Enable the KVM_IRQ_ROUTING/KVM_IRQCHIP/KVM_MSI configuration items,
add the KVM_CAP_IRQCHIP capability, and implement the query interface
of the in-kernel irqchip.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement the communication interface between the user mode programs
and the kernel in PCHPIC interrupt control simulation, which is used
to obtain or send the simulation data of the interrupt controller in
the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement the communication interface between the user mode programs
and the kernel in EIOINTC interrupt controller simulation, which is
used to obtain or send the simulation data of the interrupt controller
in the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement the communication interface between the user mode programs
and the kernel in IPI interrupt controller simulation, which is used
to obtain or send the simulation data of the interrupt controller in
the user mode process, and is also used in VM migration or VM saving
and restoration.
Signed-off-by: Min Zhou <zhoumin@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Export kernel paravirt features to user space, so that VMM can control
each single paravirt feature. By default paravirt features will be the
same with kvm supported features if VMM does not set it.
Also a new feature KVM_FEATURE_VIRT_EXTIOI is added which can be set
from user space. This feature indicates that the virt EIOINTC can route
interrupts to 256 vCPUs, rather than 4 vCPUs like with real HW.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On LoongArch, the host and guest have their own PMU CSRs registers and
they share PMU hardware resources. A set of PMU CSRs consists of a CTRL
register and a CNTR register. We can set which PMU CSRs are used by the
guest by writing to the GCFG register [24:26] bits.
On KVM side:
- Save the host PMU CSRs into structure kvm_context.
- If the host supports the PMU feature.
- When entering guest mode, save the host PMU CSRs and restore the guest PMU CSRs.
- When exiting guest mode, save the guest PMU CSRs and restore the host PMU CSRs.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Every vcpu has separate LBT registers. And there are four scr registers,
one flags and ftop register for LBT extension. When VM migrates, VMM
needs to get LBT registers for every vcpu.
Here macro KVM_REG_LOONGARCH_LBT is added for new vcpu lbt register type,
the following macro is added to get/put LBT registers.
KVM_REG_LOONGARCH_LBT_SCR0
KVM_REG_LOONGARCH_LBT_SCR1
KVM_REG_LOONGARCH_LBT_SCR2
KVM_REG_LOONGARCH_LBT_SCR3
KVM_REG_LOONGARCH_LBT_EFLAGS
KVM_REG_LOONGARCH_LBT_FTOP
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Loongson SIMD Extension (LSX), Loongson Advanced SIMD Extension (LASX)
and Loongson Binary Translation (LBT) features are defined in register
CPUCFG2. Two kinds of LSX/LASX/LBT feature detection are added here, one
is VCPU feature, and the other is VM feature. VCPU feature dection can
only work with VCPU thread itself, and requires VCPU thread is created
already. So LSX/LASX/LBT feature detection for VM is added also, it can
be done even if VM is not created, and also can be done by any threads
besides VCPU threads.
Here ioctl command KVM_HAS_DEVICE_ATTR is added for VM, and macro
KVM_LOONGARCH_VM_FEAT_CTRL is added to check supported feature. And
five sub-features relative with LSX/LASX/LBT are added as following:
KVM_LOONGARCH_VM_FEAT_LSX
KVM_LOONGARCH_VM_FEAT_LASX
KVM_LOONGARCH_VM_FEAT_X86BT
KVM_LOONGARCH_VM_FEAT_ARMBT
KVM_LOONGARCH_VM_FEAT_MIPSBT
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add ParaVirt steal time feature in host side, VM can search supported
features provided by KVM hypervisor, a feature KVM_FEATURE_STEAL_TIME
is added here. Like x86, steal time structure is saved in guest memory,
one hypercall function KVM_HCALL_FUNC_NOTIFY is added to notify KVM to
enable this feature.
One CPU attr ioctl command KVM_LOONGARCH_VCPU_PVTIME_CTRL is added to
save and restore the base address of steal time structure when a VM is
migrated.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When VM runs in kvm mode, system will not exit to host mode when
executing a general software breakpoint instruction such as INSN_BREAK,
trap exception happens in guest mode rather than host mode. In order to
debug guest kernel on host side, one mechanism should be used to let VM
exit to host mode.
Here a hypercall instruction with a special code is used for software
breakpoint usage. VM exits to host mode and kvm hypervisor identifies
the special hypercall code and sets exit_reason with KVM_EXIT_DEBUG. And
then let qemu handle it.
Idea comes from ppc kvm, one api KVM_REG_LOONGARCH_DEBUG_INST is added
to get the hypercall code. VMM needs get sw breakpoint instruction with
this api and set the corresponding sw break point for guest kernel.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
KVM uses __KVM_HAVE_* symbols in the architecture-dependent uapi/asm/kvm.h to mask
unused definitions in include/uapi/linux/kvm.h. __KVM_HAVE_READONLY_MEM however
was nothing but a misguided attempt to define KVM_CAP_READONLY_MEM only on
architectures where KVM_CHECK_EXTENSION(KVM_CAP_READONLY_MEM) could possibly
return nonzero. This however does not make sense, and it prevented userspace
from supporting this architecture-independent feature without recompilation.
Therefore, these days __KVM_HAVE_READONLY_MEM does not mask anything and
is only used in virt/kvm/kvm_main.c. Userspace does not need to test it
and there should be no need for it to exist. Remove it and replace it
with a Kconfig symbol within Linux source code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds LSX (128bit SIMD) support for LoongArch KVM.
There will be LSX exception in KVM when guest use the LSX instructions.
KVM will enable LSX and restore the vector registers for guest and then
return to guest to continue running.
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add LoongArch KVM related header files, including kvm.h, kvm_host.h and
kvm_types.h. All of those are about LoongArch virtualization features
and kvm interfaces.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
