Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgy9WARHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1jJSw/+OW2zvAx602doujBIE17vFLU7R10Xwj5H
lVgomkWCoTNscUZPhdT/iI+/kQF1fG8PtN9oZKUsTAUswldKJsqu7KevobviesiW
qI+FqH/fhHaIk7GVh9VP65Dgrdki8zsgd7BFxD8pLRBlbZTxTxXNNkuNJrs6LxJh
SxWp/FVtKo6Wd57qlUcsdo0tilAfcuhlEweFUarX55X2ouhdeHjcGNpxj9dHKOh8
M7R5yMYFrpfdpSms+WaCnKKahWHaIQtQTsPAyKwoVdtfl1kK+7NgaCF55Gbo3ogp
r59JwC/CGruDa5QnnDizCwFIwpZw9M52Q1NhP/eLEZbDGB4Yya3b5NW+Ya+6rPvO
ZZC3e1uUmlxW3lrYflUHurnwrVb2GjkQZOdf0gfnly/7LljIicIS2dk4qIQF9NBd
sQPpW5hjmIz9CsfeL8QaJW38pQyMsQWznFuz4YVuHcLHvleb3hR+n4fNfV5Lx9bw
oirVETSIT5hy/msAgShPqTqFUEiVCgp16ow20YstxxzFu/FQ+VG987tkeUyFkPMe
q1v5yF1hty+TkM4naKendIZ/MJnsrv0AxaegFz9YQrKGL1UPiOajQbSyKbzbto7+
ozmtN0W80E8n4oQq008j8htpgIhDV91UjF5m33qB82uSqKihHPPTsVcbeg5nZwh2
ti5g/a1jk94=
=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to
the Intel driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the
x86 and PowerPC platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker,
Ian Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang,
Sandipan Das, Thorsten Blum)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tPRs
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
The throttle support has been added in the generic code. Remove
the driver-specific throttle support.
Besides the throttle, perf_event_overflow may return true because of
event_limit. It already does an inatomic event disable. The pmu->stop
is not required either.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250520181644.2673067-4-kan.liang@linux.intel.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The perf_sample_data_init() has already set the period of sample, so no
need to do it again.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250506094907.2724-1-changbin.du@huawei.com
Currently, using PEBS-via-PT with a sample frequency instead of a sample
period, causes a segfault. For example:
BUG: kernel NULL pointer dereference, address: 0000000000000195
<NMI>
? __die_body.cold+0x19/0x27
? page_fault_oops+0xca/0x290
? exc_page_fault+0x7e/0x1b0
? asm_exc_page_fault+0x26/0x30
? intel_pmu_pebs_event_update_no_drain+0x40/0x60
? intel_pmu_pebs_event_update_no_drain+0x32/0x60
intel_pmu_drain_pebs_icl+0x333/0x350
handle_pmi_common+0x272/0x3c0
intel_pmu_handle_irq+0x10a/0x2e0
perf_event_nmi_handler+0x2a/0x50
That happens because intel_pmu_pebs_event_update_no_drain() assumes all the
pebs_enabled bits represent counter indexes, which is not always the case.
In this particular case, bits 60 and 61 are set for PEBS-via-PT purposes.
The behaviour of PEBS-via-PT with sample frequency is questionable because
although a PMI is generated (PEBS_PMI_AFTER_EACH_RECORD), the period is not
adjusted anyway.
Putting that aside, fix intel_pmu_pebs_event_update_no_drain() by passing
the mask of counter bits instead of 'size'. Note, prior to the Fixes
commit, 'size' would be limited to the maximum counter index, so the issue
was not hit.
Fixes: 722e42e45c ("perf/x86: Support counter mask")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250508134452.73960-1-adrian.hunter@intel.com
Functions offer type safety and better readability compared to macros.
Additionally, always inline functions can match the performance of
macros. Converting the rdpmc() macro into an always inline function
is simple and straightforward, so just make the change.
Moreover, the read result is now the returned value, further enhancing
readability.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250427092027.1598740-6-xin@zytor.com
For historic reasons there are some TSC-related functions in the
<asm/msr.h> header, even though there's an <asm/tsc.h> header.
To facilitate the relocation of rdtsc{,_ordered}() from <asm/msr.h>
to <asm/tsc.h> and to eventually eliminate the inclusion of
<asm/msr.h> in <asm/tsc.h>, add an explicit <asm/msr.h> dependency
to the source files that reference definitions from <asm/msr.h>.
[ mingo: Clarified the changelog. ]
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20250501054241.1245648-1-xin@zytor.com
The counter backwards may be observed in the PMI handler when
counters-snapshotting some non-precise events in the freq mode.
For the non-precise events, it's possible the counters-snapshotting
records a positive value for an overflowed PEBS event. Then the HW
auto-reload mechanism reset the counter to 0 immediately. Because the
pebs_event_reset is cleared in the freq mode, which doesn't set the
PERF_X86_EVENT_AUTO_RELOAD.
In the PMI handler, 0 will be read rather than the positive value
recorded in the counters-snapshotting record.
The counters-snapshotting case has to be specially handled. Since the
event value has been updated when processing the counters-snapshotting
record, only needs to set the new period for the counter via
x86_pmu_set_period().
Fixes: e02e9b0374 ("perf/x86/intel: Support PEBS counters snapshotting")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250424134718.311934-6-kan.liang@linux.intel.com
Arch-PEBS retires IA32_PEBS_ENABLE and MSR_PEBS_DATA_CFG MSRs, so
intel_pmu_pebs_enable/disable() and intel_pmu_pebs_enable/disable_all()
are not needed to call for ach-PEBS.
To make the code cleaner, introduce static calls
x86_pmu_pebs_enable/disable() and x86_pmu_pebs_enable/disable_all()
instead of adding "x86_pmu.arch_pebs" check directly in these helpers.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-7-dapeng1.mi@linux.intel.com
Since architectural PEBS would be introduced in subsequent patches,
rename x86_pmu.pebs to x86_pmu.ds_pebs for distinguishing with the
upcoming architectural PEBS.
Besides restrict reserve_ds_buffers() helper to work only for the
legacy DS based PEBS and avoid it to corrupt the pebs_active flag and
release PEBS buffer incorrectly for arch-PEBS since the later patch
would reuse these flags and alloc/release_pebs_buffer() helpers for
arch-PEBS.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-6-dapeng1.mi@linux.intel.com
Move x86_pmu.bts flag initialization into bts_init() from
intel_ds_init() and rename intel_ds_init() to intel_pebs_init() since it
fully initializes PEBS now after removing the x86_pmu.bts
initialization.
It's safe to move x86_pmu.bts into bts_init() since all x86_pmu.bts flag
are called after bts_init() execution.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20250415114428.341182-5-dapeng1.mi@linux.intel.com
Currently when a user samples user space GPRs (--user-regs option) with
PEBS, the user space GPRs actually always come from software PMI
instead of from PEBS hardware. This leads to the sampled GPRs to
possibly be inaccurate for single PEBS record case because of the
skid between counter overflow and GPRs sampling on PMI.
For the large PEBS case, it is even worse. If user sets the
exclude_kernel attribute, large PEBS would be used to sample user space
GPRs, but since PEBS GPRs group is not really enabled, it leads to all
samples in the large PEBS record to share the same piece of user space
GPRs, like this reproducer shows:
$ perf record -e branches:pu --user-regs=ip,ax -c 100000 ./foo
$ perf report -D | grep "AX"
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
.... AX 0x000000003a0d4ead
So enable GPRs group for user space GPRs sampling and prioritize reading
GPRs from PEBS. If the PEBS sampled GPRs is not user space GPRs (single
PEBS record case), perf_sample_regs_user() modifies them to user space
GPRs.
[ mingo: Clarified the changelog. ]
Fixes: c22497f583 ("perf/x86/intel: Support adaptive PEBS v4")
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250415104135.318169-2-dapeng1.mi@linux.intel.com
When a machine supports PEBS v6, perf unconditionally searches the
cpuc->event_list[] for every event and check if the late setup is
required, which is unnecessary.
The late setup is only required for special events, e.g., events support
counters snapshotting feature. Add n_late_setup to track the num of
events that needs the late setup.
Other features, e.g., auto counter reload feature, require the late
setup as well. Add a wrapper, intel_pmu_pebs_late_setup, for the events
that support counters snapshotting feature.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://lkml.kernel.org/r/20250327195217.2683619-3-kan.liang@linux.intel.com
According to the latest event list, update the event constraint tables
for Lion Cove core.
The general rule (the event codes < 0x90 are restricted to counters
0-3.) has been removed. There is no restriction for most of the
performance monitoring events.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Reported-by: Amiri Khalil <amiri.khalil@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250219141005.2446823-1-kan.liang@linux.intel.com
The PEBS-via-PT feature is exposed for the e-core of some hybrid
platforms, e.g., ADL and MTL. But it never works.
$ dmesg | grep PEBS
[ 1.793888] core: cpu_atom PMU driver: PEBS-via-PT
$ perf record -c 1000 -e '{intel_pt/branch=0/,
cpu_atom/cpu-cycles,aux-output/pp}' -C8
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (cpu_atom/cpu-cycles,aux-output/pp).
"dmesg | grep -i perf" may provide additional information.
The "PEBS-via-PT" is printed if the corresponding bit of per-PMU
capabilities is set. Since the feature is supported by the e-core HW,
perf sets the bit for e-core. However, for Intel PT, if a feature is not
supported on all CPUs, it is not supported at all. The PEBS-via-PT event
cannot be created successfully.
The PEBS-via-PT is no longer enumerated on the latest hybrid platform. It
will be deprecated on future platforms with Arch PEBS. Let's remove it
from the existing hybrid platforms.
Fixes: d9977c43bf ("perf/x86: Register hybrid PMUs")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250129154820.3755948-2-kan.liang@linux.intel.com
The counters snapshotting is a new adaptive PEBS extension, which can
capture programmable counters, fixed-function counters, and performance
metrics in a PEBS record. The feature is available in the PEBS format
V6.
The target counters can be configured in the new fields of MSR_PEBS_CFG.
Then the PEBS HW will generate the bit mask of counters (Counters Group
Header) followed by the content of all the requested counters into a
PEBS record.
The current Linux perf sample read feature can read all events in the
group when any event in the group is overflowed. But the rdpmc in the
NMI/overflow handler has a small gap from overflow. Also, there is some
overhead for each rdpmc read. The counters snapshotting feature can be
used as an accurate and low-overhead replacement.
Extend intel_update_topdown_event() to accept the value from PEBS
records.
Add a new PEBS_CNTR flag to indicate a sample read group that utilizes
the counters snapshotting feature. When the group is scheduled, the
PEBS configure can be updated accordingly.
To prevent the case that a PEBS record value might be in the past
relative to what is already in the event, perf always stops the PMU and
drains the PEBS buffer before updating the corresponding event->count.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250121152303.3128733-4-kan.liang@linux.intel.com
The WARN_ON(this_cpu_read(cpu_hw_events.enabled)) in the
intel_pmu_save_and_restart_reload() is triggered, when sampling read
topdown events.
In a NMI handler, the cpu_hw_events.enabled is set and used to indicate
the status of core PMU. The generic pmu->pmu_disable_count, updated in
the perf_pmu_disable/enable pair, is not touched.
However, the perf_pmu_disable/enable pair is invoked when sampling read
in a NMI handler. The cpuc->enabled is mistakenly set by the
perf_pmu_enable().
Avoid disabling PMU if the core PMU is already disabled.
Merge the logic together.
Fixes: 7b2c05a15d ("perf/x86/intel: Generic support for hardware TopDown metrics")
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-2-kan.liang@linux.intel.com
The x86_pmu_drain_pebs static call was introduced in commit 7c9903c9bf
("x86/perf, static_call: Optimize x86_pmu methods"), but it's not really
used to replace the old method.
Apply the static call for drain_pebs.
Fixes: 7c9903c9bf ("x86/perf, static_call: Optimize x86_pmu methods")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250121152303.3128733-1-kan.liang@linux.intel.com
- Seqlock optimizations that arose in a perf context and were
merged into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount ((Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
- Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages
in advance (Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin Cui)
- Export perf_exclude_event() (Namhyung Kim)
- Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
- AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
- AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
- Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
- Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=c8XB
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Seqlock optimizations that arose in a perf context and were merged
into the perf tree:
- seqlock: Add raw_seqcount_try_begin (Suren Baghdasaryan)
- mm: Convert mm_lock_seq to a proper seqcount (Suren Baghdasaryan)
- mm: Introduce mmap_lock_speculate_{try_begin|retry} (Suren
Baghdasaryan)
- mm/gup: Use raw_seqcount_try_begin() (Peter Zijlstra)
Core perf enhancements:
- Reduce 'struct page' footprint of perf by mapping pages in advance
(Lorenzo Stoakes)
- Save raw sample data conditionally based on sample type (Yabin Cui)
- Reduce sampling overhead by checking sample_type in
perf_sample_save_callchain() and perf_sample_save_brstack() (Yabin
Cui)
- Export perf_exclude_event() (Namhyung Kim)
Uprobes scalability enhancements: (Andrii Nakryiko)
- Simplify find_active_uprobe_rcu() VMA checks
- Add speculative lockless VMA-to-inode-to-uprobe resolution
- Simplify session consumer tracking
- Decouple return_instance list traversal and freeing
- Ensure return_instance is detached from the list before freeing
- Reuse return_instances between multiple uretprobes within task
- Guard against kmemdup() failing in dup_return_instance()
AMD core PMU driver enhancements:
- Relax privilege filter restriction on AMD IBS (Namhyung Kim)
AMD RAPL energy counters support: (Dhananjay Ugwekar)
- Introduce topology_logical_core_id() (K Prateek Nayak)
- Remove the unused get_rapl_pmu_cpumask() function
- Remove the cpu_to_rapl_pmu() function
- Rename rapl_pmu variables
- Make rapl_model struct global
- Add arguments to the init and cleanup functions
- Modify the generic variable names to *_pkg*
- Remove the global variable rapl_msrs
- Move the cntr_mask to rapl_pmus struct
- Add core energy counter support for AMD CPUs
Intel core PMU driver enhancements:
- Support RDPMC 'metrics clear mode' feature (Kan Liang)
- Clarify adaptive PEBS processing (Kan Liang)
- Factor out functions for PEBS records processing (Kan Liang)
- Simplify the PEBS records processing for adaptive PEBS (Kan Liang)
Intel uncore driver enhancements: (Kan Liang)
- Convert buggy pmu->func_id use to pmu->registered
- Support more units on Granite Rapids"
* tag 'perf-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
perf: map pages in advance
perf/x86/intel/uncore: Support more units on Granite Rapids
perf/x86/intel/uncore: Clean up func_id
perf/x86/intel: Support RDPMC metrics clear mode
uprobes: Guard against kmemdup() failing in dup_return_instance()
perf/x86: Relax privilege filter restriction on AMD IBS
perf/core: Export perf_exclude_event()
uprobes: Reuse return_instances between multiple uretprobes within task
uprobes: Ensure return_instance is detached from the list before freeing
uprobes: Decouple return_instance list traversal and freeing
uprobes: Simplify session consumer tracking
uprobes: add speculative lockless VMA-to-inode-to-uprobe resolution
uprobes: simplify find_active_uprobe_rcu() VMA checks
mm: introduce mmap_lock_speculate_{try_begin|retry}
mm: convert mm_lock_seq to a proper seqcount
mm/gup: Use raw_seqcount_try_begin()
seqlock: add raw_seqcount_try_begin
perf/x86/rapl: Add core energy counter support for AMD CPUs
perf/x86/rapl: Move the cntr_mask to rapl_pmus struct
perf/x86/rapl: Remove the global variable rapl_msrs
...
The only difference between 5 and 6 is the new counters snapshotting
group, without the following counters snapshotting enabling patches,
it's impossible to utilize the feature in a PEBS record. It's safe to
share the same code path with format 5.
Add format 6, so the end user can at least utilize the legacy PEBS
features.
Fixes: a932aa0e86 ("perf/x86: Add Lunar Lake and Arrow Lake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241216204505.748363-1-kan.liang@linux.intel.com
The current code may iterate all the PEBS records in the DS area several
times. The first loop is to find all active events and calculate the
available records for each event. Then iterate the whole buffer again
and again to process available records until all active events are
processed.
The algorithm is inherited from the old generations. The old PEBS
hardware does not deal well with the situation when events happen near
each other. SW has to drop the error records. Multiple iterations are
required.
The hardware limit has been addressed on newer platforms with adaptive
PEBS. A simple one-iteration algorithm is introduced.
The samples are output by record order with the patch, rather than the
event order. It doesn't impact the post-processing. The perf tool always
sorts the records by time before presenting them to the end user.
In an NMI, the last record has to be specially handled. Add a last[]
variable to track the last unprocessed record of each event.
Test:
11 PEBS events are used in the perf test. Only the basic information is
collected.
perf record -e instructions:up,...,instructions:up -c 2000003 benchmark
The ftrace is used to record the duration of the
intel_pmu_drain_pebs_icl().
The average duration reduced from 62.04us to 57.94us.
A small improvement can be observed with the new algorithm.
Also, the implementation becomes simpler and more straightforward.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20241119135504.1463839-5-kan.liang@linux.intel.com
Factor out functions to process normal and the last PEBS records, which
can be shared with the later patch.
Move the event updating related codes (intel_pmu_save_and_restart())
to the end, where all samples have been processed.
For the current usage, it doesn't matter when perf updates event counts
and reset the counter. Because all counters are stopped when the PEBS
buffer is drained.
Drop the return of the !intel_pmu_save_and_restart(event) check. Because
it never happen. The intel_pmu_save_and_restart(event) only returns 0,
when !hwc->event_base or the period_left > 0.
- The !hwc->event_base is impossible for the PEBS event, since the PEBS
event is only available on GP and fixed counters, which always have
a valid hwc->event_base.
- The check only happens for the case of non-AUTO_RELOAD and single
PEBS, which implies that the event must be overflowed. The period_left
must be always <= 0 for an overflowed event after the
x86_pmu_update().
Co-developed-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119135504.1463839-4-kan.liang@linux.intel.com
Modify the pebs_basic and pebs_meminfo structs to make the bitfields
more explicit to ease readability of the code.
Co-developed-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119135504.1463839-3-kan.liang@linux.intel.com
The PEBS kernel warnings can still be observed with the below case.
when the below commands are running in parallel for a while.
while true;
do
perf record --no-buildid -a --intr-regs=AX \
-e cpu/event=0xd0,umask=0x81/pp \
-c 10003 -o /dev/null ./triad;
done &
while true;
do
perf record -e 'cpu/mem-loads,ldlat=3/uP' -W -d -- ./dtlb
done
The commit b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing
PEBS_DATA_CFG") intends to flush the entire PEBS buffer before the
hardware is reprogrammed. However, it fails in the above case.
The first perf command utilizes the large PEBS, while the second perf
command only utilizes a single PEBS. When the second perf event is
added, only the n_pebs++. The intel_pmu_pebs_enable() is invoked after
intel_pmu_pebs_add(). So the cpuc->n_pebs == cpuc->n_large_pebs check in
the intel_pmu_drain_large_pebs() fails. The PEBS DS is not flushed.
The new PEBS event should not be taken into account when flushing the
existing PEBS DS.
The check is unnecessary here. Before the hardware is reprogrammed, all
the stale records must be drained unconditionally.
For single PEBS or PEBS-vi-pt, the DS must be empty. The drain_pebs()
can handle the empty case. There is no harm to unconditionally drain the
PEBS DS.
Fixes: b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20241119135504.1463839-2-kan.liang@linux.intel.com
Check sample_type in perf_sample_save_brstack() to prevent
saving branch stack data when it isn't required.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-4-yabinc@google.com
Check sample_type in perf_sample_save_callchain() to prevent
saving callchain data when it isn't required.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Yabin Cui <yabinc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240515193610.2350456-3-yabinc@google.com
ArrowLake-H contains 3 different uarchs, LionCove, Skymont and Crestmont.
It is different with previous hybrid processors which only contains two
kinds of uarchs.
This patch adds PMU support for ArrowLake-H processor, adds ARL-H
specific events which supports the 3 kinds of uarchs, such as
td_retiring_arl_h, and extends some existed format attributes like
offcore_rsp to make them be available to support ARL-H as well. Althrough
these format attributes like offcore_rsp have been extended to support
ARL-H, they can still support the regular hybrid platforms with 2 kinds
of uarchs since the helper hybrid_format_is_visible() would filter PMU
types and only show the format attribute for available PMUs.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Link: https://lkml.kernel.org/r/20240820073853.1974746-5-dapeng1.mi@linux.intel.com
A non-0 retire latency can be observed on a Raptorlake which doesn't
support the retire latency feature.
By design, the retire latency shares the PERF_SAMPLE_WEIGHT_STRUCT
sample type with other types of latency. That could avoid adding too
many different sample types to support all kinds of latency. For the
machine which doesn't support some kind of latency, 0 should be
returned.
Perf doesn’t clear/init all the fields of a sample data for the sake
of performance. It expects the later perf_{prepare,output}_sample() to
update the uninitialized field. However, the current implementation
doesn't touch the field of the retire latency if the feature is not
supported. The memory garbage is dumped into the perf data.
Clear the retire latency if the feature is not supported.
Fixes: c87a31093c ("perf/x86: Support Retire Latency")
Reported-by: "Bayduraev, Alexey V" <alexey.v.bayduraev@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Bayduraev, Alexey V" <alexey.v.bayduraev@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20240708193336.1192217-4-kan.liang@linux.intel.com
A new PEBS data source format is introduced for the p-core of Lunar
Lake. The data source field is extended to 8 bits with new encodings.
A new layout is introduced into the union intel_x86_pebs_dse.
Introduce the lnl_latency_data() to parse the new format.
Enlarge the pebs_data_source[] accordingly to include new encodings.
Only the mem load and the mem store events can generate the data source.
Introduce INTEL_HYBRID_LDLAT_CONSTRAINT and
INTEL_HYBRID_STLAT_CONSTRAINT to mark them.
Add two new bits for the new cache-related data src, L2_MHB and MSC.
The L2_MHB is short for L2 Miss Handling Buffer, which is similar to
LFB (Line Fill Buffer), but to track the L2 Cache misses.
The MSC stands for the memory-side cache.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-6-kan.liang@linux.intel.com
The model-specific pebs_latency_data functions of ADL and MTL use the
"small" as a postfix to indicate the e-core. The postfix is too generic
for a model-specific function. It cannot provide useful information that
can directly map it to a specific uarch, which can facilitate the
development and maintenance.
Use the abbr of the uarch to rename the model-specific functions.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-5-kan.liang@linux.intel.com
From PMU's perspective, Lunar Lake and Arrow Lake are similar to the
previous generation Meteor Lake. Both are hybrid platforms, with e-core
and p-core.
The key differences include:
- The e-core supports 3 new fixed counters
- The p-core supports an updated PEBS Data Source format
- More GP counters (Updated event constraint table)
- New Architectural performance monitoring V6
(New Perfmon MSRs aliasing, umask2, eq).
- New PEBS format V6 (Counters Snapshotting group)
- New RDPMC metrics clear mode
The legacy features, the 3 new fixed counters and updated event
constraint table are enabled in this patch.
The new PEBS data source format, the architectural performance
monitoring V6, the PEBS format V6, and the new RDPMC metrics clear mode
are supported in the following patches.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-4-kan.liang@linux.intel.com
The current perf assumes that both GP and fixed counters are contiguous.
But it's not guaranteed on newer Intel platforms or in a virtualization
environment.
Use the counter mask to replace the number of counters for both GP and
the fixed counters. For the other ARCHs or old platforms which don't
support a counter mask, using GENMASK_ULL(num_counter - 1, 0) to
replace. There is no functional change for them.
The interface to KVM is not changed. The number of counters still be
passed to KVM. It can be updated later separately.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-3-kan.liang@linux.intel.com
The current perf assumes that the counters that support PEBS are
contiguous. But it's not guaranteed with the new leaf 0x23 introduced.
The counters are enumerated with a counter mask. There may be holes in
the counter mask for future platforms or in a virtualization
environment.
Store the PEBS event mask rather than the maximum number of PEBS
counters in the x86 PMU structures.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/r/20240626143545.480761-2-kan.liang@linux.intel.com
The MSR_PEBS_DATA_CFG MSR register is used to configure which data groups
should be generated into a PEBS record, and it's shared among all counters.
If there are different configurations among counters, perf combines all the
configurations.
The first perf command as below requires a complete PEBS record
(including memory info, GPRs, XMMs, and LBRs). The second perf command
only requires a basic group. However, after the second perf command is
running, the MSR_PEBS_DATA_CFG register is cleared. Only a basic group is
generated in a PEBS record, which is wrong. The required information
for the first perf command is missed.
$ perf record --intr-regs=AX,SP,XMM0 -a -C 8 -b -W -d -c 100000003 -o /dev/null -e cpu/event=0xd0,umask=0x81/upp &
$ sleep 5
$ perf record --per-thread -c 1 -e cycles:pp --no-timestamp --no-tid taskset -c 8 ./noploop 1000
The first PEBS event is a system-wide PEBS event. The second PEBS event
is a per-thread event. When the thread is scheduled out, the
intel_pmu_pebs_del() function is invoked to update the PEBS state.
Since the system-wide event is still available, the cpuc->n_pebs is 1.
The cpuc->pebs_data_cfg is cleared. The data configuration for the
system-wide PEBS event is lost.
The (cpuc->n_pebs == 1) check was introduced in commit:
b6a32f023f ("perf/x86: Fix PEBS threshold initialization")
At that time, it indeed didn't hurt whether the state was updated
during the removal, because only the threshold is updated.
The calculation of the threshold takes the last PEBS event into
account.
However, since commit:
b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
we delay the threshold update, and clear the PEBS data config, which triggers
the bug.
The PEBS data config update scope should not be shrunk during removal.
[ mingo: Improved the changelog & comments. ]
Fixes: b752ea0c28 ("perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG")
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240401133320.703971-1-kan.liang@linux.intel.com
To clean up the per CPU insanity of UP which causes sparse to be rightfully
unhappy and prevents the usage of the generic per CPU accessors on cpu_info
it is necessary to include <linux/percpu.h> into <asm/msr.h>.
Including <linux/percpu.h> into <asm/msr.h> is impossible because it ends
up in header dependency hell. The problem is that <asm/processor.h>
includes <asm/msr.h>. The inclusion of <linux/percpu.h> results in a
compile fail where the compiler cannot longer handle an include in
<asm/cpufeature.h> which references boot_cpu_data which is
defined in <asm/processor.h>.
The only reason why <asm/msr.h> is included in <asm/processor.h> are the
set/get_debugctlmsr() inlines. They are defined there because <asm/processor.h>
is such a nice dump ground for everything. In fact they belong obviously
into <asm/debugreg.h>.
Move them to <asm/debugreg.h> and fix up the resulting damage which is just
exposing the reliance on random include chains.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240304005104.454678686@linutronix.de
The branch counters logging (A.K.A LBR event logging) introduces a
per-counter indication of precise event occurrences in LBRs. It can
provide a means to attribute exposed retirement latency to combinations
of events across a block of instructions. It also provides a means of
attributing Timed LBR latencies to events.
The feature is first introduced on SRF/GRR. It is an enhancement of the
ARCH LBR. It adds new fields in the LBR_INFO MSRs to log the occurrences
of events on the GP counters. The information is displayed by the order
of counters.
The design proposed in this patch requires that the events which are
logged must be in a group with the event that has LBR. If there are
more than one LBR group, the counters logging information only from the
current group (overflowed) are stored for the perf tool, otherwise the
perf tool cannot know which and when other groups are scheduled
especially when multiplexing is triggered. The user can ensure it uses
the maximum number of counters that support LBR info (4 by now) by
making the group large enough.
The HW only logs events by the order of counters. The order may be
different from the order of enabling which the perf tool can understand.
When parsing the information of each branch entry, convert the counter
order to the enabled order, and store the enabled order in the extension
space.
Unconditionally reset LBRs for an LBR event group when it's deleted. The
logged counter information is only valid for the current LBR group. If
another LBR group is scheduled later, the information from the stale
LBRs would be otherwise wrongly interpreted.
Add a sanity check in intel_pmu_hw_config(). Disable the feature if other
counter filters (inv, cmask, edge, in_tx) are set or LBR call stack mode
is enabled. (For the LBR call stack mode, we cannot simply flush the
LBR, since it will break the call stack. Also, there is no obvious usage
with the call stack mode for now.)
Only applying the PERF_SAMPLE_BRANCH_COUNTERS doesn't require any branch
stack setup.
Expose the maximum number of supported counters and the width of the
counters into the sysfs. The perf tool can use the information to parse
the logged counters in each branch.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-5-kan.liang@linux.intel.com
Currently, the additional information of a branch entry is stored in a
u64 space. With more and more information added, the space is running
out. For example, the information of occurrences of events will be added
for each branch.
Two places were suggested to append the counters.
https://lore.kernel.org/lkml/20230802215814.GH231007@hirez.programming.kicks-ass.net/
One place is right after the flags of each branch entry. It changes the
existing struct perf_branch_entry. The later ARCH specific
implementation has to be really careful to consistently pick
the right struct.
The other place is right after the entire struct perf_branch_stack.
The disadvantage is that the pointer of the extra space has to be
recorded. The common interface perf_sample_save_brstack() has to be
updated.
The latter is much straightforward, and should be easily understood and
maintained. It is implemented in the patch.
Add a new branch sample type, PERF_SAMPLE_BRANCH_COUNTERS, to indicate
the event which is recorded in the branch info.
The "u64 counters" may store the occurrences of several events. The
information regarding the number of events/counters and the width of
each counter should be exposed via sysfs as a reference for the perf
tool. Define the branch_counter_nr and branch_counter_width ABI here.
The support will be implemented later in the Intel-specific patch.
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231025201626.3000228-1-kan.liang@linux.intel.com
There is a fairly long list of grievances about the current code. The
main beefs:
1. hybrid_big_small assumes that the *HARDWARE* (CPUID) provided
core types are a bitmap. They are not. If Intel happened to
make a core type of 0xff, hilarity would ensue.
2. adl_get_hybrid_cpu_type() utterly inscrutable. There are
precisely zero comments and zero changelog about what it is
attempting to do.
According to Kan, the adl_get_hybrid_cpu_type() is there because some
Alder Lake (ADL) CPUs can do some silly things. Some ADL models are
*supposed* to be hybrid CPUs with big and little cores, but there are
some SKUs that only have big cores. CPUID(0x1a) on those CPUs does
not say that the CPUs are big cores. It apparently just returns 0x0.
It confuses perf because it expects to see either 0x40 (Core) or
0x20 (Atom).
The perf workaround for this is to watch for a CPU core saying it is
type 0x0. If that happens on an Alder Lake, it calls
x86_pmu.get_hybrid_cpu_type() and just assumes that the core is a
Core (0x40) CPU.
To fix up the mess, separate out the CPU types and the 'pmu' types.
This allows 'hybrid_pmu_type' bitmaps without worrying that some
future CPU type will set multiple bits.
Since the types are now separate, add a function to glue them back
together again. Actual comment on the situation in the glue
function (find_hybrid_pmu_for_cpu()).
Also, give ->get_hybrid_cpu_type() a real return type and make it
clear that it is overriding the *CPU* type, not the PMU type.
Rename cpu_type to pmu_type in the struct x86_hybrid_pmu to reflect the
change.
Originally-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-6-kan.liang@linux.intel.com
From PMU's perspective, the SPR/GNR server has a similar uarch to the
ADL/MTL client p-core. Many functions are shared. However, the shared
function name uses the abbreviation of the server product code name,
rather than the common uarch code name.
Rename these internal shared functions by the common uarch name.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230829125806.3016082-2-kan.liang@linux.intel.com
The Grand Ridge and Sierra Forest are successors to Snow Ridge. They
both have Crestmont core. From the core PMU's perspective, they are
similar to the e-core of MTL. The only difference is the LBR event
logging feature, which will be implemented in the following patches.
Create a non-hybrid PMU setup for Grand Ridge and Sierra Forest.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20230522113040.2329924-1-kan.liang@linux.intel.com
