- Introduced new LCD_POWER_ constants to decouple the LCD subsystem from fbdev.
- Several drivers were updated to use the new LCD_POWER_ constants.
- Clarified the semantics of the lcd_ops.controls_device callback.
- Removed unnecessary includes and dependencies.
- Removed unused notifier functionality.
- Simplified code with scoped for-each loops.
- Fixed module autoloading for the ktz8866 driver.
- Updated device tree bindings to yaml format.
- Minor cleanups and improvements in various drivers.
-----BEGIN PGP SIGNATURE-----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=9n4l
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Improve handling of LCD power states and interactions with the fbdev
subsystem
- Introduce new LCD_POWER_ constants to decouple the LCD subsystem from
fbdev
- Update several drivers to use the new LCD_POWER_ constants
- Clarify the semantics of the lcd_ops.controls_device callback
- Remove unnecessary includes and dependencies
- Remove unused notifier functionality
- Simplify code with scoped for-each loops
- Fix module autoloading for the ktz8866 driver
- Update device tree bindings to yaml format
- Minor cleanups and improvements in various drivers
* tag 'backlight-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: (33 commits)
MAINTAINERS: Use Daniel Thompson's korg address for Backlight work
dt-bindings: backlight: Convert zii,rave-sp-backlight.txt to yaml
backlight: Remove notifier
backlight: ktz8866: Fix module autoloading
backlight: 88pm860x_bl: Simplify with scoped for each OF child loop
backlight: lcd: Do not include <linux/fb.h> in lcd header
backlight: lcd: Remove struct fb_videomode from set_mode callback
backlight: lcd: Replace check_fb with controls_device
HID: picoLCD: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: omap: Use lcd power constants
fbdev: imxfb: Use lcd power constants
fbdev: imxfb: Replace check_fb in favor of struct fb_info.lcd_dev
fbdev: clps711x-fb: Use lcd power constants
fbdev: clps711x-fb: Replace check_fb in favor of struct fb_info.lcd_dev
backlight: tdo24m: Use lcd power constants
backlight: platform_lcd: Use lcd power constants
backlight: platform_lcd: Remove match_fb from struct plat_lcd_data
backlight: platform_lcd: Remove include statement for <linux/backlight.h>
backlight: otm3225a: Use lcd power constants
backlight: ltv350qv: Use lcd power constants
...
- Reverted platform driver removal to the original method for consistency.
- Introduced ordered workqueues for LED events, replacing the less efficient system_wq.
- Switched to a safer iteration macro in several drivers to prevent potential memory leaks.
- Fixed a refcounting bug in the mt6360 flash LED driver.
- Fixed an uninitialized variable in the mt6370_mc_pattern_clear() function.
- Resolved Smatch warnings in the leds-bcm6328 driver.
- Addressed a potential NULL pointer dereference in the brightness_show() function.
- Fixed an incorrect format specifier in the ss4200 driver.
- Prevented a resource leak in the max5970 driver's probe function.
- Added support for specifying the number of serial shift bits in the device tree for the BCM63138 family.
- Implemented multicolor brightness control in the lp5562 driver.
- Added a device tree property to override the default LED pin polarity.
- Added a property to specify the default brightness value when the LED is initially on.
- Set missing timing properties for the ktd2692 driver.
- Documented the "rc-feedback" trigger for controlling LEDs based on remote control activity.
- Converted text bindings to YAML for the pca955x driver to enable device tree validation.
- Removed redundant checks for invalid channel numbers in the lp55xx driver.
- Updated the MAINTAINERS file with current contact information.
-----BEGIN PGP SIGNATURE-----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=qZhx
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
PULL LED updates from Lee Jones:
- Remove unused local header files from various drivers
- Revert platform driver removal to the original method for consistency
- Introduce ordered workqueues for LED events, replacing the less
efficient system_wq
- Switch to a safer iteration macro in several drivers to prevent
potential memory leaks
- Fix a refcounting bug in the mt6360 flash LED driver
- Fix an uninitialized variable in the mt6370_mc_pattern_clear()
function
- Resolve Smatch warnings in the leds-bcm6328 driver
- Address a potential NULL pointer dereference in the brightness_show()
function
- Fix an incorrect format specifier in the ss4200 driver
- Prevent a resource leak in the max5970 driver's probe function
- Add support for specifying the number of serial shift bits in the
device tree for the BCM63138 family
- Implement multicolor brightness control in the lp5562 driver
- Add a device tree property to override the default LED pin polarity
- Add a property to specify the default brightness value when the LED
is initially on
- Set missing timing properties for the ktd2692 driver
- Document the "rc-feedback" trigger for controlling LEDs based on
remote control activity
- Convert text bindings to YAML for the pca955x driver to enable device
tree validation
- Remove redundant checks for invalid channel numbers in the lp55xx
driver
- Update the MAINTAINERS file with current contact information
* tag 'leds-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (46 commits)
leds: ss4200: Fix the wrong format specifier for 'blinking'
leds: pwm: Add optional DT property default-brightness
dt-bindings: leds: pwm: Add default-brightness property
leds: class: Protect brightness_show() with led_cdev->led_access mutex
leds: ktd2692: Set missing timing properties
leds: max5970: Fix unreleased fwnode_handle in probe function
leds: Introduce ordered workqueue for LEDs events instead of system_wq
MAINTAINERS: Replace Siemens IPC related bouncing maintainers
leds: bcm6328: Replace divide condition with comparison for shift value
leds: lp55xx: Remove redundant test for invalid channel number
dt-bindings: leds: pca955x: Convert text bindings to YAML
leds: rgb: leds-mt6370-rgb: Fix uninitialized variable 'ret' in mt6370_mc_pattern_clear
leds: lp5562: Add multicolor brightness control
dt-bindings: leds: Add 'active-high' property
leds: Switch back to struct platform_driver::remove()
leds: bcm63138: Add some register defines
leds: bcm63138: Handle shift register config
leds: bcm63138: Use scopes and guards
dt-bindings: leds: bcm63138: Add shift register bits
leds: leds-gpio-register: Reorganize kerneldoc parameter names
...
Convert the Spreadtrum SC27xx PMIC bindings to DT schema. Adjust the
filename to match the compatible of the only in-tree user, SC2731.
Change #interrupt-cells value to 1, as according to [1] that is the
correct value.
Move partial examples of child nodes in the child node schemas to this new
MFD schema to have one complete example.
[1] https://lore.kernel.org/lkml/b6a32917d1e231277d240a4084bebb6ad91247e3.1550060544.git.baolin.wang@linaro.org/
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Link: https://lore.kernel.org/r/efd200c3b5b75405e4e450d064b026f10ae2f8e0.1730709384.git.stano.jakubek@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Optional default-brightness property specifies brightness value to be
used if default LED state is on.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241105185006.1380166-2-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the text bindings of pca955x to YAML so it could be used to
validate the DTS.
Signed-off-by: Ricky CX Wu <ricky.cx.wu.wiwynn@gmail.com>
Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20241016093857.925467-1-Delphine_CC_Chiu@wiwynn.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the mfd: mediatek: mt6397 binding to DT schema format.
MT6323, MT6358, and MT6397 are PMIC devices with multiple function
subdevices. They share a common PMIC design but have variations in
subdevice combinations.
Key updates in this conversion:
1. RTC:
- Convert rtc-mt6397.txt and merge into parent MT6397 PMIC DT schema.
2. Regulators:
- Align to generic name "regulators".
- Update references from .txt to .yaml for mt6323, mt6358, and mt6397
regulators.
- Simplify regulator name labels in device tree examples.
3. Audio Codec:
- Simplify Audio Codec part with updating compatible items.
- Align to generic name "audio-codec" for codec and sound subdevices.
4. Clocks:
- Align to generic name "clocks" for clockbuffer subdevices.
5. LEDs:
- Convert leds-mt6323.txt and merge into parent MT6397 PMIC DT schema.
- Update LED binding.
6. Keys:
- Add detailed descriptions for power and home keys.
- Add compatible: mediatek,mt6358-keys.
7. Power Controller:
- Convert mt6323-poweroff.txt and merge into parent MT6397 PMIC DT
schema.
- Add #power-domain-cells property to fix dt-binding check error.
- Clarify "BBPU" as "Baseband power up".
8. Pinctrl:
- Align to generic name "pinctrl" instead of "pin-controller".
9. Compatible:
- Drop "mediatek,mt6357" since there is a separated DT Schema
for PMIC MT6357.
10. Examples:
- MT6323: Retain complete examples for this PMIC.
- MT6358 and MT6397: simplify settings in regulators.
- Preserve "audio-codec", "clocks", "pinctrl", "rtc", and "keys"
sections as they contain typical settings for different PMICs.
Additional updates:
- MAINTAINERS: Add co-maintainers and reference to
mfd/mediatek,mt6397.yaml for LED and power-controller drivers.
- input/mediatek,pmic-keys.yaml: Update reference to
mfd/mediatek,mt6397.yaml.
Signed-off-by: Sen Chu <sen.chu@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20241001104145.24054-3-macpaul.lin@mediatek.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert device tree binding doc zii,rave-sp-backlight.txt to yaml format.
Additional Changes:
- Remove mfd parent node at example.
- Ref to backlight's common.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-zii_yaml-v2-2-0ab730607422@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Other than described in commit c94d178313 ("dt-bindings: net: phy:
Make LED active-low property common") the absence of the 'active-low'
property means not to touch the polarity settings which are inherited
from reset defaults, the bootloader or bootstrap configuration. Hence,
in order to override a LED pin being active-high in case of the default,
bootloader or bootstrap setting being active-low an additional property
'active-high' is required. Document that property and make it mutually
exclusive to the existing 'active-low' property.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/e9b15613a81129ceecb07ec51f71bbe75425ad2e.1728558223.git.daniel@makrotopia.org
Signed-off-by: Lee Jones <lee@kernel.org>
The BCM63138 family of serial LED controllers has a register
where we can set up bits for the shift registers. These are
the number of rounds the bits need to be shifted before all
bits have been shifted through the external shift registers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241010-bcm63138-leds-v4-1-cdb80780a555@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Document the "rc-feedback" trigger which is used to control LEDs by
remote control device activity. This is an existing trigger used in
existing DTs, document it so validation of those DTs would pass.
It was originally introduced into the Linux kernel in 2013 with
commit 153a60bb0f ("[media] rc: add feedback led trigger for rc keypresses")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241007205315.2477060-1-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
- Fixed device child node usage in the BD2606MVV and PCA995x drivers.
- Used device_for_each_child_node_scoped() to access child nodes in the IS31FL319X driver.
- Reset the LED controller during the probe in the LM3601X driver.
- Used device_for_each_child_node() to access device child nodes in the PCA995X driver.
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver.
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver.
- Used scoped device node handling to simplify error paths in the AAT1290, KTD2692, and MC13783 drivers.
- Added missing of_node_get for probe duration in the MAX77693 driver.
- Simplified using for_each_available_child_of_node_scoped() loops when iterating over device nodes.
- Used devm_clk_get_enabled() helpers in the LP55XX driver.
- Converted DT bindings from TXT to YAML format for various drivers, including LM3692x and SC2731-BLTC.
- Set num_leds after allocation in the GPIO driver.
- Removed irrelevant blink configuration error message in the PCA9532 driver.
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris Omnia driver.
-----BEGIN PGP SIGNATURE-----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=a/t6
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Limited LED current based on thermal conditions in the QCOM flash LED
driver
- Fixed device child node usage in the BD2606MVV and PCA995x drivers
- Used device_for_each_child_node_scoped() to access child nodes in the
IS31FL319X driver
- Reset the LED controller during the probe in the LM3601X driver
- Used device_for_each_child_node() to access device child nodes in the
PCA995X driver
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver
- Used scoped device node handling to simplify error paths in the
AAT1290, KTD2692, and MC13783 drivers
- Added missing of_node_get for probe duration in the MAX77693 driver
- Simplified using for_each_available_child_of_node_scoped() loops when
iterating over device nodes
- Used devm_clk_get_enabled() helpers in the LP55XX driver
- Converted DT bindings from TXT to YAML format for various drivers,
including LM3692x and SC2731-BLTC
- Set num_leds after allocation in the GPIO driver
- Removed irrelevant blink configuration error message in the PCA9532
driver
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
Omnia driver
* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
leds: pca9532: Remove irrelevant blink configuration error message
leds: gpio: Set num_leds after allocation
dt-bindings: leds: Convert leds-lm3692x to YAML format
leds: lp55xx: Use devm_clk_get_enabled() helpers
leds: as3645a: Use device_* to iterate over device child nodes
leds: qcom-lpg: Simplify with scoped for each OF child loop
leds: turris-omnia: Simplify with scoped for each OF child loop
leds: sc27xx: Simplify with scoped for each OF child loop
leds: pca9532: Simplify with scoped for each OF child loop
leds: netxbig: Simplify with scoped for each OF child loop
leds: mt6323: Simplify with scoped for each OF child loop
leds: mc13783: Use scoped device node handling to simplify error paths
leds: lp55xx: Simplify with scoped for each OF child loop
leds: is31fl32xx: Simplify with scoped for each OF child loop
leds: bcm6358: Simplify with scoped for each OF child loop
leds: bcm6328: Simplify with scoped for each OF child loop
leds: aw2013: Simplify with scoped for each OF child loop
leds: 88pm860x: Simplify with scoped for each OF child loop
leds: max77693: Simplify with scoped for each OF child loop
...
Corrected several typos in Documentation/devicetree/bindings files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Signed-off-by: Yu-Chun Lin <eleanor15x@gmail.com>
Link: https://lore.kernel.org/r/20240905151943.2792056-1-eleanor15x@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Additional changes:
- Add ref to common.yaml for child node.
- Add I2C node at example.
Fix below warning:
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dtb: /soc@0/bus@30800000/i2c@30a40000/backlight@36:
failed to match any schema with compatible: ['ti,lm36922']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240821222001.591111-1-Frank.Li@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Document the "netdev" trigger which is used to control LEDs by
network device activity. This is an existing trigger used in
existing DTs, document it so validation of those DTs would pass.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240708114653.18566-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the Spreadtrum SC2731 breathing light controller bindings
to DT schema. Adjust filename to match compatible.
Signed-off-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/ZpKM3yYKJixnRabP@standask-GA-A55M-S2HP
Signed-off-by: Lee Jones <lee@kernel.org>
Add nxp,pca9956b compatible, which has 24 instead of 16 outputs. Adjust
the documentation for the difference.
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Pieterjan Camerlynck <pieterjanca@gmail.com>
Link: https://lore.kernel.org/r/20240711-pca995x-v4-1-702a67148065@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
- Add new Trigger for Input Events
- Add new led_mc_set_brightness() call to adapt colour/brightness for mutli-colour LEDs
- Add new lled_mc_trigger_event() call to call the above based on given trigger conditions
- Add new led_get_color_name() call, a wrapper around the existing led_colors[] array
- Add a new flag to avoid automatic renaming of LED devices
- New Drivers
- Add support for Silergy SY7802 Flash LED Controller
- Add support for Texas Instruments LP5569 LED Controller
- Add support for ChromeOS EC LED Controller
- New Device Support
- Add support for KTD202{6,7} to Kinetic KTD2026/7 LEDs
- Fix-ups
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity/duplication
- Use generic platform device properties instead of OF/ACPI specific ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
- Bug Fixes
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error handling routines
- Repair locking issue causing circular dependency splats and lock-ups
- Unregister sysfs entries before deactivating triggers to prevent use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW triggers
-----BEGIN PGP SIGNATURE-----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=0Kyu
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- New trigger for Input Events
- New led_mc_set_brightness() call to adapt colour/brightness for
mutli-colour LEDs
- New lled_mc_trigger_event() call to call the above based on given
trigger conditions
- New led_get_color_name() call, a wrapper around the existing
led_colors[] array
- A new flag to avoid automatic renaming of LED devices
New Drivers:
- Silergy SY7802 Flash LED Controller
- Texas Instruments LP5569 LED Controller
- ChromeOS EC LED Controller
New Device Support:
- KTD202{6,7} support for Kinetic KTD2026/7 LEDs
Fix-ups:
- Replace ACPI/DT firmware helpers with agnostic variants
- Make use of resource managed devm_* API calls
- Device Tree binding adaptions/conversions/creation
- Constify/staticise applicable data structures
- Trivial; spelling, whitespace, coding-style adaptions
- Drop i2c_device_id::driver_data where the value is unused
- Utilise centrally provided helpers and macros to aid simplicity and
avoid duplication
- Use generic platform device properties instead of OF/ACPI specific
ones
- Consolidate/de-duplicate various functionality
- Remove superfluous/duplicated/unused sections
- Make use of the new *_scoped() guard APIs
- Improve/simplify error handling
Bug Fixes:
- Flush pending brightness changes before activating the trigger
- Repair incorrect device naming preventing matches
- Prevent memory leaks by correctly free resources during error
handling routines
- Repair locking issue causing circular dependency splats and
lock-ups
- Unregister sysfs entries before deactivating triggers to prevent
use-after issues
- Supply a bunch of MODULE_DESCRIPTIONs to silence modpost warnings
- Use correct return codes expected by the callers
- Omit set_brightness() error message for a LEDs that support only HW
triggers"
* tag 'leds-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (65 commits)
leds: leds-lp5569: Enable chip after chip configuration
leds: leds-lp5569: Better handle enabling clock internal setting
leds: leds-lp5569: Fix typo in driver name
leds: flash: leds-qcom-flash: Test the correct variable in init
leds: leds-lp55xx: Convert mutex lock/unlock to guard API
leds: leds-lp5523: Convert to sysfs_emit API
leds: leds-lp5569: Convert to sysfs_emit API
Revert "leds: led-core: Fix refcount leak in of_led_get()"
leds: leds-lp5569: Add support for Texas Instruments LP5569
leds: leds-lp55xx: Drop deprecated defines
leds: leds-lp55xx: Support ENGINE program up to 128 bytes
leds: leds-lp55xx: Generalize sysfs master_fader
leds: leds-lp55xx: Generalize sysfs engine_leds
leds: leds-lp55xx: Generalize sysfs engine_load and engine_mode
leds: leds-lp55xx: Generalize stop_engine function
leds: leds-lp55xx: Generalize turn_off_channels function
leds: leds-lp55xx: Generalize set_led_current function
leds: leds-lp55xx: Generalize multicolor_brightness function
leds: leds-lp55xx: Generalize led_brightness function
leds: leds-lp55xx: Generalize firmware_loaded function
...
Add new ti,lp5569 compatible, this is similar to national,lp5523 with
slight change to reg order and reg type and advanced way for LED fault.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240626160027.19703-3-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
pwr-sel property is specific to ti,lp8501, make it conditional of the
related compatible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240626160027.19703-2-ansuelsmth@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add Device Tree bindings for Texas Instruments LM3509 - a
High Efficiency Boost for White LED's and/or OLED Displays
Signed-off-by: Patrick Gansterer <paroga@paroga.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20240526105136.721529-2-paroga@paroga.com
Signed-off-by: Lee Jones <lee@kernel.org>
The PM6150L LPG modules are compatible with the PM8150L LPG modules,
document the PM6150L LPG compatible as fallback for the PM8150L LPG.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240306172710.59780-2-danila@jiaxyga.com
Signed-off-by: Lee Jones <lee@kernel.org>
Convert the pca963x DT bindings to YAML schema. The existing properties
are kept without modification, but the example is adapted to the latest
common bindings for LEDs.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305004501.849-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Lee Jones <lee@kernel.org>
- Introduce ExpressWire library
- New Drivers
- Add support for ON Semiconductor NCP5623 RGB LED Driver
- New Device Support
- Add support for PM660L to Qualcomm's LPG driver
- New Functionality
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
- Fix-ups
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
- Bug Fixes
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers
-----BEGIN PGP SIGNATURE-----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=m2vY
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
Bjorn is no longer at Linaro. Update his email address to @kernel to
match the .mailmap entry.
The servers for @codeaurora are long retired and messages sent there
will bounce. Update Kiran's email address to match the .mailmap entry.
This will help anyone that is looking to reach out about this binding
and is not using .mailmap to pre-process their message.
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240202180151.4116329-1-quic_jhugo@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
NCP5623 is DC-DC multi-LED controller which can be used for RGB
illumination or backlight LCD display.
Signed-off-by: Abdel Alkuor <alkuor@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240305042049.1533279-1-alkuor@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Only few variants support PPG and store LPG per-channel data and pattern
in SDAM modules. Disallow the nvmem for other variants to make the
binding precise.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240226073713.19045-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
"qcom,pm8550-pwm" is compatible with "qcom,pm8350c-pwm" (latter used as
fallback), thus it is enough for the "if:then:" clause to check for the
presence of the fallback "qcom,pm8350c-pwm".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240226073713.19045-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Update leds-qcom-lpg binding to support LPG PPG.
Signed-off-by: Anjelique Melendez <quic_amelende@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231221185838.28440-3-quic_amelende@quicinc.com
Signed-off-by: Lee Jones <lee@kernel.org>
KTD2801 is a LED backlight driver IC found in samsung,coreprimevelte.
The brightness can be set using PWM or the ExpressWire protocol. Add
a DT binding for the KTD2801.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20240125-ktd2801-v5-3-e22da232a825@skole.hr
Signed-off-by: Lee Jones <lee@kernel.org>
active-low was lifted to the common schema for leds, but it went
unnoticed that the leds-multicolour binding had "additionalProperties:
false" where the other users had "unevaluatedProperties: false", thereby
disallowing active-low for multicolour leds. Explicitly permit it again.
Fixes: c94d178313 ("dt-bindings: net: phy: Make LED active-low property common")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document LED inactive high impedance mode to set the LED to require high
impedance configuration to be turned OFF.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240125203702.4552-3-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move LED active-low property to common.yaml. This property is currently
defined multiple times by bcm LEDs. This property will now be supported
in a generic way for PHY LEDs with the use of a generic function.
With active-low bool property not defined, active-high is always
assumed.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240125203702.4552-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
- Fix-ups
- Use/convert to new/better APIs/helpers/MACROs instead of hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid duplicates, etc
- Convert over to the new (kinda) GPIOD API
- Bug Fixes
- Fix uninitialised local variable
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEdrbJNaO+IJqU8IdIUa+KL4f8d2EFAmWmsY8ACgkQUa+KL4f8
d2E+PQ/+LP2TiwChRYvz5jKA0ys4N4yR63dQU1s9dcp49D3RjMLgokevDjSswVEJ
vGlSc3Ld50cuT6oLObI7z/ezK9/QMJ7yMFraSy+QnTOit8xdDAfJAgC6cM8GGoFU
XKLT4JkkNyhc2NypHKG/hRkMMA6EoBPr+wZTBRpQvbbFOkalTDVtcQNUgsYNr4W6
0fPT97oKgAmvzK/2KaihmfxtTE0vXon5XyZVpnTu28bqXQbQvbOgzKr5KWom022Y
XxoMVUaobZn0v/WUC1KqPY1N0tM+xH2PoOD+4jss26oV0TyxYWH9nDorF46gcJpk
CQkp5jCCra/WHR50fJx7y01GVswfKCNp2fjx9aRnhFsWfW9cu2Kdws3GfGRazPSW
AN9MJ9Eyv9Xu689hcq0wYZspfMeJe7fyDdEyeUWHCD8mF4BZHiOjeiksz2eKIuTT
Q4OykhGoh7svw2cA9EPWRvDFu4xyPA2usrDq/ClBEKVL6jE2gfSZjVmvLGGZ2Xmq
oHRHiE0qK8kWOf3n6ModbMWTZA7D9Y6tGd+rpFe7GdOfPeH1A9uYXfxoJwaUaEAr
TvcyyrsePUvHJHADwRx1SzHFuwfuNU1PgflkkdhnUopKLeDfeom0CA5a+YjP1M4Z
lHongOEdL4xAssFZU2ZXgNZiYx8su2AcUfGgnkHF1frMuoxt5Gk=
=SXS0
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Monolithic Power Systems MP3309C WLED Step-up Converter
Fix-ups:
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Device Tree Binding updates
- Demote non-kerneldoc header comments
- Improve error handling; return proper error values, simplify, avoid
duplicates, etc
- Convert over to the new (kinda) GPIOD API
Bug Fixes:
- Fix uninitialised local variable"
* tag 'backlight-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: hx8357: Convert to agnostic GPIO API
backlight: ili922x: Add an error code check in ili922x_write()
backlight: ili922x: Drop kernel-doc for local macros
backlight: mp3309c: Fix uninitialized local variable
backlight: pwm_bl: Use dev_err_probe
backlight: mp3309c: Add support for MPS MP3309C
dt-bindings: backlight: mp3309c: Remove two required properties
The led controller is a child of an SPMI PMIC, which in turn sits on an
SPMI bus.
While at it, add some newline separators to improve readability.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231130171940.12391-1-johan+linaro@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
AW200XX controllers have the capability to declare more than 0xf LEDs,
therefore, it is necessary to accept LED names using an appropriate
regex pattern.
The register offsets can be adjusted within the specified range, with
the maximum value corresponding to the highest number of LEDs that can
be connected to the controller.
Fixes: e338a05e76 ("dt-bindings: leds: Add binding for AW200xx")
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231125200519.1750-12-ddrokosov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add aw20108 compatible for Awinic AW20108 led controller.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231125200519.1750-11-ddrokosov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Get rid of the property "awinic,display-rows" and calculate it
in the driver using led definition nodes.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231125200519.1750-6-ddrokosov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Property 'enable-gpios' is optional, it can be used by the board
developer to connect AW200XX LED controller with appropriate 'enable'
GPIO pad.
Signed-off-by: Dmitry Rokosov <ddrokosov@salutedevices.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231125200519.1750-4-ddrokosov@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Allwinner A100, R329, and D1 SoCs contain an LED controller designed
to drive a series of RGB LED pixels. It supports PIO and DMA transfers,
and has configurable timing and pixel format. All three implementations
appear to be identical, so use the oldest as the fallback compatible.
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Tested-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/r/20231029212738.7871-2-samuel@sholland.org
Signed-off-by: Lee Jones <lee@kernel.org>
A valid JSON pointer should begin with a '/'. The json-schema package is
lax on this allowing either form, but that's changing in new versions.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231122205418.2482076-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
The two properties:
- max-brightness
- default brightness
are not really required, so they can be removed from the "required"
section.
The "max-brightness" is no longer used in the current version
of the driver (it was used only in the first version).
The "default-brightness", if omitted in the DT, is managed by the
device driver, using a default value. This value depends on the dimming
mode used:
- for the "analog mode", via I2C commands, this value is fixed by
hardware (=31)
- while in case of pwm mode the default used is the last value of the
brightness-levels array.
Also the brightness-levels array is not required:
- in "analog mode", via I2C commands, the brightness-level array is
fixed by hardware (0..31).;
- in pwm dimming mode, the driver uses a default array of 0..255 and
the "default-brightness" is the last one, which is "255"
NOTE: there are no compatibility problems with the previous version,
since the device driver has not yet been included in any kernel.
Only this dt-binding yaml file is already included in the current
v6.7.0-rc1 kernel version.
No developer may have used it.
Other changes:
- improve the backlight working mode description, in the "description"
section
- update the example, removing the "max-brightness" and introducing the
"brightess-levels" property
Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Link: https://lore.kernel.org/r/20231116105319.957600-2-f.suligoi@asem.it
Signed-off-by: Lee Jones <lee@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RO+Y
-----END PGP SIGNATURE-----
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- the old V4L2 core videobuf kAPI was finally removed. All media
drivers should now be using VB2 kAPI
- new automotive driver: mgb4
- new platform video driver: npcm-video
- new sensor driver: mt9m114
- new TI driver used in conjunction with Cadence CSI2RX IP to bridge
TI-specific parts
- ir-rx51 was removed and the N900 DT binding was moved to the
pwm-ir-tx generic driver
- drop atomisp-specific ov5693, using the upstream driver instead
- the camss driver has gained RDI3 support for VFE 17x
- the atomisp driver now detects ISP2400 or ISP2401 at run time. No
need to set it up at build time anymore
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM
media: venus: Fix firmware path for resources
media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by
media: venus: hfi_parser: Add check to keep the number of codecs within range
media: venus: hfi: add checks to handle capabilities from firmware
media: venus: hfi: fix the check to handle session buffer requirement
media: venus: hfi: add checks to perform sanity on queue pointers
media: platform: cadence: select MIPI_DPHY dependency
media: MAINTAINERS: Fix path for J721E CSI2RX bindings
media: cec: meson: always include meson sub-directory in Makefile
media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr()
media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()
media: mediatek: vcodec: using encoder device to alloc/free encoder memory
media: imx-jpeg: notify source chagne event when the first picture parsed
media: cx231xx: Use EP5_BUF_SIZE macro
media: siano: Drop unnecessary error check for debugfs_create_dir/file()
media: mediatek: vcodec: Handle invalid encoder vsi
media: aspeed: Drop unnecessary error check for debugfs_create_file()
Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED
Documentation: media: gen-errors.rst: fix confusing ENOTTY description
...
- Add support for a bunch more colours
- New Drivers
- Add support for Kinetic KTD2026/7 RGB/White LEDs
- New Functionality
- Add support for device to enter HW Controlled Mode to Turris Omnia LEDs
- Add support for HW Gamma Correction to Turris Omnia LEDs
- Fix-ups
- Apply new __counted_by() annotation to several data structures containing flexible arrays
- Rid the return value from Platform's .remove() operation
- Use *_cansleep() variants for instances were threads can sleep
- Improve the semantics when setting the brightness
- Generic clean-ups; code reduction, coding style, standard patterns
- Replace strncpy() with strscpy()
- Fix-up / add various documentation
- Re-author the GPIO associated Trigger to use trigger-sources
- Move to using standard APIs and helpers
- Improve error checking
- Stop using static GPIO bases
- Bug Fixes
- Fix Pointer to Enum casing warnings
- Do not pretend that I2C backed device supports SMBUS
- Ensure PWM LEDs are extinguished when disabled, rather than held in a state
- Fix 'output may be truncated' warnings
-----BEGIN PGP SIGNATURE-----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=XYXV
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Core Frameworks:
- Add support for a bunch more colours
New Drivers:
- Add support for Kinetic KTD2026/7 RGB/White LEDs
New Functionality:
- Add support for device to enter HW Controlled Mode to Turris Omnia
LEDs
- Add support for HW Gamma Correction to Turris Omnia LEDs
Fix-ups:
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Rid the return value from Platform's .remove() operation
- Use *_cansleep() variants for instances were threads can sleep
- Improve the semantics when setting the brightness
- Generic clean-ups; code reduction, coding style, standard patterns
- Replace strncpy() with strscpy()
- Fix-up / add various documentation
- Re-author the GPIO associated Trigger to use trigger-sources
- Move to using standard APIs and helpers
- Improve error checking
- Stop using static GPIO bases
Bug Fixes:
- Fix Pointer to Enum casing warnings
- Do not pretend that I2C backed device supports SMBUS
- Ensure PWM LEDs are extinguished when disabled, rather than held in
a state
- Fix 'output may be truncated' warnings"
* tag 'leds-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (43 commits)
leds: lp5521: Add an error check in lp5521_post_init_device
leds: gpio: Update headers
leds: gpio: Remove unneeded assignment
leds: gpio: Move temporary variable for struct device to gpio_led_probe()
leds: gpio: Refactor code to use devm_gpiod_get_index_optional()
leds: gpio: Utilise PTR_ERR_OR_ZERO()
leds: gpio: Keep driver firmware interface agnostic
leds: core: Refactor led_update_brightness() to use standard pattern
leds: turris-omnia: Fix brightness setting and trigger activating
leds: sc27xx: Move mutex_init() down
leds: trigger: netdev: Move size check in set_device_name
leds: Add ktd202x driver
dt-bindings: leds: Add Kinetic KTD2026/2027 LED
leds: core: Add more colors from DT bindings to led_colors
dt-bindings: leds: Last color ID is now 14 (LED_COLOR_ID_LIME)
leds: tca6507: Don't use fixed GPIO base
leds: lp3952: Convert to use maple tree register cache
leds: lm392x: Convert to use maple tree register cache
leds: aw200xx: Convert to use maple tree register cache
leds: lm3601x: Convert to use maple tree register cache
...
- Add new Device Tree binding for Monolithic Power (MPS) MP3309C step-up converter
- Document brightness-levels in bindings for; generic, LED and PWM
- Bug Fixes
- Ensure PWMs are disabled on; .shutdown(), .suspend() and .remove()
-----BEGIN PGP SIGNATURE-----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=djoj
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Add new Device Tree binding for Monolithic Power (MPS) MP3309C
step-up converter
- Document brightness-levels in bindings for; generic, LED and PWM
Bug Fixes:
- Ensure PWMs are disabled on .shutdown(), .suspend() and .remove()"
* tag 'backlight-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
dt-bindings: backlight: Add brightness-levels related common properties
backlight: pwm_bl: Disable PWM on shutdown, suspend and remove
dt-bindings: backlight: Add MPS MP3309C
Document Kinetic KTD2026/2027 LED driver devicetree bindings.
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231002-ktd202x-v6-1-26be8eefeb88@apitzsch.eu
Signed-off-by: Lee Jones <lee@kernel.org>
Increase the limit to match available values in dt-bindings/leds/common.h
Fixes: 472d7b9e81 ("dt-bindings: leds: Expand LED_COLOR_ID definitions")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231008142103.1174028-1-megi@xff.cz
Signed-off-by: Lee Jones <lee@kernel.org>
