Reset POR_EL0 to "allow all" before writing the signal frame, preventing
spurious uaccess failures.
When POE is supported, the POR_EL0 register constrains memory
accesses based on the target page's POIndex (pkey). This raises the
question: what constraints should apply to a signal handler? The
current answer is that POR_EL0 is reset to POR_EL0_INIT when
invoking the handler, giving it full access to POIndex 0. This is in
line with x86's MPK support and remains unchanged.
This is only part of the story, though. POR_EL0 constrains all
unprivileged memory accesses, meaning that uaccess routines such as
put_user() are also impacted. As a result POR_EL0 may prevent the
signal frame from being written to the signal stack (ultimately
causing a SIGSEGV). This is especially concerning when an alternate
signal stack is used, because userspace may want to prevent access
to it outside of signal handlers. There is currently no provision
for that: POR_EL0 is reset after writing to the stack, and
POR_EL0_INIT only enables access to POIndex 0.
This patch ensures that POR_EL0 is reset to its most permissive
state before the signal stack is accessed. Once the signal frame has
been fully written, POR_EL0 is still set to POR_EL0_INIT - it is up
to the signal handler to enable access to additional pkeys if
needed. As to sigreturn(), it expects having access to the stack
like any other syscall; we only need to ensure that POR_EL0 is
restored from the signal frame after all uaccess calls. This
approach is in line with the recent x86/pkeys series [1].
Resetting POR_EL0 early introduces some complications, in that we
can no longer read the register directly in preserve_poe_context().
This is addressed by introducing a struct (user_access_state)
and helpers to manage any such register impacting user accesses
(uaccess and accesses in userspace). Things look like this on signal
delivery:
1. Save original POR_EL0 into struct [save_reset_user_access_state()]
2. Set POR_EL0 to "allow all" [save_reset_user_access_state()]
3. Create signal frame
4. Write saved POR_EL0 value to the signal frame [preserve_poe_context()]
5. Finalise signal frame
6. If all operations succeeded:
a. Set POR_EL0 to POR_EL0_INIT [set_handler_user_access_state()]
b. Else reset POR_EL0 to its original value [restore_user_access_state()]
If any step fails when setting up the signal frame, the process will
be sent a SIGSEGV, which it may be able to handle. Step 6.b ensures
that the original POR_EL0 is saved in the signal frame when
delivering that SIGSEGV (so that the original value is restored by
sigreturn).
The return path (sys_rt_sigreturn) doesn't strictly require any change
since restore_poe_context() is already called last. However, to
avoid uaccess calls being accidentally added after that point, we
use the same approach as in the delivery path, i.e. separating
uaccess from writing to the register:
1. Read saved POR_EL0 value from the signal frame [restore_poe_context()]
2. Set POR_EL0 to the saved value [restore_user_access_state()]
[1] https://lore.kernel.org/lkml/20240802061318.2140081-1-aruna.ramakrishna@oracle.com/
Fixes: 9160f7e909 ("arm64: add POE signal support")
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241029144539.111155-2-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Use the new fallback memcpy_{from,to}io and memset_io functions from
lib/iomem_copy.c on the arm64 processor architecture.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Yann Sionneau <ysionneau@kalrayinc.com>
Signed-off-by: Julian Vetter <jvetter@kalrayinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It appears that relatively popular hardware out there implements
the CNTPOFF_EL2 variant of FEAT_ECV, advertises it via ID_AA64MMFR0_EL1,
but cannot be bothered to set SCR_EL3.ECVEn to 1.
You would probably think that "this is fine, EL3 will take the
trap on access to CNTPOFF_EL2 and flip the ECVEn bit", as that's
what a semi-decent firmware implementation would do.
But no. None of that. This particular implementation takes the trap,
considers its purpose in life, decides that it has none, and *RESETS*
the system.
Yes, x1e001de, I'm talking about you.
In order to allow this machine to be promoted slightly above the
level of a glorified door-stop, add a new "id_aa64mmfr0.ecv" override.
allowing the kernel to pretend this option was never there.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241021181434.1052974-1-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Use the memory encryption APIs to trigger a RSI call to request a
transition between protected memory and shared memory (or vice versa)
and updating the kernel's linear map of modified pages to flip the top
bit of the IPA. This requires that block mappings are not used in the
direct map for realm guests.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-10-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Within a realm guest it's not possible for a device emulated by the VMM
to access arbitrary guest memory. So force the use of bounce buffers to
ensure that the memory the emulated devices are accessing is in memory
which is explicitly shared with the host.
This adds a call to swiotlb_update_mem_attributes() which calls
set_memory_decrypted() to ensure the bounce buffer memory is shared with
the host. For non-realm guests or hosts this is a no-op.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-8-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Device mappings need to be emulated by the VMM so must be mapped shared
with the host.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-7-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Instead of marking every MMIO as shared, check if the given region is
"Protected" and apply the permissions accordingly.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-6-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On Arm CCA, with RMM-v1.0, all MMIO regions are shared. However, in
the future, an Arm CCA-v1.0 compliant guest may be run in a lesser
privileged partition in the Realm World (with Arm CCA-v1.1 Planes
feature). In this case, some of the MMIO regions may be emulated
by a higher privileged component in the Realm world, i.e, protected.
Thus the guest must decide today, whether a given MMIO region is shared
vs Protected and create the stage1 mapping accordingly. On Arm CCA, this
detection is based on the "IPA State" (RIPAS == RIPAS_IO). Provide a
helper to run this check on a given range of MMIO.
Also, provide a arm64 helper which may be hooked in by other solutions.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-5-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The top bit of the configured IPA size is used as an attribute to
control whether the address is protected or shared. Query the
configuration from the RMM to assertain which bit this is.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Co-developed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-4-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Detect that the VM is a realm guest by the presence of the RSI
interface. This is done after PSCI has been initialised so that we can
check the SMCCC conduit before making any RSI calls.
If in a realm then iterate over all memory ensuring that it is marked as
RIPAS RAM. The loader is required to do this for us, however if some
memory is missed this will cause the guest to receive a hard to debug
external abort at some random point in the future. So for a
belt-and-braces approach set all memory to RIPAS RAM. Any failure here
implies that the RAM regions passed to Linux are incorrect so panic()
promptly to make the situation clear.
Reviewed-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20241017131434.40935-3-steven.price@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1)
* Correcly expose S1PIE to guests, fixing a regression introduced
in 6.12-rc1 with the S1POE support
* Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
* Address a couple of issues with the vgic when userspace misconfigures
the emulation, resulting in various splats. Headaches courtesy
of our Syzkaller friends
* Stop wasting space in the HYP idmap, as we are dangerously close
to the 4kB limit, and this has already exploded in -next
* Fix another race in vgic_init()
* Fix a UBSAN error when faking the cache topology with MTE
enabled
RISCV:
* RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
* A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
* Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's bounds
* Fix case in which an out-of-date cached value for the segments could
by returned by KVM_GET_SREGS.
* More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
* Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
* Remove a couple of unused functions
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmcVK54UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOfrgf7BRyihd28OGaqVuv2BqGYrxqfOkd6
ZqpJDOy+X7UE3iG5NhTxw4mghCJFhOwIL7gDSZwPLe6D2k01oqPSP2pLMqXb5oOv
/EkltRvzG0YIH3sjZY5PROrMMxnvSKkJKxETFxFQQzMKRym2v/T5LAzrium58YIT
vWZXxo2HTPXOw/U5upAqqMYJMeeJEL3kurVHtOsPytUFjrIOl0BfeKvgjOwonDIh
Awm4JZwk0+1d8sYfkuzsSrTQmtshDCx1jkFN1juirt90s1EwgmOvVKiHo3gMsVP9
veDRoLTx2fM/r7TrhoHo46DTA2vbfmCltWcT0cn5x8P24BFGXXe/IDJIHA==
=IVlI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM64:
- Fix the guest view of the ID registers, making the relevant fields
writable from userspace (affecting ID_AA64DFR0_EL1 and
ID_AA64PFR1_EL1)
- Correcly expose S1PIE to guests, fixing a regression introduced in
6.12-rc1 with the S1POE support
- Fix the recycling of stage-2 shadow MMUs by tracking the context
(are we allowed to block or not) as well as the recycling state
- Address a couple of issues with the vgic when userspace
misconfigures the emulation, resulting in various splats. Headaches
courtesy of our Syzkaller friends
- Stop wasting space in the HYP idmap, as we are dangerously close to
the 4kB limit, and this has already exploded in -next
- Fix another race in vgic_init()
- Fix a UBSAN error when faking the cache topology with MTE enabled
RISCV:
- RISCV: KVM: use raw_spinlock for critical section in imsic
x86:
- A bandaid for lack of XCR0 setup in selftests, which causes trouble
if the compiler is configured to have x86-64-v3 (with AVX) as the
default ISA. Proper XCR0 setup will come in the next merge window.
- Fix an issue where KVM would not ignore low bits of the nested CR3
and potentially leak up to 31 bytes out of the guest memory's
bounds
- Fix case in which an out-of-date cached value for the segments
could by returned by KVM_GET_SREGS.
- More cleanups for KVM_X86_QUIRK_SLOT_ZAP_ALL
- Override MTRR state for KVM confidential guests, making it WB by
default as is already the case for Hyper-V guests.
Generic:
- Remove a couple of unused functions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (27 commits)
RISCV: KVM: use raw_spinlock for critical section in imsic
KVM: selftests: Fix out-of-bounds reads in CPUID test's array lookups
KVM: selftests: x86: Avoid using SSE/AVX instructions
KVM: nSVM: Ignore nCR3[4:0] when loading PDPTEs from memory
KVM: VMX: reset the segment cache after segment init in vmx_vcpu_reset()
KVM: x86: Clean up documentation for KVM_X86_QUIRK_SLOT_ZAP_ALL
KVM: x86/mmu: Add lockdep assert to enforce safe usage of kvm_unmap_gfn_range()
KVM: x86/mmu: Zap only SPs that shadow gPTEs when deleting memslot
x86/kvm: Override default caching mode for SEV-SNP and TDX
KVM: Remove unused kvm_vcpu_gfn_to_pfn_atomic
KVM: Remove unused kvm_vcpu_gfn_to_pfn
KVM: arm64: Ensure vgic_ready() is ordered against MMIO registration
KVM: arm64: vgic: Don't check for vgic_ready() when setting NR_IRQS
KVM: arm64: Fix shift-out-of-bounds bug
KVM: arm64: Shave a few bytes from the EL2 idmap code
KVM: arm64: Don't eagerly teardown the vgic on init error
KVM: arm64: Expose S1PIE to guests
KVM: arm64: nv: Clarify safety of allowing TLBI unmaps to reschedule
KVM: arm64: nv: Punt stage-2 recycling to a vCPU request
KVM: arm64: nv: Do not block when unmapping stage-2 if disallowed
...
We have filled all 64 bits of AT_HWCAP2 so in order to support discovery of
further features provide the framework to use the already defined AT_HWCAP3
for further CPU features.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20241004-arm64-elf-hwcap3-v2-2-799d1daad8b0@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When arm64's stack unwinder encounters an exception boundary, it uses
the pt_regs::stackframe created by the entry code, which has a copy of
the PC and FP at the time the exception was taken. The unwinder doesn't
know anything about pt_regs, and reports the PC from the stackframe, but
does not report the LR.
The LR is only guaranteed to contain the return address at function call
boundaries, and can be used as a scratch register at other times, so the
LR at an exception boundary may or may not be a legitimate return
address. It would be useful to report the LR value regardless, as it can
be helpful when debugging, and in future it will be helpful for reliable
stacktrace support.
This patch changes the way we unwind across exception boundaries,
allowing both the PC and LR to be reported. The entry code creates a
frame_record_meta structure embedded within pt_regs, which the unwinder
uses to find the pt_regs. The unwinder can then extract pt_regs::pc and
pt_regs::lr as two separate unwind steps before continuing with a
regular walk of frame records.
When a PC is unwound from pt_regs::lr, dump_backtrace() will log this
with an "L" marker so that it can be identified easily. For example,
an unwind across an exception boundary will appear as follows:
| el1h_64_irq+0x6c/0x70
| _raw_spin_unlock_irqrestore+0x10/0x60 (P)
| __aarch64_insn_write+0x6c/0x90 (L)
| aarch64_insn_patch_text_nosync+0x28/0x80
... with a (P) entry for pt_regs::pc, and an (L) entry for pt_regs:lr.
Note that the LR may be stale at the point of the exception, for example,
shortly after a return:
| el1h_64_irq+0x6c/0x70
| default_idle_call+0x34/0x180 (P)
| default_idle_call+0x28/0x180 (L)
| do_idle+0x204/0x268
... where the LR points a few instructions before the current PC.
This plays nicely with all the other unwind metadata tracking. With the
ftrace_graph profiler enabled globally, and kretprobes installed on
generic_handle_domain_irq() and do_interrupt_handler(), a backtrace triggered
by magic-sysrq + L reports:
| Call trace:
| show_stack+0x20/0x40 (CF)
| dump_stack_lvl+0x60/0x80 (F)
| dump_stack+0x18/0x28
| nmi_cpu_backtrace+0xfc/0x140
| nmi_trigger_cpumask_backtrace+0x1c8/0x200
| arch_trigger_cpumask_backtrace+0x20/0x40
| sysrq_handle_showallcpus+0x24/0x38 (F)
| __handle_sysrq+0xa8/0x1b0 (F)
| handle_sysrq+0x38/0x50 (F)
| pl011_int+0x460/0x5a8 (F)
| __handle_irq_event_percpu+0x60/0x220 (F)
| handle_irq_event+0x54/0xc0 (F)
| handle_fasteoi_irq+0xa8/0x1d0 (F)
| generic_handle_domain_irq+0x34/0x58 (F)
| gic_handle_irq+0x54/0x140 (FK)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0xa0
| el1_interrupt+0x34/0x68 (FK)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x6c/0x70
| default_idle_call+0x34/0x180 (P)
| default_idle_call+0x28/0x180 (L)
| do_idle+0x204/0x268
| cpu_startup_entry+0x3c/0x50 (F)
| rest_init+0xe4/0xf0
| start_kernel+0x744/0x750
| __primary_switched+0x88/0x98
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-11-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When analysing a stacktrace it can be useful to know whether an unwound
PC has been rewritten by fgraph or kretprobes, as in some situations
these may be suspect or be known to be unreliable.
This patch adds flags to track when an unwind entry has recovered the PC
from fgraph and/or kretprobes, and updates dump_backtrace() to log when
this is the case.
The flags recorded are:
"F" - the PC was recovered from fgraph
"K" - the PC was recovered from kretprobes
These flags are recorded and logged in addition to the original source
of the unwound PC.
For example, with the ftrace_graph profiler enabled globally, and
kretprobes installed on generic_handle_domain_irq() and
do_interrupt_handler(), a backtrace triggered by magic-sysrq + L
reports:
| Call trace:
| show_stack+0x20/0x40 (CF)
| dump_stack_lvl+0x60/0x80 (F)
| dump_stack+0x18/0x28
| nmi_cpu_backtrace+0xfc/0x140
| nmi_trigger_cpumask_backtrace+0x1c8/0x200
| arch_trigger_cpumask_backtrace+0x20/0x40
| sysrq_handle_showallcpus+0x24/0x38 (F)
| __handle_sysrq+0xa8/0x1b0 (F)
| handle_sysrq+0x38/0x50 (F)
| pl011_int+0x460/0x5a8 (F)
| __handle_irq_event_percpu+0x60/0x220 (F)
| handle_irq_event+0x54/0xc0 (F)
| handle_fasteoi_irq+0xa8/0x1d0 (F)
| generic_handle_domain_irq+0x34/0x58 (F)
| gic_handle_irq+0x54/0x140 (FK)
| call_on_irq_stack+0x24/0x58 (F)
| do_interrupt_handler+0x88/0xa0
| el1_interrupt+0x34/0x68 (FK)
| el1h_64_irq_handler+0x18/0x28
| el1h_64_irq+0x64/0x68
| default_idle_call+0x34/0x180
| do_idle+0x204/0x268
| cpu_startup_entry+0x40/0x50 (F)
| rest_init+0xe4/0xf0
| start_kernel+0x744/0x750
| __primary_switched+0x80/0x90
Note that as these flags are reported next to the recovered PC value,
they appear on the callers of instrumented functions. For example
gic_handle_irq() has a "K" marker because generic_handle_domain_irq()
was instrumented with kretprobes and had its return address rewritten.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When analysing a stacktrace it can be useful to know where an unwound PC
came from, as in some situations certain sources may be suspect or known
to be unreliable. In future it would also be useful to track this so
that certain unwind steps can be performed in a stateful manner. For
example when unwinding across an exception boundary, we'd ideally unwind
pt_regs::pc, then pt_regs::lr, then the next frame record.
This patch adds an enumerated set of unwind sources, tracks this during
the unwind, and updates dump_backtrace() to log these for interesting
unwind steps.
The interesting sources recorded are:
"C" - the PC came from the caller of an unwind function.
"T" - the PC came from thread_saved_pc() for a blocked task.
"P" - the PC came from a pt_regs::pc.
"U" - the PC came from an unknown source (indicates an unwinder error).
... with nothing recorded when the PC came from a frame_record::pc as
this is the vastly common case and logging this would make it difficult
to spot the more interesting cases.
For example, when triggering a backtrace via magic-sysrq + L, the CPU
handling the sysrq will have a backtrace whose first element is the
caller (C) of dump_backtrace():
| Call trace:
| show_stack+0x18/0x30 (C)
| dump_stack_lvl+0x60/0x80
| dump_stack+0x18/0x24
| nmi_cpu_backtrace+0xfc/0x140
| ...
... and other CPUs will have a backtrace whose first element is their
pt_regs::pc (P) at the instant the backtrace IPI was taken:
| Call trace:
| _raw_spin_unlock_irqrestore+0x8/0x50 (P)
| wake_up_process+0x18/0x24
| process_timeout+0x14/0x20
| call_timer_fn.isra.0+0x24/0x80
| ...
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently dump_backtrace() can only print the PC value at each step of
the unwind, as this is all the information that arch_stack_walk()
passes to the dump_backtrace_entry() callback.
In future we'd like to print some additional information, such as the
origin of entries (e.g. PC, LR, FP) and/or the reliability thereof.
In preparation for doing so, this patch moves dump_backtrace() over to
kunwind_stack_walk(), which passes the full kunwind_state to the
callback.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently the signal handling code has its own struct frame_record,
the definition of struct pt_regs open-codes a frame record as an array,
and the kernel unwinder hard-codes frame record offsets.
Move to a common struct frame_record that can be used throughout the
kernel.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In subsequent patches we'll want to add an additional u64 to struct
pt_regs. To make space, this patch swaps the 'unused' and 'pmr' fields,
as the 'pmr' value only requires bits[7:0] and can safely fit into a
u32, which frees up a 64-bit unused field.
The 'lockdep_hardirqs' and 'exit_rcu' fields should eventually be moved
out of pt_regs and managed locally within entry-common.c, so I've left
those as-is for the moment.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The pt_regs::pmr_save field is weirdly named relative to all other
pt_regs fields, with a '_save' suffix that doesn't make anything clearer
and only leads to more typing to access the field.
Remove the '_save' suffix.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Puranjay Mohan <puranjay12@gmail.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Madhavan T. Venkataraman <madvenka@linux.microsoft.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241017092538.1859841-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We will soon be using MOPS instructions in the kernel, so wire up the
exception handler to handle exceptions from EL1 caused by the copy/set
operation being stopped and resumed on a different type of CPU.
Add a helper for advancing the single step state machine, similarly to
what the EL0 exception handler does.
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-3-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
FEAT_MOPS instructions require that all three instructions (prologue,
main and epilogue) appear consecutively in memory. Placing a
kprobe/uprobe on one of them doesn't work as only a single instruction
gets executed out-of-line or simulated. So don't allow placing a probe
on a MOPS instruction.
Fixes: b7564127ff ("arm64: mops: detect and enable FEAT_MOPS")
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Link: https://lore.kernel.org/r/20240930161051.3777828-2-kristina.martsenko@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Our idmap is becoming too big, to the point where it doesn't fit in
a 4kB page anymore.
There are some low-hanging fruits though, such as the el2_init_state
horror that is expanded 3 times in the kernel. Let's at least limit
ourselves to two copies, which makes the kernel link again.
At some point, we'll have to have a better way of doing this.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241009204903.GA3353168@thelio-3990X
Enable MTE support for hugetlb.
The MTE page flags will be set on the folio only. When copying
hugetlb folio (for example, CoW), the tags for all subpages will be copied
when copying the first subpage.
When freeing hugetlb folio, the MTE flags will be cleared.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20241001225220.271178-1-yang@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
v2->v1:
1. Remove the simuation of STP and the related bits.
2. Use arm64_skip_faulting_instruction for single-stepping or FEAT_BTI
scenario.
As Andrii pointed out, the uprobe/uretprobe selftest bench run into a
counterintuitive result that nop and push variants are much slower than
ret variant [0]. The root cause lies in the arch_probe_analyse_insn(),
which excludes 'nop' and 'stp' from the emulatable instructions list.
This force the kernel returns to userspace and execute them out-of-line,
then trapping back to kernel for running uprobe callback functions. This
leads to a significant performance overhead compared to 'ret' variant,
which is already emulated.
Typicall uprobe is installed on 'nop' for USDT and on function entry
which starts with the instrucion 'stp x29, x30, [sp, #imm]!' to push lr
and fp into stack regardless kernel or userspace binary. In order to
improve the performance of handling uprobe for common usecases. This
patch supports the emulation of Arm64 equvialents instructions of 'nop'
and 'push'. The benchmark results below indicates the performance gain
of emulation is obvious.
On Kunpeng916 (Hi1616), 4 NUMA nodes, 64 Arm64 cores@2.4GHz.
xol (1 cpus)
------------
uprobe-nop: 0.916 ± 0.001M/s (0.916M/prod)
uprobe-push: 0.908 ± 0.001M/s (0.908M/prod)
uprobe-ret: 1.855 ± 0.000M/s (1.855M/prod)
uretprobe-nop: 0.640 ± 0.000M/s (0.640M/prod)
uretprobe-push: 0.633 ± 0.001M/s (0.633M/prod)
uretprobe-ret: 0.978 ± 0.003M/s (0.978M/prod)
emulation (1 cpus)
-------------------
uprobe-nop: 1.862 ± 0.002M/s (1.862M/prod)
uprobe-push: 1.743 ± 0.006M/s (1.743M/prod)
uprobe-ret: 1.840 ± 0.001M/s (1.840M/prod)
uretprobe-nop: 0.964 ± 0.004M/s (0.964M/prod)
uretprobe-push: 0.936 ± 0.004M/s (0.936M/prod)
uretprobe-ret: 0.940 ± 0.001M/s (0.940M/prod)
As shown above, the performance gap between 'nop/push' and 'ret'
variants has been significantly reduced. Due to the emulation of 'push'
instruction needs to access userspace memory, it spent more cycles than
the other.
As Mark suggested [1], it is painful to emulate the correct atomicity
and ordering properties of STP, especially when it interacts with MTE,
POE, etc. So this patch just focus on the simuation of 'nop'. The
simluation of STP and related changes will be addressed in a separate
patch.
[0] https://lore.kernel.org/all/CAEf4BzaO4eG6hr2hzXYpn+7Uer4chS0R99zLn02ezZ5YruVuQw@mail.gmail.com/
[1] https://lore.kernel.org/all/Zr3RN4zxF5XPgjEB@J2N7QTR9R3/
CC: Andrii Nakryiko <andrii.nakryiko@gmail.com>
CC: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240909071114.1150053-1-liaochang1@huawei.com
[catalin.marinas@arm.com: small tweaks following MarkR's comments]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The PREEMPT_DISABLE_OFFSET definition was added in commit:
24534b3511 ("arm64: assembler: add macros to conditionally yield the NEON under PREEMPT")
... but hasn't been used since commit:
3931261ecf ("arm64: fpsimd: Bring cond_yield asm macro in line with new rules")
Remove PREEMPT_DISABLE_OFFSET.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The DMA_TO_DEVICE and DMA_FROM_DEVICE defintitons in asm-offsets
duplicate the common defintions from <linux/dma-direction.h> (which used
to live in <linux/dma-mapping.h>), and haven't been used from asseembly
code since commit:
7eacf1858b ("arm64: mm: Remove assembly DMA cache maintenance wrappers")
Remove them both.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The VM_EXEC definition duplicates the common VM_EXEC definition from
<linux/mm.h>. The common definition cannot safely be included by
assembly code but currently we don't need to use VM_EXEC in assembly.
The PAGE_SZ definition duplicates arm64's definition of PAGE_SIZE from
<asm/page-def.h> which can safely be included from assembly code and
should be used directly.
Remove the duplicate definitions.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The only user of the MM_CONTEXT_ID defintion was removed in commit:
25b92693a1 ("arm64: mm: convert cpu_do_switch_mm() to C")
Remove MM_CONTEXT_ID.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The COMPAT_SIGFRAME_REGS_OFFSET and COMPAT_RT_SIGFRAME_REGS_OFFSET
defintions aren't used anywhere.
They were added in commit:
f14d8025d2 ("arm64: compat: Generate asm offsets for signals")
... and subsequently their only user was removed in commit:
2d071968a4 ("arm64: compat: Remove 32-bit sigreturn code from the vDSO")
... leaving them unused.
Remove them.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The VMA_VM_MM definition is only used by the vma_vm_mm macro, which
itself is unused. The VMA_VM_FLAGS definition isn't used anywhere.
Remove them all.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241007123921.549340-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The probe_opcode_t typedef for u32 isn't necessary, and is a source of
confusion as it is easily confused with kprobe_opcode_t, which is a
typedef for __le32.
The typedef is only used within arch/arm64, and all of arm64's commn
insn code uses u32 for the endian-agnostic value of an instruction, so
it'd be clearer to use u32 consistently.
Remove probe_opcode_t and use u32 directly.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marnias@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The core kprobes code uses kprobe_opcode_t for the in-memory
representation of an instruction, using 'kprobe_opcode_t *' for XOL
slots. As arm64 instructions are always little-endian 32-bit values,
kprobes_opcode_t should be __le32, but at the moment kprobe_opcode_t
is typedef'd to u32.
Today there is no functional issue as we convert values via
cpu_to_le32() and le32_to_cpu() where necessary, but these conversions
are inconsistent with the types used, causing sparse warnings:
| CHECK arch/arm64/kernel/probes/kprobes.c
| arch/arm64/kernel/probes/kprobes.c:102:21: warning: cast to restricted __le32
| CHECK arch/arm64/kernel/probes/decode-insn.c
| arch/arm64/kernel/probes/decode-insn.c:122:46: warning: cast to restricted __le32
| arch/arm64/kernel/probes/decode-insn.c:124:50: warning: cast to restricted __le32
| arch/arm64/kernel/probes/decode-insn.c:136:31: warning: cast to restricted __le32
Improve this by making kprobes_opcode_t a typedef for __le32 and
consistently using this for pointers to executable instructions. With
this change we can rely on the type system to tell us where conversions
are necessary.
Since kprobe::opcode is changed from u32 to __le32, the existing
le32_to_cpu() converion moves from the point this is initialized (in
arch_prepare_kprobe()) to the points this is consumed when passed to
a handler or text patching function. As kprobe::opcode isn't altered or
consumed elsewhere, this shouldn't result in a functional change.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We share struct arch_probe_insn between krpboes and uprobes, but most of
its fields aren't necessary for uprobes:
* The 'insn' field is only used by kprobes as a pointer to the XOL slot.
* The 'restore' field is only used by probes as the PC to restore after
stepping an instruction in the XOL slot.
* The 'pstate_cc' field isn't used by kprobes or uprobes, and seems to
only exist as a result of copy-pasting the 32-bit arm implementation
of kprobes.
As these fields live in struct arch_probe_insn they cannot use
definitions that only exist when CONFIG_KPROBES=y, such as the
kprobe_opcode_t typedef, which we'd like to use in subsequent patches.
Clean this up by removing the 'pstate_cc' field, and moving the
kprobes-specific fields into the kprobes-specific struct
arch_specific_insn. To make it clear that the fields are related to
stepping instructions in the XOL slot, 'insn' is renamed to 'xol_insn'
and 'restore' is renamed to 'xol_restore'
At the same time, remove the misleading and useless comment above struct
arch_probe_insn.
The should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Restrict kernel threads to only have RWX overlays for pkey 0. This matches
what arch/x86 does, by defaulting to a restrictive PKRU.
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Kevin Brodsky <Kevin.Brodsky@arm.com>
Link: https://lore.kernel.org/r/20241001133618.1547996-2-joey.gouly@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
ftrace_regs was created to hold registers that store information to save
function parameters, return value and stack. Since it is a subset of
pt_regs, it should only be used by its accessor functions. But because
pt_regs can easily be taken from ftrace_regs (on most archs), it is
tempting to use it directly. But when running on other architectures, it
may fail to build or worse, build but crash the kernel!
Instead, make struct ftrace_regs an empty structure and have the
architectures define __arch_ftrace_regs and all the accessor functions
will typecast to it to get to the actual fields. This will help avoid
usage of ftrace_regs directly.
Link: https://lore.kernel.org/all/20241007171027.629bdafd@gandalf.local.home/
Cc: "linux-arch@vger.kernel.org" <linux-arch@vger.kernel.org>
Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Naveen N Rao <naveen@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/20241008230628.958778821@goodmis.org
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # s390
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The arm64 uprobes code is broken for big-endian kernels as it doesn't
convert the in-memory instruction encoding (which is always
little-endian) into the kernel's native endianness before analyzing and
simulating instructions. This may result in a few distinct problems:
* The kernel may may erroneously reject probing an instruction which can
safely be probed.
* The kernel may erroneously erroneously permit stepping an
instruction out-of-line when that instruction cannot be stepped
out-of-line safely.
* The kernel may erroneously simulate instruction incorrectly dur to
interpretting the byte-swapped encoding.
The endianness mismatch isn't caught by the compiler or sparse because:
* The arch_uprobe::{insn,ixol} fields are encoded as arrays of u8, so
the compiler and sparse have no idea these contain a little-endian
32-bit value. The core uprobes code populates these with a memcpy()
which similarly does not handle endianness.
* While the uprobe_opcode_t type is an alias for __le32, both
arch_uprobe_analyze_insn() and arch_uprobe_skip_sstep() cast from u8[]
to the similarly-named probe_opcode_t, which is an alias for u32.
Hence there is no endianness conversion warning.
Fix this by changing the arch_uprobe::{insn,ixol} fields to __le32 and
adding the appropriate __le32_to_cpu() conversions prior to consuming
the instruction encoding. The core uprobes copies these fields as opaque
ranges of bytes, and so is unaffected by this change.
At the same time, remove MAX_UINSN_BYTES and consistently use
AARCH64_INSN_SIZE for clarity.
Tested with the following:
| #include <stdio.h>
| #include <stdbool.h>
|
| #define noinline __attribute__((noinline))
|
| static noinline void *adrp_self(void)
| {
| void *addr;
|
| asm volatile(
| " adrp %x0, adrp_self\n"
| " add %x0, %x0, :lo12:adrp_self\n"
| : "=r" (addr));
| }
|
|
| int main(int argc, char *argv)
| {
| void *ptr = adrp_self();
| bool equal = (ptr == adrp_self);
|
| printf("adrp_self => %p\n"
| "adrp_self() => %p\n"
| "%s\n",
| adrp_self, ptr, equal ? "EQUAL" : "NOT EQUAL");
|
| return 0;
| }
.... where the adrp_self() function was compiled to:
| 00000000004007e0 <adrp_self>:
| 4007e0: 90000000 adrp x0, 400000 <__ehdr_start>
| 4007e4: 911f8000 add x0, x0, #0x7e0
| 4007e8: d65f03c0 ret
Before this patch, the ADRP is not recognized, and is assumed to be
steppable, resulting in corruption of the result:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0xffffffffff7e0
| NOT EQUAL
After this patch, the ADRP is correctly recognized and simulated:
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
| #
| # echo 'p /root/adrp-self:0x007e0' > /sys/kernel/tracing/uprobe_events
| # echo 1 > /sys/kernel/tracing/events/uprobes/enable
| # ./adrp-self
| adrp_self => 0x4007e0
| adrp_self() => 0x4007e0
| EQUAL
Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The simulate_ldr_literal() code always loads a 64-bit quantity, and when
simulating a 32-bit load into a 'W' register, it discards the most
significant 32 bits. For big-endian kernels this means that the relevant
bits are discarded, and the value returned is the the subsequent 32 bits
in memory (i.e. the value at addr + 4).
Additionally, simulate_ldr_literal() and simulate_ldrsw_literal() use a
plain C load, which the compiler may tear or elide (e.g. if the target
is the zero register). Today this doesn't happen to matter, but it may
matter in future if trampoline code uses a LDR (literal) or LDRSW
(literal).
Update simulate_ldr_literal() and simulate_ldrsw_literal() to use an
appropriately-sized READ_ONCE() to perform the access, which avoids
these problems.
Fixes: 39a67d49ba ("arm64: kprobes instruction simulation support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The simulate_ldr_literal() and simulate_ldrsw_literal() functions are
unsafe to use for uprobes. Both functions were originally written for
use with kprobes, and access memory with plain C accesses. When uprobes
was added, these were reused unmodified even though they cannot safely
access user memory.
There are three key problems:
1) The plain C accesses do not have corresponding extable entries, and
thus if they encounter a fault the kernel will treat these as
unintentional accesses to user memory, resulting in a BUG() which
will kill the kernel thread, and likely lead to further issues (e.g.
lockup or panic()).
2) The plain C accesses are subject to HW PAN and SW PAN, and so when
either is in use, any attempt to simulate an access to user memory
will fault. Thus neither simulate_ldr_literal() nor
simulate_ldrsw_literal() can do anything useful when simulating a
user instruction on any system with HW PAN or SW PAN.
3) The plain C accesses are privileged, as they run in kernel context,
and in practice can access a small range of kernel virtual addresses.
The instructions they simulate have a range of +/-1MiB, and since the
simulated instructions must itself be a user instructions in the
TTBR0 address range, these can address the final 1MiB of the TTBR1
acddress range by wrapping downwards from an address in the first
1MiB of the TTBR0 address range.
In contemporary kernels the last 8MiB of TTBR1 address range is
reserved, and accesses to this will always fault, meaning this is no
worse than (1).
Historically, it was theoretically possible for the linear map or
vmemmap to spill into the final 8MiB of the TTBR1 address range, but
in practice this is extremely unlikely to occur as this would
require either:
* Having enough physical memory to fill the entire linear map all the
way to the final 1MiB of the TTBR1 address range.
* Getting unlucky with KASLR randomization of the linear map such
that the populated region happens to overlap with the last 1MiB of
the TTBR address range.
... and in either case if we were to spill into the final page there
would be larger problems as the final page would alias with error
pointers.
Practically speaking, (1) and (2) are the big issues. Given there have
been no reports of problems since the broken code was introduced, it
appears that no-one is relying on probing these instructions with
uprobes.
Avoid these issues by not allowing uprobes on LDR (literal) and LDRSW
(literal), limiting the use of simulate_ldr_literal() and
simulate_ldrsw_literal() to kprobes. Attempts to place uprobes on LDR
(literal) and LDRSW (literal) will be rejected as
arm_probe_decode_insn() will return INSN_REJECTED. In future we can
consider introducing working uprobes support for these instructions, but
this will require more significant work.
Fixes: 9842ceae9f ("arm64: Add uprobe support")
Cc: stable@vger.kernel.org
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20241008155851.801546-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add the Microsoft Azure Cobalt 100 CPU to the list of CPUs suffering
from erratum 3194386 added in commit 75b3c43eab ("arm64: errata:
Expand speculative SSBS workaround")
CC: Mark Rutland <mark.rutland@arm.com>
CC: James More <james.morse@arm.com>
CC: Will Deacon <will@kernel.org>
CC: stable@vger.kernel.org # 6.6+
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Link: https://lore.kernel.org/r/20241003225239.321774-1-eahariha@linux.microsoft.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide a new register type NT_ARM_GCS reporting the current GCS mode
and pointer for EL0. Due to the interactions with allocation and
deallocation of Guarded Control Stacks we do not permit any changes to
the GCS mode via ptrace, only GCSPR_EL0 may be changed.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-27-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a context for the GCS state and include it in the signal context when
running on a system that supports GCS. We reuse the same flags that the
prctl() uses to specify which GCS features are enabled and also provide the
current GCS pointer.
We do not support enabling GCS via signal return, there is a conflict
between specifying GCSPR_EL0 and allocation of a new GCS and this is not
an ancticipated use case. We also enforce GCS configuration locking on
signal return.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-26-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When invoking a signal handler we use the GCS configuration and stack
for the current thread.
Since we implement signal return by calling the signal handler with a
return address set up pointing to a trampoline in the vDSO we need to
also configure any active GCS for this by pushing a frame for the
trampoline onto the GCS. If we do not do this then signal return will
generate a GCS protection fault.
In order to guard against attempts to bypass GCS protections via signal
return we only allow returning with GCSPR_EL0 pointing to an address
where it was previously preempted by a signal. We do this by pushing a
cap onto the GCS, this takes the form of an architectural GCS cap token
with the top bit set and token type of 0 which we add on signal entry
and validate and pop off on signal return. The combination of the top
bit being set and the token type mean that this can't be interpreted as
a valid token or address.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-25-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
When a new thread is created by a thread with GCS enabled the GCS needs
to be specified along with the regular stack.
Unfortunately plain clone() is not extensible and existing clone3()
users will not specify a stack so all existing code would be broken if
we mandated specifying the stack explicitly. For compatibility with
these cases and also x86 (which did not initially implement clone3()
support for shadow stacks) if no GCS is specified we will allocate one
so when a thread is created which has GCS enabled allocate one for it.
We follow the extensively discussed x86 implementation and allocate
min(RLIMIT_STACK/2, 2G). Since the GCS only stores the call stack and not
any variables this should be more than sufficient for most applications.
GCSs allocated via this mechanism will be freed when the thread exits.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-22-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
There are two registers controlling the GCS state of EL0, GCSPR_EL0 which
is the current GCS pointer and GCSCRE0_EL1 which has enable bits for the
specific GCS functionality enabled for EL0. Manage these on context switch
and process lifetime events, GCS is reset on exec(). Also ensure that
any changes to the GCS memory are visible to other PEs and that changes
from other PEs are visible on this one by issuing a GCSB DSYNC when
moving to or from a thread with GCS.
Since the current GCS configuration of a thread will be visible to
userspace we store the configuration in the format used with userspace
and provide a helper which configures the system register as needed.
On systems that support GCS we always allow access to GCSPR_EL0, this
facilitates reporting of GCS faults if userspace implements disabling of
GCS on error - the GCS can still be discovered and examined even if GCS
has been disabled.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-21-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A new exception code is defined for GCS specific faults other than
standard load/store faults, for example GCS token validation failures,
add handling for this. These faults are reported to userspace as
segfaults with code SEGV_CPERR (protection error), mirroring the
reporting for x86 shadow stack errors.
GCS faults due to memory load/store operations generate data aborts with
a flag set, these will be handled separately as part of the data abort
handling.
Since we do not currently enable GCS for EL1 we should not get any faults
there but while we're at it we wire things up there, treating any GCS
fault as fatal.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-19-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Provide a hwcap to enable userspace to detect support for GCS.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Yury Khrustalev <yury.khrustalev@arm.com>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-18-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Hook up an override for GCS, allowing it to be disabled from the command
line by specifying arm64.nogcs in case there are problems.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-17-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a cpufeature for GCS, allowing other code to conditionally support it
at runtime.
Reviewed-by: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241001-arm64-gcs-v13-12-222b78d87eee@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
