The generic storage implementation provides the same features as the
custom one. However it can be shared between architectures, making
maintenance easier.
Co-developed-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/all/20250204-vdso-store-rng-v3-14-13a4669dfc8c@linutronix.de
Add support for DYNAMIC_FTRACE_WITH_DIRECT_CALLS similar to the arm64
implementation.
ftrace direct calls allow custom trampolines to be called into directly
from function ftrace call sites, bypassing the ftrace trampoline
completely. This functionality is currently utilized by BPF trampolines
to hook into kernel function entries.
Since we have limited relative branch range, we support ftrace direct
calls through support for DYNAMIC_FTRACE_WITH_CALL_OPS. In this
approach, ftrace trampoline is not entirely bypassed. Rather, it is
re-purposed into a stub that reads direct_call field from the associated
ftrace_ops structure and branches into that, if it is not NULL. For
this, it is sufficient if we can ensure that the ftrace trampoline is
reachable from all traceable functions.
When multiple ftrace_ops are associated with a call site, we utilize a
call back to set pt_regs->orig_gpr3 that can then be tested on the
return path from the ftrace trampoline to branch into the direct caller.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-16-hbathini@linux.ibm.com
Implement support for DYNAMIC_FTRACE_WITH_CALL_OPS similar to the
arm64 implementation.
This works by patching-in a pointer to an associated ftrace_ops
structure before each traceable function. If multiple ftrace_ops are
associated with a call site, then a special ftrace_list_ops is used to
enable iterating over all the registered ftrace_ops. If no ftrace_ops
are associated with a call site, then a special ftrace_nop_ops structure
is used to render the ftrace call as a no-op. ftrace trampoline can then
read the associated ftrace_ops for a call site by loading from an offset
from the LR, and branch directly to the associated function.
The primary advantage with this approach is that we don't have to
iterate over all the registered ftrace_ops for call sites that have a
single ftrace_ops registered. This is the equivalent of implementing
support for dynamic ftrace trampolines, which set up a special ftrace
trampoline for each registered ftrace_ops and have individual call sites
branch into those directly.
A secondary advantage is that this gives us a way to add support for
direct ftrace callers without having to resort to using stubs. The
address of the direct call trampoline can be loaded from the ftrace_ops
structure.
To support this, we reserve a nop before each function on 32-bit
powerpc. For 64-bit powerpc, two nops are reserved before each
out-of-line stub. During ftrace activation, we update this location with
the associated ftrace_ops pointer. Then, on ftrace entry, we load from
this location and call into ftrace_ops->func().
For 64-bit powerpc, we ensure that the out-of-line stub area is
doubleword aligned so that ftrace_ops address can be updated atomically.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-15-hbathini@linux.ibm.com
Function profile sequence on powerpc includes two instructions at the
beginning of each function:
mflr r0
bl ftrace_caller
The call to ftrace_caller() gets nop'ed out during kernel boot and is
patched in when ftrace is enabled.
Given the sequence, we cannot return from ftrace_caller with 'blr' as we
need to keep LR and r0 intact. This results in link stack (return
address predictor) imbalance when ftrace is enabled. To address that, we
would like to use a three instruction sequence:
mflr r0
bl ftrace_caller
mtlr r0
Further more, to support DYNAMIC_FTRACE_WITH_CALL_OPS, we need to
reserve two instruction slots before the function. This results in a
total of five instruction slots to be reserved for ftrace use on each
function that is traced.
Move the function profile sequence out-of-line to minimize its impact.
To do this, we reserve a single nop at function entry using
-fpatchable-function-entry=1 and add a pass on vmlinux.o to determine
the total number of functions that can be traced. This is then used to
generate a .S file reserving the appropriate amount of space for use as
ftrace stubs, which is built and linked into vmlinux.
On bootup, the stub space is split into separate stubs per function and
populated with the proper instruction sequence. A pointer to the
associated stub is maintained in dyn_arch_ftrace.
For modules, space for ftrace stubs is reserved from the generic module
stub space.
This is restricted to and enabled by default only on 64-bit powerpc,
though there are some changes to accommodate 32-bit powerpc. This is
done so that 32-bit powerpc could choose to opt into this based on
further tests and benchmarks.
As an example, after this patch, kernel functions will have a single nop
at function entry:
<kernel_clone>:
addis r2,r12,467
addi r2,r2,-16028
nop
mfocrf r11,8
...
When ftrace is enabled, the nop is converted to an unconditional branch
to the stub associated with that function:
<kernel_clone>:
addis r2,r12,467
addi r2,r2,-16028
b ftrace_ool_stub_text_end+0x11b28
mfocrf r11,8
...
The associated stub:
<ftrace_ool_stub_text_end+0x11b28>:
mflr r0
bl ftrace_caller
mtlr r0
b kernel_clone+0xc
...
This change showed an improvement of ~10% in null_syscall benchmark on a
Power 10 system with ftrace enabled.
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/20241030070850.1361304-13-hbathini@linux.ibm.com
VDSO time functions do not call any other function, so they don't
need to save/restore LR. However, retrieving the address of VDSO data
page requires using LR hence saving then restoring it, which can be
heavy on some CPUs. On the other hand, VDSO functions on powerpc are
not standard functions and require a wrapper function to call C VDSO
functions. And that wrapper has to save and restore LR in order to
call the C VDSO function, so retrieving VDSO data page address in that
wrapper doesn't require additional save/restore of LR.
For random VDSO functions it is a bit different. Because the function
calls __arch_chacha20_blocks_nostack(), it saves and restores LR.
Retrieving VDSO data page address can then be done there without
additional save/restore of LR.
So lets implement __arch_get_vdso_rng_data() and simplify the wrapper.
It starts paving the way for the day powerpc will implement a more
standard ABI for VDSO functions.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://patch.msgid.link/a1a9bd0df508f1b5c04684b7366940577dfc6262.1727858295.git.christophe.leroy@csgroup.eu
To be consistent with other VDSO functions, the function is called
__kernel_getrandom()
__arch_chacha20_blocks_nostack() fonction is implemented basically
with 32 bits operations. It performs 4 QUARTERROUND operations in
parallele. There are enough registers to avoid using the stack:
On input:
r3: output bytes
r4: 32-byte key input
r5: 8-byte counter input/output
r6: number of 64-byte blocks to write to output
During operation:
stack: pointer to counter (r5) and non-volatile registers (r14-131)
r0: counter of blocks (initialised with r6)
r4: Value '4' after key has been read, used for indexing
r5-r12: key
r14-r15: block counter
r16-r31: chacha state
At the end:
r0, r6-r12: Zeroised
r5, r14-r31: Restored
Performance on powerpc 885 (using kernel selftest):
~# ./vdso_test_getrandom bench-single
vdso: 25000000 times in 62.938002291 seconds
libc: 25000000 times in 535.581916866 seconds
syscall: 25000000 times in 531.525042806 seconds
Performance on powerpc 8321 (using kernel selftest):
~# ./vdso_test_getrandom bench-single
vdso: 25000000 times in 16.899318858 seconds
libc: 25000000 times in 131.050596522 seconds
syscall: 25000000 times in 129.794790389 seconds
This first patch adds support for VDSO32. As selftests cannot easily
be generated only for VDSO32, and because the following patch brings
support for VDSO64 anyway, this patch opts out all code in
__arch_chacha20_blocks_nostack() so that vdso_test_chacha will not
fail to compile and will not crash on PPC64/PPC64LE, allthough the
selftest itself will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When running in a non-root time namespace, the global VDSO data page
is replaced by a dedicated namespace data page and the global data
page is mapped next to it. Detailed explanations can be found at
commit 660fd04f93 ("lib/vdso: Prepare for time namespace support").
When it happens, __kernel_get_syscall_map and __kernel_get_tbfreq
and __kernel_sync_dicache don't work anymore because they read 0
instead of the data they need.
To address that, clock_mode has to be read. When it is set to
VDSO_CLOCKMODE_TIMENS, it means it is a dedicated namespace data page
and the global data is located on the following page.
Add a macro called get_realdatapage which reads clock_mode and add
PAGE_SIZE to the pointer provided by get_datapage macro when
clock_mode is equal to VDSO_CLOCKMODE_TIMENS. Use this new macro
instead of get_datapage macro except for time functions as they handle
it internally.
Fixes: 74205b3fc2 ("powerpc/vdso: Add support for time namespaces")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/all/ZtnYqZI-nrsNslwy@zx2c4.com/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
When an ifdef is used in the below manner, second one could be considered
as duplicate.
ifdef DEFINE_A
...code block...
ifdef DEFINE_A <-- This is a duplicate.
...code block...
endif
else
ifndef DEFINE_A <-- This is also duplicate.
...code block...
endif
endif
More details about the script and methods used to find these code
patterns are in cover letter of [1].
Few places in arch/powerpc where this pattern was seen:
paca.h:
Hunk1: Code is under check of CONFIG_PPC64 from line 13, hence the
second CONFIG_PPC64 at line 166 is a duplicate.
Hunk2: CONFIG_PPC_BOOK3S_64 was defined back to back. Merged the two
ifdefs.
asm-offsets.c:
Code is under check of CONFIG_PPC64 from line 176 hence second
CONFIG_PPC64 at line 249 is a duplicate.
powermac/feature.c:
#ifndef CONFIG_PPC64 is used at line 2066. And then in #else again
#ifdef CONFIG_PPC64 is used. Which is a duplicate since in #else means
CONFIG_PPC64 is defined.
xmon.c:
Code is under the check of CONFIG_SMP from line 521 hence the same
check of CONFIG_SMP at line 646 is a duplicate.
No functional change is intended here. It only aims to improve code
readability.
[1] https://lore.kernel.org/all/20240118080326.13137-1-sshegde@linux.ibm.com/
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240216053016.528906-1-sshegde@linux.ibm.com
PC-Relative or PCREL addressing is an extension to the ELF ABI which
uses Power ISA v3.1 PC-relative instructions to calculate addresses,
rather than the traditional TOC scheme.
Add an option to build vmlinux using pcrel addressing. Modules continue
to use TOC addressing.
- TOC address helpers and r2 are poisoned with -1 when running vmlinux.
r2 could be used for something useful once things are ironed out.
- Assembly must call C functions with @notoc annotation, or the linker
complains aobut a missing nop after the call. This is done with the
CFUNC macro introduced earlier.
- Boot: with the exception of prom_init, the execution branches to the
kernel virtual address early in boot, before any addresses are
generated, which ensures 34-bit pcrel addressing does not miss the
high PAGE_OFFSET bits. TOC relative addressing has a similar
requirement. prom_init does not go to the virtual address and its
addresses should not carry over to the post-prom kernel.
- Ftrace trampolines are converted from TOC addressing to pcrel
addressing, including module ftrace trampolines that currently use the
kernel TOC to find ftrace target functions.
- BPF function prologue and function calling generation are converted
from TOC to pcrel.
- copypage_64.S has an interesting problem, prefixed instructions have
alignment restrictions so the linker can add padding, which makes the
assembler treat the difference between two local labels as
non-constant even if alignment is arranged so padding is not required.
This may need toolchain help to solve nicely, for now move the prefix
instruction out of the alternate patch section to work around it.
This reduces kernel text size by about 6%.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230408021752.862660-6-npiggin@gmail.com
This is open-coded in process.c, ppc32 uses a different define with the
same value, and the C definition is name differently which makes it an
extra indirection to grep for.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-12-npiggin@gmail.com
This is a common offset that currently uses the overloaded
STACK_FRAME_OVERHEAD constant. It's easier to read and more
flexible to use a specific regs offset for this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221127124942.1665522-8-npiggin@gmail.com
The kvm code was refactored to convert some of kvm assembly routines to C.
This includes commits which moved code path for the kvm guest entry/exit
for p7/8 from aseembly to C. As part of the code changes, usage of some of
the macros were removed. But definitions still exist in the assembly files.
Commits are listed below:
Commit 2e1ae9cd56 ("KVM: PPC: Book3S HV: Implement radix prefetch workaround by disabling MMU")
Commit 9769a7fd79 ("KVM: PPC: Book3S HV: Remove radix guest support from P7/8 path")
Commit fae5c9f366 ("KVM: PPC: Book3S HV: remove ISA v3.0 and v3.1 support from P7/8 path")
Commit 57dc0eed73 ("KVM: PPC: Book3S HV P9: Implement PMU save/restore in C")
Many of the asm-offset macro definitions were missed to remove. Patch
fixes by removing the unused macros.
Signed-off-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220916105736.268153-2-disgoel@linux.vnet.ibm.com
Turn the existing Kconfig KVM_BOOK3S_HV_EXIT_TIMING into
KVM_BOOK3S_HV_P8_TIMING in preparation for the addition of a new
config for P9 timings.
This applies only to P8 code, the generic timing code is still kept
under KVM_BOOK3S_HV_EXIT_TIMING.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220525130554.2614394-3-farosas@linux.ibm.com
PPC64 needs some special logic to properly set up the TOC.
See commit 85baa09549 ("powerpc/livepatch: Add live patching support
on ppc64le") for details.
PPC32 doesn't have TOC so it doesn't need that logic, so adding
LIVEPATCH support is straight forward.
Add CONFIG_LIVEPATCH_64 and move livepatch stack logic into that item.
Livepatch sample modules all work.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/63cb094125b6a6038c65eeac2abaabbabe63addd.1640017960.git.christophe.leroy@csgroup.eu
We have many functionnalities common to 40x and BOOKE, it leads to
many places with #if defined(CONFIG_BOOKE) || defined(CONFIG_40x).
We are going to add a few more with KUAP for booke/40x, so create
a new symbol which is defined when either BOOKE or 40x is defined.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9a3dbd60924cb25c9f944d3d8205ac5a0d15e229.1634627931.git.christophe.leroy@csgroup.eu
Calling 'mfsr' to get the content of segment registers is heavy,
in addition it requires clearing of the 'reserved' bits.
In order to avoid this operation, save it in mm context and in
thread struct.
The saved sr0 is the one used by kernel, this means that on
locking entry it can be used as is.
For unlocking, the only thing to do is to clear SR_NX.
This improves null_syscall selftest by 12 cycles, ie 4%.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b02baf2ed8f09bad910dfaeeb7353b2ae6830525.1634627931.git.christophe.leroy@csgroup.eu
Compiling out hash support code when CONFIG_PPC_64S_HASH_MMU=n saves
128kB kernel image size (90kB text) on powernv_defconfig minus KVM,
350kB on pseries_defconfig minus KVM, 40kB on a tiny config.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fixup defined(ARCH_HAS_MEMREMAP_COMPAT_ALIGN), which needs CONFIG.
Fix radix_enabled() use in setup_initial_memory_limit(). Add some
stubs to reduce number of ifdefs.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211201144153.2456614-18-npiggin@gmail.com
Instead of relying on awful hacks to obtain the offset of the cpu field
in struct task_struct, move it back into struct thread_info, which does
not create the same level of circular dependency hell when trying to
include the header file that defines it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
THREAD_INFO_IN_TASK moved the CPU field out of thread_info, but this
causes some issues on architectures that define raw_smp_processor_id()
in terms of this field, due to the fact that #include'ing linux/sched.h
to get at struct task_struct is problematic in terms of circular
dependencies.
Given that thread_info and task_struct are the same data structure
anyway when THREAD_INFO_IN_TASK=y, let's move it back so that having
access to the type definition of struct thread_info is sufficient to
reference the CPU number of the current task.
Note that this requires THREAD_INFO_IN_TASK's definition of the
task_thread_info() helper to be updated, as task_cpu() takes a
pointer-to-const, whereas task_thread_info() (which is used to generate
lvalues as well), needs a non-const pointer. So make it a macro instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch into next.
That lets us resolve a conflict in arch/powerpc/sysdev/xive/common.c.
Between cbc06f051c ("powerpc/xive: Do not skip CPU-less nodes when
creating the IPIs"), which moved request_irq() out of xive_init_ipis(),
and 17df41fec5 ("powerpc: use IRQF_NO_DEBUG for IPIs") which added
IRQF_NO_DEBUG to that request_irq() call, which has now moved.
32 bits BOOKE have special interrupts for debug and other
critical events.
When handling those interrupts, dedicated registers are saved
in the stack frame in addition to the standard registers, leading
to a shift of the pt_regs struct.
Since commit db297c3b07 ("powerpc/32: Don't save thread.regs on
interrupt entry"), the pt_regs struct is expected to be at the
same place all the time.
Instead of handling a special struct in addition to pt_regs, just
add those special registers to struct pt_regs.
Fixes: db297c3b07 ("powerpc/32: Don't save thread.regs on interrupt entry")
Cc: stable@vger.kernel.org
Reported-by: Radu Rendec <radu.rendec@gmail.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/028d5483b4851b01ea4334d0751e7f260419092b.1625637264.git.christophe.leroy@csgroup.eu
Use the restart table facility to return from interrupt or system calls
without disabling MSR[EE] or MSR[RI].
Interrupt return asm is put into the low soft-masked region, to prevent
interrupts being processed here, although they are still taken as masked
interrupts which causes SRRs to be clobbered, and a pending soft-masked
interrupt to require replaying.
The return code uses restart table regions to redirct to a fixup handler
rather than continue with the exit, if such an interrupt happens. In
this case the interrupt return is redirected to a fixup handler which
reloads r1 for the interrupt stack and reloads registers and sets state
up to replay the soft-masked interrupt and try the exit again.
Some types of security exit fallback flushes and barriers are currently
unable to cope with reentrant interrupts, e.g., because they store some
state in the scratch SPR which would be clobbered even by masked
interrupts. For now the interrupts-enabled exits are disabled when these
flushes are used.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Guard unused exit_must_hard_disable() as reported by lkp]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-13-npiggin@gmail.com
When an interrupt is taken, the SRR registers are set to return to where
it left off. Unless they are modified in the meantime, or the return
address or MSR are modified, there is no need to reload these registers
when returning from interrupt.
Introduce per-CPU flags that track the validity of SRR and HSRR
registers. These are cleared when returning from interrupt, when
using the registers for something else (e.g., OPAL calls), when
adjusting the return address or MSR of a context, and when context
switching (which changes the return address and MSR).
This improves the performance of interrupt returns.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Fold in fixup patch from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210617155116.2167984-5-npiggin@gmail.com
Merge some powerpc KVM patches from our topic branch.
In particular this brings in Nick's big series rewriting parts of the
guest entry/exit path in C.
Conflicts:
arch/powerpc/kernel/security.c
arch/powerpc/kvm/book3s_hv_rmhandlers.S
PTE_SIZE means PTE page table size in most placed, whereas
in hash_low.S in means size of one entry in the table.
Rename it PTE_T_SIZE, and define it directly in hash_low.S
instead of going through asm-offsets.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83a008a9fd6cc3f2bbcb470f592555d260ed7a3d.1623063174.git.christophe.leroy@csgroup.eu
switch_mmu_context() does things that can easily be done in C.
For updating user segments, we have update_user_segments().
As mentionned in commit b5efec00b6 ("powerpc/32s: Move KUEP
locking/unlocking in C"), update_user_segments() has the loop
unrolled which is a significant performance gain.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/05c0875ad8220c03452c3a334946e207c6ca04d6.1622708530.git.christophe.leroy@csgroup.eu
_switch() saves and restores ALTIVEC and SPE status.
For altivec this is redundant with what __switch_to() does with
save_sprs() and restore_sprs() and giveup_all() before
calling _switch().
Add support for SPI in save_sprs() and restore_sprs() and
remove things from _switch().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/8ab21fd93d6e0047aa71e6509e5e312f14b2991b.1620998075.git.christophe.leroy@csgroup.eu
The P9 path now runs all supported radix guest combinations, so
remove radix guest support from the P7/8 path.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210528090752.3542186-24-npiggin@gmail.com
Following PACA related items are not used anymore by ASM code:
PACA_SIZE, PACACONTEXTID, PACALOWSLICESPSIZE, PACAHIGHSLICEPSIZE,
PACA_SLB_ADDR_LIMIT, MMUPSIZEDEFSIZE, PACASLBCACHE, PACASLBCACHEPTR,
PACASTABRR, PACAVMALLOCSLLP, MMUPSIZESLLP, PACACONTEXTSLLP,
PACALPPACAPTR, LPPACA_DTLIDX and PACA_DTL_RIDX.
Following items are also not used anymore:
SIGSEGV, NMI_MASK, THREAD_DBCR0, KUAP, TI_FLAGS, TI_PREEMPT,
DCACHEL1BLOCKSPERPAGE, ICACHEL1BLOCKSIZE, ICACHEL1LOGBLOCKSIZE,
ICACHEL1BLOCKSPERPAGE, STACK_REGS_KUAP, KVM_NEED_FLUSH, KVM_FWNMI,
VCPU_DEC, VCPU_SPMC, HSTATE_XICS_PHYS, HSTATE_SAVED_XIRR and
PPC_DBELL_MSGTYPE.
Remove all of them.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1c80981548dc0c4f145109cdd473022c1aad8d2b.1620223302.git.christophe.leroy@csgroup.eu
Update the new C and asm interrupt return code to account for 64e
specifics, switch over to use it.
The now-unused old ret_from_except code, that was moved to 64e after the
64s conversion, is removed.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210316104206.407354-5-npiggin@gmail.com
Commit aac6a91fea ("powerpc/asm: Remove unused symbols in
asm-offsets.c") removed GPR15 to GPR31 but kept GPR14,
probably because it pops up in a couple of comments when doing
a grep.
However, it was never used either, so remove it as well.
Fixes: aac6a91fea ("powerpc/asm: Remove unused symbols in asm-offsets.c")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9881c68fbca004f9ea18fc9473f630e11ccd6417.1615806071.git.christophe.leroy@csgroup.eu
If the code can use a stack in vm area, it can also use a
stack in linear space.
Simplify code by removing old non VMAP stack code on PPC32.
That means the data translation is now re-enabled early in
exception prolog in all cases, not only when using VMAP stacks.
While we are touching EXCEPTION_PROLOG macros, remove the
unused for_rtas parameter in EXCEPTION_PROLOG_1.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/7cd6440c60a7e8f4f035b245c57720f51e225aae.1615552866.git.christophe.leroy@csgroup.eu
ksp_limit is there to help detect stack overflows.
That is specific to ppc32 as it was removed from ppc64 in
commit cbc9565ee8 ("powerpc: Remove ksp_limit on ppc64").
There are other means for detecting stack overflows.
As ppc64 has proven to not need it, ppc32 should be able to do
without it too.
Lets remove it and simplify exception handling.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d789c3385b22e07bedc997613c0d26074cb513e7.1615552866.git.christophe.leroy@csgroup.eu
A large series adding wrappers for our interrupt handlers, so that irq/nmi/user
tracking can be isolated in the wrappers rather than spread in each handler.
Conversion of the 32-bit syscall handling into C.
A series from Nick to streamline our TLB flushing when using the Radix MMU.
Switch to using queued spinlocks by default for 64-bit server CPUs.
A rework of our PCI probing so that it happens later in boot, when more generic
infrastructure is available.
Two small fixes to allow 32-bit little-endian processes to run on 64-bit
kernels.
Other smaller features, fixes & cleanups.
Thanks to:
Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh Kumar K.V, Athira
Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang Fan, Christophe Leroy,
Christopher M. Riedl, Fabiano Rosas, Florian Fainelli, Frederic Barrat, Ganesh
Goudar, Hari Bathini, Jiapeng Chong, Joseph J Allen, Kajol Jain, Markus
Elfring, Michal Suchanek, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Pingfan Liu, Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan
Das, Stephen Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, Zheng
Yongjun.
-----BEGIN PGP SIGNATURE-----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=dB2S
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- A large series adding wrappers for our interrupt handlers, so that
irq/nmi/user tracking can be isolated in the wrappers rather than
spread in each handler.
- Conversion of the 32-bit syscall handling into C.
- A series from Nick to streamline our TLB flushing when using the
Radix MMU.
- Switch to using queued spinlocks by default for 64-bit server CPUs.
- A rework of our PCI probing so that it happens later in boot, when
more generic infrastructure is available.
- Two small fixes to allow 32-bit little-endian processes to run on
64-bit kernels.
- Other smaller features, fixes & cleanups.
Thanks to: Alexey Kardashevskiy, Ananth N Mavinakayanahalli, Aneesh
Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Cédric Le Goater, Chengyang
Fan, Christophe Leroy, Christopher M. Riedl, Fabiano Rosas, Florian
Fainelli, Frederic Barrat, Ganesh Goudar, Hari Bathini, Jiapeng Chong,
Joseph J Allen, Kajol Jain, Markus Elfring, Michal Suchanek, Nathan
Lynch, Naveen N. Rao, Nicholas Piggin, Oliver O'Halloran, Pingfan Liu,
Po-Hsu Lin, Qian Cai, Ram Pai, Randy Dunlap, Sandipan Das, Stephen
Rothwell, Tyrel Datwyler, Will Springer, Yury Norov, and Zheng Yongjun.
* tag 'powerpc-5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (188 commits)
powerpc/perf: Adds support for programming of Thresholding in P10
powerpc/pci: Remove unimplemented prototypes
powerpc/uaccess: Merge raw_copy_to_user_allowed() into raw_copy_to_user()
powerpc/uaccess: Merge __put_user_size_allowed() into __put_user_size()
powerpc/uaccess: get rid of small constant size cases in raw_copy_{to,from}_user()
powerpc/64: Fix stack trace not displaying final frame
powerpc/time: Remove get_tbl()
powerpc/time: Avoid using get_tbl()
spi: mpc52xx: Avoid using get_tbl()
powerpc/syscall: Avoid storing 'current' in another pointer
powerpc/32: Handle bookE debugging in C in syscall entry/exit
powerpc/syscall: Do not check unsupported scv vector on PPC32
powerpc/32: Remove the counter in global_dbcr0
powerpc/32: Remove verification of MSR_PR on syscall in the ASM entry
powerpc/syscall: implement system call entry/exit logic in C for PPC32
powerpc/32: Always save non volatile GPRs at syscall entry
powerpc/syscall: Change condition to check MSR_RI
powerpc/syscall: Save r3 in regs->orig_r3
powerpc/syscall: Use is_compat_task()
powerpc/syscall: Make interrupt.c buildable on PPC32
...
In commit bf13718bc5 ("powerpc: show registers when unwinding
interrupt frames") we changed our stack dumping logic to show the full
registers whenever we find an interrupt frame on the stack.
However we didn't notice that on 64-bit this doesn't show the final
frame, ie. the interrupt that brought us in from userspace, whereas on
32-bit it does.
That is due to confusion about the size of that last frame. The code
in show_stack() calls validate_sp(), passing it STACK_INT_FRAME_SIZE
to check the sp is at least that far below the top of the stack.
However on 64-bit that size is too large for the final frame, because
it includes the red zone, but we don't allocate a red zone for the
first frame.
So add a new define that encodes the correct size for 32-bit and
64-bit, and use it in show_stack().
This results in the full trace being shown on 64-bit, eg:
sysrq: Trigger a crash
Kernel panic - not syncing: sysrq triggered crash
CPU: 0 PID: 83 Comm: sh Not tainted 5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty #649
Call Trace:
[c00000000a1c3ac0] [c000000000897b70] dump_stack+0xc4/0x114 (unreliable)
[c00000000a1c3b00] [c00000000014334c] panic+0x178/0x41c
[c00000000a1c3ba0] [c00000000094e600] sysrq_handle_crash+0x40/0x50
[c00000000a1c3c00] [c00000000094ef98] __handle_sysrq+0xd8/0x210
[c00000000a1c3ca0] [c00000000094f820] write_sysrq_trigger+0x100/0x188
[c00000000a1c3ce0] [c0000000005559dc] proc_reg_write+0x10c/0x1b0
[c00000000a1c3d10] [c000000000479950] vfs_write+0xf0/0x360
[c00000000a1c3d60] [c000000000479d9c] ksys_write+0x7c/0x140
[c00000000a1c3db0] [c00000000002bf5c] system_call_exception+0x19c/0x2c0
[c00000000a1c3e10] [c00000000000d35c] system_call_common+0xec/0x278
--- interrupt: c00 at 0x7fff9fbab428
NIP: 00007fff9fbab428 LR: 000000001000b724 CTR: 0000000000000000
REGS: c00000000a1c3e80 TRAP: 0c00 Not tainted (5.11.0-rc2-gcc-8.2.0-00188-g571abcb96b10-dirty)
MSR: 900000000280f033 <SF,HV,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE> CR: 22002884 XER: 00000000
IRQMASK: 0
GPR00: 0000000000000004 00007fffc3cb8960 00007fff9fc59900 0000000000000001
GPR04: 000000002a4b32d0 0000000000000002 0000000000000063 0000000000000063
GPR08: 000000002a4b32d0 0000000000000000 0000000000000000 0000000000000000
GPR12: 0000000000000000 00007fff9fcca9a0 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 00000000100b8fd0
GPR20: 000000002a4b3485 00000000100b8f90 0000000000000000 0000000000000000
GPR24: 000000002a4b0440 00000000100e77b8 0000000000000020 000000002a4b32d0
GPR28: 0000000000000001 0000000000000002 000000002a4b32d0 0000000000000001
NIP [00007fff9fbab428] 0x7fff9fbab428
LR [000000001000b724] 0x1000b724
--- interrupt: c00
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210209141627.2898485-1-mpe@ellerman.id.au
SLB faults should not be taken while the PACA save areas are live, all
memory accesses should be fetches from the kernel text, and access to
PACA and the current stack, before C code is called or any other
accesses are made.
All of these have pinned SLBs so will not take a SLB fault. Therefore
EXSLB is not be required.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210208063406.331655-1-npiggin@gmail.com
This reverts much of commit c01015091a ("KVM: PPC: Book3S HV: Run HPT
guests on POWER9 radix hosts"), which was required to run HPT guests on
RPT hosts on early POWER9 CPUs without support for "mixed mode", which
meant the host could not run with MMU on while guests were running.
This code has some corner case bugs, e.g., when the guest hits a machine
check or HMI the primary locks up waiting for secondaries to switch LPCR
to host, which they never do. This could all be fixed in software, but
most CPUs in production have mixed mode support, and those that don't
are believed to be all in installations that don't use this capability.
So simplify things and remove support.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Tested-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
KVM code assumes single DAWR everywhere. Add code to support 2nd DAWR.
DAWR is a hypervisor resource and thus H_SET_MODE hcall is used to set/
unset it. Introduce new case H_SET_MODE_RESOURCE_SET_DAWR1 for 2nd DAWR.
Also, KVM will support 2nd DAWR only if CPU_FTR_DAWR1 is set.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Power10 is introducing a second DAWR (Data Address Watchpoint
Register). Use real register names (with suffix 0) from ISA for
current macros and variables used by kvm. One exception is
KVM_REG_PPC_DAWR. Keep it as it is because it's uapi so changing it
will break userspace.
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
This prepare kernel to operate with a different value than userspace AMR/IAMR.
For this, AMR/IAMR need to be saved and restored on entry and return from the
kernel.
With KUAP we modify kernel AMR when accessing user address from the kernel
via copy_to/from_user interfaces. We don't need to modify IAMR value in
similar fashion.
If MMU_FTR_PKEY is enabled we need to save AMR/IAMR in pt_regs on entering
kernel from userspace. If not we can assume that AMR/IAMR is not modified
from userspace.
We need to save AMR if we have MMU_FTR_BOOK3S_KUAP feature enabled and we are
interrupted within kernel. This is required so that if we get interrupted
within copy_to/from_user we continue with the right AMR value.
If we hae MMU_FTR_BOOK3S_KUEP enabled we need to restore IAMR on
return to userspace beause kernel will be running with a different
IAMR value.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-11-aneesh.kumar@linux.ibm.com
The config CONFIG_PPC_PKEY is used to select the base support that is
required for PPC_MEM_KEYS, KUAP, and KUEP. Adding this dependency
reduces the code complexity(in terms of #ifdefs) and enables us to
move some of the initialization code to pkeys.c
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201127044424.40686-4-aneesh.kumar@linux.ibm.com
Today vdso_data structure has:
- syscall_map_32[] and syscall_map_64[] on PPC64
- syscall_map_32[] on PPC32
On PPC32, syscall_map_32[] is populated using sys_call_table[].
On PPC64, syscall_map_64[] is populated using sys_call_table[]
and syscal_map_32[] is populated using compat_sys_call_table[].
To simplify vdso_setup_syscall_map(),
- On PPC32 rename syscall_map_32[] into syscall_map[],
- On PPC64 rename syscall_map_64[] into syscall_map[],
- On PPC64 rename syscall_map_32[] into compat_syscall_map[].
That way, syscall_map[] gets populated using sys_call_table[] and
compat_syscall_map[] gets population using compat_sys_call_table[].
Also define an empty compat_syscall_map[] on PPC32 to avoid ifdefs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/472734be0d9991eee320a06824219a5b2663736b.1601197618.git.christophe.leroy@csgroup.eu
