mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
9273 commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
e6de688e93 |
Devicetree updates for v6.13:
Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples.
Fix the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys address
of the DTB as __pa() is not always valid to use. This fixes a warning
for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports and
endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever possible
-----BEGIN PGP SIGNATURE-----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=NCYS
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
||
|
Linus Torvalds
|
aad3a0d084 |
ftrace updates for v6.13:
- Merged tag ftrace-v6.12-rc4 There was a fix to locking in register_ftrace_graph() for shadow stacks that was sent upstream. But this code was also being rewritten, and the locking fix was needed. Merging this fix was required to continue the work. - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZztrUxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qnnNAQD6w4q9VQ7oOE2qKLqtnj87h4c1GqKn SPkpEfC3n/ATEAD/fnYjT/eOSlHiGHuD/aTA+U/bETrT99bozGM/4mFKEgY= =6nCa -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: - Restructure the function graph shadow stack to prepare it for use with kretprobes With the goal of merging the shadow stack logic of function graph and kretprobes, some more restructuring of the function shadow stack is required. Move out function graph specific fields from the fgraph infrastructure and store it on the new stack variables that can pass data from the entry callback to the exit callback. Hopefully, with this change, the merge of kretprobes to use fgraph shadow stacks will be ready by the next merge window. - Make shadow stack 4k instead of using PAGE_SIZE. Some architectures have very large PAGE_SIZE values which make its use for shadow stacks waste a lot of memory. - Give shadow stacks its own kmem cache. When function graph is started, every task on the system gets a shadow stack. In the future, shadow stacks may not be 4K in size. Have it have its own kmem cache so that whatever size it becomes will still be efficient in allocations. - Initialize profiler graph ops as it will be needed for new updates to fgraph - Convert to use guard(mutex) for several ftrace and fgraph functions - Add more comments and documentation - Show function return address in function graph tracer Add an option to show the caller of a function at each entry of the function graph tracer, similar to what the function tracer does. - Abstract out ftrace_regs from being used directly like pt_regs ftrace_regs was created to store a partial pt_regs. It holds only the registers and stack information to get to the function arguments and return values. On several archs, it is simply a wrapper around pt_regs. But some users would access ftrace_regs directly to get the pt_regs which will not work on all archs. Make ftrace_regs an abstract structure that requires all access to its fields be through accessor functions. - Show how long it takes to do function code modifications When code modification for function hooks happen, it always had the time recorded in how long it took to do the conversion. But this value was never exported. Recently the code was touched due to new ROX modification handling that caused a large slow down in doing the modifications and had a significant impact on boot times. Expose the timings in the dyn_ftrace_total_info file. This file was created a while ago to show information about memory usage and such to implement dynamic function tracing. It's also an appropriate file to store the timings of this modification as well. This will make it easier to see the impact of changes to code modification on boot up timings. - Other clean ups and small fixes * tag 'ftrace-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits) ftrace: Show timings of how long nop patching took ftrace: Use guard to take ftrace_lock in ftrace_graph_set_hash() ftrace: Use guard to take the ftrace_lock in release_probe() ftrace: Use guard to lock ftrace_lock in cache_mod() ftrace: Use guard for match_records() fgraph: Use guard(mutex)(&ftrace_lock) for unregister_ftrace_graph() fgraph: Give ret_stack its own kmem cache fgraph: Separate size of ret_stack from PAGE_SIZE ftrace: Rename ftrace_regs_return_value to ftrace_regs_get_return_value selftests/ftrace: Fix check of return value in fgraph-retval.tc test ftrace: Use arch_ftrace_regs() for ftrace_regs_*() macros ftrace: Consolidate ftrace_regs accessor functions for archs using pt_regs ftrace: Make ftrace_regs abstract from direct use fgragh: No need to invoke the function call_filter_check_discard() fgraph: Simplify return address printing in function graph tracer function_graph: Remove unnecessary initialization in ftrace_graph_ret_addr() function_graph: Support recording and printing the function return address ftrace: Have calltime be saved in the fgraph storage ftrace: Use a running sleeptime instead of saving on shadow stack fgraph: Use fgraph data to store subtime for profiler ... |
||
|
Linus Torvalds
|
bf9aa14fc5 |
A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the signal
of the timer is ignored so that the timer signal can be delivered once
the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small intervals
and keeps the system pointlessly out of low power states for no value.
This is a long standing non-trivial problem due to the lock order of
posix-timer lock and the sighand lock along with life time issues as
the timer and the sigqueue have different life time rules.
Cure this by:
* Embedding the sigqueue into the timer struct to have the same life
time rules. Aside of that this also avoids the lookup of the timer
in the signal delivery and rearm path as it's just a always valid
container_of() now.
* Queuing ignored timer signals onto a seperate ignored list.
* Moving queued timer signals onto the ignored list when the signal is
switched to SIG_IGN before it could be delivered.
* Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal delivery
code to rearm the timer.
This also required to consolidate the signal delivery rules so they are
consistent across all situations. With that all self test scenarios
finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time stamps
by default and switch to fine grained time stamps when inode attributes
are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that the
VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
* Move all sleep and timeout functions into one file
* Rework udelay() and ndelay() into proper documented inline functions
and replace the hardcoded magic numbers by proper defines.
* Rework the fsleep() implementation to take the reality of the timer
wheel granularity on different HZ values into account. Right now the
boundaries are hard coded time ranges which fail to provide the
requested accuracy on different HZ settings.
* Update documentation for all sleep/timeout related functions and fix
up stale documentation links all over the place
* Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as that's
the clock which drives the timekeeping adjustments via the various user
space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file descriptor
based posix clocks, but their usability is very limited. They can't be
accessed fast as they always go all the way out to the hardware and
they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the kernel
provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework converts
timekeeping and adjtimex(2) into generic functionality which operates
on pointers to data structures instead of using static variables.
This allows to provide time accessors and adjtimex(2) functionality for
the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less straight
forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the core
code and a few usage sites of the less frequently used interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is already
prepared and scheduled for the next merge window.
- Drivers:
* Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with other
clusters.
* Mostly boring cleanups, fixes, improvements and code movement
-----BEGIN PGP SIGNATURE-----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=2VC6
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
||
|
Linus Torvalds
|
0352387523 |
First step of consolidating the VDSO data page handling:
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various mechanisms
and fail to provide a clear separation of the functionalities.
Clean this up by:
* consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
* removing the last includes of header files which are pulling in other
headers outside of the VDSO namespace.
* seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every architecture
add support seperately.
-----BEGIN PGP SIGNATURE-----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=q5eD
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
||
|
Linus Torvalds
|
82339c4911 |
sanitize xattr and io_uring interactions with it,
add *xattrat() syscalls, sanitize struct filename handling in there. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> -----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdj4gAKCRBZ7Krx/gZQ 6/02AQC8ndn9i1wLGRb5DdZYGNWUDhXCdPrZCF2nyvU2swCIPwEAm1H5F/bxBXeT 6qCLHThVw4KTJOT2aDY03ELrxbi8Vg4= =35Oj -----END PGP SIGNATURE----- Merge tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull xattr updates from Al Viro: "Sanitize xattr and io_uring interactions with it, add *xattrat() syscalls, sanitize struct filename handling in there" * tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr: remove redundant check on variable err fs/xattr: add *at family syscalls new helpers: file_removexattr(), filename_removexattr() new helpers: file_listxattr(), filename_listxattr() replace do_getxattr() with saner helpers. replace do_setxattr() with saner helpers. new helper: import_xattr_name() fs: rename struct xattr_ctx to kernel_xattr_ctx xattr: switch to CLASS(fd) io_[gs]etxattr_prep(): just use getname() io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE getname_maybe_null() - the third variant of pathname copy-in teach filename_lookup() to treat NULL filename as "" |
||
|
Arnd Bergmann
|
a5371018ee |
powerpc/Makefile: Allow overriding CPP
Unlike all other arches, powerpc doesn't allow the user to override CPP, because it sets it unconditionally in the arch Makefile. This can lead to strange build failures. Instead add the required flags to KBUILD_CPPFLAGS, which are passed to CPP, CC and AS invocations by the generic Makefile logic. Reported-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/all/20240607061629.530301-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> [mpe: Rebase, write change log, add Arnd's SoB as communicated privately] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241107112646.32401-1-mpe@ellerman.id.au |
||
|
Thomas Weißschuh
|
d7a82238cb |
powerpc/vdso: Remove unused clockmode asm offsets
These offsets are not used anymore, delete them.
Fixes:
|
||
|
David Wang
|
5b881c1f83 |
powerpc/irq: use seq_put_decimal_ull_width() for decimal values
On a system with n CPUs and m interrupts, there will be n*m decimal values yielded via seq_printf(.."%10u "..) which is less efficient than seq_put_decimal_ull_width(), stress reading /proc/interrupts indicates ~30% performance improvement with this patch. Signed-off-by: David Wang <00107082@163.com> [mpe: Flesh out change log based on original submission] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/all/20241103080552.4787-1-00107082@163.com Link: https://patch.msgid.link/20241108162327.9887-1-00107082@163.com |
||
|
Gautam Menghani
|
44e5d21e6d |
powerpc/pseries: Fix KVM guest detection for disabling hardlockup detector
As per the kernel documentation[1], hardlockup detector should
be disabled in KVM guests as it may give false positives. On
PPC, hardlockup detector is enabled inside KVM guests because
disable_hardlockup_detector() is marked as early_initcall and it
relies on kvm_guest static key (is_kvm_guest()) which is initialized
later during boot by check_kvm_guest(), which is a core_initcall.
check_kvm_guest() is also called in pSeries_smp_probe(), which is called
before initcalls, but it is skipped if KVM guest does not have doorbell
support or if the guest is launched with SMT=1.
Call check_kvm_guest() in disable_hardlockup_detector() so that
is_kvm_guest() check goes through fine and hardlockup detector can be
disabled inside the KVM guest.
[1]: Documentation/admin-guide/sysctl/kernel.rst
Fixes:
|
||
|
Sourabh Jain
|
fb90dca828 |
fadump: reserve param area if below boot_mem_top
The param area is a memory region where the kernel places additional
command-line arguments for fadump kernel. Currently, the param memory
area is reserved in fadump kernel if it is above boot_mem_top. However,
it should be reserved if it is below boot_mem_top because the fadump
kernel already reserves memory from boot_mem_top to the end of DRAM.
Currently, there is no impact from not reserving param memory if it is
below boot_mem_top, as it is not used after the early boot phase of the
fadump kernel. However, if this changes in the future, it could lead to
issues in the fadump kernel.
Fixes:
|
||
|
Hari Bathini
|
f4892c68ec |
powerpc/fadump: allocate memory for additional parameters early
Memory for passing additional parameters to fadump capture kernel
is allocated during subsys_initcall level, using memblock. But
as slab is already available by this time, allocation happens via
the buddy allocator. This may work for radix MMU but is likely to
fail in most cases for hash MMU as hash MMU needs this memory in
the first memory block for it to be accessible in real mode in the
capture kernel (second boot). So, allocate memory for additional
parameters area as soon as MMU mode is obvious.
Fixes:
|
||
|
Mike Rapoport (Microsoft)
|
0c3beacf68 |
asm-generic: introduce text-patching.h
Several architectures support text patching, but they name the header files that declare patching functions differently. Make all such headers consistently named text-patching.h and add an empty header in asm-generic for architectures that do not support text patching. Link: https://lkml.kernel.org/r/20241023162711.2579610-4-rppt@kernel.org Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Luis Chamberlain <mcgrof@kernel.org> Tested-by: kdevops <kdevops@lists.linux.dev> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Brian Cain <bcain@quicinc.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Richard Weinberger <richard@nod.at> Cc: Russell King <linux@armlinux.org.uk> Cc: Song Liu <song@kernel.org> Cc: Stafford Horne <shorne@gmail.com> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uladzislau Rezki (Sony) <urezki@gmail.com> Cc: Vineet Gupta <vgupta@kernel.org> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christian Göttsche
|
6140be90ec |
fs/xattr: add *at family syscalls
Add the four syscalls setxattrat(), getxattrat(), listxattrat() and
removexattrat(). Those can be used to operate on extended attributes,
especially security related ones, either relative to a pinned directory
or on a file descriptor without read access, avoiding a
/proc/<pid>/fd/<fd> detour, requiring a mounted procfs.
One use case will be setfiles(8) setting SELinux file contexts
("security.selinux") without race conditions and without a file
descriptor opened with read access requiring SELinux read permission.
Use the do_{name}at() pattern from fs/open.c.
Pass the value of the extended attribute, its length, and for
setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added
struct xattr_args to not exceed six syscall arguments and not
merging the AT_* and XATTR_* flags.
[AV: fixes by Christian Brauner folded in, the entire thing rebased on
top of {filename,file}_...xattr() primitives, treatment of empty
pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling
is cheap, so f...(2) can use it]
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-alpha@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-ia64@vger.kernel.org
CC: linux-m68k@lists.linux-m68k.org
CC: linux-mips@vger.kernel.org
CC: linux-parisc@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
CC: linux-sh@vger.kernel.org
CC: sparclinux@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: audit@vger.kernel.org
CC: linux-arch@vger.kernel.org
CC: linux-api@vger.kernel.org
CC: linux-security-module@vger.kernel.org
CC: selinux@vger.kernel.org
[brauner: slight tweaks]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
||
|
Thorsten Blum
|
19e0a70e6c |
powerpc: Use str_enabled_disabled() helper function
Remove hard-coded strings by using the str_enabled_disabled() helper function. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241027222219.1173-2-thorsten.blum@linux.dev |
||
|
Nathan Chancellor
|
d677ce5213 |
powerpc/vdso: Drop -mstack-protector-guard flags in 32-bit files with clang
Under certain conditions, the 64-bit '-mstack-protector-guard' flags may end up in the 32-bit vDSO flags, resulting in build failures due to the structure of clang's argument parsing of the stack protector options, which validates the arguments of the stack protector guard flags unconditionally in the frontend, choking on the 64-bit values when targeting 32-bit: clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2 clang: error: invalid value 'r13' in 'mstack-protector-guard-reg=', expected one of: r2 make[3]: *** [arch/powerpc/kernel/vdso/Makefile:85: arch/powerpc/kernel/vdso/vgettimeofday-32.o] Error 1 make[3]: *** [arch/powerpc/kernel/vdso/Makefile:87: arch/powerpc/kernel/vdso/vgetrandom-32.o] Error 1 Remove these flags by adding them to the CC32FLAGSREMOVE variable, which already handles situations similar to this. Additionally, reformat and align a comment better for the expanding CONFIG_CC_IS_CLANG block. Cc: stable@vger.kernel.org # v6.1+ Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030-powerpc-vdso-drop-stackp-flags-clang-v1-1-d95e7376d29c@kernel.org |
||
|
Thomas Weißschuh
|
6142be7ed7 |
powerpc: Split systemcfg struct definitions out from vdso
The systemcfg data has nothing to do anymore with the vdso. Split it into a dedicated header file. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-27-b64f0842d512@linutronix.de |
||
|
Thomas Weißschuh
|
1184674d6e |
powerpc: Split systemcfg data out of vdso data page
The systemcfg data only has minimal overlap with the vdso data. Splitting the two avoids mapping the implementation-defined vdso data into /proc/ppc64/systemcfg. It is also a preparation for the standardization of vdso data storage. The only field actually used by both systemcfg and vdso is tb_ticks_per_sec and it is only changed once during time_init(). Initialize it in both structures there. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-26-b64f0842d512@linutronix.de |
||
|
Thomas Weißschuh
|
c22c06b4cc |
powerpc: Add kconfig option for the systemcfg page
The systemcfg page through procfs is only a backwards-compatible interface for very old applications. Make it possible to be disabled. This also creates a convenient config #define to guard any accesses to the systemcfg page. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-25-b64f0842d512@linutronix.de |
||
|
Thomas Weißschuh
|
d4526a2d2d |
powerpc/procfs: Propagate error of remap_pfn_range()
If the operation fails and userspace is unaware it will access unmapped memory, crashing the process. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-base-v1-22-b64f0842d512@linutronix.de |
||
|
Naveen N Rao
|
a52f6043a2 |
powerpc/ftrace: Add support for DYNAMIC_FTRACE_WITH_DIRECT_CALLS
Add support for DYNAMIC_FTRACE_WITH_DIRECT_CALLS similar to the arm64 implementation. ftrace direct calls allow custom trampolines to be called into directly from function ftrace call sites, bypassing the ftrace trampoline completely. This functionality is currently utilized by BPF trampolines to hook into kernel function entries. Since we have limited relative branch range, we support ftrace direct calls through support for DYNAMIC_FTRACE_WITH_CALL_OPS. In this approach, ftrace trampoline is not entirely bypassed. Rather, it is re-purposed into a stub that reads direct_call field from the associated ftrace_ops structure and branches into that, if it is not NULL. For this, it is sufficient if we can ensure that the ftrace trampoline is reachable from all traceable functions. When multiple ftrace_ops are associated with a call site, we utilize a call back to set pt_regs->orig_gpr3 that can then be tested on the return path from the ftrace trampoline to branch into the direct caller. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-16-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
e717754f0b |
powerpc/ftrace: Add support for DYNAMIC_FTRACE_WITH_CALL_OPS
Implement support for DYNAMIC_FTRACE_WITH_CALL_OPS similar to the arm64 implementation. This works by patching-in a pointer to an associated ftrace_ops structure before each traceable function. If multiple ftrace_ops are associated with a call site, then a special ftrace_list_ops is used to enable iterating over all the registered ftrace_ops. If no ftrace_ops are associated with a call site, then a special ftrace_nop_ops structure is used to render the ftrace call as a no-op. ftrace trampoline can then read the associated ftrace_ops for a call site by loading from an offset from the LR, and branch directly to the associated function. The primary advantage with this approach is that we don't have to iterate over all the registered ftrace_ops for call sites that have a single ftrace_ops registered. This is the equivalent of implementing support for dynamic ftrace trampolines, which set up a special ftrace trampoline for each registered ftrace_ops and have individual call sites branch into those directly. A secondary advantage is that this gives us a way to add support for direct ftrace callers without having to resort to using stubs. The address of the direct call trampoline can be loaded from the ftrace_ops structure. To support this, we reserve a nop before each function on 32-bit powerpc. For 64-bit powerpc, two nops are reserved before each out-of-line stub. During ftrace activation, we update this location with the associated ftrace_ops pointer. Then, on ftrace entry, we load from this location and call into ftrace_ops->func(). For 64-bit powerpc, we ensure that the out-of-line stub area is doubleword aligned so that ftrace_ops address can be updated atomically. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-15-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
cf9bc0efcc |
powerpc64/ftrace: Support .text larger than 32MB with out-of-line stubs
We are restricted to a .text size of ~32MB when using out-of-line function profile sequence. Allow this to be extended up to the previous limit of ~64MB by reserving space in the middle of .text. A new config option CONFIG_PPC_FTRACE_OUT_OF_LINE_NUM_RESERVE is introduced to specify the number of function stubs that are reserved in .text. On boot, ftrace utilizes stubs from this area first before using the stub area at the end of .text. A ppc64le defconfig has ~44k functions that can be traced. A more conservative value of 32k functions is chosen as the default value of PPC_FTRACE_OUT_OF_LINE_NUM_RESERVE so that we do not allot more space than necessary by default. If building a kernel that only has 32k trace-able functions, we won't allot any more space at the end of .text during the pass on vmlinux.o. Otherwise, only the remaining functions get space for stubs at the end of .text. This default value should help cover a .text size of ~48MB in total (including space reserved at the end of .text which can cover up to 32MB), which should be sufficient for most common builds. For a very small kernel build, this can be set to 0. Or, this can be bumped up to a larger value to support vmlinux .text size up to ~64MB. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-14-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
eec37961a5 |
powerpc64/ftrace: Move ftrace sequence out of line
Function profile sequence on powerpc includes two instructions at the beginning of each function: mflr r0 bl ftrace_caller The call to ftrace_caller() gets nop'ed out during kernel boot and is patched in when ftrace is enabled. Given the sequence, we cannot return from ftrace_caller with 'blr' as we need to keep LR and r0 intact. This results in link stack (return address predictor) imbalance when ftrace is enabled. To address that, we would like to use a three instruction sequence: mflr r0 bl ftrace_caller mtlr r0 Further more, to support DYNAMIC_FTRACE_WITH_CALL_OPS, we need to reserve two instruction slots before the function. This results in a total of five instruction slots to be reserved for ftrace use on each function that is traced. Move the function profile sequence out-of-line to minimize its impact. To do this, we reserve a single nop at function entry using -fpatchable-function-entry=1 and add a pass on vmlinux.o to determine the total number of functions that can be traced. This is then used to generate a .S file reserving the appropriate amount of space for use as ftrace stubs, which is built and linked into vmlinux. On bootup, the stub space is split into separate stubs per function and populated with the proper instruction sequence. A pointer to the associated stub is maintained in dyn_arch_ftrace. For modules, space for ftrace stubs is reserved from the generic module stub space. This is restricted to and enabled by default only on 64-bit powerpc, though there are some changes to accommodate 32-bit powerpc. This is done so that 32-bit powerpc could choose to opt into this based on further tests and benchmarks. As an example, after this patch, kernel functions will have a single nop at function entry: <kernel_clone>: addis r2,r12,467 addi r2,r2,-16028 nop mfocrf r11,8 ... When ftrace is enabled, the nop is converted to an unconditional branch to the stub associated with that function: <kernel_clone>: addis r2,r12,467 addi r2,r2,-16028 b ftrace_ool_stub_text_end+0x11b28 mfocrf r11,8 ... The associated stub: <ftrace_ool_stub_text_end+0x11b28>: mflr r0 bl ftrace_caller mtlr r0 b kernel_clone+0xc ... This change showed an improvement of ~10% in null_syscall benchmark on a Power 10 system with ftrace enabled. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Hari Bathini <hbathini@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-13-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
ed6144656b |
powerpc/ftrace: Move ftrace stub used for init text before _einittext
Move the ftrace stub used to cover inittext before _einittext so that it is within kernel text, as seen through core_kernel_text(). This is required for a subsequent change to ftrace. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-9-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
1d59bd2fc0 |
powerpc/ftrace: Skip instruction patching if the instructions are the same
To simplify upcoming changes to ftrace, add a check to skip actual instruction patching if the old and new instructions are the same. We still validate that the instruction is what we expect, but don't actually patch the same instruction again. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-8-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
8b0dc1305e |
powerpc/ftrace: Remove pointer to struct module from dyn_arch_ftrace
Pointer to struct module is only relevant for ftrace records belonging to kernel modules. Having this field in dyn_arch_ftrace wastes memory for all ftrace records belonging to the kernel. Remove the same in favour of looking up the module from the ftrace record address, similar to other architectures. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-7-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
c12cfe9dee |
powerpc/module_64: Convert #ifdef to IS_ENABLED()
Minor refactor for converting #ifdef to IS_ENABLED(). Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-6-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
654b3fa61b |
powerpc32/ftrace: Unify 32-bit and 64-bit ftrace entry code
On 32-bit powerpc, gcc generates a three instruction sequence for function profiling: mflr r0 stw r0, 4(r1) bl _mcount On kernel boot, the call to _mcount() is nop-ed out, to be patched back in when ftrace is actually enabled. The 'stw' instruction therefore is not necessary unless ftrace is enabled. Nop it out during ftrace init. When ftrace is enabled, we want the 'stw' so that stack unwinding works properly. Perform the same within the ftrace handler, similar to 64-bit powerpc. Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-5-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
161d62c2b0 |
powerpc64/ftrace: Nop out additional 'std' instruction emitted by gcc v5.x
Gcc v5.x emits a 3-instruction sequence for -mprofile-kernel: mflr r0 std r0, 16(r1) bl _mcount Gcc v6.x moved to a simpler 2-instruction sequence by removing the 'std' instruction. The store saved the return address in the LR save area in the caller stack frame for stack unwinding. However, with dynamic ftrace, we no longer have a call to _mcount on kernel boot when ftrace is not enabled. When ftrace is enabled, that store is performed within ftrace_caller(). As such, the additional 'std' instruction is redundant. Nop it out on kernel boot. With this change, we now use the same 2-instruction profiling sequence with both -mprofile-kernel, as well as -fpatchable-function-entry on 64-bit powerpc. Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-4-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
be87d713ea |
powerpc/kprobes: Use ftrace to determine if a probe is at function entry
Rather than hard-coding the offset into a function to be used to determine if a kprobe is at function entry, use ftrace_location() to determine the ftrace location within the function and categorize all instructions till that offset to be function entry. For functions that cannot be traced, we fall back to using a fixed offset of 8 (two instructions) to categorize a probe as being at function entry for 64-bit elfv2, unless we are using pcrel. Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-3-hbathini@linux.ibm.com |
||
|
Naveen N Rao
|
0b9846529e |
powerpc/trace: Account for -fpatchable-function-entry support by toolchain
So far, we have relied on the fact that gcc supports both -mprofile-kernel, as well as -fpatchable-function-entry, and clang supports neither. Our Makefile only checks for CONFIG_MPROFILE_KERNEL to decide which files to build. Clang has a feature request out [*] to implement -fpatchable-function-entry, and is unlikely to support -mprofile-kernel. Update our Makefile checks so that we pick up the correct files to build once clang picks up support for -fpatchable-function-entry. [*] https://github.com/llvm/llvm-project/issues/57031 Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241030070850.1361304-2-hbathini@linux.ibm.com |
||
|
Usama Arif
|
b2473a3597 |
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
__pa() is only intended to be used for linear map addresses and using
it for initial_boot_params which is in fixmap for arm64 will give an
incorrect value. Hence save the physical address when it is known at
boot time when calling early_init_dt_scan for arm64 and use it at kexec
time instead of converting the virtual address using __pa().
Note that arm64 doesn't need the FDT region reserved in the DT as the
kernel explicitly reserves the passed in FDT. Therefore, only a debug
warning is fixed with this change.
Reported-by: Breno Leitao <leitao@debian.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Fixes:
|
||
|
Michael Ellerman
|
62f8f307c8 |
powerpc/64: Remove maple platform
The maple platform was added in 2004 [1], to support the "Maple" 970FX evaluation board. It was later used for IBM JS20/JS21 machines, as well as the Bimini machine, aka "Yellow Dog Powerstation". Sadly all those machines have passed into memory, and there's been no evidence for years that anyone is still using any of them. Remove the platform and related code. It can always be reinstated if there's interest. Note that this has no impact on support for 970FX based Power Macs. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux-fullhistory.git/commit/?id=f0d068d65c5e555ffcfbc189de32598f6f00770c Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241013102957.548291-1-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
b23b9edf64 |
powerpc/machdep: Drop include of dma-mapping.h
Drop the include of dma-mapping.h in machdep.h, replace it with forward declarations of struct device and struct pci_dev, and include time64.h and page.h which are required for time64_t and pgprot_t respectively. Add direct includes of some other headers to some files that were getting them via machdep.h. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/20241009051826.132805-2-mpe@ellerman.id.au |
||
|
Michael Ellerman
|
5e296fc37e |
powerpc/64: Drop IPI_PRIORITY from asm-offsets
The last use of IPI_PRIORITY in asm was removed in commit
|
||
|
Ritesh Harjani (IBM)
|
05b94cae1c |
powerpc/fadump: Move fadump_cma_init to setup_arch() after initmem_init()
During early init CMA_MIN_ALIGNMENT_BYTES can be PAGE_SIZE,
since pageblock_order is still zero and it gets initialized
later during initmem_init() e.g.
setup_arch() -> initmem_init() -> sparse_init() -> set_pageblock_order()
One such use case where this causes issue is -
early_setup() -> early_init_devtree() -> fadump_reserve_mem() -> fadump_cma_init()
This causes CMA memory alignment check to be bypassed in
cma_init_reserved_mem(). Then later cma_activate_area() can hit
a VM_BUG_ON_PAGE(pfn & ((1 << order) - 1)) if the reserved memory
area was not pageblock_order aligned.
Fix it by moving the fadump_cma_init() after initmem_init(),
where other such cma reservations also gets called.
<stack trace>
==============
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10010
flags: 0x13ffff800000000(node=1|zone=0|lastcpupid=0x7ffff) CMA
raw: 013ffff800000000 5deadbeef0000100 5deadbeef0000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(pfn & ((1 << order) - 1))
------------[ cut here ]------------
kernel BUG at mm/page_alloc.c:778!
Call Trace:
__free_one_page+0x57c/0x7b0 (unreliable)
free_pcppages_bulk+0x1a8/0x2c8
free_unref_page_commit+0x3d4/0x4e4
free_unref_page+0x458/0x6d0
init_cma_reserved_pageblock+0x114/0x198
cma_init_reserved_areas+0x270/0x3e0
do_one_initcall+0x80/0x2f8
kernel_init_freeable+0x33c/0x530
kernel_init+0x34/0x26c
ret_from_kernel_user_thread+0x14/0x1c
Fixes:
|
||
|
Ritesh Harjani (IBM)
|
6faeac507b |
powerpc/fadump: Reserve page-aligned boot_memory_size during fadump_reserve_mem
This patch refactors all CMA related initialization and alignment code to within fadump_cma_init() which gets called in the end. This also means that we keep [reserve_dump_area_start, boot_memory_size] page aligned during fadump_reserve_mem(). Then later in fadump_cma_init() we extract the aligned chunk and provide it to CMA. This inherently also fixes an issue in the current code where the reserve_dump_area_start is not aligned when the physical memory can have holes and the suitable chunk starts at an unaligned boundary. After this we should be able to call fadump_cma_init() independently later in setup_arch() where pageblock_order is non-zero. Suggested-by: Sourabh Jain <sourabhjain@linux.ibm.com> Acked-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/805d6b900968fb9402ad8f4e4775597db42085c4.1729146153.git.ritesh.list@gmail.com |
||
|
Ritesh Harjani (IBM)
|
adfaec30ff |
powerpc/fadump: Refactor and prepare fadump_cma_init for late init
We anyway don't use any return values from fadump_cma_init(). Since fadump_reserve_mem() from where fadump_cma_init() gets called today, already has the required checks. This patch makes this function return type as void. Let's also handle extra cases like return if fadump_supported is false or dump_active, so that in later patches we can call fadump_cma_init() separately from setup_arch(). Acked-by: Hari Bathini <hbathini@linux.ibm.com> Reviewed-by: Madhavan Srinivasan <maddy@linux.ibm.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/a2afc3d6481a87a305e89cfc4a3f3d2a0b8ceab3.1729146153.git.ritesh.list@gmail.com |
||
|
Christophe Leroy
|
4e3fa1aecb |
powerpc/vdso: Implement __arch_get_vdso_rng_data()
VDSO time functions do not call any other function, so they don't need to save/restore LR. However, retrieving the address of VDSO data page requires using LR hence saving then restoring it, which can be heavy on some CPUs. On the other hand, VDSO functions on powerpc are not standard functions and require a wrapper function to call C VDSO functions. And that wrapper has to save and restore LR in order to call the C VDSO function, so retrieving VDSO data page address in that wrapper doesn't require additional save/restore of LR. For random VDSO functions it is a bit different. Because the function calls __arch_chacha20_blocks_nostack(), it saves and restores LR. Retrieving VDSO data page address can then be done there without additional save/restore of LR. So lets implement __arch_get_vdso_rng_data() and simplify the wrapper. It starts paving the way for the day powerpc will implement a more standard ABI for VDSO functions. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/a1a9bd0df508f1b5c04684b7366940577dfc6262.1727858295.git.christophe.leroy@csgroup.eu |
||
|
Christophe Leroy
|
c39b1dcf05 |
powerpc/vdso: Add a page for non-time data
The page containing VDSO time data is swapped with the one containing TIME namespace data when a process uses a non-root time namespace. For other data like powerpc specific data and RNG data, it means tracking whether time namespace is the root one or not to know which page to use. Simplify the logic behind by moving time data out of first data page so that the first data page which contains everything else always remains the first page. Time data is in the second or third page depending on selected time namespace. While we are playing with get_datapage macro, directly take into account the data offset inside the macro instead of adding that offset afterwards. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://patch.msgid.link/0557d3ec898c1d0ea2fc59fa8757618e524c5d94.1727858295.git.christophe.leroy@csgroup.eu |
||
|
Anna-Maria Behnsen
|
b7f0eb8c9b |
powerpc/rtas: Use fsleep() to minimize additional sleep duration
When commit
|
||
|
Thomas Weißschuh
|
d93948d3ce |
powerpc/vdso: Remove timekeeper includes
Since the generic VDSO clock mode storage is used, this header file is unused and can be removed. This avoids including a non-VDSO header while building the VDSO, which can lead to compilation errors. Also drop the comment which is out of date and in the wrong place. Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241010-vdso-generic-arch_update_vsyscall-v1-4-7fe5a3ea4382@linutronix.de |
||
|
Christophe Leroy
|
8956c582ac |
powerpc/8xx: Fix kernel DTLB miss on dcbz
Following OOPS is encountered while loading test_bpf module on powerpc 8xx: [ 218.835567] BUG: Unable to handle kernel data access on write at 0xcb000000 [ 218.842473] Faulting instruction address: 0xc0017a80 [ 218.847451] Oops: Kernel access of bad area, sig: 11 [#1] [ 218.852854] BE PAGE_SIZE=16K PREEMPT CMPC885 [ 218.857207] SAF3000 DIE NOTIFICATION [ 218.860713] Modules linked in: test_bpf(+) test_module [ 218.865867] CPU: 0 UID: 0 PID: 527 Comm: insmod Not tainted 6.11.0-s3k-dev-09856-g3de3d71ae2e6-dirty #1280 [ 218.875546] Hardware name: MIAE 8xx 0x500000 CMPC885 [ 218.880521] NIP: c0017a80 LR: |
||
|
Steven Rostedt
|
7888af4166 |
ftrace: Make ftrace_regs abstract from direct use
ftrace_regs was created to hold registers that store information to save function parameters, return value and stack. Since it is a subset of pt_regs, it should only be used by its accessor functions. But because pt_regs can easily be taken from ftrace_regs (on most archs), it is tempting to use it directly. But when running on other architectures, it may fail to build or worse, build but crash the kernel! Instead, make struct ftrace_regs an empty structure and have the architectures define __arch_ftrace_regs and all the accessor functions will typecast to it to get to the actual fields. This will help avoid usage of ftrace_regs directly. Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/ Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org> Cc: "x86@kernel.org" <x86@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Naveen N Rao <naveen@kernel.org> Cc: Madhavan Srinivasan <maddy@linux.ibm.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390 Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
|
Jason A. Donenfeld
|
4b058c9f28 |
powerpc/vdso: allow r30 in vDSO code generation of getrandom
For gettimeofday, -ffixed-r30 was passed to work around a bug in Go
code, where the vDSO trampoline forgot to save and restore this register
across function calls. But Go requires a different trampoline for every
call, and there's no reason that new Go code needs to be broken and add
more bugs. So remove -ffixed-r30 for getrandom.
Fixes:
|
||
|
Linus Torvalds
|
4ffc458083 |
powerpc fixes for 6.12 #2
- Fix build error in vdso32 when building 64-bit with COMPAT=y and -Os. - Fix build error in pseries EEH when CONFIG_DEBUG_FS is not set. Thanks to: Christophe Leroy, Narayana Murty N, Christian Zigotzky, Ritesh Harjani. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZvPfwQAKCRAF0oADX8se IeqKAPkBZJBXheDywa0aZ1hIKfwB2mWeAMgZLb1AhWeAGpJMBAEA9LtZbM4KhQHG r2JCuHtV7rDyTG04+97V/K4M2iQSsgg= =cygk -----END PGP SIGNATURE----- Merge tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix build error in vdso32 when building 64-bit with COMPAT=y and -Os - Fix build error in pseries EEH when CONFIG_DEBUG_FS is not set Thanks to Christophe Leroy, Narayana Murty N, Christian Zigotzky, and Ritesh Harjani. * tag 'powerpc-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/pseries/eeh: move pseries_eeh_err_inject() outside CONFIG_DEBUG_FS block powerpc/vdso32: Fix use of crtsavres for PPC64 |
||
|
Linus Torvalds
|
617a814f14 |
ALong with the usual shower of singleton patches, notable patch series in
this pull request are:
"Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
"Some cleanups for shmem" from Baolin Wang. No functional changes - mode
code reuse, better function naming, logic simplifications.
"mm: some small page fault cleanups" from Josef Bacik. No functional
changes - code cleanups only.
"Various memory tiering fixes" from Zi Yan. A small fix and a little
cleanup.
"mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
"Kernel stack usage histogram" from Pasha Tatashin and Shakeel Butt. This
is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at all
used 16k. Useful for some system tuning things, but partivularly useful
for "the dynamic kernel stack project".
"kmemleak: support for percpu memory leak detect" from Pavel Tikhomirov.
Teaches kmemleak to detect leaksage of percpu memory.
"mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
"mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from David
Hildenbrand. Improves PTE/PMD splitlock detection, makes powerpc/8xx work
correctly by design rather than by accident.
"mm: remove arch_make_page_accessible()" from David Hildenbrand. Some
folio conversions which make arch_make_page_accessible() unneeded.
"mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David Finkel.
Cleans up and fixes our handling of the resetting of the cgroup/process
peak-memory-use detector.
"Make core VMA operations internal and testable" from Lorenzo Stoakes.
Rationalizaion and encapsulation of the VMA manipulation APIs. With a
view to better enable testing of the VMA functions, even from a
userspace-only harness.
"mm: zswap: fixes for global shrinker" from Takero Funaki. Fix issues in
the zswap global shrinker, resulting in improved performance.
"mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill in
some missing info in /proc/zoneinfo.
"mm: replace follow_page() by folio_walk" from David Hildenbrand. Code
cleanups and rationalizations (conversion to folio_walk()) resulting in
the removal of follow_page().
"improving dynamic zswap shrinker protection scheme" from Nhat Pham. Some
tuning to improve zswap's dynamic shrinker. Significant reductions in
swapin and improvements in performance are shown.
"mm: Fix several issues with unaccepted memory" from Kirill Shutemov.
Improvements to the new unaccepted memory feature,
"mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on DAX
PUDs. This was missing, although nobody seems to have notied yet.
"Introduce a store type enum for the Maple tree" from Sidhartha Kumar.
Cleanups and modest performance improvements for the maple tree library
code.
"memcg: further decouple v1 code from v2" from Shakeel Butt. Move more
cgroup v1 remnants away from the v2 memcg code.
"memcg: initiate deprecation of v1 features" from Shakeel Butt. Adds
various warnings telling users that memcg v1 features are deprecated.
"mm: swap: mTHP swap allocator base on swap cluster order" from Chris Li.
Greatly improves the success rate of the mTHP swap allocation.
"mm: introduce numa_memblks" from Mike Rapoport. Moves various disparate
per-arch implementations of numa_memblk code into generic code.
"mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
"support large folio swap-out and swap-in for shmem" from Baolin Wang.
With this series we no longer split shmem large folios into simgle-page
folios when swapping out shmem.
"mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice performance
improvements and code reductions for gigantic folios.
"support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
"mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
"Increase the number of bits available in page_type" from Matthew Wilcox.
Increases the number of bits available in page_type!
"Simplify the page flags a little" from Matthew Wilcox. Many legacy page
flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
"mm: store zero pages to be swapped out in a bitmap" from Usama Arif. An
optimization which permits us to avoid writing/reading zero-filled zswap
pages to backing store.
"Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race window
which occurs when a MAP_FIXED operqtion is occurring during an unrelated
vma tree walk.
"mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of the
vma_merge() functionality, making ot cleaner, more testable and better
tested.
"misc fixups for DAMON {self,kunit} tests" from SeongJae Park. Minor
fixups of DAMON selftests and kunit tests.
"mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang. Code
cleanups and folio conversions.
"Shmem mTHP controls and stats improvements" from Ryan Roberts. Cleanups
for shmem controls and stats.
"mm: count the number of anonymous THPs per size" from Barry Song. Expose
additional anon THP stats to userspace for improved tuning.
"mm: finish isolate/putback_lru_page()" from Kefeng Wang: more folio
conversions and removal of now-unused page-based APIs.
"replace per-quota region priorities histogram buffer with per-context
one" from SeongJae Park. DAMON histogram rationalization.
"Docs/damon: update GitHub repo URLs and maintainer-profile" from SeongJae
Park. DAMON documentation updates.
"mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and improve
related doc and warn" from Jason Wang: fixes usage of page allocator
__GFP_NOFAIL and GFP_ATOMIC flags.
"mm: split underused THPs" from Yu Zhao. Improve THP=always policy - this
was overprovisioning THPs in sparsely accessed memory areas.
"zram: introduce custom comp backends API" frm Sergey Senozhatsky. Add
support for zram run-time compression algorithm tuning.
"mm: Care about shadow stack guard gap when getting an unmapped area" from
Mark Brown. Fix up the various arch_get_unmapped_area() implementations
to better respect guard areas.
"Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability of
mem_cgroup_iter() and various code cleanups.
"mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
"resource: Fix region_intersects() vs add_memory_driver_managed()" from
Huang Ying. Fix a bug in region_intersects() for systems with CXL memory.
"mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches a
couple more code paths to correctly recover from the encountering of
poisoned memry.
"mm: enable large folios swap-in support" from Barry Song. Support the
swapin of mTHP memory into appropriately-sized folios, rather than into
single-page folios.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZu1BBwAKCRDdBJ7gKXxA
jlWNAQDYlqQLun7bgsAN4sSvi27VUuWv1q70jlMXTfmjJAvQqwD/fBFVR6IOOiw7
AkDbKWP2k0hWPiNJBGwoqxdHHx09Xgo=
=s0T+
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
|
||
|
Narayana Murty N
|
3af2e2f68c |
powerpc/pseries/eeh: move pseries_eeh_err_inject() outside CONFIG_DEBUG_FS block
Makes pseries_eeh_err_inject() available even when debugfs
is disabled (CONFIG_DEBUG_FS=n). It moves eeh_debugfs_break_device()
and eeh_pe_inject_mmio_error() out of the CONFIG_DEBUG_FS block
and renames it as eeh_break_device().
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409170509.VWC6jadC-lkp@intel.com/
Fixes:
|
||
|
Linus Torvalds
|
de848da12f |
drm next for 6.12-rc1
string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler; - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: add support for BOE NE140WUM-N6G; revert support for SDC ATNA45AF01 - visionox-vtdr6130: improve error handling; use devm_regulator_bulk_get_const() - boe-th101mb31ig002: Support for starry-er88577 MIPI-DSI panel plus DT; Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: Support Melfas lmfbx101117480 MIPI-DSI panel plus DT; Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: support Innolux G070ACE-LH3 plus DT bindings support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: decouple DSI and DRM code add SPI support support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: Support RGB display on Rockchip RK3066; Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: Fix transparency after disabling plane; Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmbq43gACgkQDHTzWXnE hr4+lg/+O/r41E7ioitcM0DWeWem0dTlvQr41pJ8jujHvw+bXNdg0BMGWtsTyTLA eOft2AwofsFjg+O7l8IFXOT37mQLdIdfjb3+w5brI198InL3OWC3QV8ZSwY9VGET n8crO9jFoxNmHZnFniBZbtI6egTyl6H+2ey3E0MTnKiPUKZQvsK/4+x532yVLPob UUOze5wcjyGZc7LJEIZPohPVneCb9ki7sabDQqh4cxIQ0Eg+nqPpWjYM4XVd+lTS 8QmssbR49LrJ7z9m90qVE+8TjYUCn+ChDPMs61KZAAnc8k++nK41btjGZ23mDKPb YEguahCYthWJ4U8K18iXBPnLPxZv5+harQ8OIWAUYqdIOWSXHozvuJ2Z84eHV13a 9mQ5vIymXang8G1nEXwX/vml9uhVhBCeWu3qfdse2jfaTWYUb1YzhqUoFvqI0R0K 8wT03MyNdx965CSqAhpH5Jd559ueZmpd+jsHOfhAS+1gxfD6NgoPXv7lpnMUmGWX SnaeC9RLD4cgy7j2Swo7TEqQHrvK5XhZSwX94kU6RPmFE5RRKqWgFVQmwuikDMId UpNqDnPT5NL2UX4TNG4V4coyTXvKgVcSB9TA7j8NSLfwdGHhiz73pkYosaZXKyxe u6qKMwMONfZiT20nhD7RhH0AFnnKosAcO14dhn0TKFZPY6Ce9O8= =7jR+ -----END PGP SIGNATURE----- Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "This adds a couple of patches outside the drm core, all should be acked appropriately, the string and pstore ones are the main ones that come to mind. Otherwise it's the usual drivers, xe is getting enabled by default on some new hardware, we've changed the device number handling to allow more devices, and we added some optional rust code to create QR codes in the panic handler, an idea first suggested I think 10 years ago :-) string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler: - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: - add support for BOE NE140WUM-N6G - revert support for SDC ATNA45AF01 - visionox-vtdr6130: - improve error handling - use devm_regulator_bulk_get_const() - boe-th101mb31ig002: - Support for starry-er88577 MIPI-DSI panel plus DT - Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT - Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: - support Innolux G070ACE-LH3 plus DT bindings - support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: - decouple DSI and DRM code - add SPI support - support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: - Support RGB display on Rockchip RK3066 - Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: - Fix transparency after disabling plane - Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset" * tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits) drm/xe: Fix missing conversion to xe_display_pm_runtime_resume drm/xe/xe2hpg: Add Wa_15016589081 drm/xe: Don't keep stale pointer to bo->ggtt_node drm/xe: fix missing 'xe_vm_put' drm/xe: fix build warning with CONFIG_PM=n drm/xe: Suppress missing outer rpm protection warning drm/xe: prevent potential UAF in pf_provision_vf_ggtt() drm/amd/display: Add all planes on CRTC to state for overlay cursor drm/i915/bios: fix printk format width drm/i915/display: Fix BMG CCS modifiers drm/amdgpu: get rid of bogus includes of fdtable.h drm/amdkfd: CRIU fixes drm/amdgpu: fix a race in kfd_mem_export_dmabuf() drm: new helper: drm_gem_prime_handle_to_dmabuf() drm/amdgpu/atomfirmware: Silence UBSAN warning drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare' drm/amd/amdgpu: apply command submission parser for JPEG v1 drm/amd/amdgpu: apply command submission parser for JPEG v2+ drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3 drm/amd/pm: update the features set on smu v14.0.2/3 ... |
||
|
Linus Torvalds
|
3a7101e9b2 |
powerpc updates for 6.12
- Reduce alignment constraints on STRICT_KERNEL_RWX and speed-up TLB misses on
8xx and 603.
- Replace kretprobe code with rethook and enable fprobe.
- Remove the "fast endian switch" syscall.
- Handle DLPAR device tree updates in kernel, allowing the deprecation of the
binary /proc/powerpc/ofdt interface.
Thanks to: Abhishek Dubey, Alex Shi, Benjamin Gray, Christophe Leroy, Gaosheng
Cui, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari Bathini, Huang
Xiaojia, Jinjie Ruan, Madhavan Srinivasan, Miguel Ojeda, Mina Almasry, Narayana
Murty N, Naveen Rao, Rob Herring (Arm), Scott Cheloha, Segher Boessenkool,
Stephen Rothwell, Thomas Zimmermann, Uwe Kleine-König, Vaibhav Jain, Zhang
Zekun.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRjvi15rv0TSTaE+SIF0oADX8seIQUCZurC9gAKCRAF0oADX8se
IWunAPkBK70cSZgldH9gJL7C0aqRX+j6qBbvzmoz0E0UlxiRKQD/eW4yDxJBsS9Q
KPS9e50duoeU+gKQYuSWkKpH/i4uXAU=
=Q107
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Reduce alignment constraints on STRICT_KERNEL_RWX and speed-up TLB
misses on 8xx and 603
- Replace kretprobe code with rethook and enable fprobe
- Remove the "fast endian switch" syscall
- Handle DLPAR device tree updates in kernel, allowing the deprecation
of the binary /proc/powerpc/ofdt interface
Thanks to Abhishek Dubey, Alex Shi, Benjamin Gray, Christophe Leroy,
Gaosheng Cui, Gautam Menghani, Geert Uytterhoeven, Haren Myneni, Hari
Bathini, Huang Xiaojia, Jinjie Ruan, Madhavan Srinivasan, Miguel Ojeda,
Mina Almasry, Narayana Murty N, Naveen Rao, Rob Herring (Arm), Scott
Cheloha, Segher Boessenkool, Stephen Rothwell, Thomas Zimmermann, Uwe
Kleine-König, Vaibhav Jain, and Zhang Zekun.
* tag 'powerpc-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (59 commits)
powerpc/atomic: Use YZ constraints for DS-form instructions
MAINTAINERS: powerpc: Add Maddy
powerpc: Switch back to struct platform_driver::remove()
powerpc/pseries/eeh: Fix pseries_eeh_err_inject
selftests/powerpc: Allow building without static libc
macintosh/via-pmu: register_pmu_pm_ops() can be __init
powerpc: Stop using no_llseek
powerpc/64s: Remove the "fast endian switch" syscall
powerpc/mm/64s: Restrict THP to Radix or HPT w/64K pages
powerpc/mm/64s: Move THP reqs into a separate symbol
powerpc/64s: Make mmu_hash_ops __ro_after_init
powerpc: Replace kretprobe code with rethook on powerpc
powerpc: pseries: Constify struct kobj_type
powerpc: powernv: Constify struct kobj_type
powerpc: Constify struct kobj_type
powerpc/pseries/dlpar: Add device tree nodes for DLPAR IO add
powerpc/pseries/dlpar: Remove device tree node for DLPAR IO remove
powerpc/pseries: Use correct data types from pseries_hp_errorlog struct
powerpc/vdso: Inconditionally use CFUNC macro
powerpc/32: Implement validation of emergency stack
...
|