The check for non-zero ring with RSS is only relevant for
ETHTOOL_SRXCLSRLINS command, in other cases the check tries to access
memory which was not initialized by the userspace tool. Only perform the
check in case of ETHTOOL_SRXCLSRLINS.
Without this patch, filter deletion (for example) could statistically
result in a false error:
# ethtool --config-ntuple eth3 delete 484
rmgr: Cannot delete RX class rule: Invalid argument
Cannot delete classification rule
Fixes: 9e43ad7a1e ("net: ethtool: only allow set_rxnfc with rss + ring_cookie if driver opts in")
Link: https://lore.kernel.org/netdev/871a9ecf-1e14-40dd-bbd7-e90c92f89d47@nvidia.com/
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20241202164805.1637093-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ethtool ntuple filters with FLOW_RSS were originally defined as adding
the base queue ID (ring_cookie) to the value from the indirection table,
so that the same table could distribute over more than one set of queues
when used by different filters.
However, some drivers / hardware ignore the ring_cookie, and simply use
the indirection table entries as queue IDs directly. Thus, for drivers
which have not opted in by setting ethtool_ops.cap_rss_rxnfc_adds to
declare that they support the original (addition) semantics, reject in
ethtool_set_rxnfc any filter which combines FLOW_RSS and a nonzero ring.
(For a ring_cookie of zero, both behaviours are equivalent.)
Set the cap bit in sfc, as it is known to support this feature.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://patch.msgid.link/cc3da0844083b0e301a33092a6299e4042b65221.1731499022.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Change the type of the middle struct member currently causing trouble from
`struct ethtool_link_settings` to `struct ethtool_link_settings_hdr`.
Additionally, update the type of some variables in various functions that
don't access the flexible-array member, changing them to the newly created
`struct ethtool_link_settings_hdr`. These changes are needed because the
type of the conflicting middle members changed. So, those instances that
expect the type to be `struct ethtool_link_settings` should be adjusted to
the newly created type `struct ethtool_link_settings_hdr`.
Also, adjust variable declarations to follow the reverse xmas tree
convention.
Fix 3338 of the following -Wflex-array-member-not-at-end warnings:
include/linux/ethtool.h:214:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/0bc2809fe2a6c11dd4c8a9a10d9bd65cccdb559b.1730238285.git.gustavoars@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ntuple filters can specify an rss context to use for packet hashing
and queue selection. When a filter is referencing an rss context, it
should be invalid for that context to be deleted. A list of active
ntuple filters and their associated rss contexts can be compiled by
querying a device's ethtool_ops.get_rxnfc. This patch checks to see if
any ntuple filters are referencing an rss context during context
deletion, and prevents the deletion if the requested context is still
in use.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This warning is emitted when a driver does not default populate an rss
key when one is not provided from userspace. Some devices do not
support individual rss keys per context. For these devices, it is ok
to leave the key zeroed out in ethtool_rxfh_context. Do not warn on
zeroed key when ethtool_ops.rxfh_per_ctx_key == 0.
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20241003162310.1310576-1-daniel.zahka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17e2d ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
marvell/otx2 and mvpp2 do not support setting different
keys for different RSS contexts. Contexts have separate
indirection tables but key is shared with all other contexts.
This is likely fine, indirection table is the most important
piece.
Don't report the key-related parameters from such drivers.
This prevents driver-errors, e.g. otx2 always writes
the main key, even when user asks to change per-context key.
The second reason is that without this change tracking
the keys by the core gets complicated. Even if the driver
correctly reject setting key with rss_context != 0,
change of the main key would have to be reflected in
the XArray for all additional contexts.
Since the additional contexts don't have their own keys
not including the attributes (in Netlink speak) seems
intuitive. ethtool CLI seems to deal with it just fine.
Having to set the flag in majority of the drivers is
a bit tedious but not reporting the key is a safer
default.
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
cap_rss_ctx_supported was created because the API for creating
and configuring additional contexts is mux'ed with the normal
RSS API. Presence of ops does not imply driver can actually
support rss_context != 0 (in fact drivers mostly ignore that
field). cap_rss_ctx_supported lets core check that the driver
is context-aware before calling it.
Now that we have .create_rxfh_context, there is no such
ambiguity. We can depend on presence of the op.
Make setting the bit optional.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently ethtool_set_channel calls separate functions to check whether
the new channel number violates rss configuration or flow steering
configuration.
Very soon we need to check whether the new channel number violates
memory provider configuration as well.
To do all 3 checks cleanly, add a wrapper around
ethtool_get_max_rxnfc_channel() and ethtool_get_max_rxfh_channel(),
which does both checks. We can later extend this wrapper to add the
memory provider check in one place.
Note that in the current code, we put a descriptive genl error message
when we run into issues. To preserve the error message, we pass the
genl_info* to the common helper. The ioctl calls can pass NULL instead.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20240808205345.2141858-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'at least one change' requirement is not applicable for context
creation, skip the check in such case.
This allows a command such as 'ethtool -X eth0 context new' to work.
The command works by mistake when using older versions of userspace
ethtool due to an incompatibility issue where rxfh.input_xfrm is passed
as zero (unset) instead of RXH_XFRM_NO_CHANGE as done with recent
userspace. This patch does not try to solve the incompatibility issue.
Link: https://lore.kernel.org/netdev/05ae8316-d3aa-4356-98c6-55ed4253c8a7@nvidia.com/
Fixes: 84a1d9c482 ("net: ethtool: extend RXNFC API to support RSS spreading of filter matches")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240807173352.3501746-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab186 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We expect drivers implementing the new create/modify/destroy
API to populate the defaults in struct ethtool_rxfh_context.
In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key
are NULL so drivers can't give us defaults even if they want to.
Call get_rxfh() to fetch the values. We can reuse rxfh_dev
for the get_rxfh(), rxfh stores the input from the user.
This fixes IOCTL reporting 0s instead of the default key /
indir table for drivers using legacy API.
Add a check to try to catch drivers using the new API
but not populating the key.
Fixes: 7964e78846 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The indirection table and the key follow struct ethtool_rxfh
in user memory.
To reset the indirection table user space calls SET_RXFH with
table of size 0 (OTOH to say "no change" it should use -1 / ~0).
The logic for calculating the offset where they key sits is
incorrect in this case, as kernel would still offset by the full
table length, while for the reset there is no indir table and
key is immediately after the struct.
$ ethtool -X eth0 default hkey 01:02:03...
$ ethtool -x eth0
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
[...]
Fixes: 3de0b59239 ("ethtool: Support for configurable RSS hash key")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In prevision to add new UAPI for hwtstamp we will be limited to the struct
ethtool_ts_info that is currently passed in fixed binary format through the
ETHTOOL_GET_TS_INFO ethtool ioctl. It would be good if new kernel code
already started operating on an extensible kernel variant of that
structure, similar in concept to struct kernel_hwtstamp_config vs struct
hwtstamp_config.
Since struct ethtool_ts_info is in include/uapi/linux/ethtool.h, here
we introduce the kernel-only structure in include/linux/ethtool.h.
The manual copy is then made in the function called by ETHTOOL_GET_TS_INFO.
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20240709-feature_ptp_netnext-v17-6-b5317f50df2a@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c809 ("net: ethtool: Fix RSS setting")
eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers (bnxt but I think also mlx5 from ML discussions) change
the size of the indirection table depending on the number of Rx rings.
Decouple the max table size from the size of the currently used table,
so that we can reserve space in the context for table growth.
Static members in ethtool_ops are good enough for now, we can add
callbacks to read the max size more dynamically if someone needs
that.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user submits a rxfh set command without touching XFRM_SYM_XOR,
rxfh.input_xfrm is set to RXH_XFRM_NO_CHANGE, which is equal to 0xff.
Testing if (rxfh.input_xfrm & RXH_XFRM_SYM_XOR &&
!ops->cap_rss_sym_xor_supported)
return -EOPNOTSUPP;
Will always be true on devices that don't set cap_rss_sym_xor_supported,
since rxfh.input_xfrm & RXH_XFRM_SYM_XOR is always true, if input_xfrm
was not set, i.e RXH_XFRM_NO_CHANGE=0xff, which will result in failure
of any command that doesn't require any change of XFRM, e.g RSS context
or hash function changes.
To avoid this breakage, test if rxfh.input_xfrm != RXH_XFRM_NO_CHANGE
before testing other conditions. Note that the problem will only trigger
with XFRM-aware userspace, old ethtool CLI would continue to work.
Fixes: 0dd415d155 ("net: ethtool: add a NO_CHANGE uAPI for new RXFH's input_xfrm")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20240710225538.43368-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 0d1b7d6c92 ("bnxt: fix crashes when reducing ring count with
active RSS contexts") proves that allowing indirection table to contain
channels with out of bounds IDs may lead to crashes. Currently the
max channel check in the core gets skipped if driver can't fetch
the indirection table or when we can't allocate memory.
Both of those conditions should be extremely rare but if they do
happen we should try to be safe and fail the channel change.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710174043.754664-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 31e0aa99dc ("ethtool: Veto some operations during firmware flashing process")
added a flag module_fw_flash_in_progress to struct net_device. As
this is ethtool related state, move it to the recently created
struct ethtool_netdev_state, accessed via the 'ethtool' member of
struct net_device.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20240703121849.652893-1-edward.cree@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Device driver gets access to rxfh_dev, while rxfh is just a local
copy of user space params. We need to check what RSS context ID
driver assigned in rxfh_dev, not rxfh.
Using rxfh leads to trying to store all contexts at index 0xffffffff.
From the user perspective it leads to "driver chose duplicate ID"
warnings when second context is added and inability to access any
contexts even tho they were successfully created - xa_load() for
the actual context ID will return NULL, and syscall will return -ENOENT.
Looks like a rebasing mistake, since rxfh_dev was added relatively
recently by commit fb6e30a725 ("net: ethtool: pass a pointer to
parameters to get/set_rxfh ethtool ops").
Fixes: eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240702164157.4018425-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 'ethtool -x' with rss_context != 0, instead of calling the driver to
read the RSS settings for the context, just get the settings from the
rss_ctx xarray, and return them to the user with no driver involvement.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/2d0190fa29638f307ea720f882ebd41f6f867694.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While this is not needed to serialise the ethtool entry points (which
are all under RTNL), drivers may have cause to asynchronously access
dev->ethtool->rss_ctx; taking dev->ethtool->rss_lock allows them to
do this safely without needing to take the RTNL.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/7f9c15eb7525bf87af62c275dde3a8570ee8bf0a.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new API to create/modify/remove RSS contexts, that passes in the
newly-chosen context ID (not as a pointer) rather than leaving the
driver to choose it on create. Also pass in the ctx, allowing drivers
to easily use its private data area to store their hardware-specific
state.
Keep the existing .set_rxfh API for now as a fallback, but deprecate it
for custom contexts (rss_context != 0).
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/45f1fe61df2163c091ec394c9f52000c8b16cc3b.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since drivers are still choosing the context IDs, we have to force the
XArray to use the ID they've chosen rather than picking one ourselves,
and handle the case where they give us an ID that's already in use.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/801f5faa4cec87c65b2c6e27fb220c944bce593a.1719502240.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net_dev->ethtool is a pointer to new struct ethtool_netdev_state, which
currently contains only the wol_enabled field.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a562278371de7534ed1eb17531838ca090633.1719502239.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some operations cannot be performed during the firmware flashing
process.
For example:
- Port must be down during the whole flashing process to avoid packet loss
while committing reset for example.
- Writing to EEPROM interrupts the flashing process, so operations like
ethtool dump, module reset, get and set power mode should be vetoed.
- Split port firmware flashing should be vetoed.
In order to veto those scenarios, add a flag in 'struct net_device' that
indicates when a firmware flash is taking place on the module and use it
to prevent interruptions during the process.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is used with the set_eee() ethtool operation. Certain
fields of struct ethtool_keee() are relevant only for the get_eee()
operation. In addition, in case of the ioctl interface, we have no
guarantee that userspace sends sane values in struct ethtool_eee.
Therefore explicitly ignore all fields not needed for set_eee().
This protects from drivers trying to use unchecked and unreliable
data, relying on specific userspace behavior.
Note: Such unsafe driver behavior has been found and fixed in the
tg3 driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/ad7ee11e-eb7a-4975-9122-547e13a161d8@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All MAC drivers have been converted to use the link mode members of
keee. So remove the _u32 values, and the code in the ethtool core to
convert the legacy _u32 values to link modes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when you switch between branches or something like that and
rebuild, net/ethtool/ioctl.c has to be built again because it depends
on UTS_RELEASE.
By instead referencing a string variable stored in another object file,
this can be avoided.
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240220194244.2056384-1-jannh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add linkmode bitmap members to struct ethtool_keee, but keep the legacy
u32 bitmaps for compatibility with existing drivers.
Use linkmode "supported" not being empty as indicator that a user wants
to use the linkmode bitmap members instead of the legacy bitmaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is in preparation of using the existing names for linkmode
bitmaps.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to later extend struct ethtool_keee, we have to decouple it
from the userspace format represented by struct ethtool_eee.
Therefore switch back to struct ethtool_eee, representing the userspace
format, and add conversion between ethtool_eee and ethtool_keee.
Struct ethtool_keee will be changed in follow-up patches, therefore
don't do a *keee = *eee here.
Member cmd isn't copied, because it's not used, and we'll remove
it in the next patch of this series. In addition omit setting cmd
to ETHTOOL_GEEE in the ioctl response, userspace ethtool isn't
interested in it.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to pass EEE link modes beyond bit 32 to userspace we have to
complement the 32 bit bitmaps in struct ethtool_eee with linkmode
bitmaps. Therefore, similar to ethtool_link_settings and
ethtool_link_ksettings, add a struct ethtool_keee. In a first step
it's an identical copy of ethtool_eee. This patch simply does a
s/ethtool_eee/ethtool_keee/g for all users.
No functional change intended.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
RXFH input_xfrm currently has three supported values: 0 (clear all),
symmetric_xor and NO_CHANGE.
Reject any other value sent from user-space.
Fixes: 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20240104212653.394424-1-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
adds a check to the ethtool set_rxnfc operation, which checks the RX
flow hash if the flag RXH_XFRM_SYM_XOR is set. This flag is introduced
with the same commit. It calls the ethtool get_rxfh operation to get the
RX flow hash data. If get_rxfh is not supported, then EOPNOTSUPP is
returned.
There are driver like tsnep, macb, asp2, genet, gianfar, mtk, ... which
support the ethtool operation set_rxnfc but not get_rxfh. This results
in EOPNOTSUPP returned by ethtool_set_rxnfc() without actually calling
the ethtool operation set_rxnfc. Thus, set_rxnfc got broken for all
these drivers.
Check RX flow hash in ethtool_set_rxnfc() only if driver supports RX
flow hash.
Fixes: 13e59344fb ("net: ethtool: add support for symmetric-xor RSS hash")
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Link: https://lore.kernel.org/r/20231226205536.32003-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Symmetric RSS hash functions are beneficial in applications that monitor
both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc).
Getting all traffic of the same flow on the same RX queue results in
higher CPU cache efficiency.
A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry
by XORing the source and destination fields and pass the values to the
RSS hash algorithm.
The user may request RSS hash symmetry for a specific algorithm, via:
# ethtool -X eth0 hfunc <hash_alg> symmetric-xor
or turn symmetry off (asymmetric) by:
# ethtool -X eth0 hfunc <hash_alg>
The specific fields for each flow type should then be specified as usual
via:
# ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-4-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the RSS context parameters to struct ethtool_rxfh_param and use the
get/set_rxfh to handle the RSS contexts as well.
This is part 2/2 of the fix suggested in [1]:
- Add a rss_context member to the argument struct and a capability
like cap_link_lanes_supported to indicate whether driver supports
rss contexts, then you can remove *et_rxfh_context functions,
and instead call *et_rxfh() with a non-zero rss_context.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
CC: Jesse Brandeburg <jesse.brandeburg@intel.com>
CC: Tony Nguyen <anthony.l.nguyen@intel.com>
CC: Marcin Wojtas <mw@semihalf.com>
CC: Russell King <linux@armlinux.org.uk>
CC: Sunil Goutham <sgoutham@marvell.com>
CC: Geetha sowjanya <gakula@marvell.com>
CC: Subbaraya Sundeep <sbhatta@marvell.com>
CC: hariprasad <hkelam@marvell.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
CC: Leon Romanovsky <leon@kernel.org>
CC: Edward Cree <ecree.xilinx@gmail.com>
CC: Martin Habets <habetsm.xilinx@gmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-3-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The get/set_rxfh ethtool ops currently takes the rxfh (RSS) parameters
as direct function arguments. This will force us to change the API (and
all drivers' functions) every time some new parameters are added.
This is part 1/2 of the fix, as suggested in [1]:
- First simplify the code by always providing a pointer to all params
(indir, key and func); the fact that some of them may be NULL seems
like a weird historic thing or a premature optimization.
It will simplify the drivers if all pointers are always present.
- Then make the functions take a dev pointer, and a pointer to a
single struct wrapping all arguments. The set_* should also take
an extack.
Link: https://lore.kernel.org/netdev/20231121152906.2dd5f487@kernel.org/ [1]
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://lore.kernel.org/r/20231213003321.605376-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use strscpy() to implement ethtool_puts().
Functionally the same as ethtool_sprintf() when it's used with two
arguments or with just "%s" format specifier.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Madhuri Sripada <madhuri.sripada@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are multiple ways to query for the carrier state: through
rtnetlink, sysfs, and (possibly) ethtool. Synchronize linkwatch
work before these operations so that we don't have a situation
where userspace queries the carrier state between the driver's
carrier off->on transition and linkwatch running and expects it
to work, when really (at least) TX cannot work until linkwatch
has run.
I previously posted a longer explanation of how this applies to
wireless [1] but with this wireless can simply query the state
before sending data, to ensure the kernel is ready for it.
[1] https://lore.kernel.org/all/346b21d87c69f817ea3c37caceb34f1f56255884.camel@sipsolutions.net/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231204214706.303c62768415.I1caedccae72ee5a45c9085c5eb49c145ce1c0dd5@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As 32bits of dissector->used_keys are exhausted,
increase the size to 64bits.
This is base change for ESP/AH flow dissector patch.
Please find patch and discussions at
https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Tested-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ETHTOOL_GRXFH correctly copies in the full struct ethtool_rxnfc when
FLOW_RSS is set; ETHTOOL_SRXFH needs a similar code path to handle the
FLOW_RSS case so that ethtool can set the flow hash for custom RSS
contexts (if supported by the driver).
The copy code from ETHTOOL_GRXFH has been pulled out in to a helper so
that it can be called in both ETHTOOL_{G,S}RXFH code paths.
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sopass won't be set if wolopt doesn't change. This means the following
will fail to set the correct sopass.
ethtool -s eth0 wol s sopass 11:22:33:44:55:66
ethtool -s eth0 wol s sopass 22:44:55:66:77:88
Make sure we call into the driver layer set_wol if sopass is different.
Fixes: 55b24334c0 ("ethtool: ioctl: improve error checking for set_wol")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/1686605822-34544-1-git-send-email-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
