SS to __KERNEL_DS when enabling FRED
x86/fred: Enable FRED right after init_mem_mapping()
x86/fred: Move FRED RSP initialization into a separate function
x86/fred: Parse cmdline param "fred=" in cpu_parse_early_param()
On 64-bit init_mem_mapping() relies on the minimal page fault handler
provided by the early IDT mechanism. The real page fault handler is
installed right afterwards into the IDT.
This is problematic on CPUs which have X86_FEATURE_FRED set because the
real page fault handler retrieves the faulting address from the FRED
exception stack frame and not from CR2, but that does obviously not work
when FRED is not yet enabled in the CPU.
To prevent this enable FRED right after init_mem_mapping() without
interrupt stacks. Those are enabled later in trap_init() after the CPU
entry area is set up.
[ tglx: Encapsulate the FRED details ]
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-4-xin@zytor.com
To enable FRED earlier, move the RSP initialization out of
cpu_init_fred_exceptions() into cpu_init_fred_rsps().
This is required as the FRED RSP initialization depends on the availability
of the CPU entry areas which are set up late in trap_init(),
No functional change intended. Marked with Fixes as it's a depedency for
the real fix.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-3-xin@zytor.com
Depending on whether FRED is enabled, sysvec_install() installs a system
interrupt handler into either into FRED's system vector dispatch table or
into the IDT.
However FRED can be disabled later in trap_init(), after sysvec_install()
has been invoked already; e.g., the HYPERVISOR_CALLBACK_VECTOR handler is
registered with sysvec_install() in kvm_guest_init(), which is called in
setup_arch() but way before trap_init().
IOW, there is a gap between FRED is available and available but disabled.
As a result, when FRED is available but disabled, early sysvec_install()
invocations fail to install the IDT handler resulting in spurious
interrupts.
Fix it by parsing cmdline param "fred=" in cpu_parse_early_param() to
ensure that FRED is disabled before the first sysvec_install() incovations.
Fixes: 3810da1271 ("x86/fred: Add a fred= cmdline param")
Reported-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240709154048.3543361-2-xin@zytor.com
Add Bus Lock Detect (called Bus Lock Trap in AMD docs) support for AMD
platforms. Bus Lock Detect is enumerated with CPUID Fn0000_0007_ECX_x0
bit [24 / BUSLOCKTRAP]. It can be enabled through MSR_IA32_DEBUGCTLMSR.
When enabled, hardware clears DR6[11] and raises a #DB exception on
occurrence of Bus Lock if CPL > 0. More detail about the feature can be
found in AMD APM[1].
[1]: AMD64 Architecture Programmer's Manual Pub. 40332, Rev. 4.07 - June
2023, Vol 2, 13.1.3.6 Bus Lock Trap
https://bugzilla.kernel.org/attachment.cgi?id=304653
Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/all/20240808062937.1149-3-ravi.bangoria@amd.com
Intel CPUs have a MSR bit to limit CPUID enumeration to leaf two. If
this bit is set by the BIOS then CPUID evaluation including topology
enumeration does not work correctly as the evaluation code does not try
to analyze any leaf greater than two.
This went unnoticed before because the original topology code just
repeated evaluation several times and managed to overwrite the initial
limited information with the correct one later. The new evaluation code
does it once and therefore ends up with the limited and wrong
information.
Cure this by unlocking CPUID right before evaluating anything which
depends on the maximum CPUID leaf being greater than two instead of
rereading stuff after unlock.
Fixes: 22d63660c3 ("x86/cpu: Use common topology code for Intel")
Reported-by: Peter Schneider <pschneider1968@googlemail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/fd3f73dc-a86f-4bcf-9c60-43556a21eb42@googlemail.com
tl;dr: CPUs with CPUID.80000008H but without CPUID.01H:EDX[CLFSH]
will end up reporting cache_line_size()==0 and bad things happen.
Fill in a default on those to avoid the problem.
Long Story:
The kernel dies a horrible death if c->x86_cache_alignment (aka.
cache_line_size() is 0. Normally, this value is populated from
c->x86_clflush_size.
Right now the code is set up to get c->x86_clflush_size from two
places. First, modern CPUs get it from CPUID. Old CPUs that don't
have leaf 0x80000008 (or CPUID at all) just get some sane defaults
from the kernel in get_cpu_address_sizes().
The vast majority of CPUs that have leaf 0x80000008 also get
->x86_clflush_size from CPUID. But there are oddballs.
Intel Quark CPUs[1] and others[2] have leaf 0x80000008 but don't set
CPUID.01H:EDX[CLFSH], so they skip over filling in ->x86_clflush_size:
cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
if (cap0 & (1<<19))
c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
So they: land in get_cpu_address_sizes() and see that CPUID has level
0x80000008 and jump into the side of the if() that does not fill in
c->x86_clflush_size. That assigns a 0 to c->x86_cache_alignment, and
hilarity ensues in code like:
buffer = kzalloc(ALIGN(sizeof(*buffer), cache_line_size()),
GFP_KERNEL);
To fix this, always provide a sane value for ->x86_clflush_size.
Big thanks to Andy Shevchenko for finding and reporting this and also
providing a first pass at a fix. But his fix was only partial and only
worked on the Quark CPUs. It would not, for instance, have worked on
the QEMU config.
1. https://raw.githubusercontent.com/InstLatx64/InstLatx64/master/GenuineIntel/GenuineIntel0000590_Clanton_03_CPUID.txt
2. You can also get this behavior if you use "-cpu 486,+clzero"
in QEMU.
[ dhansen: remove 'vp_bits_from_cpuid' reference in changelog
because bpetkov brutally murdered it recently. ]
Fixes: fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Jörn Heusipp <osmanx@heusipp.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240516173928.3960193-1-andriy.shevchenko@linux.intel.com/
Link: https://lore.kernel.org/lkml/5e31cad3-ad4d-493e-ab07-724cfbfaba44@heusipp.de/
Link: https://lore.kernel.org/all/20240517200534.8EC5F33E%40davehans-spike.ostc.intel.com
Support for posted interrupts on bare metal
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the corresponding
device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter.
-----BEGIN PGP SIGNATURE-----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=bqLN
-----END PGP SIGNATURE-----
Merge tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 interrupt handling updates from Thomas Gleixner:
"Add support for posted interrupts on bare metal.
Posted interrupts is a virtualization feature which allows to inject
interrupts directly into a guest without host interaction. The VT-d
interrupt remapping hardware sets the bit which corresponds to the
interrupt vector in a vector bitmap which is either used to inject the
interrupt directly into the guest via a virtualized APIC or in case
that the guest is scheduled out provides a host side notification
interrupt which informs the host that an interrupt has been marked
pending in the bitmap.
This can be utilized on bare metal for scenarios where multiple
devices, e.g. NVME storage, raise interrupts with a high frequency. In
the default mode these interrupts are handles independently and
therefore require a full roundtrip of interrupt entry/exit.
Utilizing posted interrupts this roundtrip overhead can be avoided by
coalescing these interrupt entries to a single entry for the posted
interrupt notification. The notification interrupt then demultiplexes
the pending bits in a memory based bitmap and invokes the
corresponding device specific handlers.
Depending on the usage scenario and device utilization throughput
improvements between 10% and 130% have been measured.
As this is only relevant for high end servers with multiple device
queues per CPU attached and counterproductive for situations where
interrupts are arriving at distinct times, the functionality is opt-in
via a kernel command line parameter"
* tag 'x86-irq-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/irq: Use existing helper for pending vector check
iommu/vt-d: Enable posted mode for device MSIs
iommu/vt-d: Make posted MSI an opt-in command line option
x86/irq: Extend checks for pending vectors to posted interrupts
x86/irq: Factor out common code for checking pending interrupts
x86/irq: Install posted MSI notification handler
x86/irq: Factor out handler invocation from common_interrupt()
x86/irq: Set up per host CPU posted interrupt descriptors
x86/irq: Reserve a per CPU IDT vector for posted MSIs
x86/irq: Add a Kconfig option for posted MSI
x86/irq: Remove bitfields in posted interrupt descriptor
x86/irq: Unionize PID.PIR for 64bit access w/o casting
KVM: VMX: Move posted interrupt descriptor out of VMX code
To support posted MSIs, create a posted interrupt descriptor (PID) for each
host CPU. Later on, when setting up interrupt affinity, the IOMMU's
interrupt remapping table entry (IRTE) will point to the physical address
of the matching CPU's PID.
Each PID is initialized with the owner CPU's physical APICID as the
destination.
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423174114.526704-7-jacob.jun.pan@linux.intel.com
New CPU #defines encode vendor and family as well as model.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240424181507.41693-1-tony.luck@intel.com
There's a new conflict between this commit pending in x86/cpu:
63edbaa48a x86/cpu/topology: Add support for the AMD 0x80000026 leaf
And these fixes in x86/urgent:
c064b536a8 x86/cpu/amd: Make the NODEID_MSR union actually work
1b3108f689 x86/cpu/amd: Make the CPUID 0x80000008 parser correct
Resolve them.
Conflicts:
arch/x86/kernel/cpu/topology_amd.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So we are using the 'ia32_cap' value in a number of places,
which got its name from MSR_IA32_ARCH_CAPABILITIES MSR register.
But there's very little 'IA32' about it - this isn't 32-bit only
code, nor does it originate from there, it's just a historic
quirk that many Intel MSR names are prefixed with IA32_.
This is already clear from the helper method around the MSR:
x86_read_arch_cap_msr(), which doesn't have the IA32 prefix.
So rename 'ia32_cap' to 'x86_arch_cap_msr' to be consistent with
its role and with the naming of the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nikolay Borisov <nik.borisov@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/9592a18a814368e75f8f4b9d74d3883aa4fd1eaf.1712813475.git.jpoimboe@kernel.org
Mitigation for BHI is selected based on the bug enumeration. Add bits
needed to enumerate BHI bug.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
The boot sequence evaluates CPUID information twice:
1) During early boot
2) When finalizing the early setup right before
mitigations are selected and alternatives are patched.
In both cases the evaluation is stored in boot_cpu_data, but on UP the
copying of boot_cpu_data to the per CPU info of the boot CPU happens
between #1 and #2. So any update which happens in #2 is never propagated to
the per CPU info instance.
Consolidate the whole logic and copy boot_cpu_data right before applying
alternatives as that's the point where boot_cpu_data is in it's final
state and not supposed to change anymore.
This also removes the voodoo mb() from smp_prepare_cpus_common() which
had absolutely no purpose.
Fixes: 71eb4893cf ("x86/percpu: Cure per CPU madness on UP")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240322185305.127642785@linutronix.de
Drop 'vp_bits_from_cpuid' as it is not really needed.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240316120706.4352-1-bp@alien8.de
-----BEGIN PGP SIGNATURE-----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=5V9t
-----END PGP SIGNATURE-----
Merge tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 RFDS mitigation from Dave Hansen:
"RFDS is a CPU vulnerability that may allow a malicious userspace to
infer stale register values from kernel space. Kernel registers can
have all kinds of secrets in them so the mitigation is basically to
wait until the kernel is about to return to userspace and has user
values in the registers. At that point there is little chance of
kernel secrets ending up in the registers and the microarchitectural
state can be cleared.
This leverages some recent robustness fixes for the existing MDS
vulnerability. Both MDS and RFDS use the VERW instruction for
mitigation"
* tag 'rfds-for-linus-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/x86: Export RFDS_NO and RFDS_CLEAR to guests
x86/rfds: Mitigate Register File Data Sampling (RFDS)
Documentation/hw-vuln: Add documentation for RFDS
x86/mmio: Disable KVM mitigation when X86_FEATURE_CLEAR_CPU_BUF is set
- The biggest change is the rework of the percpu code,
to support the 'Named Address Spaces' GCC feature,
by Uros Bizjak:
- This allows C code to access GS and FS segment relative
memory via variables declared with such attributes,
which allows the compiler to better optimize those accesses
than the previous inline assembly code.
- The series also includes a number of micro-optimizations
for various percpu access methods, plus a number of
cleanups of %gs accesses in assembly code.
- These changes have been exposed to linux-next testing for
the last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally
working handling of FPU switching - which also generates
better code.
- Propagate more RIP-relative addressing in assembly code,
to generate slightly better code.
- Rework the CPU mitigations Kconfig space to be less idiosyncratic,
to make it easier for distros to follow & maintain these options.
- Rework the x86 idle code to cure RCU violations and
to clean up the logic.
- Clean up the vDSO Makefile logic.
- Misc cleanups and fixes.
[ Please note that there's a higher number of merge commits in
this branch (three) than is usual in x86 topic trees. This happened
due to the long testing lifecycle of the percpu changes that
involved 3 merge windows, which generated a longer history
and various interactions with other core x86 changes that we
felt better about to carry in a single branch. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3v4F
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
- The biggest change is the rework of the percpu code, to support the
'Named Address Spaces' GCC feature, by Uros Bizjak:
- This allows C code to access GS and FS segment relative memory
via variables declared with such attributes, which allows the
compiler to better optimize those accesses than the previous
inline assembly code.
- The series also includes a number of micro-optimizations for
various percpu access methods, plus a number of cleanups of %gs
accesses in assembly code.
- These changes have been exposed to linux-next testing for the
last ~5 months, with no known regressions in this area.
- Fix/clean up __switch_to()'s broken but accidentally working handling
of FPU switching - which also generates better code
- Propagate more RIP-relative addressing in assembly code, to generate
slightly better code
- Rework the CPU mitigations Kconfig space to be less idiosyncratic, to
make it easier for distros to follow & maintain these options
- Rework the x86 idle code to cure RCU violations and to clean up the
logic
- Clean up the vDSO Makefile logic
- Misc cleanups and fixes
* tag 'x86-core-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
x86/idle: Select idle routine only once
x86/idle: Let prefer_mwait_c1_over_halt() return bool
x86/idle: Cleanup idle_setup()
x86/idle: Clean up idle selection
x86/idle: Sanitize X86_BUG_AMD_E400 handling
sched/idle: Conditionally handle tick broadcast in default_idle_call()
x86: Increase brk randomness entropy for 64-bit systems
x86/vdso: Move vDSO to mmap region
x86/vdso/kbuild: Group non-standard build attributes and primary object file rules together
x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o
x86/retpoline: Ensure default return thunk isn't used at runtime
x86/vdso: Use CONFIG_COMPAT_32 to specify vdso32
x86/vdso: Use $(addprefix ) instead of $(foreach )
x86/vdso: Simplify obj-y addition
x86/vdso: Consolidate targets and clean-files
x86/bugs: Rename CONFIG_RETHUNK => CONFIG_MITIGATION_RETHUNK
x86/bugs: Rename CONFIG_CPU_SRSO => CONFIG_MITIGATION_SRSO
x86/bugs: Rename CONFIG_CPU_IBRS_ENTRY => CONFIG_MITIGATION_IBRS_ENTRY
x86/bugs: Rename CONFIG_CPU_UNRET_ENTRY => CONFIG_MITIGATION_UNRET_ENTRY
x86/bugs: Rename CONFIG_SLS => CONFIG_MITIGATION_SLS
...
cure Sparse warnings.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0eJ7
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Misc cleanups, including a large series from Thomas Gleixner to cure
sparse warnings"
* tag 'x86-cleanups-2024-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/nmi: Drop unused declaration of proc_nmi_enabled()
x86/callthunks: Use EXPORT_PER_CPU_SYMBOL_GPL() for per CPU variables
x86/cpu: Provide a declaration for itlb_multihit_kvm_mitigation
x86/cpu: Use EXPORT_PER_CPU_SYMBOL_GPL() for x86_spec_ctrl_current
x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address()
x86/percpu: Cure per CPU madness on UP
smp: Consolidate smp_prepare_boot_cpu()
x86/msr: Add missing __percpu annotations
x86/msr: Prepare for including <linux/percpu.h> into <asm/msr.h>
perf/x86/amd/uncore: Fix __percpu annotation
x86/nmi: Remove an unnecessary IS_ENABLED(CONFIG_SMP)
x86/apm_32: Remove dead function apm_get_battery_status()
x86/insn-eval: Fix function param name in get_eff_addr_sib()
kernel to be used as a KVM hypervisor capable of running SNP (Secure
Nested Paging) guests. Roughly speaking, SEV-SNP is the ultimate goal
of the AMD confidential computing side, providing the most
comprehensive confidential computing environment up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the next
cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
-----BEGIN PGP SIGNATURE-----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=c1ps
-----END PGP SIGNATURE-----
Merge tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Add the x86 part of the SEV-SNP host support.
This will allow the kernel to be used as a KVM hypervisor capable of
running SNP (Secure Nested Paging) guests. Roughly speaking, SEV-SNP
is the ultimate goal of the AMD confidential computing side,
providing the most comprehensive confidential computing environment
up to date.
This is the x86 part and there is a KVM part which did not get ready
in time for the merge window so latter will be forthcoming in the
next cycle.
- Rework the early code's position-dependent SEV variable references in
order to allow building the kernel with clang and -fPIE/-fPIC and
-mcmodel=kernel
- The usual set of fixes, cleanups and improvements all over the place
* tag 'x86_sev_for_v6.9_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
x86/sev: Disable KMSAN for memory encryption TUs
x86/sev: Dump SEV_STATUS
crypto: ccp - Have it depend on AMD_IOMMU
iommu/amd: Fix failure return from snp_lookup_rmpentry()
x86/sev: Fix position dependent variable references in startup code
crypto: ccp: Make snp_range_list static
x86/Kconfig: Remove CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT
Documentation: virt: Fix up pre-formatted text block for SEV ioctls
crypto: ccp: Add the SNP_SET_CONFIG command
crypto: ccp: Add the SNP_COMMIT command
crypto: ccp: Add the SNP_PLATFORM_STATUS command
x86/cpufeatures: Enable/unmask SEV-SNP CPU feature
KVM: SEV: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
crypto: ccp: Add panic notifier for SEV/SNP firmware shutdown on kdump
iommu/amd: Clean up RMP entries for IOMMU pages during SNP shutdown
crypto: ccp: Handle legacy SEV commands when SNP is enabled
crypto: ccp: Handle non-volatile INIT_EX data when SNP is enabled
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
x86/sev: Introduce an SNP leaked pages list
crypto: ccp: Provide an API to issue SEV and SNP commands
...
FRED is a replacement for IDT event delivery on x86 and addresses most of
the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved in
nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested exceptions
as the interrupt stack mechanism rewinds the stack on each entry which
requires a massive effort in the low level entry of #NMI code to handle
this.
3) No hardware distinction between entry from kernel or from user which
makes establishing kernel context more complex than it needs to be
especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which is a
problem when the perf NMI takes a fault when collecting a stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion on
large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save exception
cause registers. This ensures that the meta information for each
exception is preserved on stack and avoids the extra complexity of
preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS BASE
handling which is required to establish kernel context for per CPU
variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the return
from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design because it
uses a central entry points for kernel and user space and the CPUstores
the entry type (exception, trap, interrupt, syscall) on the entry stack
along with the vector number. The entry code has to demultiplex this
information, but this removes the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have information
pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs. the existing IDT
implementation to the extent possible and the deviation in hot paths like
context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the extended
stack frame and the hardware based GS BASE swichting and therefore have no
impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are know outstanding problems.
-----BEGIN PGP SIGNATURE-----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=Ib7w
-----END PGP SIGNATURE-----
Merge tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED support from Thomas Gleixner:
"Support for x86 Fast Return and Event Delivery (FRED).
FRED is a replacement for IDT event delivery on x86 and addresses most
of the technical nightmares which IDT exposes:
1) Exception cause registers like CR2 need to be manually preserved
in nested exception scenarios.
2) Hardware interrupt stack switching is suboptimal for nested
exceptions as the interrupt stack mechanism rewinds the stack on
each entry which requires a massive effort in the low level entry
of #NMI code to handle this.
3) No hardware distinction between entry from kernel or from user
which makes establishing kernel context more complex than it needs
to be especially for unconditionally nestable exceptions like NMI.
4) NMI nesting caused by IRET unconditionally reenabling NMIs, which
is a problem when the perf NMI takes a fault when collecting a
stack trace.
5) Partial restore of ESP when returning to a 16-bit segment
6) Limitation of the vector space which can cause vector exhaustion
on large systems.
7) Inability to differentiate NMI sources
FRED addresses these shortcomings by:
1) An extended exception stack frame which the CPU uses to save
exception cause registers. This ensures that the meta information
for each exception is preserved on stack and avoids the extra
complexity of preserving it in software.
2) Hardware interrupt stack switching is non-rewinding if a nested
exception uses the currently interrupt stack.
3) The entry points for kernel and user context are separate and GS
BASE handling which is required to establish kernel context for
per CPU variable access is done in hardware.
4) NMIs are now nesting protected. They are only reenabled on the
return from NMI.
5) FRED guarantees full restore of ESP
6) FRED does not put a limitation on the vector space by design
because it uses a central entry points for kernel and user space
and the CPUstores the entry type (exception, trap, interrupt,
syscall) on the entry stack along with the vector number. The
entry code has to demultiplex this information, but this removes
the vector space restriction.
The first hardware implementations will still have the current
restricted vector space because lifting this limitation requires
further changes to the local APIC.
7) FRED stores the vector number and meta information on stack which
allows having more than one NMI vector in future hardware when the
required local APIC changes are in place.
The series implements the initial FRED support by:
- Reworking the existing entry and IDT handling infrastructure to
accomodate for the alternative entry mechanism.
- Expanding the stack frame to accomodate for the extra 16 bytes FRED
requires to store context and meta information
- Providing FRED specific C entry points for events which have
information pushed to the extended stack frame, e.g. #PF and #DB.
- Providing FRED specific C entry points for #NMI and #MCE
- Implementing the FRED specific ASM entry points and the C code to
demultiplex the events
- Providing detection and initialization mechanisms and the necessary
tweaks in context switching, GS BASE handling etc.
The FRED integration aims for maximum code reuse vs the existing IDT
implementation to the extent possible and the deviation in hot paths
like context switching are handled with alternatives to minimalize the
impact. The low level entry and exit paths are seperate due to the
extended stack frame and the hardware based GS BASE swichting and
therefore have no impact on IDT based systems.
It has been extensively tested on existing systems and on the FRED
simulation and as of now there are no outstanding problems"
* tag 'x86-fred-2024-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits)
x86/fred: Fix init_task thread stack pointer initialization
MAINTAINERS: Add a maintainer entry for FRED
x86/fred: Fix a build warning with allmodconfig due to 'inline' failing to inline properly
x86/fred: Invoke FRED initialization code to enable FRED
x86/fred: Add FRED initialization functions
x86/syscall: Split IDT syscall setup code into idt_syscall_init()
KVM: VMX: Call fred_entry_from_kvm() for IRQ/NMI handling
x86/entry: Add fred_entry_from_kvm() for VMX to handle IRQ/NMI
x86/entry/calling: Allow PUSH_AND_CLEAR_REGS being used beyond actual entry code
x86/fred: Fixup fault on ERETU by jumping to fred_entrypoint_user
x86/fred: Let ret_from_fork_asm() jmp to asm_fred_exit_user when FRED is enabled
x86/traps: Add sysvec_install() to install a system interrupt handler
x86/fred: FRED entry/exit and dispatch code
x86/fred: Add a machine check entry stub for FRED
x86/fred: Add a NMI entry stub for FRED
x86/fred: Add a debug fault entry stub for FRED
x86/idtentry: Incorporate definitions/declarations of the FRED entries
x86/fred: Make exc_page_fault() work for FRED
x86/fred: Allow single-step trap and NMI when starting a new task
x86/fred: No ESPFIX needed when FRED is enabled
...
RFDS is a CPU vulnerability that may allow userspace to infer kernel
stale data previously used in floating point registers, vector registers
and integer registers. RFDS only affects certain Intel Atom processors.
Intel released a microcode update that uses VERW instruction to clear
the affected CPU buffers. Unlike MDS, none of the affected cores support
SMT.
Add RFDS bug infrastructure and enable the VERW based mitigation by
default, that clears the affected buffers just before exiting to
userspace. Also add sysfs reporting and cmdline parameter
"reg_file_data_sampling" to control the mitigation.
For details see:
Documentation/admin-guide/hw-vuln/reg-file-data-sampling.rst
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
The idle routine selection is done on every CPU bringup operation and
has a guard in place which is effective after the first invocation,
which is a pointless exercise.
Invoke it once on the boot CPU and mark the related functions __init.
The guard check has to stay as xen_set_default_idle() runs early.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/87edcu6vaq.ffs@tglx
On UP builds Sparse complains rightfully about accesses to cpu_info with
per CPU accessors:
cacheinfo.c:282:30: sparse: warning: incorrect type in initializer (different address spaces)
cacheinfo.c:282:30: sparse: expected void const [noderef] __percpu *__vpp_verify
cacheinfo.c:282:30: sparse: got unsigned int *
The reason is that on UP builds cpu_info which is a per CPU variable on SMP
is mapped to boot_cpu_info which is a regular variable. There is a hideous
accessor cpu_data() which tries to hide this, but it's not sufficient as
some places require raw accessors and generates worse code than the regular
per CPU accessors.
Waste sizeof(struct x86_cpuinfo) memory on UP and provide the per CPU
cpu_info unconditionally. This requires to update the CPU info on the boot
CPU as SMP does. (Ab)use the weakly defined smp_prepare_boot_cpu() function
and implement exactly that.
This allows to use regular per CPU accessors uncoditionally and paves the
way to remove the cpu_data() hackery.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.622511517@linutronix.de
In commit fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct
value straight away, instead of a two-phase approach"), the initialization
of c->x86_phys_bits was moved after this_cpu->c_early_init(c). This is
incorrect because early_init_amd() expected to be able to reduce the
value according to the contents of CPUID leaf 0x8000001f.
Fortunately, the bug was negated by init_amd()'s call to early_init_amd(),
which does reduce x86_phys_bits in the end. However, this is very
late in the boot process and, most notably, the wrong value is used for
x86_phys_bits when setting up MTRRs.
To fix this, call get_cpu_address_sizes() as soon as X86_FEATURE_CPUID is
set/cleared, and c->extended_cpuid_level is retrieved.
Fixes: fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-2-pbonzini%40redhat.com
Now that __num_cores_per_package and __num_threads_per_package are
available, cpuinfo::x86_max_cores and the related math all over the place
can be replaced with the ready to consume data.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.176147806@linutronix.de
Expose properly accounted information and accessors so the fiddling with
other topology variables can be replaced.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.120958987@linutronix.de
It's really a non-intuitive name. Rename it to __max_threads_per_core which
is obvious.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210253.011307973@linutronix.de
Replace the logical package and die management functionality and retrieve
the logical IDs from the topology bitmaps.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.901865302@linutronix.de
Now that all possible APIC IDs are tracked in the topology bitmaps, its
trivial to retrieve the real information from there.
This gets rid of the guesstimates for the maximal packages and dies per
package as the actual numbers can be determined before a single AP has been
brought up.
The number of SMT threads can now be determined correctly from the bitmaps
in all situations. Up to now a system which has SMT disabled in the BIOS
will still claim that it is SMT capable, because the lowest APIC ID bit is
reserved for that and CPUID leaf 0xb/0x1f still enumerates the SMT domain
accordingly. By calculating the bitmap weights of the SMT and the CORE
domain and setting them into relation the SMT disabled in BIOS situation
reports correctly that the system is not SMT capable.
It also handles the situation correctly when a hybrid systems boot CPU does
not have SMT as it takes the SMT capability of the APs fully into account.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210252.681709880@linutronix.de
