mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
4839 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
beace86e61 |
Summary of significant series in this pull request:
- The 4 patch series "mm: ksm: prevent KSM from breaking merging of new
VMAs" from Lorenzo Stoakes addresses an issue with KSM's
PR_SET_MEMORY_MERGE mode: newly mapped VMAs were not eligible for
merging with existing adjacent VMAs.
- The 4 patch series "mm/damon: introduce DAMON_STAT for simple and
practical access monitoring" from SeongJae Park adds a new kernel module
which simplifies the setup and usage of DAMON in production
environments.
- The 6 patch series "stop passing a writeback_control to swap/shmem
writeout" from Christoph Hellwig is a cleanup to the writeback code
which removes a couple of pointers from struct writeback_control.
- The 7 patch series "drivers/base/node.c: optimization and cleanups"
from Donet Tom contains largely uncorrelated cleanups to the NUMA node
setup and management code.
- The 4 patch series "mm: userfaultfd: assorted fixes and cleanups" from
Tal Zussman does some maintenance work on the userfaultfd code.
- The 5 patch series "Readahead tweaks for larger folios" from Ryan
Roberts implements some tuneups for pagecache readahead when it is
reading into order>0 folios.
- The 4 patch series "selftests/mm: Tweaks to the cow test" from Mark
Brown provides some cleanups and consistency improvements to the
selftests code.
- The 4 patch series "Optimize mremap() for large folios" from Dev Jain
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
- The 5 patch series "Remove zero_user()" from Matthew Wilcox expunges
zero_user() in favor of the more modern memzero_page().
- The 3 patch series "mm/huge_memory: vmf_insert_folio_*() and
vmf_insert_pfn_pud() fixes" from David Hildenbrand addresses some warts
which David noticed in the huge page code. These were not known to be
causing any issues at this time.
- The 3 patch series "mm/damon: use alloc_migrate_target() for
DAMOS_MIGRATE_{HOT,COLD" from SeongJae Park provides some cleanup and
consolidation work in DAMON.
- The 3 patch series "use vm_flags_t consistently" from Lorenzo Stoakes
uses vm_flags_t in places where we were inappropriately using other
types.
- The 3 patch series "mm/memfd: Reserve hugetlb folios before
allocation" from Vivek Kasireddy increases the reliability of large page
allocation in the memfd code.
- The 14 patch series "mm: Remove pXX_devmap page table bit and pfn_t
type" from Alistair Popple removes several now-unneeded PFN_* flags.
- The 5 patch series "mm/damon: decouple sysfs from core" from SeongJae
Park implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
- The 5 patch series "madvise cleanup" from Lorenzo Stoakes does quite a
lot of cleanup/maintenance work in the madvise() code.
- The 4 patch series "madvise anon_name cleanups" from Vlastimil Babka
provides additional cleanups on top or Lorenzo's effort.
- The 11 patch series "Implement numa node notifier" from Oscar Salvador
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory on/offline
notifier.
- The 6 patch series "Make MIGRATE_ISOLATE a standalone bit" from Zi Yan
cleans up the pageblock isolation code and fixes a potential issue which
doesn't seem to cause any problems in practice.
- The 5 patch series "selftests/damon: add python and drgn based DAMON
sysfs functionality tests" from SeongJae Park adds additional drgn- and
python-based DAMON selftests which are more comprehensive than the
existing selftest suite.
- The 5 patch series "Misc rework on hugetlb faulting path" from Oscar
Salvador fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
- The 3 patch series "cma: factor out allocation logic from
__cma_declare_contiguous_nid" from Mike Rapoport rationalizes and cleans
up the highmem-specific code in the CMA allocator.
- The 28 patch series "mm/migration: rework movable_ops page migration
(part 1)" from David Hildenbrand provides cleanups and
future-preparedness to the migration code.
- The 2 patch series "mm/damon: add trace events for auto-tuned
monitoring intervals and DAMOS quota" from SeongJae Park adds some
tracepoints to some DAMON auto-tuning code.
- The 6 patch series "mm/damon: fix misc bugs in DAMON modules" from
SeongJae Park does that.
- The 6 patch series "mm/damon: misc cleanups" from SeongJae Park also
does what it claims.
- The 4 patch series "mm: folio_pte_batch() improvements" from David
Hildenbrand cleans up the large folio PTE batching code.
- The 13 patch series "mm/damon/vaddr: Allow interleaving in
migrate_{hot,cold} actions" from SeongJae Park facilitates dynamic
alteration of DAMON's inter-node allocation policy.
- The 3 patch series "Remove unmap_and_put_page()" from Vishal Moola
provides a couple of page->folio conversions.
- The 4 patch series "mm: per-node proactive reclaim" from Davidlohr
Bueso implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
- The 14 patch series "mm/damon: remove damon_callback" from SeongJae
Park replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
- The 10 patch series "mm/mremap: permit mremap() move of multiple VMAs"
from Lorenzo Stoakes implements a number of mremap cleanups (of course)
in preparation for adding new mremap() functionality: newly permit the
remapping of multiple VMAs when the user is specifying MREMAP_FIXED. It
still excludes some specialized situations where this cannot be
performed reliably.
- The 3 patch series "drop hugetlb_free_pgd_range()" from Anthony Yznaga
switches some sparc hugetlb code over to the generic version and removes
the thus-unneeded hugetlb_free_pgd_range().
- The 4 patch series "mm/damon/sysfs: support periodic and automated
stats update" from SeongJae Park augments the present
userspace-requested update of DAMON sysfs monitoring files. Automatic
update is now provided, along with a tunable to control the update
interval.
- The 4 patch series "Some randome fixes and cleanups to swapfile" from
Kemeng Shi does what is claims.
- The 4 patch series "mm: introduce snapshot_page" from Luiz Capitulino
and David Hildenbrand provides (and uses) a means by which debug-style
functions can grab a copy of a pageframe and inspect it locklessly
without tripping over the races inherent in operating on the live
pageframe directly.
- The 6 patch series "use per-vma locks for /proc/pid/maps reads" from
Suren Baghdasaryan addresses the large contention issues which can be
triggered by reads from that procfs file. Latencies are reduced by more
than half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
- The 6 patch series "__folio_split() clean up" from Zi Yan cleans up
__folio_split()!
- The 7 patch series "Optimize mprotect() for large folios" from Dev
Jain provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
- The 2 patch series "selftests/mm: reuse FORCE_READ to replace "asm
volatile("" : "+r" (XXX));" and some cleanup" from wang lian does some
cleanup work in the selftests code.
- The 3 patch series "tools/testing: expand mremap testing" from Lorenzo
Stoakes extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
- The 22 patch series "selftests/damon/sysfs.py: test all parameters"
from SeongJae Park extends the DAMON sysfs interface selftest so that it
tests all possible user-requested parameters. Rather than the present
minimal subset.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaIqcCgAKCRDdBJ7gKXxA
jkVBAQCCn9DR1QP0CRk961ot0cKzOgioSc0aA03DPb2KXRt2kQEAzDAz0ARurFhL
8BzbvI0c+4tntHLXvIlrC33n9KWAOQM=
=XsFy
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
|
||
|
Linus Torvalds
|
90a871f74b |
ftrace changes for v6.17:
- Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. -----BEGIN PGP SIGNATURE----- iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaIkVkRQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qmdxAPsGcyT/gnyX/wf70cI63QoODrlRAd7M tg3R0J0H41U05QD/apttbA9GSdZ8bDLLSFAXTJgr8f4GvYvbUsmu2sMBBA8= =gd9V -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Keep track of when fgraph_ops are registered or not Keep accounting of when fgraph_ops are registered as if a fgraph_ops is registered twice it can mess up the accounting and it will not work as expected later. Trigger a warning if something registers it twice as to catch bugs before they are found by things just not working as expected. - Make DYNAMIC_FTRACE always enabled for architectures that support it As static ftrace (where all functions are always traced) is very expensive and only exists to help architectures support ftrace, do not make it an option. As soon as an architecture supports DYNAMIC_FTRACE make it use it. This simplifies the code. - Remove redundant config HAVE_FTRACE_MCOUNT_RECORD The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. - Make pid_ptr string size match the comment In print_graph_proc() the pid_ptr string is of size 11, but the comment says /* sign + log10(MAX_INT) + '\0' */ which is actually 12. * tag 'ftrace-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD ftrace: Make DYNAMIC_FTRACE always enabled for architectures that support it fgraph: Keep track of when fgraph_ops are registered or not fgraph: Make pid_str size match the comment |
||
|
Linus Torvalds
|
8be4d31cb8 |
Networking changes for 6.17.
Core & protocols
----------------
- Wrap datapath globals into net_aligned_data, to avoid false sharing.
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container).
- Add SO_INQ and SCM_INQ support to AF_UNIX.
- Add SIOCINQ support to AF_VSOCK.
- Add TCP_MAXSEG sockopt to MPTCP.
- Add IPv6 force_forwarding sysctl to enable forwarding per interface.
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB.
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users.
- Convert TCP send queue handling from tasklet to BH workque.
- Improve BPF iteration over TCP sockets to see each socket exactly once.
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code.
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel NAPI
thread when threaded NAPI gets disabled. Previously thread would stick
around until ifdown due to tricky synchronization.
- Allow multicast routing to take effect on locally-generated packets.
- Add output interface argument for End.X in segment routing.
- MCTP: add support for gateway routing, improve bind() handling.
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink.
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed.
- Support NUD_PERMANENT for proxy neighbor entries.
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM.
- Add sequence numbers to netconsole messages. Unregister netconsole's
console when all net targets are removed. Code refactoring.
Add a number of selftests.
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup.
- Support inspecting ref_tracker state via DebugFS.
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links.
- Allow providing upcall pid for the 'execute' command in openvswitch.
- Remove DCCP support from Netfilter's conntrack.
- Disallow multiple packet duplications in the queuing layer.
- Prevent use of deprecated iptables code on PREEMPT_RT.
Driver API
----------
- Support RSS and hashing configuration over ethtool Netlink.
- Add dedicated ethtool callbacks for getting and setting hashing fields.
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc.
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs.
- Support traffic classes in devlink rate API for bandwidth management.
- Remove rtnl_lock dependency from UDP tunnel port configuration.
Device drivers
--------------
- Add a new Broadcom driver for 800G Ethernet (bnge).
- Add a standalone driver for Microchip ZL3073x DPLL.
- Remove IBM's NETIUCV device driver.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is used
by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lqbe
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Wrap datapath globals into net_aligned_data, to avoid false sharing
- Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)
- Add SO_INQ and SCM_INQ support to AF_UNIX
- Add SIOCINQ support to AF_VSOCK
- Add TCP_MAXSEG sockopt to MPTCP
- Add IPv6 force_forwarding sysctl to enable forwarding per interface
- Make TCP validation of whether packet fully fits in the receive
window and the rcv_buf more strict. With increased use of HW
aggregation a single "packet" can be multiple 100s of kB
- Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
improves latency up to 33% for sockmap users
- Convert TCP send queue handling from tasklet to BH workque
- Improve BPF iteration over TCP sockets to see each socket exactly
once
- Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code
- Support enabling kernel threads for NAPI processing on per-NAPI
instance basis rather than a whole device. Fully stop the kernel
NAPI thread when threaded NAPI gets disabled. Previously thread
would stick around until ifdown due to tricky synchronization
- Allow multicast routing to take effect on locally-generated packets
- Add output interface argument for End.X in segment routing
- MCTP: add support for gateway routing, improve bind() handling
- Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink
- Add a new neighbor flag ("extern_valid"), which cedes refresh
responsibilities to userspace. This is needed for EVPN multi-homing
where a neighbor entry for a multi-homed host needs to be synced
across all the VTEPs among which the host is multi-homed
- Support NUD_PERMANENT for proxy neighbor entries
- Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM
- Add sequence numbers to netconsole messages. Unregister
netconsole's console when all net targets are removed. Code
refactoring. Add a number of selftests
- Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
should be used for an inbound SA lookup
- Support inspecting ref_tracker state via DebugFS
- Don't force bonding advertisement frames tx to ~333 ms boundaries.
Add broadcast_neighbor option to send ARP/ND on all bonded links
- Allow providing upcall pid for the 'execute' command in openvswitch
- Remove DCCP support from Netfilter's conntrack
- Disallow multiple packet duplications in the queuing layer
- Prevent use of deprecated iptables code on PREEMPT_RT
Driver API:
- Support RSS and hashing configuration over ethtool Netlink
- Add dedicated ethtool callbacks for getting and setting hashing
fields
- Add support for power budget evaluation strategy in PSE /
Power-over-Ethernet. Generate Netlink events for overcurrent etc
- Support DPLL phase offset monitoring across all device inputs.
Support providing clock reference and SYNC over separate DPLL
inputs
- Support traffic classes in devlink rate API for bandwidth
management
- Remove rtnl_lock dependency from UDP tunnel port configuration
Device drivers:
- Add a new Broadcom driver for 800G Ethernet (bnge)
- Add a standalone driver for Microchip ZL3073x DPLL
- Remove IBM's NETIUCV device driver
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support zero-copy Tx of DMABUF memory
- take page size into account for page pool recycling rings
- Intel (100G, ice, idpf):
- idpf: XDP and AF_XDP support preparations
- idpf: add flow steering
- add link_down_events statistic
- clean up the TSPLL code
- preparations for live VM migration
- nVidia/Mellanox:
- support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
- optimize context memory usage for matchers
- expose serial numbers in devlink info
- support PCIe congestion metrics
- Meta (fbnic):
- add 25G, 50G, and 100G link modes to phylink
- support dumping FW logs
- Marvell/Cavium:
- support for CN20K generation of the Octeon chips
- Amazon:
- add HW clock (without timestamping, just hypervisor time access)
- Ethernet virtual:
- VirtIO net:
- support segmentation of UDP-tunnel-encapsulated packets
- Google (gve):
- support packet timestamping and clock synchronization
- Microsoft vNIC:
- add handler for device-originated servicing events
- allow dynamic MSI-X vector allocation
- support Tx bandwidth clamping
- Ethernet NICs consumer, and embedded:
- AMD:
- amd-xgbe: hardware timestamping and PTP clock support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- use napi_complete_done() return value to support NAPI polling
- add support for re-starting auto-negotiation
- Broadcom switches (b53):
- support BCM5325 switches
- add bcm63xx EPHY power control
- Synopsys (stmmac):
- lots of code refactoring and cleanups
- TI:
- icssg-prueth: read firmware-names from device tree
- icssg: PRP offload support
- Microchip:
- lan78xx: convert to PHYLINK for improved PHY and MAC management
- ksz: add KSZ8463 switch support
- Intel:
- support similar queue priority scheme in multi-queue and
time-sensitive networking (taprio)
- support packet pre-emption in both
- RealTek (r8169):
- enable EEE at 5Gbps on RTL8126
- Airoha:
- add PPPoE offload support
- MDIO bus controller for Airoha AN7583
- Ethernet PHYs:
- support for the IPQ5018 internal GE PHY
- micrel KSZ9477 switch-integrated PHYs:
- add MDI/MDI-X control support
- add RX error counters
- add cable test support
- add Signal Quality Indicator (SQI) reporting
- dp83tg720: improve reset handling and reduce link recovery time
- support bcm54811 (and its MII-Lite interface type)
- air_en8811h: support resume/suspend
- support PHY counters for QCA807x and QCA808x
- support WoL for QCA807x
- CAN drivers:
- rcar_canfd: support for Transceiver Delay Compensation
- kvaser: report FW versions via devlink dev info
- WiFi:
- extended regulatory info support (6 GHz)
- add statistics and beacon monitor for Multi-Link Operation (MLO)
- support S1G aggregation, improve S1G support
- add Radio Measurement action fields
- support per-radio RTS threshold
- some work around how FIPS affects wifi, which was wrong (RC4 is
used by TKIP, not only WEP)
- improvements for unsolicited probe response handling
- WiFi drivers:
- RealTek (rtw88):
- IBSS mode for SDIO devices
- RealTek (rtw89):
- BT coexistence for MLO/WiFi7
- concurrent station + P2P support
- support for USB devices RTL8851BU/RTL8852BU
- Intel (iwlwifi):
- use embedded PNVM in (to be released) FW images to fix
compatibility issues
- many cleanups (unused FW APIs, PCIe code, WoWLAN)
- some FIPS interoperability
- MediaTek (mt76):
- firmware recovery improvements
- more MLO work
- Qualcomm/Atheros (ath12k):
- fix scan on multi-radio devices
- more EHT/Wi-Fi 7 features
- encapsulation/decapsulation offload
- Broadcom (brcm80211):
- support SDIO 43751 device
- Bluetooth:
- hci_event: add support for handling LE BIG Sync Lost event
- ISO: add socket option to report packet seqnum via CMSG
- ISO: support SCM_TIMESTAMPING for ISO TS
- Bluetooth drivers:
- intel_pcie: support Function Level Reset
- nxpuart: add support for 4M baudrate
- nxpuart: implement powerup sequence, reset, FW dump, and FW loading"
* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
dpll: zl3073x: Fix build failure
selftests: bpf: fix legacy netfilter options
ipv6: annotate data-races around rt->fib6_nsiblings
ipv6: fix possible infinite loop in fib6_info_uses_dev()
ipv6: prevent infinite loop in rt6_nlmsg_size()
ipv6: add a retry logic in net6_rt_notify()
vrf: Drop existing dst reference in vrf_ip6_input_dst
net/sched: taprio: align entry index attr validation with mqprio
net: fsl_pq_mdio: use dev_err_probe
selftests: rtnetlink.sh: remove esp4_offload after test
vsock: remove unnecessary null check in vsock_getname()
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
dt-bindings: ieee802154: Convert at86rf230.txt yaml format
net: dsa: microchip: Disable PTP function of KSZ8463
net: dsa: microchip: Setup fiber ports for KSZ8463
net: dsa: microchip: Write switch MAC address differently for KSZ8463
net: dsa: microchip: Use different registers for KSZ8463
net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
...
|
||
|
Linus Torvalds
|
13150742b0 |
Crypto library updates for 6.17
This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants. These APIs will allow further simplifications across the
kernel as users start using them instead of the old-school crypto API.
(I've already written a lot of such conversion patches, removing over
1000 more lines of code. But most of those will target 6.18 or later.)
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ93BQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK8HCAQD3O9P0qd6wscne5XuRwaybzKHQ2AqU
OlhlDZWQQEvYAgD/aa6KP/DS+8RKGj0TBn6bACAJyXyDygFXq5a5s9pGzAs=
=UmMM
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
|
||
|
Linus Torvalds
|
a578dd095d |
CRC updates for 6.17
Updates for the kernel's CRC (cyclic redundancy check) code:
- Reorganize the architecture-optimized CRC code. It now lives in
lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/, and it is no
longer artificially split into separate generic and arch modules.
This allows better inlining and dead code elimination. The generic
CRC code is also no longer exported, simplifying the API. (This
mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request.)
- Improve crc32c() performance on newer x86_64 CPUs on long messages
by enabling the VPCLMULQDQ optimized code.
- Simplify the crypto_shash wrappers for crc32_le() and crc32c().
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code.
- Remove unused and obsolete drivers for hardware CRC engines.
- Remove CRC-32 combination functions that are no longer used.
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c().
- Convert the crc32() macro to an inline function.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaIZ8rRQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK3yOAP9OuoCirD42ZHNSgQeGTzhhZ2jCHiPN
BPvHChwtE2MSRwEA0ddNX36aOiEKmpjog3TMllOIBz7wBrwZV7KgoX75+AU=
=uAY8
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Reorganize the architecture-optimized CRC code
It now lives in lib/crc/$(SRCARCH)/ rather than arch/$(SRCARCH)/lib/,
and it is no longer artificially split into separate generic and arch
modules. This allows better inlining and dead code elimination
The generic CRC code is also no longer exported, simplifying the API.
(This mirrors the similar changes to SHA-1 and SHA-2 in lib/crypto/,
which can be found in the "Crypto library updates" pull request)
- Improve crc32c() performance on newer x86_64 CPUs on long messages by
enabling the VPCLMULQDQ optimized code
- Simplify the crypto_shash wrappers for crc32_le() and crc32c()
Register just one shash algorithm for each that uses the (fully
optimized) library functions, instead of unnecessarily providing
direct access to the generic CRC code
- Remove unused and obsolete drivers for hardware CRC engines
- Remove CRC-32 combination functions that are no longer used
- Add kerneldoc for crc32_le(), crc32_be(), and crc32c()
- Convert the crc32() macro to an inline function
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (26 commits)
lib/crc: x86/crc32c: Enable VPCLMULQDQ optimization where beneficial
lib/crc: x86: Reorganize crc-pclmul static_call initialization
lib/crc: crc64: Add include/linux/crc64.h to kernel-api.rst
lib/crc: crc32: Change crc32() from macro to inline function and remove cast
nvmem: layouts: Switch from crc32() to crc32_le()
lib/crc: crc32: Document crc32_le(), crc32_be(), and crc32c()
lib/crc: Explicitly include <linux/export.h>
lib/crc: Remove ARCH_HAS_* kconfig symbols
lib/crc: x86: Migrate optimized CRC code into lib/crc/
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
lib/crc: s390: Migrate optimized CRC code into lib/crc/
lib/crc: riscv: Migrate optimized CRC code into lib/crc/
lib/crc: powerpc: Migrate optimized CRC code into lib/crc/
lib/crc: mips: Migrate optimized CRC code into lib/crc/
lib/crc: loongarch: Migrate optimized CRC code into lib/crc/
lib/crc: arm64: Migrate optimized CRC code into lib/crc/
lib/crc: arm: Migrate optimized CRC code into lib/crc/
lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/
lib/crc: Move files into lib/crc/
lib/crc32: Remove unused combination support
...
|
||
|
Linus Torvalds
|
8e736a2eea |
hardening updates for v6.17-rc1
- Introduce and start using TRAILING_OVERLAP() helper for fixing embedded flex array instances (Gustavo A. R. Silva) - mux: Convert mux_control_ops to a flex array member in mux_chip (Thorsten Blum) - string: Group str_has_prefix() and strstarts() (Andy Shevchenko) - Remove KCOV instrumentation from __init and __head (Ritesh Harjani, Kees Cook) - Refactor and rename stackleak feature to support Clang - Add KUnit test for seq_buf API - Fix KUnit fortify test under LTO -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIfUkgAKCRA2KwveOeQk uypLAP92r6f47sWcOw/5B9aVffX6Bypsb7dqBJQpCNxI5U1xcAEAiCrZ98UJyOeQ JQgnXd4N67K4EsS2JDc+FutRn3Yi+A8= =+5Bq -----END PGP SIGNATURE----- Merge tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: - Introduce and start using TRAILING_OVERLAP() helper for fixing embedded flex array instances (Gustavo A. R. Silva) - mux: Convert mux_control_ops to a flex array member in mux_chip (Thorsten Blum) - string: Group str_has_prefix() and strstarts() (Andy Shevchenko) - Remove KCOV instrumentation from __init and __head (Ritesh Harjani, Kees Cook) - Refactor and rename stackleak feature to support Clang - Add KUnit test for seq_buf API - Fix KUnit fortify test under LTO * tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits) sched/task_stack: Add missing const qualifier to end_of_stack() kstack_erase: Support Clang stack depth tracking kstack_erase: Add -mgeneral-regs-only to silence Clang warnings init.h: Disable sanitizer coverage for __init and __head kstack_erase: Disable kstack_erase for all of arm compressed boot code x86: Handle KCOV __init vs inline mismatches arm64: Handle KCOV __init vs inline mismatches s390: Handle KCOV __init vs inline mismatches arm: Handle KCOV __init vs inline mismatches mips: Handle KCOV __init vs inline mismatch powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON configs/hardening: Enable CONFIG_KSTACK_ERASE stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth stackleak: Rename STACKLEAK to KSTACK_ERASE seq_buf: Introduce KUnit tests string: Group str_has_prefix() and strstarts() kunit/fortify: Add back "volatile" for sizeof() constants acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings ... |
||
|
Linus Torvalds
|
d900c4ce63 |
execve updates for v6.17
- Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaIVKiAAKCRA2KwveOeQk u4zBAP4zUNj2+XyixVPXCzv+Hkle6zWs7yrzdA2yLxe8Qtwj5AD+N2I6MUGcCFGW W+uWxlWTtGLDqh1CplIUqTlxMi39Og4= =vYnE -----END PGP SIGNATURE----- Merge tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve updates from Kees Cook: - Introduce regular REGSET note macros arch-wide (Dave Martin) - Remove arbitrary 4K limitation of program header size (Yin Fengwei) - Reorder function qualifiers for copy_clone_args_from_user() (Dishank Jogi) * tag 'execve-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (25 commits) fork: reorder function qualifiers for copy_clone_args_from_user binfmt_elf: remove the 4k limitation of program header size binfmt_elf: Warn on missing or suspicious regset note names xtensa: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names um: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names x86/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names sh: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names s390/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names riscv: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names powerpc/ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names parisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names openrisc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names nios2: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names MIPS: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names m68k: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names LoongArch: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names hexagon: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names csky: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names arm64: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names ... |
||
|
Linus Torvalds
|
57fcb7d930 |
vfs-6.17-rc1.fileattr
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaINCpgAKCRCRxhvAZXjc oqfFAQDcy3rROUF3W34KcSi7rDmaKVSX53d1tUoqH+1zDRpSlwEAriKDNC1ybudp YAnxVzkRHjHs1296WIuwKq5lfhJ60Q4= =geAl -----END PGP SIGNATURE----- Merge tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull fileattr updates from Christian Brauner: "This introduces the new file_getattr() and file_setattr() system calls after lengthy discussions. Both system calls serve as successors and extensible companions to the FS_IOC_FSGETXATTR and FS_IOC_FSSETXATTR system calls which have started to show their age in addition to being named in a way that makes it easy to conflate them with extended attribute related operations. These syscalls allow userspace to set filesystem inode attributes on special files. One of the usage examples is the XFS quota projects. XFS has project quotas which could be attached to a directory. All new inodes in these directories inherit project ID set on parent directory. The project is created from userspace by opening and calling FS_IOC_FSSETXATTR on each inode. This is not possible for special files such as FIFO, SOCK, BLK etc. Therefore, some inodes are left with empty project ID. Those inodes then are not shown in the quota accounting but still exist in the directory. This is not critical but in the case when special files are created in the directory with already existing project quota, these new inodes inherit extended attributes. This creates a mix of special files with and without attributes. Moreover, special files with attributes don't have a possibility to become clear or change the attributes. This, in turn, prevents userspace from re-creating quota project on these existing files. In addition, these new system calls allow the implementation of additional attributes that we couldn't or didn't want to fit into the legacy ioctls anymore" * tag 'vfs-6.17-rc1.fileattr' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: fs: tighten a sanity check in file_attr_to_fileattr() tree-wide: s/struct fileattr/struct file_kattr/g fs: introduce file_getattr and file_setattr syscalls fs: prepare for extending file_get/setattr() fs: make vfs_fileattr_[get|set] return -EOPNOTSUPP selinux: implement inode_file_[g|s]etattr hooks lsm: introduce new hooks for setting/getting inode fsxattr fs: split fileattr related helpers into separate file |
||
|
Anshuman Khandual
|
6470fb2bb1 |
fs/Kconfig: enable HUGETLBFS only if ARCH_SUPPORTS_HUGETLBFS
Enable HUGETLBFS only when platform subscrbes via ARCH_SUPPORTS_HUGETLBFS. Hence select ARCH_SUPPORTS_HUGETLBFS on existing x86 and sparc for their continuing HUGETLBFS support. While here also just drop existing 'BROKEN' dependency. Link: https://lkml.kernel.org/r/20250711102934.2399533-1-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Christian Brauner <brauner@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Anthony Yznaga
|
d0813985a2 |
sparc64: remove hugetlb_free_pgd_range()
Patch series "drop hugetlb_free_pgd_range()". For all architectures that support hugetlb except for sparc, hugetlb_free_pgd_range() just calls free_pgd_range(). It turns out the sparc implementation is essentially identical to free_pgd_range() and can be removed. Remove it and update free_pgtables() to treat hugetlb VMAs the same as others. This patch (of 3): The sparc implementation of hugetlb_free_pgd_range() is identical to free_pgd_range() with the exception of checking for and skipping possible leaf entries at the PUD and PMD levels. These checks are unnecessary because any huge pages have been freed and their PTEs cleared by the time page tables needed to map them are freed. While some huge page sizes do populate the page table with multiple PTEs, they are correctly cleared by huge_ptep_get_and_clear(). To verify this, libhugetlbfs tests were run for 64K, 8M, and 256M page sizes with an instrumented kernel on a qemu guest modified to support the 256M page size. The same tests were used to verify no regressions after applying this patch and were also run on x86 for both 2M and 1G page sizes. Link: https://lkml.kernel.org/r/20250716012611.10369-1-anthony.yznaga@oracle.com Link: https://lkml.kernel.org/r/20250716012611.10369-2-anthony.yznaga@oracle.com Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Oscar Salvador <osalvador@suse.de> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: David Hildenbrand <david@redhat.com> Cc: David S. Miller <davem@davemloft.net> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Oscar Salvador <osalvador@suse.de> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Steven Rostedt
|
4d6d0a6263 |
tracing: Remove redundant config HAVE_FTRACE_MCOUNT_RECORD
Ftrace is tightly coupled with architecture specific code because it requires the use of trampolines written in assembly. This means that when a new feature or optimization is made, it must be done for all architectures. To simplify the approach, CONFIG_HAVE_FTRACE_* configs are added to denote which architecture has the new enhancement so that other architectures can still function until they too have been updated. The CONFIG_HAVE_FTRACE_MCOUNT was added to help simplify the DYNAMIC_FTRACE work, but now every architecture that implements DYNAMIC_FTRACE also has HAVE_FTRACE_MCOUNT set too, making it redundant with the HAVE_DYNAMIC_FTRACE. Remove the HAVE_FTRACE_MCOUNT config and use DYNAMIC_FTRACE directly where applicable. Link: https://lore.kernel.org/all/20250703154916.48e3ada7@gandalf.local.home/ Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lore.kernel.org/20250704104838.27a18690@gandalf.local.home Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Kees Cook
|
76261fc7d1 |
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
In preparation for Clang stack depth tracking for KSTACK_ERASE, split the stackleak-specific cflags out of GCC_PLUGINS_CFLAGS into KSTACK_ERASE_CFLAGS. Link: https://lore.kernel.org/r/20250717232519.2984886-3-kees@kernel.org Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Dave Martin
|
c9d4cb25e9 |
sparc: ptrace: Use USER_REGSET_NOTE_TYPE() to specify regset note names
Instead of having the core code guess the note name for each regset, use USER_REGSET_NOTE_TYPE() to pick the correct name from elf.h. Signed-off-by: Dave Martin <Dave.Martin@arm.com> Cc: David S. Miller <davem@davemloft.net> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <kees@kernel.org> Cc: Akihiko Odaki <akihiko.odaki@daynix.com> Cc: sparclinux@vger.kernel.org Reviewed-by: Akihiko Odaki <odaki@rsg.ci.i.u-tokyo.ac.jp> Link: https://lore.kernel.org/r/20250701135616.29630-20-Dave.Martin@arm.com Signed-off-by: Kees Cook <kees@kernel.org> |
||
|
Eric Biggers
|
c751059985 |
lib/crypto: sparc/sha1: Migrate optimized code into library
Instead of exposing the sparc-optimized SHA-1 code via sparc-specific crypto_shash algorithms, instead just implement the sha1_blocks() library function. This is much simpler, it makes the SHA-1 library functions be sparc-optimized, and it fixes the longstanding issue where the sparc-optimized SHA-1 code was disabled by default. SHA-1 still remains available through crypto_shash, but individual architectures no longer need to handle it. Note: to see the diff from arch/sparc/crypto/sha1_glue.c to lib/crypto/sparc/sha1.h, view this commit with 'git show -M10'. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250712232329.818226-13-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Lorenzo Stoakes
|
d75fa3c947 |
mm: update architecture and driver code to use vm_flags_t
In future we intend to change the vm_flags_t type, so it isn't correct for architecture and driver code to assume it is unsigned long. Correct this assumption across the board. Overall, this patch does not introduce any functional change. Link: https://lkml.kernel.org/r/b6eb1894abc5555ece80bb08af5c022ef780c8bc.1750274467.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Kees Cook <kees@kernel.org> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
78ddaa358e |
mm: change vm_get_page_prot() to accept vm_flags_t argument
Patch series "use vm_flags_t consistently". The VMA flags field vma->vm_flags is of type vm_flags_t. Right now this is exactly equivalent to unsigned long, but it should not be assumed to be. Much code that references vma->vm_flags already correctly uses vm_flags_t, but a fairly large chunk of code simply uses unsigned long and assumes that the two are equivalent. This series corrects that and has us use vm_flags_t consistently. This series is motivated by the desire to, in a future series, adjust vm_flags_t to be a u64 regardless of whether the kernel is 32-bit or 64-bit in order to deal with the VMA flag exhaustion issue and avoid all the various problems that arise from it (being unable to use certain features in 32-bit, being unable to add new flags except for 64-bit, etc.) This is therefore a critical first step towards that goal. At any rate, using the correct type is of value regardless. We additionally take the opportunity to refer to VMA flags as vm_flags where possible to make clear what we're referring to. Overall, this series does not introduce any functional change. This patch (of 3): We abstract the type of the VMA flags to vm_flags_t, however in may places it is simply assumed this is unsigned long, which is simply incorrect. At the moment this is simply an incongruity, however in future we plan to change this type and therefore this change is a critical requirement for doing so. Overall, this patch does not introduce any functional change. [lorenzo.stoakes@oracle.com: add missing vm_get_page_prot() instance, remove include] Link: https://lkml.kernel.org/r/552f88e1-2df8-4e95-92b8-812f7c8db829@lucifer.local Link: https://lkml.kernel.org/r/cover.1750274467.git.lorenzo.stoakes@oracle.com Link: https://lkml.kernel.org/r/a12769720a2743f235643b158c4f4f0a9911daf0.1750274467.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Oscar Salvador <osalvador@suse.de> Reviewed-by: Pedro Falcato <pfalcato@suse.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Acked-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Kees Cook <kees@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kuniyuki Iwashima
|
df30285b36 |
af_unix: Introduce SO_INQ.
We have an application that uses almost the same code for TCP and AF_UNIX (SOCK_STREAM). TCP can use TCP_INQ, but AF_UNIX doesn't have it and requires an extra syscall, ioctl(SIOCINQ) or getsockopt(SO_MEMINFO) as an alternative. Let's introduce the generic version of TCP_INQ. If SO_INQ is enabled, recvmsg() will put a cmsg of SCM_INQ that contains the exact value of ioctl(SIOCINQ). The cmsg is also included when msg->msg_get_inq is non-zero to make sockets io_uring-friendly. Note that SOCK_CUSTOM_SOCKOPT is flagged only for SOCK_STREAM to override setsockopt() for SOL_SOCKET. By having the flag in struct unix_sock, instead of struct sock, we can later add SO_INQ support for TCP and reuse tcp_sk(sk)->recvmsg_inq. Note also that supporting custom getsockopt() for SOL_SOCKET will need preparation for other SOCK_CUSTOM_SOCKOPT users (UDP, vsock, MPTCP). Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20250702223606.1054680-7-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Andrey Albershteyn
|
be7efb2d20
|
fs: introduce file_getattr and file_setattr syscalls
Introduce file_getattr() and file_setattr() syscalls to manipulate inode extended attributes. The syscalls takes pair of file descriptor and pathname. Then it operates on inode opened accroding to openat() semantics. The struct file_attr is passed to obtain/change extended attributes. This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference that file don't need to be open as we can reference it with a path instead of fd. By having this we can manipulated inode extended attributes not only on regular files but also on special ones. This is not possible with FS_IOC_FSSETXATTR ioctl as with special files we can not call ioctl() directly on the filesystem inode using fd. This patch adds two new syscalls which allows userspace to get/set extended inode attributes on special files by using parent directory and a path - *at() like syscall. CC: linux-api@vger.kernel.org CC: linux-fsdevel@vger.kernel.org CC: linux-xfs@vger.kernel.org Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org> Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Eric Biggers
|
9b2d720e8a |
lib/crc: sparc: Migrate optimized CRC code into lib/crc/
Move the sparc-optimized CRC code from arch/sparc/lib/crc* into its new location in lib/crc/sparc/, and wire it up in the new way. This new way of organizing the CRC code eliminates the need to artificially split the code for each CRC variant into separate arch and generic modules, enabling better inlining and dead code elimination. For more details, see "lib/crc: Prepare for arch-optimized code in subdirs of lib/crc/". Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: "Jason A. Donenfeld" <Jason@zx2c4.com> Link: https://lore.kernel.org/r/20250607200454.73587-11-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Eric Biggers
|
a32e93e100 |
lib/crypto: sparc: Move arch/sparc/lib/crypto/ into lib/crypto/
Move the contents of arch/sparc/lib/crypto/ into lib/crypto/sparc/. The new code organization makes a lot more sense for how this code actually works and is developed. In particular, it makes it possible to build each algorithm as a single module, with better inlining and dead code elimination. For a more detailed explanation, see the patchset which did this for the CRC library code: https://lore.kernel.org/r/20250607200454.73587-1-ebiggers@kernel.org/. Also see the patchset which did this for SHA-512: https://lore.kernel.org/linux-crypto/20250616014019.415791-1-ebiggers@kernel.org/ This is just a preparatory commit, which does the move to get the files into their new location but keeps them building the same way as before. Later commits will make the actual improvements to the way the arch-optimized code is integrated for each algorithm. Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sohil Mehta <sohil.mehta@intel.com> Link: https://lore.kernel.org/r/20250619191908.134235-8-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Eric Biggers
|
02b35bab7e |
lib/crypto: sparc/sha512: Migrate optimized SHA-512 code to library
Instead of exposing the sparc-optimized SHA-512 code via sparc-specific crypto_shash algorithms, instead just implement the sha512_blocks() library function. This is much simpler, it makes the SHA-512 (and SHA-384) library functions be sparc-optimized, and it fixes the longstanding issue where the sparc-optimized SHA-512 code was disabled by default. SHA-512 still remains available through crypto_shash, but individual architectures no longer need to handle it. To match sha512_blocks(), change the type of the nblocks parameter of the assembly function from int to size_t. The assembly function actually already treated it as size_t. Note: to see the diff from arch/sparc/crypto/sha512_glue.c to lib/crypto/sparc/sha512.h, view this commit with 'git show -M10'. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250630160320.2888-14-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Eric Biggers
|
e0fca17755 |
crypto: sha512 - Rename conflicting symbols
Rename existing functions and structs in architecture-optimized SHA-512 code that had names conflicting with the upcoming library interface which will be added to <crypto/sha2.h>: sha384_init, sha512_init, sha512_update, sha384, and sha512. Note: all affected code will be superseded by later commits that migrate the arch-optimized SHA-512 code into the library. This commit simply keeps the kernel building for the initial introduction of the library. Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250630160320.2888-2-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@kernel.org> |
||
|
Magnus Lindholm
|
403d1338a4 |
mm: pgtable: fix pte_swp_exclusive
Make pte_swp_exclusive return bool instead of int. This will better reflect how pte_swp_exclusive is actually used in the code. This fixes swap/swapoff problems on Alpha due pte_swp_exclusive not returning correct values when _PAGE_SWP_EXCLUSIVE bit resides in upper 32-bits of PTE (like on alpha). Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Magnus Lindholm <linmag7@gmail.com> Cc: Sam James <sam@gentoo.org> Link: https://lore.kernel.org/lkml/20250218175735.19882-2-linmag7@gmail.com/ Link: https://lore.kernel.org/lkml/20250602041118.GA2675383@ZenIV/ [ Applied as the 'sed' script Al suggested - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Ingo Molnar
|
41cb08555c |
treewide, timers: Rename from_timer() to timer_container_of()
Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com |
||
|
Linus Torvalds
|
8630c59e99 |
Kbuild updates for v6.16
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which exports a
symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
-----BEGIN PGP SIGNATURE-----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=Dy49
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add support for the EXPORT_SYMBOL_GPL_FOR_MODULES() macro, which
exports a symbol only to specified modules
- Improve ABI handling in gendwarfksyms
- Forcibly link lib-y objects to vmlinux even if CONFIG_MODULES=n
- Add checkers for redundant or missing <linux/export.h> inclusion
- Deprecate the extra-y syntax
- Fix a genksyms bug when including enum constants from *.symref files
* tag 'kbuild-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
genksyms: Fix enum consts from a reference affecting new values
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
kbuild: set y instead of 1 to KBUILD_{BUILTIN,MODULES}
efi/libstub: use 'targets' instead of extra-y in Makefile
module: make __mod_device_table__* symbols static
scripts/misc-check: check unnecessary #include <linux/export.h> when W=1
scripts/misc-check: check missing #include <linux/export.h> when W=1
scripts/misc-check: add double-quotes to satisfy shellcheck
kbuild: move W=1 check for scripts/misc-check to top-level Makefile
scripts/tags.sh: allow to use alternative ctags implementation
kconfig: introduce menu type enum
docs: symbol-namespaces: fix reST warning with literal block
kbuild: link lib-y objects to vmlinux forcibly even when CONFIG_MODULES=n
tinyconfig: enable CONFIG_LD_DEAD_CODE_DATA_ELIMINATION
docs/core-api/symbol-namespaces: drop table of contents and section numbering
modpost: check forbidden MODULE_IMPORT_NS("module:") at compile time
kbuild: move kbuild syntax processing to scripts/Makefile.build
Makefile: remove dependency on archscripts for header installation
Documentation/kbuild: Add new gendwarfksyms kABI rules
Documentation/kbuild: Drop section numbers
...
|
||
|
Masahiro Yamada
|
e21efe833e |
arch: use always-$(KBUILD_BUILTIN) for vmlinux.lds
The extra-y syntax is deprecated. Instead, use always-$(KBUILD_BUILTIN), which behaves equivalently. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Reviewed-by: Nicolas Schier <n.schier@avm.de> |
||
|
Linus Torvalds
|
00c010e130 |
- The 11 patch series "Add folio_mk_pte()" from Matthew Wilcox
simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - The 3 patch series "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - The 2 patch series "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - The 8 patch series "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - The 2 patch series "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - The 3 patch series "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - The 12 patch series "Always call constructor for kernel page tables" from Kevin Brodsky "ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables". This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - The 9 patch series "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - The 3 patch series "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - The 6 patch series "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - The 3 patch series ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - The 2 patch series "vmscan: enforce mems_effective during demotion" from Gregory Price "changes reclaim to respect cpuset.mems_effective during demotion when possible". because "presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated." "This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently." - The 2 patch series ""Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - The 4 patch series "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - The 7 patch series "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - The 2 patch series "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - The 4 patch series "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - The 6 patch series "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - The 8 patch series "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - The 4 patch series "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - The 6 patch series "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is "yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents." - The 7 patch series "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - The 4 patch series "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x Qqb/UGMEpilyre1PayQqOnct3aSL9Ao= =tYYm -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
|
Linus Torvalds
|
1b98f357da |
Networking changes for 6.16.
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
|
||
|
Linus Torvalds
|
f1975e4765 |
Summary
* Move kern_table members out of kernel/sysctl.c Moved a subset (tracing, panic, signal, stack_tracer and sparc) out of the kern_table array. The goal is for kern_table to only have sysctl elements. All this increases modularity by placing the ctl_tables closer to where they are used while reducing the chances of merge conflicts in kernel/sysctl.c. * Fixed sysctl unit test panic by relocating it to selftests * Testing These have been in linux-next from rc2, so they have had more than a month worth of testing. -----BEGIN PGP SIGNATURE----- iQGzBAABCgAdFiEErkcJVyXmMSXOyyeQupfNUreWQU8FAmgwLsAACgkQupfNUreW QU9ghwv/VKZW+IXEvSjc8OiwntWkL7e5ddHY6O2Vf44MzhBefLTXmfx2HfkEA0Xw RaOQ28Hf/zQL83RqHHnXqI7JdGWQJUm8bCPwk4H3DCaF8qOfPVvblVYmfNL2auSY oyRRpRzZuY5EtKcrNjiHFHL2WIC8KvPVwS748oHY1eZY7kn1fcs8DDnNO4iuWop+ uJeDxu87wkRCFXF3DIM+MAHRvxSa8GHtZvb9EjAl/EHMbAyVSz3uTb7FdQDdnE09 s7P30EC03RHtgi3sd2Ku04dJsHLz7VErvpToxSH2KFlcdpJuWuCSCTT8XaD8kII8 kYYCxNpmPOf4LzEy/J2vVZB0PSHrHvuQCH7iGy+8wOPk9GHTOMkKMMXVmeGnAsef AiosPYroxXp/nBFcuNs6/1LKpsdpFr2F6u6oMgbzLaW1Xe/oc+6oynuOgeVj9LuM FrSxSwaVvpdwHYHujYPQAAWIgKRzITiEXnCgtSyohFquKb+7E8ZspwjOqYH2xWMQ WwABNRqY =45X2 -----END PGP SIGNATURE----- Merge tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl Pull sysctl updates from Joel Granados: - Move kern_table members out of kernel/sysctl.c Moved a subset (tracing, panic, signal, stack_tracer and sparc) out of the kern_table array. The goal is for kern_table to only have sysctl elements. All this increases modularity by placing the ctl_tables closer to where they are used while reducing the chances of merge conflicts in kernel/sysctl.c. - Fixed sysctl unit test panic by relocating it to selftests * tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: Close test ctl_headers with a for loop sysctl: call sysctl tests with a for loop sysctl: Add 0012 to test the u8 range check sysctl: move u8 register test to lib/test_sysctl.c sparc: mv sparc sysctls into their own file under arch/sparc/kernel stack_tracer: move sysctl registration to kernel/trace/trace_stack.c tracing: Move trace sysctls into trace.c signal: Move signal ctl tables into signal.c panic: Move panic ctl tables into panic.c |
||
|
Linus Torvalds
|
ddddf9d64f |
Performance events updates for v6.16:
Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to
the Intel driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the
x86 and PowerPC platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker,
Ian Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang,
Sandipan Das, Thorsten Blum)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tPRs
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
|
||
|
Linus Torvalds
|
14418ddcc2 |
This update includes the following changes:
API: - Fix memcpy_sglist to handle partially overlapping SG lists. - Use memcpy_sglist to replace null skcipher. - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK. - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS. - Hide CRYPTO_MANAGER. - Add delayed freeing of driver crypto_alg structures. Compression: - Allocate large buffers on first use instead of initialisation in scomp. - Drop destination linearisation buffer in scomp. - Move scomp stream allocation into acomp. - Add acomp scatter-gather walker. - Remove request chaining. - Add optional async request allocation. Hashing: - Remove request chaining. - Add optional async request allocation. - Move partial block handling into API. - Add ahash support to hmac. - Fix shash documentation to disallow usage in hard IRQs. Algorithms: - Remove unnecessary SIMD fallback code on x86 and arm/arm64. - Drop avx10_256 xts(aes)/ctr(aes) on x86. - Improve avx-512 optimisations for xts(aes). - Move chacha arch implementations into lib/crypto. - Move poly1305 into lib/crypto and drop unused Crypto API algorithm. - Disable powerpc/poly1305 as it has no SIMD fallback. - Move sha256 arch implementations into lib/crypto. - Convert deflate to acomp. - Set block size correctly in cbcmac. Drivers: - Do not use sg_dma_len before mapping in sun8i-ss. - Fix warm-reboot failure by making shutdown do more work in qat. - Add locking in zynqmp-sha. - Remove cavium/zip. - Add support for PCI device 0x17D8 to ccp. - Add qat_6xxx support in qat. - Add support for RK3576 in rockchip-rng. - Add support for i.MX8QM in caam. Others: - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up. - Add new SEV/SNP platform shutdown API in ccp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmgz47AACgkQxycdCkmx i6fvKRAAr4Xa903L0r1Q1P1alQqoFFCqimUWeH72m68LiWynHWi0lUo0z/+tKweg mnPStz7/Ha9HRHJjdNCMPnlJqXQDkuH3bIOuBJCwduDuhHo9VGOd46XGzmGMv3gb HKuZhI0lk7pznK3CSyD/2nHmbDCHD+7feTZSBMoN9mm875+aSoM6fdxgak8uPFcq KbB1L+hObTn2kAPSqRrNOR8/xG2N7hdH8eax7Li+LAtqYNVT5HvWVECsB/CKRPfB sgAv3UTzcIFapSSHUHaONppSeoqPAIAeV7SdQhJvlT+EUUR/h/B6+D9OUQQqbphQ LBalgTnqMKl0ymDEQFQ6QyYCat9ZfNmDft2WcXEsxc8PxImkgJI1W3B8O51sOjbG 78D8JqVQ96dleo4FsBhM2wfG0b41JM6zU4raC4vS7a3qsUS+Q1MpehvcS1iORicy SpGdE8e7DLlxKhzWyW1xJnbrtMZDC7Sa2hUnxrvP0/xOvRhChKscRVtWcf0a5q7X 8JmuvwVSOJuSbQ3MeFbQvpo5lR9+0WsNjM6e9miiH6Y7vZUKmWcq2yDp377qVzeh 7NK6+OwGIQZZExrmtPw2BXwssT9Eg+ks6Y7g2Ne7yzvrjVNfEPY7Cws/5w7p8mRS qhrcpbJNFlWgD7YYkmGZFTQ8DCN25ipP8lklO/hbcfchqLE/o1o= =O8L5 -----END PGP SIGNATURE----- Merge tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Fix memcpy_sglist to handle partially overlapping SG lists - Use memcpy_sglist to replace null skcipher - Rename CRYPTO_TESTS to CRYPTO_BENCHMARK - Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS - Hide CRYPTO_MANAGER - Add delayed freeing of driver crypto_alg structures Compression: - Allocate large buffers on first use instead of initialisation in scomp - Drop destination linearisation buffer in scomp - Move scomp stream allocation into acomp - Add acomp scatter-gather walker - Remove request chaining - Add optional async request allocation Hashing: - Remove request chaining - Add optional async request allocation - Move partial block handling into API - Add ahash support to hmac - Fix shash documentation to disallow usage in hard IRQs Algorithms: - Remove unnecessary SIMD fallback code on x86 and arm/arm64 - Drop avx10_256 xts(aes)/ctr(aes) on x86 - Improve avx-512 optimisations for xts(aes) - Move chacha arch implementations into lib/crypto - Move poly1305 into lib/crypto and drop unused Crypto API algorithm - Disable powerpc/poly1305 as it has no SIMD fallback - Move sha256 arch implementations into lib/crypto - Convert deflate to acomp - Set block size correctly in cbcmac Drivers: - Do not use sg_dma_len before mapping in sun8i-ss - Fix warm-reboot failure by making shutdown do more work in qat - Add locking in zynqmp-sha - Remove cavium/zip - Add support for PCI device 0x17D8 to ccp - Add qat_6xxx support in qat - Add support for RK3576 in rockchip-rng - Add support for i.MX8QM in caam Others: - Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up - Add new SEV/SNP platform shutdown API in ccp" * tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits) x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining crypto: qat - add missing header inclusion crypto: api - Redo lookup on EEXIST Revert "crypto: testmgr - Add hash export format testing" crypto: marvell/cesa - Do not chain submitted requests crypto: powerpc/poly1305 - add depends on BROKEN for now Revert "crypto: powerpc/poly1305 - Add SIMD fallback" crypto: ccp - Add missing tee info reg for teev2 crypto: ccp - Add missing bootloader info reg for pspv5 crypto: sun8i-ce - move fallback ahash_request to the end of the struct crypto: octeontx2 - Use dynamic allocated memory region for lmtst crypto: octeontx2 - Initialize cptlfs device info once crypto: xts - Only add ecb if it is not already there crypto: lrw - Only add ecb if it is not already there crypto: testmgr - Add hash export format testing crypto: testmgr - Use ahash for generic tfm crypto: hmac - Add ahash support crypto: testmgr - Ignore EEXIST on shash allocation crypto: algapi - Add driver template support to crypto_inst_setname crypto: shash - Set reqsize in shash_alg ... |
||
|
Kuniyuki Iwashima
|
77cbe1a6d8 |
af_unix: Introduce SO_PASSRIGHTS.
As long as recvmsg() or recvmmsg() is used with cmsg, it is not possible to avoid receiving file descriptors via SCM_RIGHTS. This behaviour has occasionally been flagged as problematic, as it can be (ab)used to trigger DoS during close(), for example, by passing a FUSE-controlled fd or a hung NFS fd. For instance, as noted on the uAPI Group page [0], an untrusted peer could send a file descriptor pointing to a hung NFS mount and then close it. Once the receiver calls recvmsg() with msg_control, the descriptor is automatically installed, and then the responsibility for the final close() now falls on the receiver, which may result in blocking the process for a long time. Regarding this, systemd calls cmsg_close_all() [1] after each recvmsg() to close() unwanted file descriptors sent via SCM_RIGHTS. However, this cannot work around the issue at all, because the final fput() may still occur on the receiver's side once sendmsg() with SCM_RIGHTS succeeds. Also, even filtering by LSM at recvmsg() does not work for the same reason. Thus, we need a better way to refuse SCM_RIGHTS at sendmsg(). Let's introduce SO_PASSRIGHTS to disable SCM_RIGHTS. Note that this option is enabled by default for backward compatibility. Link: https://uapi-group.org/kernel-features/#disabling-reception-of-scm_rights-for-af_unix-sockets #[0] Link: https://github.com/systemd/systemd/blob/v257.5/src/basic/fd-util.c#L612-L628 #[1] Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Kan Liang
|
e4806c17bf |
sparc/perf: Remove driver-specific throttle support
The throttle support has been added in the generic code. Remove the driver-specific throttle support. Besides the throttle, perf_event_overflow may return true because of event_limit. It already does an inatomic event disable. The pmu->stop is not required either. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20250520181644.2673067-15-kan.liang@linux.intel.com |
||
|
Eric Biggers
|
3357b6c945 |
crypto: tcrypt - rename CRYPTO_TEST to CRYPTO_BENCHMARK
tcrypt is actually a benchmarking module and not the actual tests. This regularly causes confusion. Update the kconfig option name and help text accordingly. Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Kevin Brodsky
|
10a2e444e4 |
sparc64: mm: call ctor/dtor for kernel PTEs
The generic implementation of pte_{alloc_one,free}_kernel now calls the
[cd]tor, without initialising the ptlock needlessly as
pagetable_pte_ctor() skips it for init_mm.
Align sparc64 with the generic implementation by ensuring
pagetable_pte_[cd]tor() are called for kernel PTEs. As a result the
kernel and user alloc/free functions have the same implementation, and
since pgtable_t is defined as pte_t *, we can have both call a common
helper.
Link: https://lkml.kernel.org/r/20250408095222.860601-7-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Waleij <linus.walleij@linaro.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: <x86@kernel.org>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Kevin Brodsky
|
d82d3bf411 |
mm: pass mm down to pagetable_{pte,pmd}_ctor
Patch series "Always call constructor for kernel page tables", v2.
There has been much confusion around exactly when page table
constructors/destructors (pagetable_*_[cd]tor) are supposed to be called.
They were initially introduced for user PTEs only (to support split page
table locks), then at the PMD level for the same purpose. Accounting was
added later on, starting at the PTE level and then moving to higher levels
(PMD, PUD). Finally, with my earlier series "Account page tables at all
levels" [1], the ctor/dtor is run for all levels, all the way to PGD.
I thought this was the end of the story, and it hopefully is for user
pgtables, but I was wrong for what concerns kernel pgtables. The current
situation there makes very little sense:
* At the PTE level, the ctor/dtor is not called (at least in the generic
implementation). Specific helpers are used for kernel pgtables at this
level (pte_{alloc,free}_kernel()) and those have never called the
ctor/dtor, most likely because they were initially irrelevant in the
kernel case.
* At all other levels, the ctor/dtor is normally called. This is
potentially wasteful at the PMD level (more on that later).
This series aims to ensure that the ctor/dtor is always called for kernel
pgtables, as it already is for user pgtables. Besides consistency, the
main motivation is to guarantee that ctor/dtor hooks are systematically
called; this makes it possible to insert hooks to protect page tables [2],
for instance. There is however an extra challenge: split locks are not
used for kernel pgtables, and it would therefore be wasteful to initialise
them (ptlock_init()).
It is worth clarifying exactly when split locks are used. They clearly
are for user pgtables, but as illustrated in commit
|
||
|
Dmitry V. Levin
|
cc6622730b |
syscall.h: introduce syscall_set_nr()
Similar to syscall_set_arguments() that complements syscall_get_arguments(), introduce syscall_set_nr() that complements syscall_get_nr(). syscall_set_nr() is going to be needed along with syscall_set_arguments() on all HAVE_ARCH_TRACEHOOK architectures to implement PTRACE_SET_SYSCALL_INFO API. Link: https://lkml.kernel.org/r/20250303112020.GD24170@strace.io Signed-off-by: Dmitry V. Levin <ldv@strace.io> Tested-by: Charlie Jenkins <charlie@rivosinc.com> Reviewed-by: Charlie Jenkins <charlie@rivosinc.com> Acked-by: Helge Deller <deller@gmx.de> # parisc Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> # mips Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Alexey Gladkov (Intel) <legion@kernel.org> Cc: Andreas Larsson <andreas@gaisler.com> Cc: anton ivanov <anton.ivanov@cambridgegreys.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Betkov <bp@alien8.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christian Zankel <chris@zankel.net> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davide Berardi <berardi.dav@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Eugene Syromiatnikov <esyr@redhat.com> Cc: Eugene Syromyatnikov <evgsyr@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Naveen N Rao <naveen@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Renzo Davoi <renzo@cs.unibo.it> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russel King <linux@armlinux.org.uk> Cc: Shuah Khan <shuah@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleinxer <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Dmitry V. Levin
|
17fc7b8f9b |
syscall.h: add syscall_set_arguments()
This function is going to be needed on all HAVE_ARCH_TRACEHOOK
architectures to implement PTRACE_SET_SYSCALL_INFO API.
This partially reverts commit
|
||
|
Matthew Wilcox (Oracle)
|
5071ea3d7b |
arch: remove mk_pmd()
There are now no callers of mk_huge_pmd() and mk_pmd(). Remove them. Link: https://lkml.kernel.org/r/20250402181709.2386022-12-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Muchun Song <muchun.song@linux.dev> Cc: Richard Weinberger <richard@nod.at> Cc: <x86@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
aec4417168 |
sparc32: remove custom definition of mk_pte()
Instead of defining pfn_pte() in terms of mk_pte(), make pfn_pte() the base implementation. That lets us use the generic definition of mk_pte(). Link: https://lkml.kernel.org/r/20250402181709.2386022-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Zi Yan <ziy@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Muchun Song <muchun.song@linux.dev> Cc: Richard Weinberger <richard@nod.at> Cc: <x86@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
cb5b13cd6c |
mm: introduce a common definition of mk_pte()
Most architectures simply call pfn_pte(). Centralise that as the normal definition and remove the definition of mk_pte() from the architectures which have either that exact definition or something similar. Link: https://lkml.kernel.org/r/20250402181709.2386022-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> # s390 Cc: Zi Yan <ziy@nvidia.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Muchun Song <muchun.song@linux.dev> Cc: Richard Weinberger <richard@nod.at> Cc: <x86@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Eric Biggers
|
648c7fb16f |
lib/crc: make arch-optimized code use subsys_initcall
Make the architecture-optimized CRC code do its CPU feature checks in subsys_initcalls instead of arch_initcalls. This makes it consistent with arch/*/lib/crypto/ and ensures that it runs after initcalls that possibly could be a prerequisite for kernel-mode FPU, such as x86's xfd_update_static_branch() and loongarch's init_euen_mask(). Note: as far as I can tell, x86's xfd_update_static_branch() isn't *actually* needed for kernel-mode FPU. loongarch's init_euen_mask() is needed to enable save/restore of the vector registers, but loongarch doesn't yet have any CRC or crypto code that uses vector registers anyway. Regardless, let's be consistent with arch/*/lib/crypto/ and robust against any potential future dependency on an arch_initcall. Link: https://lore.kernel.org/r/20250510035959.87995-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Herbert Xu
|
67488527af |
crypto: arch/sha256 - Export block functions as GPL only
Export the block functions as GPL only, there is no reason to let arbitrary modules use these internal functions. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
ef93f15628 |
Revert "crypto: run initcalls for generic implementations earlier"
This reverts commit
|
||
|
Eric Biggers
|
699618d422 |
crypto: sparc/sha256 - implement library instead of shash
Instead of providing crypto_shash algorithms for the arch-optimized SHA-256 code, instead implement the SHA-256 library. This is much simpler, it makes the SHA-256 library functions be arch-optimized, and it fixes the longstanding issue where the arch-optimized SHA-256 was disabled by default. SHA-256 still remains available through crypto_shash, but individual architectures no longer need to handle it. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
77735920ca |
crypto: sparc - move opcodes.h into asm directory
Since arch/sparc/crypto/opcodes.h is now needed outside the arch/sparc/crypto/ directory, move it into arch/sparc/include/asm/ so that it can be included as <asm/opcodes.h>. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Herbert Xu
|
fba4aafaba |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux v6.15-rc5
Merge mainline to pick up bcachefs poly1305 patch
|
||
|
Eric Biggers
|
ee858d83c5 |
sparc/crc: drop "glue" from filenames
The use of the term "glue" in filenames is a Crypto API-ism that rarely shows up elsewhere in lib/ or arch/*/lib/. I think adopting it there was a mistake. The library just uses standard functions, so the amount of code that could be considered "glue" is quite small. And while often the C functions just wrap the assembly functions, there are also cases like crc32c_arch() in arch/x86/lib/crc32-glue.c that blur the line by in-lining the actual implementation into the C function. That's not "glue code", but rather the actual code. Therefore, let's drop "glue" from the filenames and instead use e.g. crc32.c instead of crc32-glue.c. Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20250424002038.179114-7-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Eric Biggers
|
7ef377c4d4 |
lib/crc: make the CPU feature static keys __ro_after_init
All of the CRC library's CPU feature static_keys are initialized by initcalls and never change afterwards, so there's no need for them to be in the regular .data section. Put them in .data..ro_after_init instead. Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Link: https://lore.kernel.org/r/20250413154350.10819-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Herbert Xu
|
d8573b2cf7 |
crypto: sparc/sha512 - Use API partial block handling
Use the Crypto API partial block handling. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |