Since there are no registers controlling the hardware parameters
IC_CAP_LOADING and IC_CLK_FREQ_OPTIMIZATION, their values can only be
declared in the device tree.
snps,bus-capacitance-pf indicates the bus capacitance in picofarads (pF).
It affects the high and low pulse width of SCL line in high speed mode.
The legal values for this property are 100 and 400 only, and default
value is 100. This property corresponds to IC_CAP_LOADING.
snps,clk-freq-optimized indicates whether the hardware reduce its
internal clock frequency by reducing the internal latency required to
generate the high period and low period of SCL line. This property
corresponds to IC_CLK_FREQ_OPTIMIZATION.
The driver can calculate the high period count and low period count of
SCL line for high speed mode based on these two properties.
Signed-off-by: Michael Wu <michael.wu@kneron.us>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Hardware is not limited to 400kHz, its documentation does mention how to
configure it for high-speed (a specific Speed-Mode enum value and
a different bus rate clock divider register to be used).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
After EyeQ5, it is time for Mobileye EyeQ6H to reuse the Nomadik I2C
controller. Add a specific compatible because its HW integration is
slightly different from EyeQ5.
Do NOT add an example as it looks like EyeQ5 from a DT standpoint
(without the mobileye,olb property).
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The I2C controller IP used in the Allwinner A523/T527 SoCs is
compatible with the ones used in the other recent Allwinner SoCs.
Add the A523 specific compatible string to the list of existing names
falling back to the allwinner,sun8i-v536-i2c string.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add dt-schema for the I2C controller on the RTL9300 Ethernet switch
with integrated SoC.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
S32G2 and S32G3 SoCs use the same I2C controller as i.MX.
But there are small differences such as specific
<clock divider, register value> pairs.
So add new compatible strings 'nxp,s32g2-i2c'and 'nxp,s32g3-i2c'
for S32G2/S32G3 Socs.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The CCI on the Snapdragon 670 is the interface for controlling camera
hardware over I2C. Add the compatible so it can be added to the SDM670
device tree.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Theobroma Systems Mule is an MCU that emulates a set of I2C devices,
among which devices that are reachable through an I2C-mux. The devices
on the mux can be selected by writing the appropriate device number to
an I2C config register.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Farouk Bouabid <farouk.bouabid@cherry.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Just like RK356x and RK3588, RK3576 is compatible to the existing
rk3399 binding.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
'multi-master' property is defined by core i2c-controller schema in
dtschema package, so binding which references it and has
unevaluatedProperties:false, does not need to mention it. It is
completely redundant here.
Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Top level defines clocks as variable from 3 to 6 items, so each clause
in if:then: should narrow it further with explicit min and maxItems.
Without minItems, the constrain from top-level is being applied, thus
qcom,msm8996-cci allows between 3 and 4 clocks.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Properties are expected to be defined in top-level "properties:" block
and further customized in "if:then:". Only one variant has power
domains, so add respective top-level property and disallow it for other
devices.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Both xxx and xxx-names properties with variable number of items should
be constrained in each "if:then:". Add missing constraints for clocks,
since we have such for clock-names.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
"if:then:" block for Tegra114 and Tegra120 I2C controllers has the same
"then" part (same clocks), so combine them.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Document the Renesas RZ/G3S (R9A08G045) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G075).
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
I2C MUXes described by the i2c-gpio-mux sometimes need a significant
amount of time to switch from a bus to another. When a new bus is
selected, the first I2C transfer can fail if it occurs too early. There
is no way to describe this transition delay that has to be waited before
starting the first I2C transfer.
Add a 'settle-time-us' property that indicates the delay to be
respected before doing the first i2c transfer.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add sm8650 compatible consistent with CAMSS CCI interfaces.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add sm8550 compatible consistent with CAMSS CCI interfaces, the list of
clocks is reduced by removing "slow_ahb_src" clock, which is derived
from "cpas_ahb" clock.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
regarding unneeded 'driver_data' and more sanity checks in the char
device.
For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H.
- Added I2C support in the Arioha SoC by linking the Mediatek
I2C controller.
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost
warning in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by
removing unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during
suspend() before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for
spurious interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam,
nVidia Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with
the i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string
thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
AT24 EEPROM driver changes:
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)
-----BEGIN PGP SIGNATURE-----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=perV
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"The I2C core gains documentation updates for the testunit, a cleanup
regarding unneeded 'driver_data' and more sanity checks in the char
device.
For the host drivers, this release includes significant updates, with
the primary change being the renaming from "master/slave" to
"controller/target" to adhere to I2C v7 and SMBus 3.2 standards.
New Support:
- Added support for Intel Arrow Lake-H
- Added I2C support in the Arioha SoC by linking the Mediatek I2C
controller
Cleanups:
- Added the MODULE_DESCRIPTION() macro, resolving a modpost warning
in the ALi 1563 Southbridge driver.
- Constified the regmap_config declaration in the i2c-designware
driver.
- Improved the coding style in the Renesas R-Car driver by removing
unnecessary semicolons after brackets.
General improvements:
- In the OMAP device, replaced NOIRQ_SYSTEM_SLEEP_PM_OPS with
RUNTIME_PM_OPS to enable waking up the controller during suspend()
before suspend_noirq() kicks in.
- Improved logging in the Xilinx driver.
- Added a warning (WARN()) in the Renesas R-Car driver for spurious
interrupts.
DTS Changes:
- Removed address-cell and size-cell from the Atmel at91sam, nVidia
Tegra 20, and Samsung S3c2410 devices.
- Fixed Texas Instruments OMAP4 I2C controller to comply with the
i2c-controller.yaml schema.
- Improved indentation in DTS examples for several I2C devices.
- Converted the NXP LPC1788 binding to the dt-schema.
- Added documentation for the compatible string thead,th1520-i2c.
- Added the "power-domains" property for the Meson I2C driver.
AT24 EEPROM driver changes:
- add support for two new Microchip models
- document even more new models in DT bindings (those use fallback
compatibles so no code changes)"
* tag 'i2c-for-6.11-rc1-try2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (87 commits)
i2c: document new callbacks in i2c_algorithm
dt-bindings: i2c: amlogic,meson6-i2c: add optional power-domains
dt-bindings: i2c: at91: Add sama7d65 compatible string
i2c: st: reword according to newest specification
i2c: cpm: reword according to newest specification
i2c: virtio: reword according to newest specification
i2c: nvidia-gpu: reword according to newest specification
i2c: viai2c: reword according to newest specification
i2c: viperboard: reword according to newest specification
i2c: uniphier: reword according to newest specification
i2c: uniphier-f: reword according to newest specification
i2c: tiny-usb: reword according to newest specification
i2c: thunderx-pcidrv: reword according to newest specification
i2c: tegra-bpmp: reword according to newest specification
i2c: taos-evm: reword according to newest specification
i2c: sun6i-p2wi: reword according to newest specification
i2c: stm32f4: reword according to newest specification
i2c: sprd: reword according to newest specification
i2c: sis5595: reword according to newest specification
i2c: rzv2m: reword according to newest specification
...
DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface, new
Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75 GPI
DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and CSI-2
blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'
-----BEGIN PGP SIGNATURE-----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=tjMz
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
On newer SoCs, the I2C hardware can require a power domain to operate.
Since the same compatible is used for older and newer SoCs make
power-domains property optional.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add compatible string for sama7d65. Like sama7g5, it currently binds to
"microchip,sam9x60-i2c" compatible string for this driver.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Add documentation for compatible string thead,th1520-i2c which can be
used specifically for the TH1520 SoC.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Convert to json-schema for the FSI-attached I2C controller.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Ninad Palsule <ninad@linux.ibm.com>
Link: https://lore.kernel.org/r/20240522192524.3286237-12-eajames@linux.ibm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Emails to Anson Huang bounce:
Diagnostic-Code: smtp; 550 5.4.1 Recipient address rejected: Access denied.
Add IMX platform maintainers for bindings which would become orphaned.
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # for I2C
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for IIO
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240617065828.9531-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx
to newer DT schema. Created DT schema based on the .txt file
which had `compatible`, `reg`, `interrupts`, `clocks`,
`#address-cells` and `#size-cells` as required properties.
Additional changes to the original .txt binding
- added maintainer from the MAINTAINERS file.
- added resets property required by the corresponding DTS files.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kanak Shilledar <kanakshilledar@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Bindings coding style expects 2- or 4-space indentation in the DTS
example. Correct files having something odd (6- or 8-space) to 4-space
while re-ordering few properties according to DTS coding style (the
first property should be compatible, then reg/ranges). No functional
impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Reference the core I2C controller schema to properly define common
properties. This allows to drop several (now redundant) properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The reference i2c-controller.yaml already defines 'address-cells' and
'size-cells', so drop them from list of properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The reference i2c-controller.yaml already defines 'address-cells' and
'size-cells', so drop them from list of properties.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The reference i2c-controller.yaml already defines 'address-cells' and
'size-cells', so drop them from list of properties. Drop them as well
from required properties, even though i2c-controller.yaml does not
require them, because I2C controller could be enabled without any
children in DTS for user-space usage.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 1acd4577a6 ("dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
The referenced i2c-controller.yaml schema is provided by dtschema
package (outside of Linux kernel), so use full path to reference it.
Cc: stable@vger.kernel.org
Fixes: 7ea75dd386 ("dt-bindings: i2c: convert i2c-at91 to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
further deprecate class based I2C device instantiation. All users are
converted, too. Other that that, Andi collected a number if I2C host
driver patches. Those merges have their own description.
-----BEGIN PGP SIGNATURE-----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=viLd
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"i2c core removes an argument from the i2c_mux_add_adapter() call to
further deprecate class based I2C device instantiation. All users are
converted, too.
Other that that, Andi collected a number if I2C host driver patches.
Those merges have their own description"
* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
i2c: mux: Remove class argument from i2c_mux_add_adapter()
i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
i2c: acpi: Unbind mux adapters before delete
i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
i2c: pxa: use 'time_left' variable with wait_event_timeout()
i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
i2c: rk3x: use 'time_left' variable with wait_event_timeout()
i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
i2c: st: use 'time_left' variable with wait_for_completion_timeout()
i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
...
Add sc8280xp compatible consistent with recent CAMSS CCI interfaces.
sc8280xp has the following clock list and so requires its own compat
string and sc8280xp specific clock definition in the yaml.
- const: camnoc_axi
- const: slow_ahb_src
- const: cpas_ahb
- const: cci
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Document support for the I2C Bus Interface (RIIC) available in the
Renesas RZ/V2H(P) (R9A09G057) SoC.
The RIIC interface in the Renesas RZ/V2H(P) differs from RZ/A in a
couple of ways:
- Register offsets for the RZ/V2H(P) SoC differ from those of the
RZ/A SoC.
- RZ/V2H register access is limited to 8-bit, whereas RZ/A supports
8/16/32-bit.
- RZ/V2H has bit differences in the slave address register.
To accommodate these differences, a new compatible string
"renesas,riic-r9a09g057" is added.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Convert the NXP PNX I2C Controller bindings to DT schema.
Keep only one example in DT schema to remove redundancy.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Animesh Agarwal <animeshagarwal28@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Description of this property is added to all peripheral binding files of
the peripheral under the STM32 firewall controller. It allows an accurate
representation of the hardware, where various peripherals are connected
to a firewall bus. The firewall can then check the peripheral accesses
before allowing its device to probe.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The OV7251 sensor only has a single data lane, so 2 entries is not valid.
Fix this to be 1 entry as the schema specifies.
The schema validation doesn't catch this currently due to some limitations
in handling of arrays vs. matrices, but a fix is being worked on.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
Two device trees have been added, but those need to be applied
elsewhere.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZfLnNBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uSSkBAKl75gzjiN2AglPaTUDfhCeux8yf
mISgvl4MWKCXXsZ5AQDjRiG+whrV7knOjS7L/r5owb30uF+Bv3d29sG4LVNsBQ==
=RubU
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.9-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Théo adds support for the Mobileye EyeQ5-I2C in the bindings.
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to use
it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to cover
some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'
-----BEGIN PGP SIGNATURE-----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=YzNN
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
and are described by Andi in the merge commit
-----BEGIN PGP SIGNATURE-----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=Hm22
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"Minor changes to the I2C core. Most changes are in drivers:
The i801 and designware drivers received most of the changes,
including refactorings and some additions.
Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.
The Cadence driver now supports system suspend and resume.
The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.
The pca954x mux driver now supports additional configurations, such as
isolating faulty channels and flushing stuck buses, among others.
Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4"
* tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: sprd: Convert to platform remove callback returning void
Documentation: i2c: Document that client auto-detection is a legacy mechanism
i2c: remove redundant condition
i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
i2c: cadence: Add system suspend and resume PM support
i2c: mpc: remove outdated macro
i2c: mpc: use proper binding for transfer timeouts
dt-bindings: i2c: mpc: use proper binding for transfer timeouts
i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
i2c: constify the struct device_type usage
i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
i2c: designware: Use accessors to DW_IC_INTR_MASK register
i2c: designware: Do not enable interrupts shortly in polling mode
i2c: designware: Uniform initialization flow for polling mode
dt-bindings: i2c: at91: Add sam9x7 compatible string
dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
i2c: Remove redundant comparison in npcm_i2c_reg_slave
...
Add EyeQ5 bindings to the existing Nomadik I2C dt-bindings. Add the
EyeQ5-specific property behind a conditional. Add an example for this
compatible.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
"i2c-scl-clk-low-timeout-us" has flaws in itself and the usage here is
all wrong. The driver doesn't use it as a maximum time for clock
stretching but the maximum time for a total transfer. We already have
a binding for the latter. Convert the wrong binding from examples.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Everything in i2c.txt is covered by schemas/i2c/i2c-controller.yaml in
dtschema project, so remove i2c.txt and update links to it in the tree.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240222174343.3482354-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The 'phandle-array' type is a bit ambiguous. It can be either just an
array of phandles or an array of phandles plus args. "i2c-parent" is
the former and needs to constrain each entry to a single phandle value.
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240124190552.1551929-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
