Adds compatible strings for the Kobo Clara 2E eBook reader.
There are two variants differing in the EPD PMIC used.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds support for the Nitrogen8MP SMARC System on Module and
the Nitrogen8MP Universal SMARC Carrier Board.
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds support for the Gateworks GW82XX-2X development kit
based on a GW82XX baseboard and a GW702X System On Module.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document the DH electronics i.MX6DL DHCOM SoM and a PDK2 evaluation board.
The evaluation board features three serial ports, USB OTG, USB host with
an USB hub, Fast or Gigabit ethernet, eMMC, uSD, SD, analog audio, PCIe
and HDMI video output.
All of the aforementioned features except for mSATA are supported, mSATA
is not available on i.MX6DL and is only available on DHCOM populated with
i.MX6Q SoC which is already supported upstream.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier
board. This system is populated with serial console, EQoS ethernet, eMMC, SD,
SPI NOR, LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Document support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board.
This system is populated with two ethernet ports, two CANs, RS485 and RS232,
USB, capacitive buttons and an OLED display.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add new board from the Y Soft IOTA family. This one is based on the i.MX8MP
SoC. It is basically a stripped-down clone of the EVK board with some minor
additions.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Comvetia LXR board is based on a i.MX6Q phyFLEX-i.MX6 Quad SoM
from Phytec.
Add an entry for this board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the bindings for the Kontron i.MX8MP OSM-S SoM and carrier
boards.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adds support for the Variscite VAR-SOM-MX8MP System on Module and
the Variscite Symphony Evaluation Kit.
Signed-off-by: Tarang Raval <tarang.raval@siliconsignals.io>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Variscite VAR-SOM-MX8MM System-on-Module cannot be used alone
without motherboard, so drop the usage of its compatible alone.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW7905 was renamed to GW7500 before production release.
While we typically do not change compatibles, the GW7905 was never
released before its product name was changed to a GW7500.
The use the the 'xx' wildcard is to denote the fact that this
device-tree can support range of board models from GW7500 to GW7599 as
has been done historically with the Gateworks baseboards to support
various build customizatoins based on the same PCB.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the bindings for the Kontron i.MX93 OSM-S SoM and BL carrier
board.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQ-Systems is written with a hyphen. The incorrect spelling with spaces
is therefore corrected.
While at it, comments are added to TQMa6ULLx.
Signed-off-by: Max Merchel <Max.Merchel@ew.tq-group.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add compatible string fsl-ls2081a-rdb for ls2081a rdb boards to fix below
warning:
arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dtb: /:
failed to match any schema with compatible: ['fsl,ls2081a-rdb', 'fsl,ls2081a']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Kontron SMARC-sAMX6i is just a module. There was no device tree for
an actual board for now. Document the binding to use the module on the
evaluation carrier.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
MBa8MP-RAS314 is an SBC based on the embedded module TQMa8MPxL.
All relevant interfaces integrated in the CPU have been implemented on
the MBa8MP-RAS314 for (an) industrial usage. Due to the numerous interfaces
and the small size of this SBC the use in different applications
is possible without the need of a [special,custom] design.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove Li Yang from all device tree bindings because mails to this
address are bouncing.
Commit fbdd90334a ("MAINTAINERS: Drop Li Yang as their email address
stopped working") already removed the entry from the MAINTAINERS but
didn't address all the in-file entries of the device tree bindings.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Toradex Colibri iMX8DX SoM. As the i.MX8QXP variant is
already supported, update the description with i.MX8DX and add
'fsl,imx8dx' item as well.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
'toradex,colibri-imx8x' is already present as a constant value for
'i.MX8QP Board with Toradex Colibri iMX8X Modules', so there is no need
to keep it twice as a enum value for 'i.MX8QXP based Boards'.
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT compatible string for Emcraft NavQ+ kit based on
the i.MX8M Plus SoC from NXP
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
NPi i.MX6ULL eMMC/NAND is Seed Studios SoM using i.MX6ULL.
Development baords can be either based on NAND or eMMC
SoM.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add compatible value for i.MX6ULL based UNI-T UTi260B thermal camera.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Company name in compatible description appears twice, which is not really
helpful, so remove it from product name.
The board is a prototype developed by my company and we are still at the
prototype stage, so there is zero ABI impact.
Fixes: bb405e8b53 ("dt-bindings: arm: fsl: add RVE gateway board")
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the toradex,apalis-imx8-eval-v1.2 and
toradex,apalis-imx8-v1.1-eval-v1.2 compatible strings for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that board version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis-imx8-eval and toradex,apalis-v1.1-imx8-eval
compatible strings should be used for both v1.0 and v1.1.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add the toradex,apalis_imx6q-eval-v1.2 compatible string for version 1.2
of the Apalis Evaluation Board.
Version v1.2 includes the following changes compared to v1.1:
- 8-bit MMC connector replaced with a 4-bit uSD connector.
- Audio codec NAU88C22 added.
- M24C02 EEPROM i2c added.
- MIPI-CSI-2 connector directly to the board added.
- PCIe switch PEX8605 removed and PCIe now is routed directly to Mini
PCIe connector.
- Power measurement IC INA219 added.
- Replaced DVI with HDMI connector.
- Single-channel USB to UART converter replaced with four-channel USB
to UART/JTAG.
- Temperature sensor TMP75 added.
Please note that version v1.0 (which reached EOL) is compatible with
v1.1, therefore toradex,apalis_imx6q-eval compatible string should be
used for both v1.0 and v1.1.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Variscite i.MX93 VAR-SOM-MX93 SoM with Symphony board.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMa8Xx is a SOM series featuring NXP i.MX8X SoC.
They are called TQMa8XQP and TQMa8XDP respectively.
MBa8Xx is an evaluation mainboard for this SOM
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT compatible string for Dimonoff gateway EVK board based on a
Variscite VAR-SOM-NANO with a NXP MX8MN nano CPU.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMLX2160A is a TQ-Systems GmbH SoM using the LX2160A SoC.
MBLX2160a is the starterkit baseboard for TQMLX2160A.
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin
IMX8MP SoM. Mallow is a low-cost carrier board in the Verdin family with
a small form factor and build for volume production making it ideal for
industrial and embedded applications.
https://www.toradex.com/products/carrier-board/mallow-carrier-board
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add Mallow carrier board for wifi and nonwifi variants of Toradex Verdin
IMX8MM SoM. Mallow is a low-cost carrier board in the Verdin family with
a small form factor and build for volume production making it ideal for
industrial and embedded applications.
https://www.toradex.com/products/carrier-board/mallow-carrier-board
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DT compatible string for RVE gateway board based on a Variscite
VAR-SOM-NANO with a NXP MX8MN nano CPU.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMLS1088a uses a common board layout with TQMLS1043A/TQMLS1046A.
MBLS10XXA is a starterkit baseboard usable for these SOMs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
TQMLS1043A and TQMLS1046A use the LS1043A LS1046A SOC on a common
layout.
MBLS10XXA is a starterkit baseboard usable for both SOMs.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SolidRun now have 2 product lines around NXP Layerscape SoC:
- LX2160A COM Express 7
- LX2162A System on Module
LX2162 is a smaller package and reduced feature set to LX2160A;
LX2162 SoM is also a smaller form factor and reduced feature set to CEX.
Since both product lines are physically incompatible,
the existing group "SolidRun LX2160A based Boards" has been renamed to
include "CEX" in its name, meaning products based on LX2160A COM Express
Module, following this pattern:
"solidrun,<board>", "solidrun,lx2160a-cex", "fsl,lx2160a"
Add DT compatible for both SolidRun LX2162A SoM, and LX2162 Clearfog
boards to a new group based on LX2162A SoM, following this pattern:
"solidrun,<board>", "solidrun,lx2162a-som", "fsl,lx2160a"
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add dt compatible for the phyGATE-Tauri-L board. It uses the
phyCORE-i.MX8MM SoM
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There are some imx23 based boards that are not documented.
Add them to the list of supportted i.MX23 boards.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for Variscite i.MX6Q VAR-SOM-MX6 SoM with Custom Board.
Cc: Pierluigi Passaro <pierluigi.p@variscite.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share code
with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check
for unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450 Inline
Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt controller,
Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations
-----BEGIN PGP SIGNATURE-----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=kl+z
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add support for generating DT nodes for PCI devices. This is the
groundwork for applying overlays to PCI devices containing
non-discoverable downstream devices.
- DT unittest additions to check reverted changesets, to test for
refcount issues, and to test unresolved symbols. Also, various
clean-ups of the unittest along the way.
- Refactor node and property manipulation functions to better share
code with old API and changeset API
- Refactor changeset print functions to a common implementation
- Move some platform_device specific functions into of_platform.c
Bindings:
- Treewide fixing of typos
- Treewide clean-up of SPDX tags to use 'OR' consistently
- Last chunk of dropping unnecessary quotes. With that, the check for
unnecessary quotes is enabled in yamllint.
- Convert ftgmac100, zynqmp-genpd, pps-gpio, syna,rmi4, and qcom,ssbi
bindings to DT schema format
- Add Allwinner V3s xHCI USB, Saef SF-TC154B display, QCom SM8450
Inline Crypto Engine, QCom SM6115 UFS, QCom SDM670 PDC interrupt
controller, Arm 2022 Cortex cores, and QCom IPQ9574 Crypto bindings
- Fixes for Rockchip DWC PCI binding
- Ensure all properties are evaluated on USB connector schema
- Fix dt-check-compatible script to find of_device_id instances with
compiler annotations"
* tag 'devicetree-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (64 commits)
dt-bindings: usb: Add V3s compatible string for OHCI
dt-bindings: usb: Add V3s compatible string for EHCI
dt-bindings: display: panel: mipi-dbi-spi: add Saef SF-TC154B
dt-bindings: vendor-prefixes: document Saef Technology
dt-bindings: thermal: lmh: update maintainer address
of: unittest: Fix of_unittest_pci_node() kconfig dependencies
dt-bindings: crypto: ice: Document sm8450 inline crypto engine
dt-bindings: ufs: qcom: Add ICE to sm8450 example
dt-bindings: ufs: qcom: Add sm6115 binding
dt-bindings: ufs: qcom: Add reg-names property for ICE
dt-bindings: yamllint: Enable quoted string check
dt-bindings: Drop remaining unneeded quotes
of: unittest-data: Fix whitespace - angular brackets
of: unittest-data: Fix whitespace - indentation
of: unittest-data: Fix whitespace - blank lines
of: unittest-data: Convert remaining overlay DTS files to sugar syntax
of: overlay: unittest: Add test for unresolved symbol
of: unittest: Add separators to of_unittest_overlay_high_level()
of: unittest: Cleanup partially-applied overlays
of: unittest: Merge of_unittest_apply{,_revert}_overlay_check()
...
