for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
-----BEGIN PGP SIGNATURE-----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=400A
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=L8Aj
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux into soc/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 6.10, please pull the following:
- Laurent converts the Raspberry Pi firmware DT binding to YAML, updates
the firmware driver to use the proper 'struct device' reference for
DMA mappings and drops unneeded properties from the DT node and
finishes by removing the duplicate firmware-clocks property to
bcm2835-rpi.dtsi. He also added support for the CAM1 camera interface
regulator.
- Uwe adds a pinctrl-based multiplexing description to allow the use of
I2C0 pins to allow usage between the 40-pin Raspberry Pi header and
the CSI and DSI connectors. He then describes the PCF85063 RTC device
available on the CM4 I/O board making use of that pinctrl-based
muxing.
- Arinc updates the Asus RT-AC3100 and RT-AC88U DTs to have proper LED
colors and function properties, NVMEM MAC addresses and removes
duplicates and unnecessary properties and does a few Device Tree
cleanups.. He then adds support for the Asus RT-AC3200 (BCM4709-based)
and RT-AC3500 routers.
- Jean-Michel adds DT nodes for the CSI Unicam camera interfaces on the
Raspberry Pi 4 / BCM2711 SoCs
- Florian adds support for the Ethernet LEDs on Raspberry Pi 4 B and
Raspberry Pi 4 CM boards.
* tag 'arm-soc/for-6.10/devicetree' of https://github.com/Broadcom/stblinux:
arm: dts: bcm2711: Describe Ethernet LEDs
ARM: dts: BCM5301X: Conform to DTS Coding Style on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: Add DT for ASUS RT-AC5300
ARM: dts: BCM5301X: Add DT for ASUS RT-AC3200
dt-bindings: arm: bcm: add bindings for ASUS RT-AC5300
dt-bindings: arm: bcm: add bindings for ASUS RT-AC3200
ARM: dts: bcm2835: Add Unicam CSI nodes
ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
ARM: dts: bcm2711-rpi-4-b: Add CAM1 regulator
ARM: dts: bcm2711-rpi-cm4-io: Add RTC on I2C0
ARM: dts: bcm2711-rpi: Add pinctrl-based multiplexing for I2C0
ARM: dts: bcm2835-rpi: Move duplicate firmware-clocks to bcm2835-rpi.dtsi
ARM: dts: bcm283x: Drop unneeded properties in the bcm2835-firmware node
firmware: raspberrypi: Use correct device for DMA mappings
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add gpio child node
Link: https://lore.kernel.org/r/20240429213703.2327834-2-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The "arm,armv8-pmuv3" compatible is intended only for s/w models. Primarily,
it doesn't provide any detail on uarch specific events.
There's still remaining cases for CPUs without any corresponding PMU
definition and for big.LITTLE systems which only have a single PMU node
(there should be one per core type).
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Dinh Nguyen <dinguyen@kernel.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Alim Akhtar <alim.akhtar@samsung.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://lore.kernel.org/r/20240417203853.3212103-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add both MIPI CSI-2 nodes in the bcm283x tree and take care of the
Raspberry Pi / BCM2711 specific in the related files.
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20240424153542.32503-6-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM2711 SoC also has a mostly generic xHCI. The USB port is
currently only usable on the Compute Module 4 (e.g. via IO board).
Because DWC2 and xHCI share the same PHY, we let the bootloader
enable it on demand.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231205200531.8232-4-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After converting the bcm2835-dma DT binding to YAML, the DT schema
checks gave warnings like:
$nodename:0: 'dma@7e007000' does not match '^dma-controller(@.*)?$'
So fix them accordingly.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230617133620.53129-4-stefan.wahren@i2se.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The arm dts directory has grown to 1559 boards which makes it a bit
unwieldy to maintain and use. Past attempts stalled out due to plans to
move .dts files out of the kernel tree. Doing that is no longer planned
(any time soon at least), so let's go ahead and group .dts files by
vendors. This move aligns arm with arm64 .dts file structure.
There's no change to dtbs_install as the flat structure is maintained on
install.
The naming of vendor directories is roughly in this order of preference:
- Matching original and current SoC vendor prefix/name (e.g. ti, qcom)
- Current vendor prefix/name if still actively sold (SoCs which have
been aquired) (e.g. nxp/imx)
- Existing platform name for older platforms not sold/maintained by any
company (e.g. gemini, nspire)
The whole move was scripted with the exception of MAINTAINERS and a few
makefile fixups.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Michal Simek <michal.simek@amd.com> #Xilinx
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Paul Barker <paul.barker@sancloud.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Wei Xu <xuwei5@hisilicon.com> #hisilicon
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Peter Rosin <peda@axentia.se>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com> #broadcom
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Romain Perier <romain.perier@gmail.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Acked-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2023-06-21 11:39:50 -06:00
Renamed from arch/arm/boot/dts/bcm2711.dtsi (Browse further)
