Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH, PWM_IJ, PWM_KL
and PWM_MN, along with the GPIO pin configurations for each channel.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
Link: https://lore.kernel.org/r/20240914-c3-pwm-v2-2-ac1f34c68ac2@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Change uart-a-ao into uart-ao-a, to use the same naming convention as
the other uart devices.
Signed-off-by: Theo Debrouwere <theo.debrouwere@faytech.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240905181803.94127-1-theo.debrouwere@faytech.de
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Meson A1 temperature sensor has dedicated power domain so bind it
to the device node.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240710223214.2348418-4-gnstark@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The chip has 3 dual-channel PWM modules PWM_AB, PWM_CD, PWM_EF those
can be connected to various digital I/O pins.
Each of 6 PWM is driven by individually selected clock parent and
8-bit divider. The PWM signal is generated using two 16-bit counters.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240710234116.2370655-4-gnstark@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Drop the undocumented amlogic,meson-gxlx-saradc compatible by dropping the
compatible override, and fix the following DTBs check:
/soc/bus@c1100000/adc@8680: failed to match any schema with compatible: ['amlogic,meson-gxlx-saradc', 'amlogic,meson-saradc']
Fixes: f6386b5afa ("arm64: dts: meson: add GXLX/S905L/p271 support")
Link: https://lore.kernel.org/r/20240905-topic-amlogic-upstream-gxlx-drop-iio-compat-v2-1-7a690eb95bc2@linaro.org
[narmstrong: fix commit message]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fix warning when use W=1 to build dtb, as following error:
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:65.7-76.4: Warning
(unit_address_vs_reg): /sram: node has a reg or ranges property,
but no unit name
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(unit_address_vs_reg): /soc/bus@fe000000/pinctrl@4000: node has a
unit name, but no reg or ranges property
arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(simple_bus_reg): /soc/bus@fe000000/pinctrl@4000: missing or empty
reg/ranges property
arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts:205.9-245.4:
Warning (avoid_unnecessary_addr_size): /soc/bus@fe000000/spi@56000
/nand@0: unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Fixes: d4bd8f3023 ("arm64: dts: amlogic: add C3 AW419 board")
Fixes: 520b792e83 ("arm64: dts: amlogic: add some device nodes for C3")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202409010005.A7tSzgEn-lkp@intel.com/
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240902-fix_warning-v1-1-037029c584fc@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add Amlogic C3 C308L AW419 board. The corresponding binding
has been applied, therefore, this series does not need to
add a binding corresponding to the AW419 board.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-3-b56c0511e9dc@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add some device nodes for SoC C3, including periphs clock controller
node, PLL clock controller node, SPICC node, regulator node, NAND
controller node, sdcard node, Ethernet MAC and PHY node.
The sdacrd depends on regulator and pinctrl(select), so some
property fields are placed at the board level. The nand chip
is placed on the board, So some property fields about SPIFC
and NAND controller node are placed at the board level.
THe Ethernet MAC support outchip PHY, so place this property
field(select PHY) at the board level.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240830-c3_add_node-v4-2-b56c0511e9dc@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic A4 SoC:
soc soc0: Amlogic A4 (A113L2) Revision 40:b (1:1) Detected.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240719-soc_info-v3-6-020a3b687c0c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic T7 SoC:
soc soc0: Amlogic T7 (A311D2) Revision 36:c (1:1) Detected.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240719-soc_info-v3-5-020a3b687c0c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic C3 SoC:
soc soc0: Amlogic C3 (C308L) Revision 3d:a (1:1) Detected
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240719-soc_info-v3-4-020a3b687c0c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add node for board info registers, which allows getting SoC family and
board revision.
For example, with MESON_GX_SOCINFO config enabled we can get the
following information for board with Amlogic S4 SoC:
soc soc0: Amlogic S4 (S805X2) Revision 37:a (2:1) Detecte
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240719-soc_info-v3-3-020a3b687c0c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Enable more device nodes for AQ222 base S4, including
SD, regulator and ethnernet node.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20240709-s4_node-v2-1-b9a218603c31@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities for
thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppaNA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXZwCgrEtIAQw0x6EF7w/iTWVS5UJj9AEAoLCj5UwO
WX978uThyUctuYYKbw+8
=Cm7j
-----END PGP SIGNATURE-----
Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
HDMI Tx needs the system clock set on the xtal rate.
This clock is managed by the main clock controller of the related SoCs.
Currently 2 part of the display drivers race to setup the HDMI system
clock by directly poking the controller register. The clock API should
be used to setup the rate instead.
Use assigned-clock to setup the HDMI system clock.
Fixes: 6939db7e0d ("ARM64: dts: meson-gx: Add support for HDMI output")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240626152733.1350376-3-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The clocks provided to HDMI tx are not consistent between gx and g12:
* gx receives the peripheral clock as 'isfr' while g12 receives it as
'iahb'
* g12 gets the HDMI system clock as 'isfr' but gx does not even get it.
It surely needs that clock since the driver is directly poking around
the clock controller's registers for that clock.
Align gx SoCs with g12 and provide:
* the HDMI peripheral clock as 'iahb'
* the HDMI system clock as 'isfr'
Fixes: 6939db7e0d ("ARM64: dts: meson-gx: Add support for HDMI output")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240626152733.1350376-2-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add device nodes for PWM_AB, PWM_CD, PWM_EF, PWM_GH and PWM_IJ
along with GPIO PIN configs of each channel.
Signed-off-by: Junyi Zhao <junyi.zhao@amlogic.com>
Reviewed-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Kelvin Zhang <kelvin.zhang@amlogic.com>
Link: https://lore.kernel.org/r/20240613-s4-pwm-v8-2-b5bd0a768282@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
HDMI Tx needs HDMI Tx memory power domain turned on. This power domain is
handled under the VPU power domain.
The HDMI Tx currently works because it is enabling the PD by directly
poking the power controller register. It is should not do that but properly
use the power domain controller.
Fix this by adding the power domain to HDMI Tx.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240625145017.1003346-3-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Spdif output currently uses a 0.5mA drive strength by default.
While the result depends on how the spdif output is hooked to
rest of the system, this is a bit weak and signal quality
may be poor. This was reported on the vim3l for example.
Increase the drive strength to 3mA, as used for TDM, to be on the
safe side.
Fixes: 649675db93 ("arm64: dts: meson: g12a: add spdifouts")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240625115443.934763-1-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The spdif input and output of g12 and sm1 are compatible but
sm1 should use the related compatible since it exists.
Fixes: 86f2159468 ("arm64: dts: meson-sm1: add spdifin and pdifout nodes")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240625111845.928192-1-jbrunet@baylibre.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Dreambox One and Dreambox Two are based on the Amlogic W400 reference
board with an S922X chip and the following specs:
- 2GB DDR3 RAM
- 16GB eMMC
- 10/100/1000 Base-T Ethernet
- AP6356 Wireless (802.11 b/g/n/ac, BT 5.0)
- HDMI 2.1 video
- S/PDIF optical output
- 2x DVB-S2/T2
- Smartcard Reader Slot
- 2x USB 2.0 port (1x micro-USB for service)
- 1x USB 3.0 port
- IR receiver
- 1x Power LED (blue)
- 1x Power button (top)
- 1x Update/Reset button (underside)
- 1x micro SD card slot
Dreambox Two differences:
- 3" Colour LCD display (MIPI-DSI)
- Common Interface Slot
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240622140112.2609534-3-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The OSMC Vero 4K device is based on the Amlogic S905X (P212)
reference design with the following specifications:
- 2GB DDR4 RAM
- 16GB eMMC
- HDMI 2.1 video
- S/PDIF optical output
- AV output
- 10/100 Ethernet
- AP6255 Wireless (802.11 a/b/g/n/ac, BT 4.2)
- 2x USB 2.0 ports (1x OTG)
- IR receiver (internal)
- IR extender port (external)
- 1x micro SD card slot
- 1x Power LED (red)
- 1x Reset button (in AV jack)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240622135117.2608890-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
On Odroid n2/n2+ previously use gpio-hog to reset the usb hub,
switch to used on-board usb hub reset to enable the usb hub
and enable power to hub.
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Link: https://lore.kernel.org/r/20240613123020.43500-2-linux.amoon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes the following:
interrupt-controller@4080: compatible: 'oneOf' conditional failed, one must be fixed:
['amlogic,meson-gpio-intc', 'amlogic,c3-gpio-intc'] is too long
'amlogic,meson-gpio-intc' is not one of ['amlogic,meson8-gpio-intc', 'amlogic,meson8b-gpio-intc', 'amlogic,meson-gxbb-gpio-intc', 'amlogic,meson-gxl-gpio-intc', 'amlogic,meson-axg-gpio-intc', 'amlogic,meson-g12a-gpio-intc', 'amlogic,meson-sm1-gpio-intc', 'amlogic,meson-a1-gpio-intc', 'amlogic,meson-s4-gpio-intc', 'amlogic,c3-gpio-intc', 'amlogic,t7-gpio-intc']
'amlogic,meson-gpio-intc' was expected
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-9-62e812729541@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The AO pinctrl was mis-described as beeing part of AO rti sysctrl, move it
it into aobus like it's also done in GX SoCs, and remove the now invalid
'#address-cells', '#size-cells' & 'ranges from the sys-ctrl@0 node.
This fixes:
sys-ctrl@0: '#address-cells', '#size-cells', 'ranges' do not match any of the regexes: 'pinctrl-[0-9]+'
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-2-62e812729541@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The fan is connected to the GPIOAO_10 pin, which can be connected to the pwm_AO_cd
controller, but this one is already used for the vddcpu_b regulator.
The fan was wrongly described as using the pwm_cd with the invalid "pwm-gpios"
property, both are wrong so remove the fan until we find an acceptable solution.
This fixes the following error:
pwm@1a000: 'pwm-gpios' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/pwm/pwm-amlogic.yaml#
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Link: https://lore.kernel.org/r/20240606-topic-amlogic-upstream-bindings-fixes-dts-v1-1-62e812729541@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The A311D on Zero2 needs active cooling and the board includes a header to
connect a simple fan. Add pwm-fan support with basic thermal properties so
the fan runs when connected.
Suggested-by: Yuntian Zhang <yt@radxa.com>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240606090615.3946433-1-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add a device-tree for the GXLX Amlogic P271 (S905L) reference design
board. This is a low-cost design similar to P281 (S905W) but with
silicon differences to omit VP9 and use Mali 450-MP2 (not MP3). The
SoC is marked with S905L and "2" (believed to denote MP2) resulting
in chip distributor stock lists and Android STB marketing sometimes
describing it as an S905L2 chip.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240604084134.3315841-2-christianshewitt@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
It appears that this accidentally got added into the spi node, causing
a warning.
arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts:119.16-161.4: Warning (spi_bus_reg): /soc/spi@fd000400/thermal-zones: missing or empty reg property
Fixes: 593ab95123 ("arm64: dts: amlogic: ad402: setup thermal-zones")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240528133215.2266419-1-arnd@kernel.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
There is one thermal zone with 3 trip points: soc_passive, soc_hot, and
soc_critical, as well as two cooling maps.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240328192645.20914-4-ddrokosov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The A1 SoC family has only one thermal sensor for CPU temperature
measurement. It is required to set the TS clock rate to 500kHz to make
it workable.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Link: https://lore.kernel.org/r/20240328192645.20914-3-ddrokosov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
It's used for CPU with DVFS feature to specify minimum and maximum
cooling state used in the reference.
Without these values DVFS will not work and dtbs_check will raise the
error.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240328192645.20914-2-ddrokosov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Amlogic A5 is an application processor designed for smart audio
and IoT applications.
Add basic support for the A5 based Amlogic AV400 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240401-basic_dt-v3-5-cb29ae1c16da@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Amlogic A4 is an application processor designed for smart audio
and IoT applications.
Add basic support for the A4 based Amlogic BA400 board, which describes
the following components: CPU, GIC, IRQ, Timer and UART.
These are capable of booting up into the serial console.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240401-basic_dt-v3-4-cb29ae1c16da@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The power-controller module works well by adding its parent
node secure-monitor.
Fixes: 085f7a298a ("arm64: dts: add support for S4 power domain controller")
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240412-fix-secpwr-s4-v2-1-3802fd936d77@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
