Move regulator-vbus device node from common to the usbphy-ctrl device node
of the individual SoC dtsi's as it embeds the vbus regulator.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715140705.334183-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Replace the fixed regulator for USB VBUS and use the proper one that
controls regulator based on VBUS detection.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240702180032.207275-5-biju.das.jz@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Currently audio mclk uses a fixed clk of 11.2896MHz (multiple of 44.1kHz).
Replace this fixed clk with the programmable versa3 clk that can provide
the clocking to support both 44.1kHz (with a clock of 11.2896MHz) and
48kHz (with a clock of 12.2880MHz), based on audio sampling rate for
playback and record.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230825090518.87394-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On RZ/G2{L,LC} SoM module, the wm8978 audio codec is connected to ssi0,
whereas on RZ/G2UL it is connected to ssi1. So move ssi0 and cpu
sound_dai nodes from common dtsi to board specific dtsi.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220429072400.23729-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On RZ/G2{L,LC} SoM module, gpio for power selection is connected to
P39_1 whereas on RZ/G2UL it is connected to P6_1. So move gpios property
of vccq_sdhi1 regulator from common dtsi to soc specific dtsi.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220401175427.19078-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On RZ/G2L SoM module, the Audio codec is connected to i2c3 bus whereas on
RZ/G2LC, it is connected to i2c2 bus. So move out i2c3 and wm8978 nodes
from common dtsi to soc specific dtsi.
While at it add wm8978 node to RZ/G2LC SoC specific dtsi to fix the
build error.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220303164155.7706-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/{G2L,V2L} and G2LC SoC use the same carrier board, but the SoM is
different.
Different pin mapping is possible on SoM. For eg:- RZ/G2L SMARC EVK
uses SCIF2, whereas RZ/G2LC uses SCIF1 for the serial interface available
on PMOD1.
This patch adds support for handling the pin mapping differences by moving
definitions common to RZ/G2L and RZ/G2LC to a common dtsi file.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
