mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
215 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Niklas Schnelle
|
774a1fa880 |
s390/pci: Serialize device addition and removal
Prior changes ensured that when zpci_release_device() is called and it
removed the zdev from the zpci_list this instance can not be found via
the zpci_list anymore even while allowing re-add of reserved devices.
This only accounts for the overall lifetime and zpci_list addition and
removal, it does not yet prevent concurrent add of a new instance for
the same underlying device. Such concurrent add would subsequently cause
issues such as attempted re-use of the same IOMMU sysfs directory and is
generally undesired.
Introduce a new zpci_add_remove_lock mutex to serialize adding a new
device with removal. Together this ensures that if a struct zpci_dev is
not found in the zpci_list it was either already removed and torn down,
or its removal and tear down is in progress with the
zpci_add_remove_lock held.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Niklas Schnelle
|
4b1815a52d |
s390/pci: Allow re-add of a reserved but not yet removed device
The architecture assumes that PCI functions can be removed synchronously as PCI events are processed. This however clashes with the reference counting of struct pci_dev which allows device drivers to hold on to a struct pci_dev reference even as the underlying device is removed. To bridge this gap commit |
||
|
Niklas Schnelle
|
d76f963329 |
s390/pci: Remove redundant bus removal and disable from zpci_release_device()
Remove zpci_bus_remove_device() and zpci_disable_device() calls from
zpci_release_device(). These calls were done when the device
transitioned into the ZPCI_FN_STATE_STANDBY state which is guaranteed to
happen before it enters the ZPCI_FN_STATE_RESERVED state. When
zpci_release_device() is called the device is known to be in the
ZPCI_FN_STATE_RESERVED state which is also checked by a WARN_ON().
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Linus Torvalds
|
f90f2145b2 |
s390 updates for 6.15 merge window
- Add sorting of mcount locations at build time - Rework uaccess functions with C exception handling to shorten inline assembly size and enable full inlining. This yields near-optimal code for small constant copies with a ~40kb kernel size increase - Add support for a configurable STRICT_MM_TYPECHECKS which allows to generate better code, but also allows to have type checking for debug builds - Optimize get_lowcore() for common callers with alternatives that nearly revert to the pre-relocated lowcore code, while also slightly reducing syscall entry and exit time - Convert MACHINE_HAS_* checks for single facility tests into cpu_has_* style macros that call test_facility(), and for features with additional conditions, add a new ALT_TYPE_FEATURE alternative to provide a static branch via alternative patching. Also, move machine feature detection to the decompressor for early patching and add debugging functionality to easily show which alternatives are patched - Add exception table support to early boot / startup code to get rid of the open coded exception handling - Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE to ensure correct inlining and unrolling decisions - Remove 2k page table leftovers now that s390 has been switched to always allocate 4k page tables - Split kfence pool into 4k mappings in arch_kfence_init_pool() and remove the architecture-specific kfence_split_mapping() - Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence spurious KASAN warnings from opportunistic ftrace argument tracing - Force __atomic_add_const() variants on s390 to always return void, ensuring compile errors for improper usage - Remove s390's ioremap_wt() and pgprot_writethrough() due to mismatched semantics and lack of known users, relying on asm-generic fallbacks - Signal eventfd in vfio-ap to notify userspace when the guest AP configuration changes, including during mdev removal - Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap drivers to avoid fake flex array confusion - Cleanup trap code - Remove references to the outdated linux390@de.ibm.com address - Other various small fixes and improvements all over the code -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfmuPwACgkQjYWKoQLX FBgTDAgAjKmZ5OYjACRfYepTvKk9SDqa2CBlQZ+BhbAXEVIrxKnv8OkImAXoWNsM mFxiCxAHWdcD+nqTrxFsXhkNLsndijlwnj/IqZgvy6R/3yNtBlAYRPLujOmVrsQB dWB8Dl38p63Ip1JfAqyabiAOUjfhrclRcM5FX5tgciXA6N/vhY3OM6k0+k7wN4Nj Dei/rCrnYRXTrFQgtM4w8JTIrwdnXjeKvaTYCflh4Q5ISJ7TceSF7cqq8HOs5hhK o2ciaoTdx212522CIsxeN3Ls3jrn8bCOCoOeSCysc5RL84grAuFnmjSajo1LFide S/TQtHXYy78Wuei9xvHi561ogiv/ww== =Kxgc -----END PGP SIGNATURE----- Merge tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Add sorting of mcount locations at build time - Rework uaccess functions with C exception handling to shorten inline assembly size and enable full inlining. This yields near-optimal code for small constant copies with a ~40kb kernel size increase - Add support for a configurable STRICT_MM_TYPECHECKS which allows to generate better code, but also allows to have type checking for debug builds - Optimize get_lowcore() for common callers with alternatives that nearly revert to the pre-relocated lowcore code, while also slightly reducing syscall entry and exit time - Convert MACHINE_HAS_* checks for single facility tests into cpu_has_* style macros that call test_facility(), and for features with additional conditions, add a new ALT_TYPE_FEATURE alternative to provide a static branch via alternative patching. Also, move machine feature detection to the decompressor for early patching and add debugging functionality to easily show which alternatives are patched - Add exception table support to early boot / startup code to get rid of the open coded exception handling - Use asm_inline for all inline assemblies with EX_TABLE or ALTERNATIVE to ensure correct inlining and unrolling decisions - Remove 2k page table leftovers now that s390 has been switched to always allocate 4k page tables - Split kfence pool into 4k mappings in arch_kfence_init_pool() and remove the architecture-specific kfence_split_mapping() - Use READ_ONCE_NOCHECK() in regs_get_kernel_stack_nth() to silence spurious KASAN warnings from opportunistic ftrace argument tracing - Force __atomic_add_const() variants on s390 to always return void, ensuring compile errors for improper usage - Remove s390's ioremap_wt() and pgprot_writethrough() due to mismatched semantics and lack of known users, relying on asm-generic fallbacks - Signal eventfd in vfio-ap to notify userspace when the guest AP configuration changes, including during mdev removal - Convert mdev_types from an array to a pointer in vfio-ccw and vfio-ap drivers to avoid fake flex array confusion - Cleanup trap code - Remove references to the outdated linux390@de.ibm.com address - Other various small fixes and improvements all over the code * tag 's390-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (78 commits) s390: Use inline qualifier for all EX_TABLE and ALTERNATIVE inline assemblies s390/kfence: Split kfence pool into 4k mappings in arch_kfence_init_pool() s390/ptrace: Avoid KASAN false positives in regs_get_kernel_stack_nth() s390/boot: Ignore vmlinux.map s390/sysctl: Remove "vm/allocate_pgste" sysctl s390: Remove 2k vs 4k page table leftovers s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste() s390/lowcore: Use lghi instead llilh to clear register s390/syscall: Merge __do_syscall() and do_syscall() s390/spinlock: Implement SPINLOCK_LOCKVAL with inline assembly s390/smp: Implement raw_smp_processor_id() with inline assembly s390/current: Implement current with inline assembly s390/lowcore: Use inline qualifier for get_lowcore() inline assembly s390: Move s390 sysctls into their own file under arch/s390 s390/syscall: Simplify syscall_get_arguments() s390/vfio-ap: Notify userspace that guest's AP config changed when mdev removed s390: Remove ioremap_wt() and pgprot_writethrough() s390/mm: Add configurable STRICT_MM_TYPECHECKS s390/mm: Convert pgste_val() into function s390/mm: Convert pgprot_val() into function ... |
||
|
Ryan Roberts
|
86758b5048 |
mm/ioremap: pass pgprot_t to ioremap_prot() instead of unsigned long
ioremap_prot() currently accepts pgprot_val parameter as an unsigned long, thus implicitly assuming that pgprot_val and pgprot_t could never be bigger than unsigned long. But this assumption soon will not be true on arm64 when using D128 pgtables. In 128 bit page table configuration, unsigned long is 64 bit, but pgprot_t is 128 bit. Passing platform abstracted pgprot_t argument is better as compared to size based data types. Let's change the parameter to directly pass pgprot_t like another similar helper generic_ioremap_prot(). Without this change in place, D128 configuration does not work on arm64 as the top 64 bits gets silently stripped when passing the protection value to this function. Link: https://lkml.kernel.org/r/20250218101954.415331-1-anshuman.khandual@arm.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Co-developed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> [arm64] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Heiko Carstens
|
a1a8da0dec |
s390/pci: Get rid of MACHINE_HAS_PCI_MIO
Remove MACHINE_FLAG_PCI_MIO/MACHINE_HAS_PCI_MIO and implement the identical functionality with set_machine_feature(), clear_machine_feature() and test_machine_feature(). Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Matthew Rosato
|
0ed5967a0a |
iommu/s390: handle IOAT registration based on domain
At this point, the dma_table is really a property of the s390-iommu domain. Rather than checking its contents elsewhere in the codebase, move the code that registers the table with firmware into s390-iommu and make a decision what to register with firmware based upon the type of domain in use for the device in question. Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20250212213418.182902-4-mjrosato@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Linus Torvalds
|
509f806f7f |
more s390 updates for 6.13 merge window
- Add swap entry for hugetlbfs support - Add PTE_MARKER support for hugetlbs mappings; this fixes a regression (possible page fault loop) which was introduced when support for UFFDIO_POISON for hugetlbfs was added - Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support - Mark IRQ entries in entry code, so that stack tracers can filter out the non-IRQ parts of stack traces. This fixes stack depot capacity limit warnings, since without filtering the number of unique stack traces is huge - In PCI code fix leak of struct zpci_dev object, and fix potential double remove of hotplug slot - Fix pagefault_disable() / pagefault_enable() unbalance in arch_stack_user_walk_common() - A couple of inline assembly optimizations, more cmpxchg() to try_cmpxchg() conversions, and removal of usages of xchg() and cmpxchg() on one and two byte memory areas - Various other small improvements and cleanups -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmdJ3WoACgkQIg7DeRsp bsJt1RAAtlkbeN4+eVeYM4vBwHvgfAY/5Ii2wdHO2qwPHqBVkRtsqrmyewE/tVCF PZsYBXDDrzyAtLMqjlNGDQ1QexNLn4BELgSIysr45mxwMq1W33BiXvb8I5uK/V/7 /TcW2s1daJKKrbk+HBA8ZTwna5SeUSoZuh9y/n9SKVC4rRkWdeL7G1RRNQtafDlg aELCo17iHDZNoHeoRStOimZqVBwko6IQqQH4DCx2S4+J6nKQBGRyzGWIkLRoUxr6 MgNLrxekWjkoqAnXM0Ztb7LYg6AS/iOuGbqg/xLi1VJSWNCIf9zLpDs++SdFHoTU n4Cj07IHR4OLQ1YB+EX2uPY7rJw0tPt0g/dgmYYi3uP88hJ7VYFOtfJx/UGlid2q 3l7wXNwtg+CJtw0Ey+21cMdmnOffxH9c3nBPahe7zK5k1GKjXDOfWEcmucG0zW5K qYI5m7vAZAX4ve1362DOgJei/1uxGuMQQZsobHpwfhcGXzLZ2AZY45Ls86nQzHua KpupybWQe70hQYk9hUw+M/ShChuH8dhnPjx51T0r/0E0BdU6Q20xLPLWx/2jRzUb FlFg7WtVw2y45eQCFPbtVsoVzDCpfpfgTw5rrDsjFf/twS0E3ubmTC1rLr4YB+5m 5cjPys/SYpQWUi3wQFTQ6dL3w0+vWXlQmTi5ChcxTZF2ytwP+yg= =cfmM -----END PGP SIGNATURE----- Merge tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Heiko Carstens: - Add swap entry for hugetlbfs support - Add PTE_MARKER support for hugetlbs mappings; this fixes a regression (possible page fault loop) which was introduced when support for UFFDIO_POISON for hugetlbfs was added - Add ARCH_HAS_PREEMPT_LAZY and PREEMPT_DYNAMIC support - Mark IRQ entries in entry code, so that stack tracers can filter out the non-IRQ parts of stack traces. This fixes stack depot capacity limit warnings, since without filtering the number of unique stack traces is huge - In PCI code fix leak of struct zpci_dev object, and fix potential double remove of hotplug slot - Fix pagefault_disable() / pagefault_enable() unbalance in arch_stack_user_walk_common() - A couple of inline assembly optimizations, more cmpxchg() to try_cmpxchg() conversions, and removal of usages of xchg() and cmpxchg() on one and two byte memory areas - Various other small improvements and cleanups * tag 's390-6.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (27 commits) Revert "s390/mm: Allow large pages for KASAN shadow mapping" s390/spinlock: Use flag output constraint for arch_cmpxchg_niai8() s390/spinlock: Use R constraint for arch_load_niai4() s390/spinlock: Generate shorter code for arch_spin_unlock() s390/spinlock: Remove condition code clobber from arch_spin_unlock() s390/spinlock: Use symbolic names in inline assemblies s390: Support PREEMPT_DYNAMIC s390/pci: Fix potential double remove of hotplug slot s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails s390/mm/hugetlbfs: Add missing includes s390/mm: Add PTE_MARKER support for hugetlbfs mappings s390/mm: Introduce region-third and segment table swap entries s390/mm: Introduce region-third and segment table entry present bits s390/mm: Rearrange region-third and segment table entry SW bits KVM: s390: Increase size of union sca_utility to four bytes KVM: s390: Remove one byte cmpxchg() usage KVM: s390: Use try_cmpxchg() instead of cmpxchg() loops s390/ap: Replace xchg() with WRITE_ONCE() s390/mm: Allow large pages for KASAN shadow mapping s390: Add ARCH_HAS_PREEMPT_LAZY support ... |
||
|
Niklas Schnelle
|
c4a585e952 |
s390/pci: Fix potential double remove of hotplug slot
In commit |
||
|
Niklas Schnelle
|
48796104c8 |
s390/pci: Fix leak of struct zpci_dev when zpci_add_device() fails
Prior to commit |
||
|
Linus Torvalds
|
ceba6f6f33 |
IOMMU Updates for Linux v6.13:
Including:
- Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function.
- Introduce iommu_paging_domain_alloc_flags().
- Extend support for allocating PASID-capable domains to more
drivers.
- Remove iommu_present().
- Some smaller improvements.
- New IOMMU driver for RISC-V.
- Intel VT-d Updates:
- Add domain_alloc_paging support.
- Enable user space IOPFs in non-PASID and non-svm cases.
- Small code refactoring and cleanups.
- Add domain replacement support for pasid.
- AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default.
- Replace custom domain ID allocator with IDA allocator.
- Add ops->release_domain() support.
- Other improvements to device attach and domain allocation code
paths.
- ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their SMMU.
- Devicetree binding updates for Qualcomm MMU-500 implementations.
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue driver.
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage.
- Remove unused block-splitting support.
- S390 IOMMU:
- Implement support for blocking domain.
- Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186.
- OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver.
-----BEGIN PGP SIGNATURE-----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=V9hb
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
"Core Updates:
- Convert call-sites using iommu_domain_alloc() to more specific
versions and remove function
- Introduce iommu_paging_domain_alloc_flags()
- Extend support for allocating PASID-capable domains to more drivers
- Remove iommu_present()
- Some smaller improvements
New IOMMU driver for RISC-V
Intel VT-d Updates:
- Add domain_alloc_paging support
- Enable user space IOPFs in non-PASID and non-svm cases
- Small code refactoring and cleanups
- Add domain replacement support for pasid
AMD-Vi Updates:
- Adapt to iommu_paging_domain_alloc_flags() interface and alloc V2
page-tables by default
- Replace custom domain ID allocator with IDA allocator
- Add ops->release_domain() support
- Other improvements to device attach and domain allocation code
paths
ARM-SMMU Updates:
- SMMUv2:
- Return -EPROBE_DEFER for client devices probing before their
SMMU
- Devicetree binding updates for Qualcomm MMU-500 implementations
- SMMUv3:
- Minor fixes and cleanup for NVIDIA's virtual command queue
driver
- IO-PGTable:
- Fix indexing of concatenated PGDs and extend selftest coverage
- Remove unused block-splitting support
S390 IOMMU:
- Implement support for blocking domain
Mediatek IOMMU:
- Enable 35-bit physical address support for mt8186
OMAP IOMMU driver:
- Adapt to recent IOMMU core changes and unbreak driver"
* tag 'iommu-updates-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (92 commits)
iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift
iommu: Make set_dev_pasid op support domain replacement
iommu/arm-smmu-v3: Make set_dev_pasid() op support replace
iommu/vt-d: Add set_dev_pasid callback for nested domain
iommu/vt-d: Make identity_domain_set_dev_pasid() to handle domain replacement
iommu/vt-d: Make intel_svm_set_dev_pasid() support domain replacement
iommu/vt-d: Limit intel_iommu_set_dev_pasid() for paging domain
iommu/vt-d: Make intel_iommu_set_dev_pasid() to handle domain replacement
iommu/vt-d: Add iommu_domain_did() to get did
iommu/vt-d: Consolidate the struct dev_pasid_info add/remove
iommu/vt-d: Add pasid replace helpers
iommu/vt-d: Refactor the pasid setup helpers
iommu/vt-d: Add a helper to flush cache for updating present pasid entry
iommu: Pass old domain to set_dev_pasid op
iommu/iova: Fix typo 'adderss'
iommu: Add a kdoc to iommu_unmap()
iommu/io-pgtable-arm-v7s: Remove split on unmap behavior
iommu/io-pgtable-arm: Remove split on unmap behavior
iommu/vt-d: Drain PRQs when domain removed from RID
iommu/vt-d: Drop pasid requirement for prq initialization
...
|
||
|
Matthew Rosato
|
ecda483339 |
iommu/s390: Implement blocking domain
This fixes a crash when surprise hot-unplugging a PCI device. This crash
happens because during hot-unplug __iommu_group_set_domain_nofail()
attaching the default domain fails when the platform no longer
recognizes the device as it has already been removed and we end up with
a NULL domain pointer and UAF. This is exactly the case referred to in
the second comment in __iommu_device_set_domain() and just as stated
there if we can instead attach the blocking domain the UAF is prevented
as this can handle the already removed device. Implement the blocking
domain to use this handling. With this change, the crash is fixed but
we still hit a warning attempting to change DMA ownership on a blocked
device.
Fixes:
|
||
|
Niklas Schnelle
|
0467cdde8c |
s390/pci: Sort PCI functions prior to creating virtual busses
Instead of relying on the observed but not architected firmware behavior that PCI functions from the same card are listed in ascending RID order in clp_list_pci() ensure this by sorting. To allow for sorting separate the initial clp_list_pci() and creation of the virtual PCI busses. Note that fundamentally in our per-PCI function hotplug design non RID order of discovery is still possible. For example when the two PFs of a two port NIC are hotplugged after initial boot and in descending RID order. In this case the virtual PCI bus would be created by the second PF using that PF's UID as domain number instead of that of the first PF. Thus the domain number would then change from the UID of the second PF to that of the first PF on reboot but there is really nothing we can do about that since changing domain numbers at runtime seems even worse. This only impacts the domain number as the RIDs are consistent and thus even with just the second PF visible it will show up in the correct position on the virtual bus. Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Lukas Wunner
|
265baca69a |
s390/pci: Stop usurping pdev->dev.groups
Bjorn suggests using pdev->dev.groups for attribute_groups constructed on PCI device enumeration: "Is it feasible to build an attribute group in pci_doe_init() and add it to dev->groups so device_add() will automatically add them?" https://lore.kernel.org/r/20231019165829.GA1381099@bhelgaas Unfortunately on s390, pcibios_device_add() usurps pdev->dev.groups for arch-specific attribute_groups, preventing its use for anything else. Introduce an ARCH_PCI_DEV_GROUPS macro which arches can define in <asm/pci.h>. The macro is visible in drivers/pci/pci-sysfs.c through the inclusion of <linux/pci.h>, which in turn includes <asm/pci.h>. On s390, define the macro to the three attribute_groups previously assigned to pdev->dev.groups. Thereby pdev->dev.groups is made available for use by the PCI core. As a side effect, arch/s390/pci/pci_sysfs.c no longer needs to be compiled into the kernel if CONFIG_SYSFS=n. Link: https://lore.kernel.org/r/7b970f7923e373d1b23784721208f93418720485.1722870934.git.lukas@wunner.de Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> |
||
|
Sven Schnelle
|
208da1d5fc |
s390: Replace S390_lowcore by get_lowcore()
Replace all S390_lowcore usages in arch/s390/ by get_lowcore(). Acked-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Jason Gunthorpe
|
e7bc47b166 |
s390: Stop using weak symbols for __iowrite64_copy()
Complete switching the __iowriteXX_copy() routines over to use #define and arch provided inline/macro functions instead of weak symbols. S390 has an implementation that simply calls another memcpy function. Inline this so the callers don't have to do two jumps. Link: https://lore.kernel.org/r/3-v3-1893cd8b9369+1925-mlx5_arm_wc_jgg@nvidia.com Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> |
||
|
Linus Torvalds
|
691632f0e8 |
s390 updates for 6.9 merge window
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device driver, and
export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation counters
are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to improve
steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to avoid a too
small heap
- Various changes to allow s390 to be compiled with LLVM=1, since ld.lld and
llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful with s390's
FPU code where some users have up to 520 byte stack frames. Clearing such
stack frames (if INIT_STACK_ALL_PATTERN or INIT_STACK_ALL_ZERO is enabled)
before they are used contradicts the intention (performance improvement) of
such code sections.
- Convert switch_to() to an out-of-line function, and use the generic switch_to
header file
- Replace the usage of s390's debug feature with pr_debug() calls within the
zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to C, mainly
by using singe instruction inline assemblies. This increases readability,
but also allows makes it easier to add proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and csum_partial_copy_nocheck() based
on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following problems if
the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses to allow
more than 64k sections. This can break features which use
'-ffunction-sections' and '-fdata-sections', including kpatch-build and
function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of indirection
for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
-----BEGIN PGP SIGNATURE-----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=KZ31
-----END PGP SIGNATURE-----
Merge tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Fix error handling in Processor Activity Instrumentation device
driver, and export number of counters with a sysfs file
- Allow for multiple events when Processor Activity Instrumentation
counters are monitored in system wide sampling
- Change multiplier and shift values of the Time-of-Day clock source to
improve steering precision
- Remove a couple of unneeded GFP_DMA flags from allocations
- Disable mmap alignment if randomize_va_space is also disabled, to
avoid a too small heap
- Various changes to allow s390 to be compiled with LLVM=1, since
ld.lld and llvm-objcopy will have proper s390 support witch clang 19
- Add __uninitialized macro to Compiler Attributes. This is helpful
with s390's FPU code where some users have up to 520 byte stack
frames. Clearing such stack frames (if INIT_STACK_ALL_PATTERN or
INIT_STACK_ALL_ZERO is enabled) before they are used contradicts the
intention (performance improvement) of such code sections.
- Convert switch_to() to an out-of-line function, and use the generic
switch_to header file
- Replace the usage of s390's debug feature with pr_debug() calls
within the zcrypt device driver
- Improve hotplug support of the Adjunct Processor device driver
- Improve retry handling in the zcrypt device driver
- Various changes to the in-kernel FPU code:
- Make in-kernel FPU sections preemptible
- Convert various larger inline assemblies and assembler files to
C, mainly by using singe instruction inline assemblies. This
increases readability, but also allows makes it easier to add
proper instrumentation hooks
- Cleanup of the header files
- Provide fast variants of csum_partial() and
csum_partial_copy_nocheck() based on vector instructions
- Introduce and use a lock to synchronize accesses to zpci device data
structures to avoid inconsistent states caused by concurrent accesses
- Compile the kernel without -fPIE. This addresses the following
problems if the kernel is compiled with -fPIE:
- It uses dynamic symbols (.dynsym), for which the linker refuses
to allow more than 64k sections. This can break features which
use '-ffunction-sections' and '-fdata-sections', including
kpatch-build and function granular KASLR
- It unnecessarily uses GOT relocations, adding an extra layer of
indirection for many memory accesses
- Fix shared_cpu_list for CPU private L2 caches, which incorrectly were
reported as globally shared
* tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (117 commits)
s390/tools: handle rela R_390_GOTPCDBL/R_390_GOTOFF64
s390/cache: prevent rebuild of shared_cpu_list
s390/crypto: remove retry loop with sleep from PAES pkey invocation
s390/pkey: improve pkey retry behavior
s390/zcrypt: improve zcrypt retry behavior
s390/zcrypt: introduce retries on in-kernel send CPRB functions
s390/ap: introduce mutex to lock the AP bus scan
s390/ap: rework ap_scan_bus() to return true on config change
s390/ap: clarify AP scan bus related functions and variables
s390/ap: rearm APQNs bindings complete completion
s390/configs: increase number of LOCKDEP_BITS
s390/vfio-ap: handle hardware checkstop state on queue reset operation
s390/pai: change sampling event assignment for PMU device driver
s390/boot: fix minor comment style damages
s390/boot: do not check for zero-termination relocation entry
s390/boot: make type of __vmlinux_relocs_64_start|end consistent
s390/boot: sanitize kaslr_adjust_relocs() function prototype
s390/boot: simplify GOT handling
s390: vmlinux.lds.S: fix .got.plt assertion
s390/boot: workaround current 'llvm-objdump -t -j ...' behavior
...
|
||
|
Jason Gunthorpe
|
723a2cc8d6 |
s390: use the correct count for __iowrite64_copy()
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()
Fixes:
|
||
|
Gerd Bayer
|
d0c8fd2100 |
s390/pci: fix three typos in comments
Found and fixed these while working on synchronizing the state handling of zpci_dev's. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Gerd Bayer
|
6ee600bfbe |
s390/pci: remove hotplug slot when releasing the device
Centralize the removal so all paths are covered and the hotplug slot will remain active until the device is really destroyed. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Gerd Bayer
|
bcb5d6c769 |
s390/pci: introduce lock to synchronize state of zpci_dev's
There's a number of tasks that need the state of a zpci device to be stable. Other tasks need to be synchronized as they change the state. State changes could be generated by the system as availability or error events, or be requested by the user through manipulations in sysfs. Some other actions accessible through sysfs - like device resets - need the state to be stable. Unsynchronized state handling could lead to unusable devices. This has been observed in cases of concurrent state changes through systemd udev rules and DPM boot control. Some breakage can be provoked by artificial tests, e.g. through repetitively injecting "recover" on a PCI function through sysfs while running a "hotplug remove/add" in a loop through a PCI slot's "power" attribute in sysfs. After a few iterations this could result in a kernel oops. So introduce a new mutex "state_lock" to guard the state property of the struct zpci_dev. Acquire this lock in all task that modify the state: - hotplug add and remove, through the PCI hotplug slot entry, - avaiability events, as reported by the platform, - error events, as reported by the platform, - during device resets, explicit through sysfs requests or implict through the common PCI layer. Break out an inner _do_recover() routine out of recover_store() to separte the necessary synchronizations from the actual manipulations of the zpci_dev required for the reset. With the following changes I was able to run the inject loops for hours without hitting an error. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Gerd Bayer
|
0d48566d4b |
s390/pci: rename lock member in struct zpci_dev
Since this guards only the Function Measurement Block, rename from generic lock to fmb_lock in preparation to introduce another lock that guards the state member Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Linus Torvalds
|
4bbdb725a3 |
IOMMU Updates for Linux v6.7
Including:
- Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate
drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
- ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to
move the CD table into the master, paving the way
for '->set_dev_pasid()' support on non-SVA domains
- Minor cleanups to the SVA code
- Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function.
- AMD IOMMU:
- Initial patches for SVA support (not complete yet)
- S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
- Some smaller fixes and improvements
-----BEGIN PGP SIGNATURE-----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=UyWC
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
"Core changes:
- Make default-domains mandatory for all IOMMU drivers
- Remove group refcounting
- Add generic_single_device_group() helper and consolidate drivers
- Cleanup map/unmap ops
- Scaling improvements for the IOVA rcache depot
- Convert dart & iommufd to the new domain_alloc_paging()
ARM-SMMU:
- Device-tree binding update:
- Add qcom,sm7150-smmu-v2 for Adreno on SM7150 SoC
- SMMUv2:
- Support for Qualcomm SDM670 (MDSS) and SM7150 SoCs
- SMMUv3:
- Large refactoring of the context descriptor code to move the CD
table into the master, paving the way for '->set_dev_pasid()'
support on non-SVA domains
- Minor cleanups to the SVA code
Intel VT-d:
- Enable debugfs to dump domain attached to a pasid
- Remove an unnecessary inline function
AMD IOMMU:
- Initial patches for SVA support (not complete yet)
S390 IOMMU:
- DMA-API conversion and optimized IOTLB flushing
And some smaller fixes and improvements"
* tag 'iommu-updates-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (102 commits)
iommu/dart: Remove the force_bypass variable
iommu/dart: Call apple_dart_finalize_domain() as part of alloc_paging()
iommu/dart: Convert to domain_alloc_paging()
iommu/dart: Move the blocked domain support to a global static
iommu/dart: Use static global identity domains
iommufd: Convert to alloc_domain_paging()
iommu/vt-d: Use ops->blocked_domain
iommu/vt-d: Update the definition of the blocking domain
iommu: Move IOMMU_DOMAIN_BLOCKED global statics to ops->blocked_domain
Revert "iommu/vt-d: Remove unused function"
iommu/amd: Remove DMA_FQ type from domain allocation path
iommu: change iommu_map_sgtable to return signed values
iommu/virtio: Add __counted_by for struct viommu_request and use struct_size()
iommu/vt-d: debugfs: Support dumping a specified page table
iommu/vt-d: debugfs: Create/remove debugfs file per {device, pasid}
iommu/vt-d: debugfs: Dump entry pointing to huge page
iommu/vt-d: Remove unused function
iommu/arm-smmu-v3-sva: Remove bond refcount
iommu/arm-smmu-v3-sva: Remove unused iommu_sva handle
iommu/arm-smmu-v3: Rename cdcfg to cd_table
...
|
||
|
Niklas Schnelle
|
92bce97f0c |
s390/pci: Fix reset of IOMMU software counters
Together with enabling the Function Measurement Block zpci_fmb_enable_device() also resets the software counters. This allows to use "echo 0 > /sys/kernel/debug/pci/<dev>/statistics" followed by echo "1 > /../statistics" to reset all counters. In commit |
||
|
Niklas Schnelle
|
c76c067e48 |
s390/pci: Use dma-iommu layer
While s390 already has a standard IOMMU driver and previous changes have added I/O TLB flushing operations this driver is currently only used for user-space PCI access such as vfio-pci. For the DMA API s390 instead utilizes its own implementation in arch/s390/pci/pci_dma.c which drives the same hardware and shares some code but requires a complex and fragile hand over between DMA API and IOMMU API use of a device and despite code sharing still leads to significant duplication and maintenance effort. Let's utilize the common code DMAP API implementation from drivers/iommu/dma-iommu.c instead allowing us to get rid of arch/s390/pci/pci_dma.c. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20230928-dma_iommu-v13-3-9e5fc4dacc36@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Heiko Carstens
|
99441a38c3 |
s390: use control register bit defines
Use control register bit defines instead of plain numbers where possible. Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Heiko Carstens
|
8d5e98f8d6 |
s390/ctlreg: add local and system prefix to some functions
Add local and system prefix to some functions to clarify they change control register contents on either the local CPU or the on all CPUs. This results in the following API: Two defines which load and save multiple control registers. The defines correlate with the following C prototypes: void __local_ctl_load(unsigned long *, unsigned int cr_low, unsigned int cr_high); void __local_ctl_store(unsigned long *, unsigned int cr_low, unsigned int cr_high); Two functions which locally set or clear one bit for a specified control register: void local_ctl_set_bit(unsigned int cr, unsigned int bit); void local_ctl_clear_bit(unsigned int cr, unsigned int bit); Two functions which set or clear one bit for a specified control register on all CPUs: void system_ctl_set_bit(unsigned int cr, unsigned int bit); void system_ctl_clear_bit(unsigend int cr, unsigned int bit); Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Baoquan He
|
b43b3fff04 |
s390: mm: convert to GENERIC_IOREMAP
By taking GENERIC_IOREMAP method, the generic generic_ioremap_prot(), generic_iounmap(), and their generic wrapper ioremap_prot(), ioremap() and iounmap() are all visible and available to arch. Arch needs to provide wrapper functions to override the generic versions if there's arch specific handling in its ioremap_prot(), ioremap() or iounmap(). This change will simplify implementation by removing duplicated code with generic_ioremap_prot() and generic_iounmap(), and has the equivalent functioality as before. Here, add wrapper functions ioremap_prot() and iounmap() for s390's special operation when ioremap() and iounmap(). And also replace including <asm-generic/io.h> with <asm/io.h> in arch/s390/kernel/perf_cpum_sf.c, otherwise building error will be seen because macro defined in <asm/io.h> can't be seen in perf_cpum_sf.c. Link: https://lkml.kernel.org/r/20230706154520.11257-11-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Tested-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Chris Zankel <chris@zankel.net> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonas Bonn <jonas@southpole.se> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Rich Felker <dalias@libc.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Vasily Gorbik
|
f62f8b716d |
Merge branch 'uaccess-inline-asm-cleanup' into features
Heiko Carstens says: =================== There are a couple of oddities within the s390 uaccess library functions. Therefore cleanup the whole uaccess.c file. There is no functional change, only improved readability. The output of "objdump -Dr" was always compared before/after each patch to make sure that the generated object file is identical, if that could be expected. Therefore the series also includes more patches than really required to cleanup the code. Furthermore the kunit usercopy tests also still pass. =================== Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Niklas Schnelle
|
45e5f0c017 |
s390/pci: clean up left over special treatment for function zero
Prior to commit
|
||
|
Niklas Schnelle
|
ab90950985 |
PCI: s390: Fix use-after-free of PCI resources with per-function hotplug
On s390 PCI functions may be hotplugged individually even when they belong to a multi-function device. In particular on an SR-IOV device VFs may be removed and later re-added. In commit |
||
|
Niklas Schnelle
|
2ba8336dab |
iommu/s390: Use RCU to allow concurrent domain_list iteration
The s390_domain->devices list is only added to when new devices are attached but is iterated through in read-only fashion for every mapping operation as well as for I/O TLB flushes and thus in performance critical code causing contention on the s390_domain->list_lock. Fortunately such a read-mostly linked list is a standard use case for RCU. This change closely follows the example fpr RCU protected list given in Documentation/RCU/listRCU.rst. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Link: https://lore.kernel.org/r/20221109142903.4080275-4-schnelle@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Niklas Schnelle
|
59bbf59679 |
iommu/s390: Make attach succeed even if the device is in error state
If a zPCI device is in the error state while switching IOMMU domains zpci_register_ioat() will fail and we would end up with the device not attached to any domain. In this state since zdev->dma_table == NULL a reset via zpci_hot_reset_device() would wrongfully re-initialize the device for DMA API usage using zpci_dma_init_device(). As automatic recovery is currently disabled while attached to an IOMMU domain this only affects slot resets triggered through other means but will affect automatic recovery once we switch to using dma-iommu. Additionally with that switch common code expects attaching to the default domain to always work so zpci_register_ioat() should only fail if there is no chance to recover anyway, e.g. if the device has been unplugged. Improve the robustness of attach by specifically looking at the status returned by zpci_mod_fc() to determine if the device is unavailable and in this case simply ignore the error. Once the device is reset zpci_hot_reset_device() will then correctly set the domain's DMA translation tables. Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20221109142903.4080275-2-schnelle@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel@suse.de> |
||
|
Matthew Rosato
|
09340b2fca |
KVM: s390: pci: add routines to start/stop interpretive execution
These routines will be invoked at the time an s390x vfio-pci device is associated with a KVM (or when the association is removed), allowing the zPCI device to enable or disable load/store intepretation mode; this requires the host zPCI device to inform firmware of the unique token (GISA designation) that is associated with the owning KVM. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Link: https://lore.kernel.org/r/20220606203325.110625-17-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> |
||
|
Matthew Rosato
|
98b1d33dac |
KVM: s390: pci: do initial setup for AEN interpretation
Initial setup for Adapter Event Notification Interpretation for zPCI passthrough devices. Specifically, allocate a structure for forwarding of adapter events and pass the address of this structure to firmware. Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220606203325.110625-13-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> |
||
|
Matthew Rosato
|
c68468ed34 |
s390/pci: stash associated GISA designation
For passthrough devices, we will need to know the GISA designation of the guest if interpretation facilities are to be used. Setup to stash this in the zdev and set a default of 0 (no GISA designation) for now; a subsequent patch will set a valid GISA designation for passthrough devices. Also, extend mpcific routines to specify this stashed designation as part of the mpcific command. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20220606203325.110625-9-mjrosato@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com> |
||
|
Niklas Schnelle
|
52c79e636a |
s390/pci: make better use of zpci_dbg() levels
While the zpci_dbg() macro offers a level parameter this is currently largely unused. The only instance with higher importance than 3 is the UID checking change debug message which is not actually more important as the UID uniqueness guarantee is already exposed in sysfs so this should rather be 3 as well. On the other hand the "add ..." message which shows what devices are visible at the lowest level is essential during problem determination. By setting its level to 1, lowering the debug level can act as a filter to only show the available functions. On the error side the default level is set to 6 while all existing messages are printed at level 0. This is inconsistent and means there is no room for having messages be invisible on the default level so instead set the default level to 3 like for errors matching the default for debug messages. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Niklas Schnelle
|
7dcfe50f58 |
s390/pci: rename get_zdev_by_bus() to zdev_from_bus()
Getting a zpci_dev via get_zdev_by_bus() uses the long lived reference held in zbus->function[devfn]. This is accounted for in pcibios_add_device() and pcibios_release_device(). Therefore there is no need to increment the reference count in get_zdev_by_bus() as is done for get_zdev_by_fid(). Instead callers must not access the device after pcibios_release_device() was called which is necessary for common PCI code anyway. With this though the very similar naming may be misleading so rename get_zdev_by_bus() to zdev_from_bus() emphasizing that we are directly referencing the zdev via the bus. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Niklas Schnelle
|
c122383d22 |
s390/pci: improve zpci_dev reference counting
Currently zpci_dev uses kref based reference counting but only accounts
for one original reference plus one reference from an added pci_dev to
its underlying zpci_dev. Counting just the original reference worked
until the pci_dev reference was added in commit
|
||
|
Niklas Schnelle
|
568de506e3 |
s390/pci: use physical addresses in DMA tables
The entries in the DMA translation tables for our IOMMU must specify physical addresses of either the next level table or the final page to be mapped for DMA. Currently however the code simply passes the virtual addresses of both. On the other hand we still need to walk the tables via their virtual addresses so we need to do a phys_to_virt() when setting the entries and a virt_to_phys() when getting them. Similarly when passing the I/O translation anchor to the hardware we must also specify its physical address. As the DMA and IOMMU APIs we are implementing already use the correct phys_addr_t type for the address to be mapped let's also thread this through instead of treating it as just an unsigned long. Note: this currently doesn't fix a real bug, since virtual addresses are indentical to physical ones. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Niklas Schnelle
|
4cdf2f4e24 |
s390/pci: implement minimal PCI error recovery
When the platform detects an error on a PCI function or a service action has been performed it is put in the error state and an error event notification is provided to the OS. Currently we treat all error event notifications the same and simply set pdev->error_state = pci_channel_io_perm_failure requiring user intervention such as use of the recover attribute to get the device usable again. Despite requiring a manual step this also has the disadvantage that the device is completely torn down and recreated resulting in higher level devices such as a block or network device being recreated. In case of a block device this also means that it may need to be removed and added to a software raid even if that could otherwise survive with a temporary degradation. This is of course not ideal more so since an error notification with PEC 0x3A indicates that the platform already performed error recovery successfully or that the error state was caused by a service action that is now finished. At least in this case we can assume that the error state can be reset and the function made usable again. So as not to have the disadvantage of a full tear down and recreation we need to coordinate this recovery with the driver. Thankfully there is already a well defined recovery flow for this described in Documentation/PCI/pci-error-recovery.rst. The implementation of this is somewhat straight forward and simplified by the fact that our recovery flow is defined per PCI function. As a reset we use the newly introduced zpci_hot_reset_device() which also takes the PCI function out of the error state. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Acked-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Niklas Schnelle
|
da995d538d |
s390/pci: implement reset_slot for hotplug slot
This is done by adding a zpci_hot_reset_device() call which does a low level reset of the PCI function without changing its higher level function state. This way it can be used while the zPCI function is bound to a driver and with DMA tables being controlled either through the IOMMU or DMA APIs which is prohibited when using zpci_disable_device() as that drop existing DMA translations. As this reset, unlike a normal FLR, also calls zpci_clear_irq() we need to implement arch_restore_msi_irqs() and make sure we re-enable IRQs for the PCI function if they were previously disabled. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Niklas Schnelle
|
4fe2049770 |
s390/pci: refresh function handle in iomap
The function handle of a PCI function is updated when disabling or enabling it as well as when the function's availability changes or it enters the error state. Until now this only occurred either while there is no struct pci_dev associated with the function yet or the function became unavailable. This meant that leaving a stale function handle in the iomap either didn't happen because there was no iomap yet or it lead to errors on PCI access but so would the correct disabled function handle. In the future a CLP Set PCI Function Disable/Enable cycle during PCI device recovery may be done while the device is bound to a driver. In this case we must update the iomap associated with the now-stale function handle to ensure that the resulting zPCI instruction references an accurate function handle. Since the function handle is accessed by the PCI accessor helpers without locking use READ_ONCE()/WRITE_ONCE() to mark this access and prevent compiler optimizations that would move the load/store. With that infrastructure in place let's also properly update the function handle in the existing cases. This makes sure that in the future debugging of a zPCI function access through the handle will show an up to date handle reducing the chance of confusion. Also it makes sure we have one single place where a zPCI function handle is updated after initialization. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Linus Torvalds
|
0c5c62ddf8 |
pci-v5.16-changes
-----BEGIN PGP SIGNATURE-----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=nsMh
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Conserve IRQs by setting up portdrv IRQs only when there are users
(Jan Kiszka)
- Rework and simplify _OSC negotiation for control of PCIe features
(Joerg Roedel)
- Remove struct pci_dev.driver pointer since it's redundant with the
struct device.driver pointer (Uwe Kleine-König)
Resource management:
- Coalesce contiguous host bridge apertures from _CRS to accommodate
BARs that cover more than one aperture (Kai-Heng Feng)
Sysfs:
- Check CAP_SYS_ADMIN before parsing user input (Krzysztof
Wilczyński)
- Return -EINVAL consistently from "store" functions (Krzysztof
Wilczyński)
- Use sysfs_emit() in endpoint "show" functions to avoid buffer
overruns (Kunihiko Hayashi)
PCIe native device hotplug:
- Ignore Link Down/Up caused by resets during error recovery so
endpoint drivers can remain bound to the device (Lukas Wunner)
Virtualization:
- Avoid bus resets on Atheros QCA6174, where they hang the device
(Ingmar Klein)
- Work around Pericom PI7C9X2G switch packet drop erratum by using
store and forward mode instead of cut-through (Nathan Rossi)
- Avoid trying to enable AtomicOps on VFs; the PF setting applies to
all VFs (Selvin Xavier)
MSI:
- Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
Song)
VPD:
- Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
in the possible VPD space; use these to simplify the cxgb3 driver
(Heiner Kallweit)
Peer-to-peer DMA:
- Add (not subtract) the bus offset when calculating DMA address
(Wang Lu)
ASPM:
- Re-enable LTR at Downstream Ports so they don't report Unsupported
Requests when reset or hot-added devices send LTR messages
(Mingchuang Qiao)
Apple PCIe controller driver:
- Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
Zyngier)
Cadence PCIe controller driver:
- Return success when probe succeeds instead of falling into error
path (Li Chen)
HiSilicon Kirin PCIe controller driver:
- Reorganize PHY logic and add support for external PHY drivers
(Mauro Carvalho Chehab)
- Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
Carvalho Chehab)
- Add Kirin 970 support (Mauro Carvalho Chehab)
- Make driver removable (Mauro Carvalho Chehab)
Intel VMD host bridge driver:
- If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
enabled (Adrian Huang)
- Number each controller so we can tell them apart in
/proc/interrupts (Chunguang Xu)
- Avoid building on UML because VMD depends on x86 bare metal APIs
(Johannes Berg)
Marvell Aardvark PCIe controller driver:
- Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
- Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
- Downgrade PIO Response Status messages to debug level (Marek Behún)
- Preserve CRS SV (Config Request Retry Software Visibility) bit in
emulated Root Control register (Pali Rohár)
- Fix issue in configuring reference clock (Pali Rohár)
- Don't clear status bits for masked interrupts (Pali Rohár)
- Don't mask unused interrupts (Pali Rohár)
- Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
- Retry config accesses on CRS response (Pali Rohár)
- Simplify emulated Root Capabilities initialization (Pali Rohár)
- Fix several link training issues (Pali Rohár)
- Fix link-up checking via LTSSM (Pali Rohár)
- Fix reporting of Data Link Layer Link Active (Pali Rohár)
- Fix emulation of W1C bits (Marek Behún)
- Fix MSI domain .alloc() method to return zero on success (Marek
Behún)
- Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
(Marek Behún)
- Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
at startup; PCI core will set those as necessary (Pali Rohár)
- When operating as a Root Port, set class code to "PCI Bridge"
instead of the default "Mass Storage Controller" (Pali Rohár)
- Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
implement this per spec (Pali Rohár)
- Add emulation of option ROM BAR since aardvark doesn't implement
this per spec (Pali Rohár)
MediaTek MT7621 PCIe controller driver:
- Add MediaTek MT7621 PCIe host controller driver and DT binding
(Sergio Paracuellos)
Qualcomm PCIe controller driver:
- Add SC8180x compatible string (Bjorn Andersson)
- Add endpoint controller driver and DT binding (Manivannan
Sadhasivam)
- Restructure to use of_device_get_match_data() (Prasad Malisetty)
- Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)
Renesas R-Car PCIe controller driver:
- Remove unnecessary includes (Geert Uytterhoeven)
Rockchip DesignWare PCIe controller driver:
- Add DT binding (Simon Xue)
Socionext UniPhier Pro5 controller driver:
- Serialize INTx masking/unmasking (Kunihiko Hayashi)
Synopsys DesignWare PCIe controller driver:
- Run dwc .host_init() method before registering MSI interrupt
handler so we can deal with pending interrupts left by bootloader
(Bjorn Andersson)
- Clean up Kconfig dependencies (Andy Shevchenko)
- Export symbols to allow more modular drivers (Luca Ceresoli)
TI DRA7xx PCIe controller driver:
- Allow host and endpoint drivers to be modules (Luca Ceresoli)
- Enable external clock if present (Luca Ceresoli)
TI J721E PCIe driver:
- Disable PHY when probe fails after initializing it (Christophe
JAILLET)
MicroSemi Switchtec management driver:
- Return error to application when command execution fails because an
out-of-band reset has cleared the device BARs, Memory Space Enable,
etc (Kelvin Cao)
- Fix MRPC error status handling issue (Kelvin Cao)
- Mask out other bits when reading of management VEP instance ID
(Kelvin Cao)
- Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
(Kelvin Cao)
- Add check of event support (Logan Gunthorpe)
Miscellaneous:
- Remove unused pci_pool wrappers, which have been replaced by
dma_pool (Cai Huoqing)
- Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
Wilczyński)
- Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
Wilczyński)
- Fix some sscanf(), sprintf() format mismatches (Krzysztof
Wilczyński)
- Update PCI subsystem information in MAINTAINERS (Krzysztof
Wilczyński)
- Correct some misspellings (Krzysztof Wilczyński)"
* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
PCI: Add ACS quirk for Pericom PI7C9X2G switches
PCI: apple: Configure RID to SID mapper on device addition
iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
PCI: apple: Implement MSI support
PCI: apple: Add INTx and per-port interrupt support
PCI: kirin: Allow removing the driver
PCI: kirin: De-init the dwc driver
PCI: kirin: Disable clkreq during poweroff sequence
PCI: kirin: Move the power-off code to a common routine
PCI: kirin: Add power_off support for Kirin 960 PHY
PCI: kirin: Allow building it as a module
PCI: kirin: Add MODULE_* macros
PCI: kirin: Add Kirin 970 compatible
PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
PCI: apple: Set up reference clocks when probing
PCI: apple: Add initial hardware bring-up
PCI: of: Allow matching of an interrupt-map local to a PCI device
of/irq: Allow matching of an interrupt-map local to an interrupt controller
irqdomain: Make of_phandle_args_to_fwspec() generally available
PCI: Do not enable AtomicOps on VFs
...
|
||
|
Niklas Schnelle
|
a46044a92a |
s390/pci: fix zpci_zdev_put() on reserve
Since commit |
||
|
Oliver O'Halloran
|
06dc660e6e |
PCI: Rename pcibios_add_device() to pcibios_device_add()
The general convention for pcibios_* hooks is that they're named after the corresponding pci_* function they provide a hook for. The exception is pcibios_add_device() which provides a hook for pci_device_add(). Rename pcibios_add_device() to pcibios_device_add() so it matches pci_device_add(). Also, remove the export of the microblaze version. The only caller must be compiled as a built-in so there's no reason for the export. Link: https://lore.kernel.org/r/20210913152709.48013-1-oohall@gmail.com Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> # s390 |
||
|
Linus Torvalds
|
c7a5238ef6 |
s390 updates for 5.15 merge window
- Improve ftrace code patching so that stop_machine is not required anymore. This requires a small common code patch acked by Steven Rostedt: https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/ - Enable KCSAN for s390. This comes with a small common code change to fix a compile warning. Acked by Marco Elver: https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com - Add KFENCE support for s390. This also comes with a minimal x86 patch from Marco Elver who said also this can be carried via the s390 tree: https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/ - More changes to prepare the decompressor for relocation. - Enable DAT also for CPU restart path. - Final set of register asm removal patches; leaving only three locations where needed and sane. - Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO support to hwcaps flags. - Cleanup hwcaps implementation. - Add new instructions to in-kernel disassembler. - Various QDIO cleanups. - Add SCLP debug feature. - Various other cleanups and improvements all over the place. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmEs1GsACgkQIg7DeRsp bsJ9+A/9FApCECNPgu6jOX4Ee+no+LxpCPUF8rvt56TFTLv7+Dhm7fJl0xQ9utsZ FyLMDAr1/FKdm2wBW23QZH4vEIt1bd6e/03DwwK+6IjHKZHRIfB8eGJMsLj/TDzm K6/+FI7qXjvpNXxgkCqXf5yESi/y5Dgr+16kTBhPZj5awRiwe5puPamji3uiQ45V r4MdGCCC9BnTZvtPpUrr8ImnUqHJ4/TMo1YYdykLbZFuAvvYUyZ5YG5kh0pMa8JZ DGJpfLQfy7ZNscIzdVhZtfzzESVtS6/AOeBzDMO1pbM1CGXtvpJJP0Wjlr/PGwoW fvuMHpqTlDi+TfNZiPP5lwsFC89xSd6gtZH7vAuI8kFCXgW3RMjABF6h/mzpH1WO jXyaSEZROc/83gxPMYyOYiqrKyAFPbpZ/Rnav2bvGQGneqx7RvmpF3GgA9WEo1PW rMDoEbLstJuHk0E2uEV+OnQd5F7MHNonzpYfp/7pyQ+PL8w2GExV9yngVc/f3TqG HYLC9rc3K6DkxZappcJm0qTb7lDTMFI7xK3g9RiqPQBJE1v1MYE/rai48nW69ypE bRNL76AjyXKo+zKR2wlhJVMY1I1+DarMopHhZj6fzQT5te1LLsv8OuTU2gkt6dIq YoSYOYvModf3HbKnJul2tszQG9yl+vpE9MiCyBQSsxIYXCriq/c= =WDRh -----END PGP SIGNATURE----- Merge tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - Improve ftrace code patching so that stop_machine is not required anymore. This requires a small common code patch acked by Steven Rostedt: https://lore.kernel.org/linux-s390/20210730220741.4da6fdf6@oasis.local.home/ - Enable KCSAN for s390. This comes with a small common code change to fix a compile warning. Acked by Marco Elver: https://lore.kernel.org/r/20210729142811.1309391-1-hca@linux.ibm.com - Add KFENCE support for s390. This also comes with a minimal x86 patch from Marco Elver who said also this can be carried via the s390 tree: https://lore.kernel.org/linux-s390/YQJdarx6XSUQ1tFZ@elver.google.com/ - More changes to prepare the decompressor for relocation. - Enable DAT also for CPU restart path. - Final set of register asm removal patches; leaving only three locations where needed and sane. - Add NNPA, Vector-Packed-Decimal-Enhancement Facility 2, PCI MIO support to hwcaps flags. - Cleanup hwcaps implementation. - Add new instructions to in-kernel disassembler. - Various QDIO cleanups. - Add SCLP debug feature. - Various other cleanups and improvements all over the place. * tag 's390-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (105 commits) s390: remove SCHED_CORE from defconfigs s390/smp: do not use nodat_stack for secondary CPU start s390/smp: enable DAT before CPU restart callback is called s390: update defconfigs s390/ap: fix state machine hang after failure to enable irq KVM: s390: generate kvm hypercall functions s390/sclp: add tracing of SCLP interactions s390/debug: add early tracing support s390/debug: fix debug area life cycle s390/debug: keep debug data on resize s390/diag: make restart_part2 a local label s390/mm,pageattr: fix walk_pte_level() early exit s390: fix typo in linker script s390: remove do_signal() prototype and do_notify_resume() function s390/crypto: fix all kernel-doc warnings in vfio_ap_ops.c s390/pci: improve DMA translation init and exit s390/pci: simplify CLP List PCI handling s390/pci: handle FH state mismatch only on disable s390/pci: fix misleading rc in clp_set_pci_fn() s390/boot: factor out offset_vmlinux_info() function ... |
||
|
Niklas Schnelle
|
1f3f76812d |
s390/pci: improve DMA translation init and exit
Currently zpci_dma_init_device()/zpci_dma_exit_device() is called as part of zpci_enable_device()/zpci_disable_device() and errors for zpci_dma_exit_device() are always ignored even if we could abort. Improve upon this by moving zpci_dma_exit_device() out of zpci_disable_device() and check for errors whenever we have a way to abort the current operation. Note that for example in zpci_event_hard_deconfigured() the device is expected to be gone so we really can't abort and proceed even in case of error. Similarly move the cc == 3 special case out of zpci_unregister_ioat() and into the callers allowing to abort when finding an already disabled devices precludes proceeding with the operation. While we are at it log IOAT register/unregister errors in the s390 debugfs log, Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |
||
|
Niklas Schnelle
|
cc049eecfb |
s390/pci: simplify CLP List PCI handling
Currently clp_get_state() and clp_refresh_fh() awkwardly use the clp_list_pci() callback mechanism to find the entry for a specific FID and update its zdev, respectively return its state. This is both needlessly complex and means we are always going through the entire PCI function list even if the FID has already been found. Instead lets introduce a clp_find_pci() function to find a specific entry and share the CLP List PCI request handling code with clp_list_pci(). With that in place we can also easily make the function handle a simple out parameter instead of directly altering the zdev allowing easier access to the updated function handle by the caller. Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> |