num-channels and qcom,num-ees are required when there are no clocks
specified in the device tree, because we have no reliable way to read them
from the hardware registers if we cannot ensure the BAM hardware is up when
the device is being probed.
This has often been forgotten when adding new SoC device trees, so make
this clear by describing this requirement in the schema.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-7-f560889e65d8@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Qualcomm BAM DMA controller has DMA-coherent support so define it in the
properties section.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kaushal Kumar <quic_kaushalk@quicinc.com>
Link: https://lore.kernel.org/r/20250423063054.28795-3-quic_kaushalk@quicinc.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding
-----BEGIN PGP SIGNATURE-----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=LPWk
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"New controller support and updates to drivers.
New support:
- Qualcomm SM6115 and QCM2290 dmaengine support
- at_xdma support for microchip,sam9x7 controller
Updates:
- idxd updates for wq simplification and ats knob updates
- fsl edma updates for v3 support
- Xilinx AXI4-Stream control support
- Yaml conversion for bcm dma binding"
* tag 'dmaengine-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (53 commits)
dmaengine: fsl-edma: integrate v3 support
dt-bindings: fsl-dma: fsl-edma: add edma3 compatible string
dmaengine: fsl-edma: move tcd into struct fsl_dma_chan
dmaengine: fsl-edma: refactor chan_name setup and safety
dmaengine: fsl-edma: move clearing of register interrupt into setup_irq function
dmaengine: fsl-edma: refactor using devm_clk_get_enabled
dmaengine: fsl-edma: simply ATTR_DSIZE and ATTR_SSIZE by using ffs()
dmaengine: fsl-edma: move common IRQ handler to common.c
dmaengine: fsl-edma: Remove enum edma_version
dmaengine: fsl-edma: transition from bool fields to bitmask flags in drvdata
dmaengine: fsl-edma: clean up EXPORT_SYMBOL_GPL in fsl-edma-common.c
dmaengine: fsl-edma: fix build error when arch is s390
dmaengine: idxd: Fix issues with PRS disable sysfs knob
dmaengine: idxd: Allow ATS disable update only for configurable devices
dmaengine: xilinx_dma: Program interrupt delay timeout
dmaengine: xilinx_dma: Use tasklet_hi_schedule for timing critical usecase
dmaengine: xilinx_dma: Freeup active list based on descriptor completion bit
dmaengine: xilinx_dma: Increase AXI DMA transaction segment count
dmaengine: xilinx_dma: Pass AXI4-Stream control words to dma client
dt-bindings: dmaengine: xilinx_dma: Add xlnx,irq-delay property
...
Fix typos in Documentation/devicetree/bindings. The changes are in
descriptions or comments where they shouldn't affect functionality.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230814212822.193684-3-helgaas@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The BAM DMA resources can be controlled remotely (e.g. by trusted
environment; needs qcom,powered-remotely or qcom,controlled-remotely
properties) or locally. In the latter case we need to provide its
clock.
Require one of methods of such control to properly validate DTS.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230626145645.646136-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since SM8250 BAM DMA engine supports six iommu entries,
increase the maxItems in the iommu property section, without
which 'dtbs_check' would throw errors.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-3-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add new compatible for BAM DMA engine version v1.7.4 which is
found on Qualcomm SM6115 and QCM2290 SoCs. Since its very similar
to v1.7.0 used on SM8150 like SoCs, mark the comptible scheme
accordingly.
While at it, also update qcom,bam-dma bindings to add comments
which describe the BAM DMA versions used in SM8150 and SM8250 SoCs.
This provides an easy reference for identifying the actual BAM DMA
version available on Qualcomm SoCs.
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20230630082230.2264698-2-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
As a user recently noted, the qcom,bam-dma binding document
describes the msm8974 BAM DMA node in the 'example section'
incorrectly. Fix the same by making it consistent with the node
present inside 'qcom-msm8974' dts file, namely the 'reg' and
'interrupt' values which are incorrect in the 'example section'.
While at it also make two additioanal minor cleanups:
- mention Bjorn's new email ID in the document, and
- add SDM845 in the comment line for the SoCs on which
qcom,bam-v1.7.0 version is supported.
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220926112200.1948080-1-bhupesh.sharma@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
