Replace @desired_access, @create_disposition, @create_options and
@mode parameters with a single @oparms.
No functional changes.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In preparation to add support for creating special files also via WSL
reparse points in next commits.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Allow the user to create special files and symlinks by choosing
between WSL and NFS reparse points via 'reparse={nfs,wsl}' mount
options. If unset or 'reparse=default', the client will default to
creating them via NFS reparse points.
Creating WSL reparse points isn't supported yet, so simply return
error when attempting to mount with 'reparse=wsl' for now.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a file/dentry has been deleted before closing all its open
handles, currently, closing them can add them to the deferred
close list. This can lead to problems in creating file with the
same name when the file is re-created before the deferred close
completes. This issue was seen while reusing a client's already
existing lease on a file for compound operations and xfstest 591
failed because of the deferred close handle that remained valid
even after the file was deleted and was being reused to create a
file with the same name. The server in this case returns an error
on open with STATUS_DELETE_PENDING. Recreating the file would
fail till the deferred handles are closed (duration specified in
closetimeo).
This patch fixes the issue by flagging all open handles for the
deleted file (file path to be precise) by setting
status_file_deleted to true in the cifsFileInfo structure. As per
the information classes specified in MS-FSCC, SMB2 query info
response from the server has a DeletePending field, set to true
to indicate that deletion has been requested on that file. If
this is the case, flag the open handles for this file too.
When doing close in cifs_close for each of these handles, check the
value of this boolean field and do not defer close these handles
if the corresponding filepath has been deleted.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, when a rename, unlink or set path size compound operation
is requested on a file that has a lot of dirty pages to be written
to the server, we do not send the lease key for these requests. As a
result, the server can assume that this request is from a new client, and
send a lease break notification to the same client, on the same
connection. As a response to the lease break, the client can consume
several credits to write the dirty pages to the server. Depending on the
server's credit grant implementation, the server can stop granting more
credits to this connection, and this can cause a deadlock (which can only
be resolved when the lease timer on the server expires).
One of the problems here is that the client is sending no lease key,
even if it has a lease for the file. This patch fixes the problem by
reusing the existing lease key on the file for rename, unlink and set path
size compound operations so that the client does not break its own lease.
A very trivial example could be a set of commands by a client that
maintains open handle (for write) to a file and then tries to copy the
contents of that file to another one, eg.,
tail -f /dev/null > myfile &
mv myfile myfile2
Presently, the network capture on the client shows that the move (or
rename) would trigger a lease break on the same client, for the same file.
With the lease key reused, the lease break request-response overhead is
eliminated, thereby reducing the roundtrips performed for this set of
operations.
The patch fixes the bug described above and also provides perf benefit.
Signed-off-by: Meetakshi Setiya <msetiya@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There are cases where a session is disconnected and password has changed
on the server (or expired) for this user and this currently can not
be fixed without unmount and mounting again. This patch allows
remount to change the password (for the non Kerberos case, Kerberos
ticket refresh is handled differently) when the session is disconnected
and the user can not reconnect due to still using old password.
Future patches should also allow us to setup the keyring (cifscreds)
to have an "alternate password" so we would be able to change
the password before the session drops (without the risk of races
between when the password changes and the disconnect occurs -
ie cases where the old password is still needed because the new
password has not fully rolled out to all servers yet).
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
File open requests made to the server contain a
CreateGuid, which is used by the server to identify
the open request. If the same request needs to be
replayed, it needs to be sent with the same CreateGuid
in the durable handle v2 context.
Without doing so, we could end up leaking handles on
the server when:
1. multichannel is used AND
2. connection goes down, but not for all channels
This is because the replayed open request would have a
new CreateGuid and the server will treat this as a new
request and open a new handle.
This change fixes this by reusing the existing create_guid
stored in the cached fid struct.
REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With the introduction of SMB2_OP_QUERY_WSL_EA, the client may now send
5 commands in a single compound request in order to query xattrs from
potential WSL reparse points, which should be fine as we currently
allow up to 5 PDUs in a single compound request. However, if
encryption is enabled (e.g. 'seal' mount option) or enforced by the
server, current MAX_COMPOUND(5) won't be enough as we require an extra
PDU for the transform header.
Fix this by increasing MAX_COMPOUND to 7 and, while we're at it, add
an WARN_ON_ONCE() and return -EIO instead of -ENOMEM in case we
attempt to send a compound request that couldn't include the extra
transform header.
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Following a successful cifs_tree_connect, we have the code
to scale up/down the number of channels in the session.
However, it is not protected by a lock today.
As a result, this code can be executed by several processes
that select the same channel. The core functions handle this
well, as they pick chan_lock. However, we've seen cases where
smb2_reconnect throws some warnings.
To fix that, this change introduces a flags bitmap inside the
cifs_ses structure. A new flag type is used to ensure that
only one process enters this section at any time.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Similar to the rest of the commands, this is a change
to add replay flags on retry. This one does not add a
back-off, considering that we may want to flush a write
ASAP to the server. Considering that this will be a
flush of cached pages, the retrans value is also not
honoured.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MS-SMB2 states that the header flag SMB2_FLAGS_REPLAY_OPERATION
needs to be set when a command needs to be retried, so that
the server is aware that this is a replay for an operation that
appeared before.
This can be very important, for example, for state changing
operations and opens which get retried following a reconnect;
since the client maybe unaware of the status of the previous
open.
This is particularly important for multichannel scenario, since
disconnection of one connection does not mean that the session
is lost. The requests can be replayed on another channel.
This change also makes use of exponential back-off before replays
and also limits the number of retries to "retrans" mount option
value.
Also, this change does not modify the read/write codepath.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The code to check for replay is not just -EAGAIN. In some
cases, the send request or receive response may result in
network errors, which we're now mapping to -ECONNABORTED.
This change introduces a helper function which checks
if the error returned in one of the above two errors.
And all checks for replays will now use this helper.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use cifsi->netfs_ctx.remote_i_size instead of cifsi->server_eof so that
netfslib can refer to it to.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
We have several places in the code where we treat the
error -EAGAIN very differently. Some code retry for
arbitrary number of times.
Introducing this new mount option named "retrans", so
that all these handlers of -EAGAIN can retry a fixed
number of times. This applies only to soft mounts.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Parse owner/group when creating special files and symlinks under
SMB3.1.1 POSIX mounts.
Move the parsing of owner/group to smb2_compound_op() so we don't have
to duplicate it in both smb2_get_reparse_inode() and
smb311_posix_query_path_info().
Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In analyzing problems, one missing piece of debug data is when the
mount occurred. A related problem is when collecting stats we don't
know the period of time the stats covered, ie when this set of stats
for the tcon started to be collected. To make debugging easier track
the stats begin time. Set it when the mount occurred at mount time,
and reset it to current time whenever stats are reset. For example,
...
1) \\localhost\test
SMBs: 14 since 2024-01-17 22:17:30 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
2) \\localhost\scratch
SMBs: 24 since 2024-01-17 22:16:04 UTC
Bytes read: 0 Bytes written: 0
Open files: 0 total (local), 0 open on server
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
...
Note the time "since ... UTC" is now displayed in /proc/fs/cifs/Stats
for each share that is mounted.
Suggested-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Query dir responses don't provide enough information on reparse points
such as major/minor numbers and symlink targets other than reparse
tags, however we don't need to unconditionally revalidate them only
because they are reparse points. Instead, revalidate them only when
their ctime or reparse tag has changed.
For instance, Windows Server updates ctime of reparse points when
their data have changed.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add support for creating symlinks via IO_REPARSE_TAG_SYMLINK reparse
points in SMB2+.
These are fully supported by most SMB servers and documented in
MS-FSCC. Also have the advantage of requiring fewer roundtrips as
their symlink targets can be parsed directly from CREATE responses on
STATUS_STOPPED_ON_SYMLINK errors.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311260838.nx5mkj1j-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire hardlink operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The client was sending an SMB2_CREATE request without setting
OPEN_REPARSE_POINT flag thus failing the entire rename operation.
Fix this by setting OPEN_REPARSE_POINT in create options for
SMB2_CREATE request when the source inode is a repase point.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reduce number of roundtrips to server when querying reparse points in
->query_path_info() by sending a single compound request of
create+get_reparse+get_info+close.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make smb2_compound_op() accept up to MAX_COMPOUND(5) commands to be
sent over a single compounded request.
This will allow next commits to read and write reparse files through a
single roundtrip to the server.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
parse_server_interfaces should be in complete charge of maintaining
the iface_list linked list. Today, iface entries are removed
from the list only when the last refcount is dropped.
i.e. in release_iface. However, this can result in undercounting
of refcount if the server stops advertising interfaces (which
Azure SMB server does).
This change puts parse_server_interfaces in full charge of
maintaining the iface_list. So if an empty list is returned
by the server, the entries in the list will immediately be
removed. This way, a following call to the same function will
not find entries in the list.
Fixes: aa45dadd34 ("cifs: change iface_list from array to sorted linked list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Handle all file types in NFS reparse points as specified in MS-FSCC
2.1.2.6 Network File System (NFS) Reparse Data Buffer.
The client is now able to set all file types based on the parsed NFS
reparse point, which used to support only symlinks. This works for
SMB1+.
Before patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
ls: cannot access 'block': Operation not supported
ls: cannot access 'char': Operation not supported
ls: cannot access 'fifo': Operation not supported
ls: cannot access 'sock': Operation not supported
total 1
l????????? ? ? ? ? ? block
l????????? ? ? ? ? ? char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
l????????? ? ? ? ? ? fifo
l--------- 1 root root 0 Nov 18 23:23 link -> f0
l????????? ? ? ? ? ? sock
After patch:
$ mount.cifs //srv/share /mnt -o ...
$ ls -l /mnt
total 1
brwxr-xr-x 1 root root 123, 123 Nov 18 00:34 block
crwxr-xr-x 1 root root 1234, 1234 Nov 18 00:33 char
-rwxr-xr-x 1 root root 5 Nov 18 23:22 f0
prwxr-xr-x 1 root root 0 Nov 18 23:23 fifo
lrwxr-xr-x 1 root root 0 Nov 18 23:23 link -> f0
srwxr-xr-x 1 root root 0 Nov 19 2023 sock
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Parse reparse point into cifs_open_info_data structure and feed it
through cifs_open_info_to_fattr().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a server stops supporting multichannel, we will
keep attempting reconnects to the secondary channels today.
Avoid this by freeing extra channels when negotiate
returns no multichannel support.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Today, if the server interfaces RSS capable, we simply
choose the fastest interface to setup a channel. This is not
a scalable approach, and does not make a lot of attempt to
distribute the connections.
This change does a weighted distribution of channels across
all the available server interfaces, where the weight is
a function of the advertised interface speed.
Also make sure that we don't mix rdma and non-rdma for channels.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
So far, SMB multichannel could only scale up, but not
scale down the number of channels. In this series of
patch, we now allow the client to deal with the case
of multichannel disabled on the server when the share
is mounted. With that change, we now need the ability
to scale down the channels.
This change allows the client to deal with cases of
missing channels more gracefully.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Each smb_rqst struct contains two things: an array of kvecs (rq_iov) that
contains the protocol data for an RPC op and an iterator (rq_iter) that
contains the data payload of an RPC op. When an smb_rqst is allocated
rq_iter is it always cleared, but we don't set it up unless we're going to
use it.
The functions that determines the size of the ciphertext buffer that will
be needed to encrypt a request, cifs_get_num_sgs(), assumes that rq_iter is
always initialised - and employs user_backed_iter() to check that the
iterator isn't user-backed. This used to incidentally work, because
->user_backed was set to false because the iterator has never been
initialised, but with commit f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74[1]
which changes user_backed_iter() to determine this based on the iterator
type insted, a warning is now emitted:
WARNING: CPU: 7 PID: 4584 at fs/smb/client/cifsglob.h:2165 smb2_get_aead_req+0x3fc/0x420 [cifs]
...
RIP: 0010:smb2_get_aead_req+0x3fc/0x420 [cifs]
...
crypt_message+0x33e/0x550 [cifs]
smb3_init_transform_rq+0x27d/0x3f0 [cifs]
smb_send_rqst+0xc7/0x160 [cifs]
compound_send_recv+0x3ca/0x9f0 [cifs]
cifs_send_recv+0x25/0x30 [cifs]
SMB2_tcon+0x38a/0x820 [cifs]
cifs_get_smb_ses+0x69c/0xee0 [cifs]
cifs_mount_get_session+0x76/0x1d0 [cifs]
dfs_mount_share+0x74/0x9d0 [cifs]
cifs_mount+0x6e/0x2e0 [cifs]
cifs_smb3_do_mount+0x143/0x300 [cifs]
smb3_get_tree+0x15e/0x290 [cifs]
vfs_get_tree+0x2d/0xe0
do_new_mount+0x124/0x340
__se_sys_mount+0x143/0x1a0
The problem is that rq_iter was never set, so the type is 0 (ie. ITER_UBUF)
which causes user_backed_iter() to return true. The code doesn't
malfunction because it checks the size of the iterator - which is 0.
Fix cifs_get_num_sgs() to ignore rq_iter if its count is 0, thereby
bypassing the warnings.
It might be better to explicitly initialise rq_iter to a zero-length
ITER_BVEC, say, as it can always be reinitialised later.
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reported-by: Damian Tometzki <damian@riscv-rocks.de>
Closes: https://lore.kernel.org/r/ZUfQo47uo0p2ZsYg@fedora.fritz.box/
Tested-by: Damian Tometzki <damian@riscv-rocks.de>
Cc: stable@vger.kernel.org
cc: Eric Biggers <ebiggers@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=f1b4cb650b9a0eeba206d8f069fcdc532bfbcd74 [1]
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a UAF when xfstests on cifs:
BUG: KASAN: use-after-free in smb2_is_network_name_deleted+0x27/0x160
Read of size 4 at addr ffff88810103fc08 by task cifsd/923
CPU: 1 PID: 923 Comm: cifsd Not tainted 6.1.0-rc4+ #45
...
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report+0x171/0x472
kasan_report+0xad/0x130
kasan_check_range+0x145/0x1a0
smb2_is_network_name_deleted+0x27/0x160
cifs_demultiplex_thread.cold+0x172/0x5a4
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 923:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_slab_alloc+0x54/0x60
kmem_cache_alloc+0x147/0x320
mempool_alloc+0xe1/0x260
cifs_small_buf_get+0x24/0x60
allocate_buffers+0xa1/0x1c0
cifs_demultiplex_thread+0x199/0x10d0
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
Freed by task 921:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x143/0x1b0
kmem_cache_free+0xe3/0x4d0
cifs_small_buf_release+0x29/0x90
SMB2_negotiate+0x8b7/0x1c60
smb2_negotiate+0x51/0x70
cifs_negotiate_protocol+0xf0/0x160
cifs_get_smb_ses+0x5fa/0x13c0
mount_get_conns+0x7a/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The UAF is because:
mount(pid: 921) | cifsd(pid: 923)
-------------------------------|-------------------------------
| cifs_demultiplex_thread
SMB2_negotiate |
cifs_send_recv |
compound_send_recv |
smb_send_rqst |
wait_for_response |
wait_event_state [1] |
| standard_receive3
| cifs_handle_standard
| handle_mid
| mid->resp_buf = buf; [2]
| dequeue_mid [3]
KILL the process [4] |
resp_iov[i].iov_base = buf |
free_rsp_buf [5] |
| is_network_name_deleted [6]
| callback
1. After send request to server, wait the response until
mid->mid_state != SUBMITTED;
2. Receive response from server, and set it to mid;
3. Set the mid state to RECEIVED;
4. Kill the process, the mid state already RECEIVED, get 0;
5. Handle and release the negotiate response;
6. UAF.
It can be easily reproduce with add some delay in [3] - [6].
Only sync call has the problem since async call's callback is
executed in cifsd process.
Add an extra state to mark the mid state to READY before wakeup the
waitter, then it can get the resp safely.
Fixes: ec637e3ffb ("[CIFS] Avoid extra large buffer allocation (and memcpy) in cifs_readpages")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
disabled
When no directory lease support, or for IPC shares where directories
can not be opened, do not start an unneeded laundromat thread for
that mount (it wastes resources).
Fixes: d14de8067e ("cifs: Add a laundromat thread for cached directories")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Allow adjusting the maximum number of cached directories per share
(defaults to 16) via mount parm "max_cached_dirs"
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently with directory leases we cache directory contents for a fixed period
of time (default 30 seconds) but for many workloads this is too short. Allow
configuring the maximum amount of time directory entries are cached when a
directory lease is held on that directory. Add module load parm "max_dir_cache"
For example to set the timeout to 10 minutes you would do:
echo 600 > /sys/module/cifs/parameters/dir_cache_timeout
or to disable caching directory contents:
echo 0 > /sys/module/cifs/parameters/dir_cache_timeout
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since older dialects such as CIFS do not support multichannel
the macro CIFS_SERVER_IS_CHAN can be confusing (it requires SMB 3
or later) so shorten its name to "SERVER_IS_CHAN"
Suggested-by: Tom Talpey <tom@talpey.com>
Acked-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The ChannelSequence field in the SMB3 header is supposed to be
increased after reconnect to allow the server to distinguish
requests from before and after the reconnect. We had always
been setting it to zero. There are cases where incrementing
ChannelSequence on requests after network reconnects can reduce
the chance of data corruptions.
See MS-SMB2 3.2.4.1 and 3.2.7.1
Signed-off-by: Steve French <stfrench@microsoft.com>
Cc: stable@vger.kernel.org # 5.16+
Clang warns about exceeded stack frame size
fs/smb/client/smb2ops.c:1080:1: warning: stack frame size (1432)
exceeds limit (1024) in 'smb2_set_ea' [-Wframe-larger-than]
Fix this by allocating a structure that will hold most of the large
variables.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Save a roundtrip by getting the reparse point tag and buffer at once
in ->query_reparse_point() and then pass the buffer down to
->query_symlink().
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Check for reparse point flag on query info calls as specified in
MS-SMB2 2.2.14.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Instead of passing @adjust_tz and some reparse point related fields as
parameters in ->query_path_info() and
{smb311_posix,cifs}_info_to_fattr() calls, move them to
cifs_open_info_data structure as they can be easily accessed through
@data.
No functional changes.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
With current implementation, when a nested DFS link is found during
mount(2), the client follows the referral and then try to connect to
all of its targets. If all targets failed, the client bails out
rather than retrying remaining targets from previous referral.
Fix this by stacking all referrals and targets so the client can retry
remaining targets from previous referrals in case all targets of
current referral have failed.
Thanks to samba, this can be easily tested like below
* Run the following under dfs folder in samba server
$ ln -s "msdfs:srv\\bad-share" link1
$ ln -s "msdfs:srv\\dfs\\link1,srv\\good-share" link0
* Before patch
$ mount.cifs //srv/dfs/link0 /mnt -o ...
mount error(2): No such file or directory
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)...
* After patch
$ mount.cifs //srv/dfs/link0 /mnt -o ...
# ls /mnt
bar fileshare1 sub
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We need to specify charset, like "iocharset=utf-8", in mount options for
Chinese path if the nls_default don't support it, such as iso8859-1, the
default value for CONFIG_NLS_DEFAULT.
But now in reconnection the nls_default is used, instead of the one we
specified and used in mount, and this can lead to mount failure.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, is_network_name_deleted and it's implementations
do not return anything if the network name did get deleted.
So the function doesn't fully achieve what it advertizes.
Changed the function to return a bool instead. It will now
return true if the error returned is STATUS_NETWORK_NAME_DELETED
and the share (tree id) was found to be connected. It returns
false otherwise.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync
and are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type
checking, forcing the use of pointers
-----BEGIN PGP SIGNATURE-----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=S/he
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are cleanups for architecture specific header files:
- the comments in include/linux/syscalls.h have gone out of sync and
are really pointless, so these get removed
- The asm/bitsperlong.h header no longer needs to be architecture
specific on modern compilers, so use a generic version for newer
architectures that use new enough userspace compilers
- A cleanup for virt_to_pfn/virt_to_bus to have proper type checking,
forcing the use of pointers"
* tag 'asm-generic-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
syscalls: Remove file path comments from headers
tools arch: Remove uapi bitsperlong.h of hexagon and microblaze
asm-generic: Unify uapi bitsperlong.h for arm64, riscv and loongarch
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
When having two DFS root mounts that are connected to same namespace,
same mount options but different prefix paths, we can't really use the
shared @server->origin_fullpath when chasing DFS links in them.
Move the origin_fullpath field to cifs_tcon structure so when having
shared DFS root mounts with different prefix paths, and we need to
chase any DFS links, dfs_get_automount_devname() will pick up the
correct full path out of the @tcon that will be used for the new
mount.
Before patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server, ses, tcon
# server: origin_fullpath=//dom/dfs/dir
# @server->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
ls: cannot open directory '/mnt/2/dir/link1': No such file or directory
After patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server & ses
# tcon_1: origin_fullpath=//dom/dfs/dir
# tcon_2: origin_fullpath=//dom/dfs
# @tcon_2->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
dir0 dir1 dir10 dir3 dir5 dir6 dir7 dir9 target2_file.txt tsub
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
iface_cmp used to simply do a memcmp of the two
provided struct sockaddrs. The comparison needs to do more
based on the address family. Similar logic was already
present in cifs_match_ipaddr. Doing something similar now.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
and pfn_to_virt().
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry, we do the same with pfn_to_virt().
The problem with this inconsistent typing was pointed out by
Russell King:
https://lore.kernel.org/linux-arm-kernel/YoJDKJXc0MJ2QZTb@shell.armlinux.org.uk/
And confirmed by Andrew Morton:
https://lore.kernel.org/linux-mm/20220701160004.2ffff4e5ab59a55499f4c736@linux-foundation.org/
So the recognition of the problem is widespread.
These platforms have been chosen as initial conversion targets:
- ARM
- ARM64/Aarch64
- asm-generic (including for example x86)
- m68k
The idea is that if this goes in, it will block further misuse
of the function signatures due to the large compile coverage,
and then I can go in and fix the remaining architectures on a
one-by-one basis.
Some of the patches have been circulated before but were not
picked up by subsystem maintainers, so now the arch tree is
target for this series.
It has passed zeroday builds after a lot of iterations in my
personal tree, but there could be some randconfig outliers.
New added or deeply hidden problems appear all the time so
some minor fallout can be expected.
-----BEGIN PGP SIGNATURE-----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=7T6L
-----END PGP SIGNATURE-----
Merge tag 'virt-to-pfn-for-arch-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into asm-generic
This is an attempt to harden the typing on virt_to_pfn()
and pfn_to_virt().
Making virt_to_pfn() a static inline taking a strongly typed
(const void *) makes the contract of a passing a pointer of that
type to the function explicit and exposes any misuse of the
macro virt_to_pfn() acting polymorphic and accepting many types
such as (void *), (unitptr_t) or (unsigned long) as arguments
without warnings.
For symmetry, we do the same with pfn_to_virt().
The problem with this inconsistent typing was pointed out by
Russell King:
https://lore.kernel.org/linux-arm-kernel/YoJDKJXc0MJ2QZTb@shell.armlinux.org.uk/
And confirmed by Andrew Morton:
https://lore.kernel.org/linux-mm/20220701160004.2ffff4e5ab59a55499f4c736@linux-foundation.org/
So the recognition of the problem is widespread.
These platforms have been chosen as initial conversion targets:
- ARM
- ARM64/Aarch64
- asm-generic (including for example x86)
- m68k
The idea is that if this goes in, it will block further misuse
of the function signatures due to the large compile coverage,
and then I can go in and fix the remaining architectures on a
one-by-one basis.
Some of the patches have been circulated before but were not
picked up by subsystem maintainers, so now the arch tree is
target for this series.
It has passed zeroday builds after a lot of iterations in my
personal tree, but there could be some randconfig outliers.
New added or deeply hidden problems appear all the time so
some minor fallout can be expected.
* tag 'virt-to-pfn-for-arch-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
m68k/mm: Make pfn accessors static inlines
arm64: memory: Make virt_to_pfn() a static inline
ARM: mm: Make virt_to_pfn() a static inline
asm-generic/page.h: Make pfn accessors static inlines
xen/netback: Pass (void *) to virt_to_page()
netfs: Pass a pointer to virt_to_page()
cifs: Pass a pointer to virt_to_page() in cifsglob
cifs: Pass a pointer to virt_to_page()
riscv: mm: init: Pass a pointer to virt_to_page()
ARC: init: Pass a pointer to virt_to_pfn() in init
m68k: Pass a pointer to virt_to_pfn() virt_to_page()
fs/proc/kcore.c: Pass a pointer to virt_addr_valid()
Move CIFS/SMB3 related client and server files (cifs.ko and ksmbd.ko
and helper modules) to new fs/smb subdirectory:
fs/cifs --> fs/smb/client
fs/ksmbd --> fs/smb/server
fs/smbfs_common --> fs/smb/common
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
