Zicbop introduces cache blocks prefetching instructions, add the
necessary support for the kernel to use it in the coming commits.
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20250421142441.395849-3-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The S-type instructions are first introduced and then used to define the
encoding of the Zicbop prefetching instructions.
Co-developed-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Tested-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20250421142441.395849-2-alexghiti@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
We have duplicated the definition of the nop instruction in ftrace.h and
in jump_label.c. Move this definition into the generic file insn-def.h
so that they can share the definition with each other and with future
files.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250319-runtime_const_riscv-v10-1-745b31a11d65@rivosinc.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
RISC-V code uses the generic ticket lock implementation, which calls
the macros smp_cond_load_relaxed() and smp_cond_load_acquire().
Introduce a RISC-V specific implementation of smp_cond_load_relaxed()
which applies WRS.NTO of the Zawrs extension in order to reduce power
consumption while waiting and allows hypervisors to enable guests to
trap while waiting. smp_cond_load_acquire() doesn't need a RISC-V
specific implementation as the generic implementation is based on
smp_cond_load_relaxed() and smp_acquire__after_ctrl_dep() sufficiently
provides the acquire semantics.
This implementation is heavily based on Arm's approach which is the
approach Andrea Parri also suggested.
The Zawrs specification can be found here:
https://github.com/riscv/riscv-zawrs/blob/main/zawrs.adoc
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Co-developed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240426100820.14762-11-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
If we're going to provide the encoding for 'pause' in cpu_relax()
anyway, then we can drop the toolchain checks and just always use
it. The advantage of doing this is that other code that need
pause don't need to also define it (yes, another use is coming).
Add the definition to insn-def.h since it's an instruction
definition and also because insn-def.h doesn't include much, so
it's safe to include from asm/vdso/processor.h without concern for
circular dependencies.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240426100820.14762-9-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The CMO op macros initially used lower case, as the original iteration
of the ALT_CMO_OP alternative stringified the first parameter to
finalise the assembly for the standard variant.
As a knock-on, the T-Head versions of these CMOs had to use mixed case
defines. Commit dd23e95358 ("RISC-V: replace cbom instructions with
an insn-def") removed the asm construction with stringify, replacing it
an insn-def macro, rending the lower-case surplus to requirements.
As far as I can tell from a brief check, CBO_zero does not see similar
use and didn't require the mixed case define in the first place.
Replace the lower case characters now for consistency with other
insn-def macros in the standard and T-Head forms, and adjust the
callsites.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230915-aloe-dollar-994937477776@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Using memset() to zero a 4K page takes 563 total instructions, where
20 are branches. clear_page(), with Zicboz and a 64 byte block size,
takes 169 total instructions, where 4 are branches and 33 are nops.
Even though the block size is a variable, thanks to alternatives, we
can still implement a Duff device without having to do any preliminary
calculations. This is achieved by using the alternatives' cpufeature
value (the upper 16 bits of patch_id). The value used is the maximum
zicboz block size order accepted at the patch site. This enables us
to stop patching / unrolling when 4K bytes have been zeroed (we would
loop and continue after 4K if the page size would be larger)
For 4K pages, unrolling 16 times allows block sizes of 64 and 128 to
only loop a few times and larger block sizes to not loop at all. Since
cbo.zero doesn't take an offset, we also need an 'add' after each
instruction, making the loop body 112 to 160 bytes. Hopefully this
is small enough to not cause icache misses.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230224162631.405473-7-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CBO instructions use the I-type of instruction format where
the immediate is used to identify the CBO instruction type.
Add I-type instruction encoding support to insn-def.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230108163356.3063839-2-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We should prefer HINVAL.GVMA and HINVAL.VVMA instruction for local TLB
maintenance when underlying host supports Svinval extension.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Introduce hlv instruction encodings and apply them to KVM's use.
We're careful not to introduce hlv.d to 32-bit builds. Indeed,
we ensure the build fails if someone tries to use it.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
Introduce hfence instruction encodings and apply them to KVM's use.
With the self-documenting nature of the instruction encoding macros,
and a spec always within arm's reach, it's safe to remove the
comments, so we do that too.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
When compiling with toolchains that haven't yet been taught about
new instructions we need to encode them ourselves. Create a new file
where support for instruction definitions will evolve. We initiate
the file with a macro called INSN_R(), which implements the R-type
instruction encoding. INSN_R() will use the assembler's .insn
directive when available, which should give the assembler a chance
to do some validation. When .insn is not available we fall back to
manual encoding.
Not only should using instruction encoding macros improve readability
and maintainability of code over the alternative of inserting
instructions directly (e.g. '.word 0xc0de'), but we should also gain
potential for more optimized code after compilation because the
compiler will have control over the input and output registers used.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Anup Patel <anup@brainfault.org>
