Use the irq_set_nr_irqs() function instead of the global variable
'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global
variable into a variable with file scope.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241015190953.1266194-4-bvanassche@acm.org
- Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
- Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=JlJ2
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
Currently we call irq_set_noprobe() in a loop for all IRQs, but indeed
it only works for IRQs below NR_IRQS_LEGACY because at init_IRQ() only
legacy interrupts have been allocated.
Instead, we can define ARCH_IRQ_INIT_FLAGS as IRQ_NOPROBE in asm/hwirq.h
and the core will automatically set the flag for all interrupts.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Add architectural preparation for AVEC irqchip, including:
1. CPUCFG feature bits definition for AVEC;
2. Detection of AVEC irqchip in cpu_probe();
3. New IPI type definition (IPI_CLEAR_VECTOR) for AVEC;
4. Provide arch_probe_nr_irqs() for large NR_IRQS;
5. Other related changes about the number of interrupts.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823103936.25092-2-zhangtianyang@loongson.cn
PARAVIRT config option and PV IPI is added for the guest side, function
pv_ipi_init() is used to add IPI sending and IPI receiving hooks. This
function firstly checks whether system runs in VM mode, and if kernel
runs in VM mode, it will call function kvm_para_available() to detect
the current hypervirsor type (now only KVM type detection is supported).
The paravirt functions can work only if current hypervisor type is KVM,
since there is only KVM supported on LoongArch now.
PV IPI uses virtual IPI sender and virtual IPI receiver functions. With
virtual IPI sender, IPI message is stored in memory rather than emulated
HW. IPI multicast is also supported, and 128 vcpus can received IPIs
at the same time like X86 KVM method. Hypercall method is used for IPI
sending.
With virtual IPI receiver, HW SWI0 is used rather than real IPI HW.
Since VCPU has separate HW SWI0 like HW timer, there is no trap in IPI
interrupt acknowledge. Since IPI message is stored in memory, there is
no trap in getting IPI message.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Refine the ipi handling on LoongArch platform, there are three
modifications:
1. Add generic function get_percpu_irq(), replacing some percpu irq
functions such as get_ipi_irq()/get_pmc_irq()/get_timer_irq() with
get_percpu_irq().
2. Change definition about parameter action called by function
loongson_send_ipi_single() and loongson_send_ipi_mask(), and it is
defined as decimal encoding format at ipi sender side. Normal decimal
encoding is used rather than binary bitmap encoding for ipi action, ipi
hw sender uses decimal encoding code, and ipi receiver will get binary
bitmap encoding, the ipi hw will convert it into bitmap in ipi message
buffer.
3. Add a structure smp_ops on LoongArch platform so that pv ipi can be
used later.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
While interrupts are assigned ECodes `64 + interrupt number`, all
existing use sites of interrupt numbers want the 64 subtracted.
Re-arrange the definitions so that the actual interrupt number is used
everywhere, and make EXCCODE_INT_END inclusive as it is more intuitive
that way.
While at it, according to the asm/loongarch.h definitions, the total
number of architectural interrupts should be 14, but various other
places indicate otherwise (13 or 15). Those places have been adjusted
to 14 as well for consistency.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
SMP operations can be shared by Loongson-2 series and Loongson-3 series,
so we change the prefix from loongson3 to loongson for all functions and
data structures.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch CPUINTC stands for CSR.ECFG/CSR.ESTAT and related interrupt
controller that described in Section 7.4 of "LoongArch Reference Manual,
Vol 1". For more information please refer Documentation/loongarch/irq-
chip-model.rst.
LoongArch CPUINTC has 13 interrupt sources: SWI0~1, HWI0~7, IPI, TI
(Timer) and PCOV (PMC). IRQ mappings of HWI0~7 are configurable (can be
created from DT/ACPI), but IPI, TI (Timer) and PCOV (PMC) are hardcoded
bits, so we expose the fwnode_handle to map them, and get mapped irq
by irq_create_mapping when using them.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-13-git-send-email-lvjianmin@loongson.cn
LIOINTC stands for "Legacy I/O Interrupts" that described in Section
11.1 of "Loongson 3A5000 Processor Reference Manual". For more
information please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-11-git-send-email-lvjianmin@loongson.cn
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in
Section 5 of "Loongson 7A1000 Bridge User Manual". For more information
please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-10-git-send-email-lvjianmin@loongson.cn
PCH-PIC/PCH-MSI stands for "Interrupt Controller" that described in
Section 5 of "Loongson 7A1000 Bridge User Manual". For more information
please refer Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-9-git-send-email-lvjianmin@loongson.cn
PCH-LPC stands for "LPC Interrupts" that described in Section 24.3 of
"Loongson 7A1000 Bridge User Manual". For more information please refer
Documentation/loongarch/irq-chip-model.rst.
Co-developed-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-8-git-send-email-lvjianmin@loongson.cn
For systems with two chipsets, there are two related pch-pic and
pch-msi irqdomains, each of which has the same node id as its
parent irqdomain. So we use a structure to mantain the relation
of node and it's parent irqdomain as pch irqdomin, the 'pci_segment'
field is only used to match the pci segment of a pci device when
setting msi irqdomain for the device.
struct acpi_vector_group {
int node;
int pci_segment;
struct irq_domain *parent;
};
The field 'pci_segment' and 'node' are initialized from MCFG, and
the parent irqdomain driver will set field 'parent' by matching same
'node'.
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1658314292-35346-7-git-send-email-lvjianmin@loongson.cn
1, We assume arch/loongarch/include/asm/smp.h be included in include/
linux/smp.h is valid and the reverse inclusion isn't. So remove the
<linux/smp.h> in arch/loongarch/include/asm/smp.h.
2, arch/loongarch/include/asm/smp.h is only needed when CONFIG_SMP,
and setup.c include it only because it need plat_smp_setup(). So,
reorganize setup.c & smp.h, and then remove <asm/smp.h> in setup.c.
3, Fix cacheinfo.c and percpu.h build error by adding the missing header
files when !CONFIG_SMP.
4, Fix acpi.c build error by adding CONFIG_SMP guards.
5, Move irq_stat definition from smp.c to irq.c and fix its declaration.
6, Select CONFIG_SMP for CONFIG_NUMA, similar as other architectures do.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch-based procesors have 4, 8 or 16 cores per package. This patch
adds multi-processor (SMP) support for LoongArch.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add the exception and interrupt handling machanism for basic LoongArch
support.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
