Since commit 4b63491838 ("arm64/mm: Close theoretical race where stale
TLB entry remains valid"), all arches that use tlbbatch for reclaim
(arm64, riscv, x86) implement arch_flush_tlb_batched_pending() with a
flush_tlb_mm().
So let's simplify by removing the unnecessary abstraction and doing the
flush_tlb_mm() directly in flush_tlb_batched_pending(). This effectively
reverts commit db6c1f6f23 ("mm/tlbbatch: introduce
arch_flush_tlb_batched_pending()").
Link: https://lkml.kernel.org/r/20250609103132.447370-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Suggested-by: Will Deacon <will@kernel.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
riscv patches for 6.16-rc1, part 2
* Performance improvements
- Add support for vdso getrandom
- Implement raid6 calculations using vectors
- Introduce svinval tlb invalidation
* Cleanup
- A bunch of deduplication of the macros we use for manipulating instructions
* Misc
- Introduce a kunit test for kprobes
- Add support for mseal as riscv fits the requirements (thanks to Lorenzo for making sure of that :))
[Palmer: There was a rebase between part 1 and part 2, so I've had to do
some more git surgery here... at least two rounds of surgery...]
* alex-pr-2: (866 commits)
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
riscv: Add kprobes KUnit test
riscv: kprobes: Remove duplication of RV_EXTRACT_ITYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_UTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RD_REG
riscv: kprobes: Remove duplication of RVC_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RVC_EXTRACT_C2_RS1_REG
riscv: kproves: Remove duplication of RVC_EXTRACT_JTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_BTYPE_IMM
riscv: kprobes: Remove duplication of RV_EXTRACT_RS1_REG
riscv: kprobes: Remove duplication of RV_EXTRACT_JTYPE_IMM
riscv: kprobes: Move branch_funct3 to insn.h
riscv: kprobes: Move branch_rs2_idx to insn.h
Linux 6.15-rc6
Input: xpad - fix xpad_device sorting
Input: xpad - add support for several more controllers
Input: xpad - fix Share button on Xbox One controllers
...
The Svinval extension splits SFENCE.VMA instruction into finer-grained
invalidation and ordering operations and is mandatory for RVA23S64 profile.
When Svinval is enabled the local_flush_tlb_range_threshold_asid function
should use the following sequence to optimize the tlb flushes instead of
a simple sfence.vma:
sfence.w.inval
svinval.vma
.
.
svinval.vma
sfence.inval.ir
The maximum number of consecutive svinval.vma instructions that
can be executed in local_flush_tlb_range_threshold_asid function
is limited to 64. This is required to avoid soft lockups and the
approach is similar to that used in arm64.
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240702102637.9074-1-mchitale@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
This is required to allow the IOMMU driver to correctly flush its own
TLB.
Reviewed-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20250113142424.30487-1-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
This patch lays the groundwork for supporting batch PTE unmapping in
try_to_unmap_one(). It introduces range handling for TLB batch flushing,
with the range currently set to the size of PAGE_SIZE.
The function __flush_tlb_range_nosync() is architecture-specific and is
only used within arch/arm64. This function requires the mm structure
instead of the vma structure. To allow its reuse by
arch_tlbbatch_add_pending(), which operates with mm but not vma, this
patch modifies the argument of __flush_tlb_range_nosync() to take mm as
its parameter.
Link: https://lkml.kernel.org/r/20250214093015.51024-3-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shaoqin Huang <shahuang@redhat.com>
Cc: Gavin Shan <gshan@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chis Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mauricio Faria de Oliveira <mfo@canonical.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* Support for byte/half-word compare-and-exchange, emulated via LR/SC
loops.
* Support for Rust.
* Support for Zihintpause in hwprobe.
* Support for the PR_RISCV_SET_ICACHE_FLUSH_CTX prctl().
* Support for lockless lockrefs.
-----BEGIN PGP SIGNATURE-----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=YLoD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Add byte/half-word compare-and-exchange, emulated via LR/SC loops
- Support for Rust
- Support for Zihintpause in hwprobe
- Add PR_RISCV_SET_ICACHE_FLUSH_CTX prctl()
- Support lockless lockrefs
* tag 'riscv-for-linus-6.10-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (42 commits)
riscv: defconfig: Enable CONFIG_CLK_SOPHGO_CV1800
riscv: select ARCH_HAS_FAST_MULTIPLIER
riscv: mm: still create swiotlb buffer for kmalloc() bouncing if required
riscv: Annotate pgtable_l{4,5}_enabled with __ro_after_init
riscv: Remove redundant CONFIG_64BIT from pgtable_l{4,5}_enabled
riscv: mm: Always use an ASID to flush mm contexts
riscv: mm: Preserve global TLB entries when switching contexts
riscv: mm: Make asid_bits a local variable
riscv: mm: Use a fixed layout for the MM context ID
riscv: mm: Introduce cntx2asid/cntx2version helper macros
riscv: Avoid TLB flush loops when affected by SiFive CIP-1200
riscv: Apply SiFive CIP-1200 workaround to single-ASID sfence.vma
riscv: mm: Combine the SMP and UP TLB flush code
riscv: Only send remote fences when some other CPU is online
riscv: mm: Broadcast kernel TLB flushes only when needed
riscv: Use IPIs for remote cache/TLB flushes by default
riscv: Factor out page table TLB synchronization
riscv: Flush the instruction cache during SMP bringup
riscv: hwprobe: export Zihintpause ISA extension
riscv: misaligned: remove CONFIG_RISCV_M_MODE specific code
...
Even if multiple ASIDs are not supported, using the single-ASID variant
of the sfence.vma instruction preserves TLB entries for global (kernel)
pages. So it is always more efficient to use the single-ASID code path.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-14-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
When using the ASID allocator, the MM context ID contains two values:
the ASID in the lower bits, and the allocator version number in the
remaining bits. Use macros to make this separation more obvious.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-10-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implementations affected by SiFive errata CIP-1200 have a bug which
forces the kernel to always use the global variant of the sfence.vma
instruction. When affected by this errata, do not attempt to flush a
range of addresses; each iteration of the loop would actually flush the
whole TLB instead. Instead, minimize the overall number of sfence.vma
instructions.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20240327045035.368512-9-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 3f1e782998 ("riscv: add ASID-based tlbflushing methods") added
calls to the sfence.vma instruction with rs2 != x0. These single-ASID
instruction variants are also affected by SiFive errata CIP-1200.
Until now, the errata workaround was not needed for the single-ASID
sfence.vma variants, because they were only used when the ASID allocator
was enabled, and the affected SiFive platforms do not support multiple
ASIDs. However, we are going to start using those sfence.vma variants
regardless of ASID support, so now we need alternatives covering them.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-8-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If no other CPU is online, a local cache or TLB flush is sufficient.
These checks can be constant-folded when SMP is disabled.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327045035.368512-6-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
__flush_tlb_range() avoids broadcasting TLB flushes when an mm context
is only active on the local CPU. Apply this same optimization to TLB
flushes of kernel memory when only one CPU is online. This check can be
constant-folded when SMP is disabled.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240327045035.368512-5-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
An IPI backend is always required in an SMP configuration, but an SBI
implementation is not. For example, SBI will be unavailable when the
kernel runs in M mode. For this reason, consider IPI delivery of cache
and TLB flushes to be the base case, and any other implementation (such
as the SBI remote fence extension) to be an optimization.
Generally, if IPIs can be delivered without firmware assistance, they
are assumed to be faster than SBI calls due to the SBI context switch
overhead. However, when SBI is used as the IPI backend, then the context
switch cost must be paid anyway, and performing the cache/TLB flush
directly in the SBI implementation is more efficient than injecting an
interrupt to S-mode. This is the only existing scenario where
riscv_ipi_set_virq_range() is called with use_for_rfence set to false.
sbi_ipi_init() already checks riscv_ipi_have_virq_range(), so it only
calls riscv_ipi_set_virq_range() when no other IPI device is available.
This allows moving the static key and dropping the use_for_rfence
parameter. This decouples the static key from the irqchip driver probe
order.
Furthermore, the static branch only makes sense when CONFIG_RISCV_SBI is
enabled. Optherwise, IPIs must be used. Add a fallback definition of
riscv_use_sbi_for_rfence() which handles this case and removes the need
to check CONFIG_RISCV_SBI elsewhere, such as in cacheflush.c.
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327045035.368512-4-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
__flush_tlb_range() does not modify the provided cpumask, so its cmask
parameter can be pointer-to-const. This avoids the unsafe cast of
cpu_online_mask.
Fixes: 54d7431af7 ("riscv: Add support for BATCHED_UNMAP_TLB_FLUSH")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240301201837.2826172-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We must clear the cpumask once we have flushed the batch, otherwise cpus
get accumulated and we end sending IPIs to more cpus than needed.
Fixes: 54d7431af7 ("riscv: Add support for BATCHED_UNMAP_TLB_FLUSH")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20240130115508.105386-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The spare_init() calls memmap_populate() many times to create VA to PA
mapping for the VMEMMAP area, where all "struct page" are located once
CONFIG_SPARSEMEM_VMEMMAP is defined. These "struct page" are later
initialized in the zone_sizes_init() function. However, during this
process, no sfence.vma instruction is executed for this VMEMMAP area.
This omission may cause the hart to fail to perform page table walk
because some data related to the address translation is invisible to the
hart. To solve this issue, the local_flush_tlb_kernel_range() is called
right after the sparse_init() to execute a sfence.vma instruction for this
VMEMMAP area, ensuring that all data related to the address translation
is visible to the hart.
Fixes: d95f1a542c ("RISC-V: Implement sparsemem")
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240117140333.2479667-1-vincent.chen@sifive.com
Fixes: 7a92fc8b4d ("mm: Introduce flush_cache_vmap_early()")
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This includes everything from part 2:
* Support for tuning for systems with fast misaligned accesses.
* Support for SBI-based suspend.
* Support for the new SBI debug console extension.
* The T-Head CMOs now use PA-based flushes.
* Support for enabling the V extension in kernel code.
* Optimized IP checksum routines.
* Various ftrace improvements.
* Support for archrandom, which depends on the Zkr extension.
and then also a fix for those:
* The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
-----BEGIN PGP SIGNATURE-----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=Sjhj
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Support for tuning for systems with fast misaligned accesses.
- Support for SBI-based suspend.
- Support for the new SBI debug console extension.
- The T-Head CMOs now use PA-based flushes.
- Support for enabling the V extension in kernel code.
- Optimized IP checksum routines.
- Various ftrace improvements.
- Support for archrandom, which depends on the Zkr extension.
- The build is no longer broken under NET=n, KUNIT=y for ports that
don't define their own ipv6 checksum.
* tag 'riscv-for-linus-6.8-mw4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (56 commits)
lib: checksum: Fix build with CONFIG_NET=n
riscv: lib: Check if output in asm goto supported
riscv: Fix build error on rv32 + XIP
riscv: optimize ELF relocation function in riscv
RISC-V: Implement archrandom when Zkr is available
riscv: Optimize hweight API with Zbb extension
riscv: add dependency among Image(.gz), loader(.bin), and vmlinuz.efi
samples: ftrace: Add RISC-V support for SAMPLE_FTRACE_DIRECT[_MULTI]
riscv: ftrace: Add DYNAMIC_FTRACE_WITH_DIRECT_CALLS support
riscv: ftrace: Make function graph use ftrace directly
riscv: select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY
lib/Kconfig.debug: Update AS_HAS_NON_CONST_LEB128 comment and name
riscv: Restrict DWARF5 when building with LLVM to known working versions
riscv: Hoist linker relaxation disabling logic into Kconfig
kunit: Add tests for csum_ipv6_magic and ip_fast_csum
riscv: Add checksum library
riscv: Add checksum header
riscv: Add static key for misaligned accesses
asm-generic: Improve csum_fold
RISC-V: selftests: cbo: Ensure asm operands match constraints
...
Allow to defer the flushing of the TLB when unmapping pages, which allows
to reduce the numbers of IPI and the number of sfence.vma.
The ubenchmarch used in commit 43b3dfdd04 ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration") that
was multithreaded to force the usage of IPI shows good performance
improvement on all platforms:
* Unmatched: ~34%
* TH1520 : ~78%
* Qemu : ~81%
In addition, perf on qemu reports an important decrease in time spent
dealing with IPIs:
Before: 68.17% main [kernel.kallsyms] [k] __sbi_rfence_v02_call
After : 8.64% main [kernel.kallsyms] [k] __sbi_rfence_v02_call
* Benchmark:
int stick_this_thread_to_core(int core_id) {
int num_cores = sysconf(_SC_NPROCESSORS_ONLN);
if (core_id < 0 || core_id >= num_cores)
return EINVAL;
cpu_set_t cpuset;
CPU_ZERO(&cpuset);
CPU_SET(core_id, &cpuset);
pthread_t current_thread = pthread_self();
return pthread_setaffinity_np(current_thread,
sizeof(cpu_set_t), &cpuset);
}
static void *fn_thread (void *p_data)
{
int ret;
pthread_t thread;
stick_this_thread_to_core((int)p_data);
while (1) {
sleep(1);
}
return NULL;
}
int main()
{
volatile unsigned char *p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_SHARED | MAP_ANONYMOUS, -1, 0);
pthread_t threads[4];
int ret;
for (int i = 0; i < 4; ++i) {
ret = pthread_create(&threads[i], NULL, fn_thread, (void *)i);
if (ret)
{
printf("%s", strerror (ret));
}
}
memset(p, 0x88, SIZE);
for (int k = 0; k < 10000; k++) {
/* swap in */
for (int i = 0; i < SIZE; i += 4096) {
(void)p[i];
}
/* swap out */
madvise(p, SIZE, MADV_PAGEOUT);
}
for (int i = 0; i < 4; i++)
{
pthread_cancel(threads[i]);
}
for (int i = 0; i < 4; i++)
{
pthread_join(threads[i], NULL);
}
return 0;
}
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Jisheng Zhang <jszhang@kernel.org> # Tested on TH1520
Tested-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20240108193640.344929-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The pcpu setup when using the page allocator sets up a new vmalloc
mapping very early in the boot process, so early that it cannot use the
flush_cache_vmap() function which may depend on structures not yet
initialized (for example in riscv, we currently send an IPI to flush
other cpus TLB).
But on some architectures, we must call flush_cache_vmap(): for example,
in riscv, some uarchs can cache invalid TLB entries so we need to flush
the new established mapping to avoid taking an exception.
So fix this by introducing a new function flush_cache_vmap_early() which
is called right after setting the new page table entry and before
accessing this new mapping. This new function implements a local flush
tlb on riscv and is no-op for other architectures (same as today).
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
This function used to simply flush the whole tlb of all harts, be more
subtile and try to only flush the range.
The problem is that we can only use PAGE_SIZE as stride since we don't know
the size of the underlying mapping and then this function will be improved
only if the size of the region to flush is < threshold * PAGE_SIZE.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when the range to flush covers more than one page (a 4K page or
a hugepage), __flush_tlb_range() flushes the whole tlb. Flushing the whole
tlb comes with a greater cost than flushing a single entry so we should
flush single entries up to a certain threshold so that:
threshold * cost of flushing a single entry < cost of flushing the whole
tlb.
Co-developed-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20231030133027.19542-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
flush_tlb_range() uses a fixed stride of PAGE_SIZE and in its current form,
when a hugetlb mapping needs to be flushed, flush_tlb_range() flushes the
whole tlb: so set a stride of the size of the hugetlb mapping in order to
only flush the hugetlb mapping. However, if the hugepage is a NAPOT region,
all PTEs that constitute this mapping must be invalidated, so the stride
size must actually be the size of the PTE.
Note that THPs are directly handled by flush_pmd_tlb_range().
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For now, tlb_flush() simply calls flush_tlb_mm() which results in a
flush of the whole TLB. So let's use mmu_gather fields to provide a more
fine-grained flush of the TLB.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # On RZ/Five SMARC
Link: https://lore.kernel.org/r/20231030133027.19542-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If we have specialized interrupt controller (such as AIA IMSIC) which
allows supervisor mode to directly inject IPIs without any assistance
from M-mode or HS-mode then using such specialized interrupt controller,
we can do remote TLB flushes directly from supervisor mode instead of
using the SBI RFENCE calls.
This patch extends remote TLB flush functions to use supervisor mode
IPIs whenever direct supervisor mode IPIs.are supported by interrupt
controller.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230328035223.1480939-6-apatel@ventanamicro.com
Currently, we pass the CONTEXTID instead of the ASID to the TLB flush
function. We should only take the ASID field to prevent from touching
the reserved bit field.
Fixes: 3f1e782998 ("riscv: add ASID-based tlbflushing methods")
Signed-off-by: Dylan Jhong <dylan@andestech.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Link: https://lore.kernel.org/r/20230313034906.2401730-1-dylan@andestech.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This reverts the remaining bits of commit 4bd1d80efb ("riscv: mm:
notify remote harts harts about mmu cache updates").
According to bug reports, suggested approach to fix stale TLB entries
is not sufficient. It needs to be replaced by a more robust solution.
Fixes: 4bd1d80efb ("riscv: mm: notify remote harts about mmu cache updates")
Reported-by: Zong Li <zong.li@sifive.com>
Reported-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Cc: stable@vger.kernel.org
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230226150137.1919750-2-geomatsi@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Current implementation of update_mmu_cache function performs local TLB
flush. It does not take into account ASID information. Besides, it does
not take into account other harts currently running the same mm context
or possible migration of the running context to other harts. Meanwhile
TLB flush is not performed for every context switch if ASID support
is enabled.
Patch [1] proposed to add ASID support to update_mmu_cache to avoid
flushing local TLB entirely. This patch takes into account other
harts currently running the same mm context as well as possible
migration of this context to other harts.
For this purpose the approach from flush_icache_mm is reused. Remote
harts currently running the same mm context are informed via SBI calls
that they need to flush their local TLBs. All the other harts are marked
as needing a deferred TLB flush when this mm context runs on them.
[1] https://lore.kernel.org/linux-riscv/20220821013926.8968-1-tjytimi@163.com/
Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Fixes: 65d4b9c530 ("RISC-V: Implement ASID allocator")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-riscv/20220829205219.283543-1-geomatsi@gmail.com/#t
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, SBI APIs accept a hartmask that is generated from struct
cpumask. Cpumask data structure can hold upto NR_CPUs value. Thus, it
is not the correct data structure for hartids as it can be higher
than NR_CPUs for platforms with sparse or discontguous hartids.
Remove all association between hartid mask and struct cpumask.
Reviewed-by: Anup Patel <anup@brainfault.org> (For Linux RISC-V changes)
Acked-by: Anup Patel <anup@brainfault.org> (For KVM RISC-V changes)
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Implement optimized version of the tlb flushing routines for systems
using ASIDs. These are behind the use_asid_allocator static branch to
not affect existing systems not using ASIDs.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
[hch: rebased on top of previous cleanups, use the same algorithm as
the non-ASID based code for local vs global flushes, keep functions
as local as possible]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Move the call mm_cpumask from the callers into __sbi_tlb_flush_range to
reduce a bit of duplicate code and prepare for future changes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Bring Transparent HugePage support to riscv. A
transparent huge page is always represented as a pmd.
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add a parameter: stride for __sbi_tlb_flush_range(),
represent the page stride between the address of start and end.
Normally, the stride is PAGE_SIZE, and when flush huge page
address, the stride can be the huge page size such as:PMD_SIZE,
then it only need to flush one tlb entry if the address range
within PMD_SIZE.
Signed-off-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
If tlbflush request is for page only, there is no need to do a
complete local tlb shootdown.
Just do a local tlb flush for the given address.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
In RISC-V, tlb flush happens via SBI which is expensive. If the local
cpu is the only cpu in cpumask, there is no need to invoke a SBI call.
Just do a local flush and return.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
SBI calls are expensive. If cpumask is empty, there is no need to
trap via SBI as no remote tlb flushing is required.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The TLB flush logic is going to become more complex. Start moving
it out of line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[paul.walmsley@sifive.com: fixed checkpatch whitespace warnings]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
