mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
dt-bindings: pinctrl: qcom,pmic-mpp: Convert qcom pmic mpp bindings to YAML
Convert Qualcomm PMIC MPP bindings from .txt to .yaml format. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-2-dmitry.baryshkov@linaro.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Dmitry Baryshkov
Linus Walleij
parent
02725b0c89
commit
f9a06b8109
2 changed files with 188 additions and 187 deletions
|
|
@ -1,187 +0,0 @@
|
||||||
Qualcomm PMIC Multi-Purpose Pin (MPP) block
|
|
||||||
|
|
||||||
This binding describes the MPP block(s) found in the 8xxx series
|
|
||||||
of PMIC's from Qualcomm.
|
|
||||||
|
|
||||||
- compatible:
|
|
||||||
Usage: required
|
|
||||||
Value type: <string>
|
|
||||||
Definition: Should contain one of:
|
|
||||||
"qcom,pm8018-mpp",
|
|
||||||
"qcom,pm8019-mpp",
|
|
||||||
"qcom,pm8038-mpp",
|
|
||||||
"qcom,pm8058-mpp",
|
|
||||||
"qcom,pm8821-mpp",
|
|
||||||
"qcom,pm8841-mpp",
|
|
||||||
"qcom,pm8916-mpp",
|
|
||||||
"qcom,pm8917-mpp",
|
|
||||||
"qcom,pm8921-mpp",
|
|
||||||
"qcom,pm8941-mpp",
|
|
||||||
"qcom,pm8950-mpp",
|
|
||||||
"qcom,pmi8950-mpp",
|
|
||||||
"qcom,pm8994-mpp",
|
|
||||||
"qcom,pma8084-mpp",
|
|
||||||
"qcom,pmi8994-mpp",
|
|
||||||
|
|
||||||
And must contain either "qcom,spmi-mpp" or "qcom,ssbi-mpp"
|
|
||||||
if the device is on an spmi bus or an ssbi bus respectively.
|
|
||||||
|
|
||||||
- reg:
|
|
||||||
Usage: required
|
|
||||||
Value type: <prop-encoded-array>
|
|
||||||
Definition: Register base of the MPP block and length.
|
|
||||||
|
|
||||||
- interrupts:
|
|
||||||
Usage: required
|
|
||||||
Value type: <prop-encoded-array>
|
|
||||||
Definition: Must contain an array of encoded interrupt specifiers for
|
|
||||||
each available MPP
|
|
||||||
|
|
||||||
- gpio-controller:
|
|
||||||
Usage: required
|
|
||||||
Value type: <none>
|
|
||||||
Definition: Mark the device node as a GPIO controller
|
|
||||||
|
|
||||||
- #gpio-cells:
|
|
||||||
Usage: required
|
|
||||||
Value type: <u32>
|
|
||||||
Definition: Must be 2;
|
|
||||||
the first cell will be used to define MPP number and the
|
|
||||||
second denotes the flags for this MPP
|
|
||||||
|
|
||||||
Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for
|
|
||||||
a general description of GPIO and interrupt bindings.
|
|
||||||
|
|
||||||
Please refer to pinctrl-bindings.txt in this directory for details of the
|
|
||||||
common pinctrl bindings used by client devices, including the meaning of the
|
|
||||||
phrase "pin configuration node".
|
|
||||||
|
|
||||||
The pin configuration nodes act as a container for an arbitrary number of
|
|
||||||
subnodes. Each of these subnodes represents some desired configuration for a
|
|
||||||
pin or a list of pins. This configuration can include the
|
|
||||||
mux function to select on those pin(s), and various pin configuration
|
|
||||||
parameters, as listed below.
|
|
||||||
|
|
||||||
SUBNODES:
|
|
||||||
|
|
||||||
The name of each subnode is not important; all subnodes should be enumerated
|
|
||||||
and processed purely based on their content.
|
|
||||||
|
|
||||||
Each subnode only affects those parameters that are explicitly listed. In
|
|
||||||
other words, a subnode that lists a mux function but no pin configuration
|
|
||||||
parameters implies no information about any pin configuration parameters.
|
|
||||||
Similarly, a pin subnode that describes a pullup parameter implies no
|
|
||||||
information about e.g. the mux function.
|
|
||||||
|
|
||||||
The following generic properties as defined in pinctrl-bindings.txt are valid
|
|
||||||
to specify in a pin configuration subnode:
|
|
||||||
|
|
||||||
- pins:
|
|
||||||
Usage: required
|
|
||||||
Value type: <string-array>
|
|
||||||
Definition: List of MPP pins affected by the properties specified in
|
|
||||||
this subnode. Valid pins are:
|
|
||||||
mpp1-mpp4 for pm8841
|
|
||||||
mpp1-mpp4 for pm8916
|
|
||||||
mpp1-mpp8 for pm8941
|
|
||||||
mpp1-mpp4 for pm8950
|
|
||||||
mpp1-mpp4 for pmi8950
|
|
||||||
mpp1-mpp4 for pma8084
|
|
||||||
|
|
||||||
- function:
|
|
||||||
Usage: required
|
|
||||||
Value type: <string>
|
|
||||||
Definition: Specify the alternative function to be configured for the
|
|
||||||
specified pins. Valid values are:
|
|
||||||
"digital",
|
|
||||||
"analog",
|
|
||||||
"sink"
|
|
||||||
|
|
||||||
- bias-disable:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <none>
|
|
||||||
Definition: The specified pins should be configured as no pull.
|
|
||||||
|
|
||||||
- bias-pull-up:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <u32>
|
|
||||||
Definition: The specified pins should be configured as pull up.
|
|
||||||
Valid values are 600, 10000 and 30000 in bidirectional mode
|
|
||||||
only, i.e. when operating in qcom,analog-mode and input and
|
|
||||||
outputs are enabled. The hardware ignores the configuration
|
|
||||||
when operating in other modes.
|
|
||||||
|
|
||||||
- bias-high-impedance:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <none>
|
|
||||||
Definition: The specified pins will put in high-Z mode and disabled.
|
|
||||||
|
|
||||||
- input-enable:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <none>
|
|
||||||
Definition: The specified pins are put in input mode, i.e. their input
|
|
||||||
buffer is enabled
|
|
||||||
|
|
||||||
- output-high:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <none>
|
|
||||||
Definition: The specified pins are configured in output mode, driven
|
|
||||||
high.
|
|
||||||
|
|
||||||
- output-low:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <none>
|
|
||||||
Definition: The specified pins are configured in output mode, driven
|
|
||||||
low.
|
|
||||||
|
|
||||||
- power-source:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <u32>
|
|
||||||
Definition: Selects the power source for the specified pins. Valid power
|
|
||||||
sources are defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
|
||||||
|
|
||||||
- qcom,analog-level:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <u32>
|
|
||||||
Definition: Selects the source for analog output. Valued values are
|
|
||||||
defined in <dt-binding/pinctrl/qcom,pmic-mpp.h>
|
|
||||||
PMIC_MPP_AOUT_LVL_*
|
|
||||||
|
|
||||||
- qcom,dtest:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <u32>
|
|
||||||
Definition: Selects which dtest rail to be routed in the various functions.
|
|
||||||
Valid values are 1-4
|
|
||||||
|
|
||||||
- qcom,amux-route:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <u32>
|
|
||||||
Definition: Selects the source for analog input. Valid values are
|
|
||||||
defined in <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
|
||||||
PMIC_MPP_AMUX_ROUTE_CH5, PMIC_MPP_AMUX_ROUTE_CH6...
|
|
||||||
- qcom,paired:
|
|
||||||
Usage: optional
|
|
||||||
Value type: <none>
|
|
||||||
Definition: Indicates that the pin should be operating in paired mode.
|
|
||||||
|
|
||||||
Example:
|
|
||||||
|
|
||||||
mpps@a000 {
|
|
||||||
compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
|
|
||||||
reg = <0xa000>;
|
|
||||||
gpio-controller;
|
|
||||||
#gpio-cells = <2>;
|
|
||||||
interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
|
|
||||||
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pm8841_default>;
|
|
||||||
|
|
||||||
pm8841_default: default {
|
|
||||||
gpio {
|
|
||||||
pins = "mpp1", "mpp2", "mpp3", "mpp4";
|
|
||||||
function = "digital";
|
|
||||||
input-enable;
|
|
||||||
power-source = <PM8841_MPP_S3>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
188
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
Normal file
188
Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
Normal file
|
|
@ -0,0 +1,188 @@
|
||||||
|
# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
|
||||||
|
%YAML 1.2
|
||||||
|
---
|
||||||
|
$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-mpp.yaml#
|
||||||
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||||
|
|
||||||
|
title: Qualcomm PMIC Multi-Purpose Pin (MPP) block
|
||||||
|
|
||||||
|
maintainers:
|
||||||
|
- Bjorn Andersson <bjorn.andersson@linaro.org>
|
||||||
|
|
||||||
|
description:
|
||||||
|
This binding describes the MPP block(s) found in the 8xxx series of
|
||||||
|
PMIC's from Qualcomm.
|
||||||
|
|
||||||
|
properties:
|
||||||
|
compatible:
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- qcom,pm8018-mpp
|
||||||
|
- qcom,pm8019-mpp
|
||||||
|
- qcom,pm8038-mpp
|
||||||
|
- qcom,pm8058-mpp
|
||||||
|
- qcom,pm8821-mpp
|
||||||
|
- qcom,pm8841-mpp
|
||||||
|
- qcom,pm8916-mpp
|
||||||
|
- qcom,pm8917-mpp
|
||||||
|
- qcom,pm8921-mpp
|
||||||
|
- qcom,pm8941-mpp
|
||||||
|
- qcom,pm8950-mpp
|
||||||
|
- qcom,pmi8950-mpp
|
||||||
|
- qcom,pm8994-mpp
|
||||||
|
- qcom,pma8084-mpp
|
||||||
|
- qcom,pmi8994-mpp
|
||||||
|
|
||||||
|
- enum:
|
||||||
|
- qcom,spmi-mpp
|
||||||
|
- qcom,ssbi-mpp
|
||||||
|
|
||||||
|
reg:
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
interrupts:
|
||||||
|
minItems: 1
|
||||||
|
maxItems: 12
|
||||||
|
description:
|
||||||
|
Must contain an array of encoded interrupt specifiers for
|
||||||
|
each available MPP
|
||||||
|
|
||||||
|
gpio-controller: true
|
||||||
|
gpio-line-names: true
|
||||||
|
|
||||||
|
gpio-ranges:
|
||||||
|
maxItems: 1
|
||||||
|
|
||||||
|
'#gpio-cells':
|
||||||
|
const: 2
|
||||||
|
description:
|
||||||
|
The first cell will be used to define gpio number and the
|
||||||
|
second denotes the flags for this gpio
|
||||||
|
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
required:
|
||||||
|
- compatible
|
||||||
|
- reg
|
||||||
|
- gpio-controller
|
||||||
|
- '#gpio-cells'
|
||||||
|
- gpio-ranges
|
||||||
|
|
||||||
|
patternProperties:
|
||||||
|
'-state$':
|
||||||
|
oneOf:
|
||||||
|
- $ref: "#/$defs/qcom-pmic-mpp-state"
|
||||||
|
- patternProperties:
|
||||||
|
"mpp":
|
||||||
|
$ref: "#/$defs/qcom-pmic-mpp-state"
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
$defs:
|
||||||
|
qcom-pmic-mpp-state:
|
||||||
|
type: object
|
||||||
|
allOf:
|
||||||
|
- $ref: "pinmux-node.yaml"
|
||||||
|
- $ref: "pincfg-node.yaml"
|
||||||
|
properties:
|
||||||
|
pins:
|
||||||
|
description:
|
||||||
|
List of gpio pins affected by the properties specified in
|
||||||
|
this subnode. Valid pins are
|
||||||
|
- mpp1-mpp4 for pm8841
|
||||||
|
- mpp1-mpp4 for pm8916
|
||||||
|
- mpp1-mpp8 for pm8941
|
||||||
|
- mpp1-mpp4 for pm8950
|
||||||
|
- mpp1-mpp4 for pmi8950
|
||||||
|
- mpp1-mpp4 for pma8084
|
||||||
|
|
||||||
|
items:
|
||||||
|
pattern: "^mpp([0-9]+)$"
|
||||||
|
|
||||||
|
function:
|
||||||
|
items:
|
||||||
|
- enum:
|
||||||
|
- digital
|
||||||
|
- analog
|
||||||
|
- sink
|
||||||
|
|
||||||
|
bias-disable: true
|
||||||
|
bias-pull-up: true
|
||||||
|
bias-high-impedance: true
|
||||||
|
input-enable: true
|
||||||
|
output-high: true
|
||||||
|
output-low: true
|
||||||
|
power-source: true
|
||||||
|
|
||||||
|
qcom,analog-level:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description:
|
||||||
|
Selects the source for analog output. Valued values are defined in
|
||||||
|
<dt-binding/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AOUT_LVL_*
|
||||||
|
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||||
|
|
||||||
|
qcom,atest:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description:
|
||||||
|
Selects ATEST rail to route to GPIO when it's
|
||||||
|
configured in analog-pass-through mode.
|
||||||
|
enum: [1, 2, 3, 4]
|
||||||
|
|
||||||
|
qcom,dtest:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description:
|
||||||
|
Selects DTEST rail to route to GPIO when it's
|
||||||
|
configured as digital input.
|
||||||
|
enum: [1, 2, 3, 4]
|
||||||
|
|
||||||
|
qcom,amux-route:
|
||||||
|
$ref: /schemas/types.yaml#/definitions/uint32
|
||||||
|
description:
|
||||||
|
Selects the source for analog input. Valid values are defined in
|
||||||
|
<dt-bindings/pinctrl/qcom,pmic-mpp.h> PMIC_MPP_AMUX_ROUTE_CH5,
|
||||||
|
PMIC_MPP_AMUX_ROUTE_CH6...
|
||||||
|
enum: [0, 1, 2, 3, 4, 5, 6, 7]
|
||||||
|
|
||||||
|
qcom,paired:
|
||||||
|
- description:
|
||||||
|
Indicates that the pin should be operating in paired mode.
|
||||||
|
|
||||||
|
required:
|
||||||
|
- pins
|
||||||
|
- function
|
||||||
|
|
||||||
|
additionalProperties: false
|
||||||
|
|
||||||
|
examples:
|
||||||
|
- |
|
||||||
|
#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
|
||||||
|
|
||||||
|
pm8841_mpp: mpps@a000 {
|
||||||
|
compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
|
||||||
|
reg = <0xa000 0>;
|
||||||
|
gpio-controller;
|
||||||
|
#gpio-cells = <2>;
|
||||||
|
gpio-ranges = <&pm8841_mpp 0 0 4>;
|
||||||
|
gpio-line-names = "VDD_PX_BIAS", "WLAN_LED_CTRL",
|
||||||
|
"BT_LED_CTRL", "GPIO-F";
|
||||||
|
interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
|
||||||
|
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pm8841_default>;
|
||||||
|
|
||||||
|
mpp1-state {
|
||||||
|
pins = "mpp1";
|
||||||
|
function = "digital";
|
||||||
|
input-enable;
|
||||||
|
power-source = <PM8841_MPP_S3>;
|
||||||
|
};
|
||||||
|
|
||||||
|
default-state {
|
||||||
|
gpio-mpp {
|
||||||
|
pins = "mpp1", "mpp2", "mpp3", "mpp4";
|
||||||
|
function = "digital";
|
||||||
|
input-enable;
|
||||||
|
power-source = <PM8841_MPP_S3>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
...
|
||||||
Loading…
Add table
Reference in a new issue