Exclusive table walks are the only supported table walk in the hyp, as
there is no construct like RCU available in the hypervisor code. Reject
any attempt to do a shared table walk by returning an error and allowing
the caller to clean up the mess.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118182222.3932898-4-oliver.upton@linux.dev
Rather than passing through the state of the KVM_PGTABLE_WALK_SHARED
flag, just take a pointer to the whole walker structure instead. Move
around struct kvm_pgtable and the RCU indirection such that the
associated ifdeffery remains in one place while ensuring the walker +
flags definitions precede their use.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221118182222.3932898-2-oliver.upton@linux.dev
Mapping pages in a guest page-table from within the pKVM hypervisor at
EL2 may require cache maintenance to ensure that the initialised page
contents is visible even to non-cacheable (e.g. MMU-off) accesses from
the guest.
In preparation for performing this maintenance at EL2, introduce a
per-vCPU fixmap which allows the pKVM hypervisor to map guest pages
temporarily into its stage-1 page-table for the purposes of cache
maintenance and, in future, poisoning on the reclaim path. The use of a
fixmap avoids the need for memory allocation or locking on the map()
path.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-15-will@kernel.org
Introduce a global table (and lock) to track pKVM instances at EL2, and
provide hypercalls that can be used by the untrusted host to create and
destroy pKVM VMs and their vCPUs. pKVM VM/vCPU state is directly
accessible only by the trusted hypervisor (EL2).
Each pKVM VM is directly associated with an untrusted host KVM instance,
and is referenced by the host using an opaque handle. Future patches
will provide hypercalls to allow the host to initialize/set/get pKVM
VM/vCPU state using the opaque handle.
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Co-developed-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
[maz: silence warning on unmap_donated_memory_noclear()]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-13-will@kernel.org
The stage-2 map walker has been made parallel-aware, and as such can be
called while only holding the read side of the MMU lock. Rip out the
conditional locking in user_mem_abort() and instead grab the read lock.
Continue to take the write lock from other callsites to
kvm_pgtable_stage2_map().
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107220033.1895655-1-oliver.upton@linux.dev
stage2_map_walker_try_leaf() and friends now handle stage-2 PTEs
generically, and perform the correct flush when a table PTE is removed.
Additionally, they've been made parallel-aware, using an atomic break
to take ownership of the PTE.
Stop clearing the PTE in the pre-order callback and instead let
stage2_map_walker_try_leaf() deal with it.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107220006.1895572-1-oliver.upton@linux.dev
Convert stage2_map_walker_try_leaf() to use the new break-before-make
helpers, thereby making the handler parallel-aware. As before, avoid the
break-before-make if recreating the existing mapping. Additionally,
retry execution if another vCPU thread is modifying the same PTE.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215934.1895478-1-oliver.upton@linux.dev
In order to service stage-2 faults in parallel, stage-2 table walkers
must take exclusive ownership of the PTE being worked on. An additional
requirement of the architecture is that software must perform a
'break-before-make' operation when changing the block size used for
mapping memory.
Roll these two concepts together into helpers for performing a
'break-before-make' sequence. Use a special PTE value to indicate a PTE
has been locked by a software walker. Additionally, use an atomic
compare-exchange to 'break' the PTE when the stage-2 page tables are
possibly shared with another software walker. Elide the DSB + TLBI if
the evicted PTE was invalid (and thus not subject to break-before-make).
All of the atomics do nothing for now, as the stage-2 walker isn't fully
ready to perform parallel walks.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215855.1895367-1-oliver.upton@linux.dev
Create a helper to initialize a table and directly call
smp_store_release() to install it (for now). Prepare for a subsequent
change that generalizes PTE writes with a helper.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-11-oliver.upton@linux.dev
The stage2 attr walker is already used for parallel walks. Since commit
f783ef1c0e ("KVM: arm64: Add fast path to handle permission relaxation
during dirty logging"), KVM acquires the read lock when
write-unprotecting a PTE. However, the walker only uses a simple store
to update the PTE. This is safe as the only possible race is with
hardware updates to the access flag, which is benign.
However, a subsequent change to KVM will allow more changes to the stage
2 page tables to be done in parallel. Prepare the stage 2 attribute
walker by performing atomic updates to the PTE when walking in parallel.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-10-oliver.upton@linux.dev
Use RCU to safely walk the stage-2 page tables in parallel. Acquire and
release the RCU read lock when traversing the page tables. Defer the
freeing of table memory to an RCU callback. Indirect the calls into RCU
and provide stubs for hypervisor code, as RCU is not available in such a
context.
The RCU protection doesn't amount to much at the moment, as readers are
already protected by the read-write lock (all walkers that free table
memory take the write lock). Nonetheless, a subsequent change will
futher relax the locking requirements around the stage-2 MMU, thereby
depending on RCU.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-9-oliver.upton@linux.dev
The break-before-make sequence is a bit annoying as it opens a window
wherein memory is unmapped from the guest. KVM should replace the PTE
as quickly as possible and avoid unnecessary work in between.
Presently, the stage-2 map walker tears down a removed table before
installing a block mapping when coalescing a table into a block. As the
removed table is no longer visible to hardware walkers after the
DSB+TLBI, it is possible to move the remaining cleanup to happen after
installing the new PTE.
Reshuffle the stage-2 map walker to install the new block entry in
the pre-order callback. Unwire all of the teardown logic and replace
it with a call to kvm_pgtable_stage2_free_removed() after fixing
the PTE. The post-order visitor is now completely unnecessary, so drop
it. Finally, touch up the comments to better represent the now
simplified map walker.
Note that the call to tear down the unlinked stage-2 is indirected
as a subsequent change will use an RCU callback to trigger tear down.
RCU is not available to pKVM, so there is a need to use different
implementations on pKVM and non-pKVM VMs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-8-oliver.upton@linux.dev
Use an opaque type for pteps and require visitors explicitly dereference
the pointer before using. Protecting page table memory with RCU requires
that KVM dereferences RCU-annotated pointers before using. However, RCU
is not available for use in the nVHE hypervisor and the opaque type can
be conditionally annotated with RCU for the stage-2 MMU.
Call the type a 'pteref' to avoid a naming collision with raw pteps. No
functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-7-oliver.upton@linux.dev
A subsequent change to KVM will move the tear down of an unlinked
stage-2 subtree out of the critical path of the break-before-make
sequence.
Introduce a new helper for tearing down unlinked stage-2 subtrees.
Leverage the existing stage-2 free walkers to do so, with a deep call
into __kvm_pgtable_walk() as the subtree is no longer reachable from the
root.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-6-oliver.upton@linux.dev
In order to tear down page tables from outside the context of
kvm_pgtable (such as an RCU callback), stop passing a pointer through
kvm_pgtable_walk_data.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-5-oliver.upton@linux.dev
As a prerequisite for getting visitors off of struct kvm_pgtable, pass
mm_ops through the visitor context.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-4-oliver.upton@linux.dev
Rather than reading the ptep all over the shop, read the ptep once from
__kvm_pgtable_visit() and stick it in the visitor context. Reread the
ptep after visiting a leaf in case the callback installed a new table
underneath.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-3-oliver.upton@linux.dev
Passing new arguments by value to the visitor callbacks is extremely
inflexible for stuffing new parameters used by only some of the
visitors. Use a context structure instead and pass the pointer through
to the visitor callback.
While at it, redefine the 'flags' parameter to the visitor to contain
the bit indicating the phase of the walk. Pass the entire set of flags
through the context structure such that the walker can communicate
additional state to the visitor callback.
No functional change intended.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Ben Gardon <bgardon@google.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221107215644.1895162-2-oliver.upton@linux.dev
Normally we include the full register name in the defines for fields within
registers but this has not been followed for ID registers. In preparation
for automatic generation of defines add the _EL1s into the defines for
ID_AA64MMFR0_EL1 to follow the convention. No functional changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20220905225425.1871461-5-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CMOs issued from EL2 cannot directly use the kernel helpers,
as EL2 doesn't have a mapping of the guest pages. Oops.
Instead, use the mm_ops indirection to use helpers that will
perform a mapping at EL2 and allow the CMO to be effective.
Fixes: 25aa28691b ("KVM: arm64: Move guest CMOs to the fault handlers")
Reviewed-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220114125038.1336965-1-maz@kernel.org
Ganapatrao reported that the kvm_pgtable->mmu pointer is more or
less hardcoded to the main S2 mmu structure, while the nested
code needs it to point to other instances (as we have one instance
per nested context).
Rework the initialisation of the kvm_pgtable structure so that
this assumtion doesn't hold true anymore. This requires some
minor changes to the order in which things are initialised
(the mmu->arch pointer being the critical one).
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211129200150.351436-5-maz@kernel.org
Implement kvm_pgtable_hyp_unmap() which can be used to remove hypervisor
stage-1 mappings at EL2.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-6-qperret@google.com
To prepare the ground for allowing hyp stage-1 mappings to be removed at
run-time, update the KVM page-table code to maintain a correct refcount
using the ->{get,put}_page() function callbacks.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-3-qperret@google.com
Introduce helper functions in the KVM stage-2 and stage-1 page-table
manipulation library allowing to retrieve the enum kvm_pgtable_prot of a
PTE. This will be useful to implement custom walkers outside of
pgtable.c.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-17-qperret@google.com
Introduce infrastructure allowing to manipulate software bits in stage-1
and stage-2 page-tables using additional entries in the kvm_pgtable_prot
enum.
This is heavily inspired by Marc's implementation of a similar feature
in the NV patch series, but adapted to allow stage-1 changes as well:
https://lore.kernel.org/kvmarm/20210510165920.1913477-56-maz@kernel.org/
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-12-qperret@google.com
Much of the stage-2 manipulation logic relies on being able to destroy
block mappings if e.g. installing a smaller mapping in the range. The
rationale for this behaviour is that stage-2 mappings can always be
re-created lazily. However, this gets more complicated when the stage-2
page-table is used to store metadata about the underlying pages. In such
cases, destroying a block mapping may lead to losing part of the state,
and confuse the user of those metadata (such as the hypervisor in nVHE
protected mode).
To avoid this, introduce a callback function in the pgtable struct which
is called during all map operations to determine whether the mappings
can use blocks, or should be forced to page granularity. This is used by
the hypervisor when creating the host stage-2 to force page-level
mappings when using non-default protection attributes.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-11-qperret@google.com
The current hypervisor stage-1 mapping code doesn't allow changing an
existing valid mapping. Relax this condition by allowing changes that
only target software bits, as that will soon be needed to annotate shared
pages.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-10-qperret@google.com
We will soon start annotating page-tables with new flags to track shared
pages and such, and we will do so in valid mappings using software bits
in the PTEs, as provided by the architecture. However, it is possible
that we will need to use those flags to annotate invalid mappings as
well in the future, similar to what we do to track page ownership in the
host stage-2.
In order to facilitate the annotation of invalid mappings with such
flags, it would be preferable to re-use the same bits as for valid
mappings (bits [58-55]), but these are currently used for ownership
encoding. Since we have plenty of bits left to use in invalid
mappings, move the ownership bits further down the PTE to avoid the
conflict.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-9-qperret@google.com
The ignored bits for both stage-1 and stage-2 page and block
descriptors are in [55:58], so rename KVM_PTE_LEAF_ATTR_S2_IGNORED to
make it applicable to both. And while at it, since these bits are more
commonly known as 'software' bits, rename accordingly.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-8-qperret@google.com
The kvm_pgtable_stage2_find_range() function is used in the host memory
abort path to try and look for the largest block mapping that can be
used to map the faulting address. In order to do so, the function
currently walks the stage-2 page-table and looks for existing
incompatible mappings within the range of the largest possible block.
If incompatible mappings are found, it tries the same procedure again,
but using a smaller block range, and repeats until a matching range is
found (potentially up to page granularity). While this approach has
benefits (mostly in the fact that it proactively coalesces host stage-2
mappings), it can be slow if the ranges are fragmented, and it isn't
optimized to deal with CPUs faulting on the same IPA as all of them will
do all the work every time.
To avoid these issues, remove kvm_pgtable_stage2_find_range(), and walk
the page-table only once in the host_mem_abort() path to find the
closest leaf to the input address. With this, use the corresponding
range if it is invalid and not owned by another entity. If a valid leaf
is found, return -EAGAIN similar to what is done in the
kvm_pgtable_stage2_map() path to optimize concurrent faults.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-7-qperret@google.com
The KVM pgtable API exposes the kvm_pgtable_walk() function to allow
the definition of walkers outside of pgtable.c. However, it is not easy
to implement any of those walkers without some of the low-level helpers.
Move some of them to the header file to allow re-use from other places.
Signed-off-by: Quentin Perret <qperret@google.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210809152448.1810400-6-qperret@google.com
It is becoming a common need to fetch the PTE for a given address
together with its level. Add such a helper.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210726153552.1535838-2-maz@kernel.org
arm64 cache management function cleanup from Fuad Tabba,
shared with the arm64 tree.
* arm64/for-next/caches:
arm64: Rename arm64-internal cache maintenance functions
arm64: Fix cache maintenance function comments
arm64: sync_icache_aliases to take end parameter instead of size
arm64: __clean_dcache_area_pou to take end parameter instead of size
arm64: __clean_dcache_area_pop to take end parameter instead of size
arm64: __clean_dcache_area_poc to take end parameter instead of size
arm64: __flush_dcache_area to take end parameter instead of size
arm64: dcache_by_line_op to take end parameter instead of size
arm64: __inval_dcache_area to take end parameter instead of size
arm64: Fix comments to refer to correct function __flush_icache_range
arm64: Move documentation of dcache_by_line_op
arm64: assembler: remove user_alt
arm64: Downgrade flush_icache_range to invalidate
arm64: Do not enable uaccess for invalidate_icache_range
arm64: Do not enable uaccess for flush_icache_range
arm64: Apply errata to swsusp_arch_suspend_exit
arm64: assembler: add conditional cache fixups
arm64: assembler: replace `kaddr` with `addr`
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently uniformly perform CMOs of D-cache and I-cache in function
user_mem_abort before calling the fault handlers. If we get concurrent
guest faults(e.g. translation faults, permission faults) or some really
unnecessary guest faults caused by BBM, CMOs for the first vcpu are
necessary while the others later are not.
By moving CMOs to the fault handlers, we can easily identify conditions
where they are really needed and avoid the unnecessary ones. As it's a
time consuming process to perform CMOs especially when flushing a block
range, so this solution reduces much load of kvm and improve efficiency
of the stage-2 page table code.
We can imagine two specific scenarios which will gain much benefit:
1) In a normal VM startup, this solution will improve the efficiency of
handling guest page faults incurred by vCPUs, when initially populating
stage-2 page tables.
2) After live migration, the heavy workload will be resumed on the
destination VM, however all the stage-2 page tables need to be rebuilt
at the moment. So this solution will ease the performance drop during
resuming stage.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-5-wangyanan55@huawei.com
Also add a mm_ops member for structure stage2_attr_data, since we
will move I-cache maintenance for guest stage-2 to the permission
path and as a result will need mm_ops for some callbacks.
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-3-wangyanan55@huawei.com
Although naming across the codebase isn't that consistent, it
tends to follow certain patterns. Moreover, the term "flush"
isn't defined in the Arm Architecture reference manual, and might
be interpreted to mean clean, invalidate, or both for a cache.
Rename arm64-internal functions to make the naming internally
consistent, as well as making it consistent with the Arm ARM, by
specifying whether it applies to the instruction, data, or both
caches, whether the operation is a clean, invalidate, or both.
Also specify which point the operation applies to, i.e., to the
point of unification (PoU), coherency (PoC), or persistence
(PoP).
This commit applies the following sed transformation to all files
under arch/arm64:
"s/\b__flush_cache_range\b/caches_clean_inval_pou_macro/g;"\
"s/\b__flush_icache_range\b/caches_clean_inval_pou/g;"\
"s/\binvalidate_icache_range\b/icache_inval_pou/g;"\
"s/\b__flush_dcache_area\b/dcache_clean_inval_poc/g;"\
"s/\b__inval_dcache_area\b/dcache_inval_poc/g;"\
"s/__clean_dcache_area_poc\b/dcache_clean_poc/g;"\
"s/\b__clean_dcache_area_pop\b/dcache_clean_pop/g;"\
"s/\b__clean_dcache_area_pou\b/dcache_clean_pou/g;"\
"s/\b__flush_cache_user_range\b/caches_clean_inval_user_pou/g;"\
"s/\b__flush_icache_all\b/icache_inval_all_pou/g;"
Note that __clean_dcache_area_poc is deliberately missing a word
boundary check at the beginning in order to match the efistub
symbols in image-vars.h.
Also note that, despite its name, __flush_icache_range operates
on both instruction and data caches. The name change here
reflects that.
No functional change intended.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-19-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
To be consistent with other functions with similar names and
functionality in cacheflush.h, cache.S, and cachetlb.rst, change
to specify the range in terms of start and end, as opposed to
start and size.
No functional change intended.
Reported-by: Will Deacon <will@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20210524083001.2586635-13-tabba@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Introduce a new stage 2 configuration flag to specify that all mappings
in a given page-table will be identity-mapped, as will be the case for
the host. This allows to introduce sanity checks in the map path and to
avoid programming errors.
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-34-qperret@google.com
In order to further configure stage 2 page-tables, pass flags to the
init function using a new enum.
The first of these flags allows to disable FWB even if the hardware
supports it as we will need to do so for the host stage 2.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-33-qperret@google.com
Since the host stage 2 will be identity mapped, and since it will own
most of memory, it would preferable for performance to try and use large
block mappings whenever that is possible. To ease this, introduce a new
helper in the KVM page-table code which allows to search for large
ranges of available IPA space. This will be used in the host memory
abort path to greedily idmap large portion of the PA space.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-32-qperret@google.com
In order to ease their re-use in other code paths, refactor the
*_map_set_prot_attr() helpers to not depend on a map_data struct.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-31-qperret@google.com
As the host stage 2 will be identity mapped, all the .hyp memory regions
and/or memory pages donated to protected guestis will have to marked
invalid in the host stage 2 page-table. At the same time, the hypervisor
will need a way to track the ownership of each physical page to ensure
memory sharing or donation between entities (host, guests, hypervisor) is
legal.
In order to enable this tracking at EL2, let's use the host stage 2
page-table itself. The idea is to use the top bits of invalid mappings
to store the unique identifier of the page owner. The page-table owner
(the host) gets identifier 0 such that, at boot time, it owns the entire
IPA space as the pgd starts zeroed.
Provide kvm_pgtable_stage2_set_owner() which allows to modify the
ownership of pages in the host stage 2. It re-uses most of the map()
logic, but ends up creating invalid mappings instead. This impacts
how we do refcount as we now need to count invalid mappings when they
are used for ownership tracking.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-30-qperret@google.com
kvm_set_invalid_pte() currently only clears bit 0 from a PTE because
stage2_map_walk_table_post() needs to be able to follow the anchor. In
preparation for re-using bits 63-01 from invalid PTEs, make sure to zero
it entirely by ensuring to cache the anchor's child upfront.
Acked-by: Will Deacon <will@kernel.org>
Suggested-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-29-qperret@google.com
The current stage2 page-table allocator uses a memcache to get
pre-allocated pages when it needs any. To allow re-using this code at
EL2 which uses a concept of memory pools, make the memcache argument of
kvm_pgtable_stage2_map() anonymous, and let the mm_ops zalloc_page()
callbacks use it the way they need to.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-26-qperret@google.com
In order to re-use some of the stage 2 setup code at EL2, factor parts
of kvm_arm_setup_stage2() out into separate functions.
No functional change intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-23-qperret@google.com
In order to make use of the stage 2 pgtable code for the host stage 2,
use struct kvm_arch in lieu of struct kvm as the host will have the
former but not the latter.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-20-qperret@google.com
When memory protection is enabled, the EL2 code needs the ability to
create and manage its own page-table. To do so, introduce a new set of
hypercalls to bootstrap a memory management system at EL2.
This leads to the following boot flow in nVHE Protected mode:
1. the host allocates memory for the hypervisor very early on, using
the memblock API;
2. the host creates a set of stage 1 page-table for EL2, installs the
EL2 vectors, and issues the __pkvm_init hypercall;
3. during __pkvm_init, the hypervisor re-creates its stage 1 page-table
and stores it in the memory pool provided by the host;
4. the hypervisor then extends its stage 1 mappings to include a
vmemmap in the EL2 VA space, hence allowing to use the buddy
allocator introduced in a previous patch;
5. the hypervisor jumps back in the idmap page, switches from the
host-provided page-table to the new one, and wraps up its
initialization by enabling the new allocator, before returning to
the host.
6. the host can free the now unused page-table created for EL2, and
will now need to issue hypercalls to make changes to the EL2 stage 1
mappings instead of modifying them directly.
Note that for the sake of simplifying the review, this patch focuses on
the hypervisor side of things. In other words, this only implements the
new hypercalls, but does not make use of them from the host yet. The
host-side changes will follow in a subsequent patch.
Credits to Will for __pkvm_init_switch_pgd.
Acked-by: Will Deacon <will@kernel.org>
Co-authored-by: Will Deacon <will@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-18-qperret@google.com
In preparation for enabling the creation of page-tables at EL2, factor
all memory allocation out of the page-table code, hence making it
re-usable with any compatible memory allocator.
No functional changes intended.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-7-qperret@google.com
