mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
net: phy: microchip: Reset LAN88xx PHY to ensure clean link state on LAN7800/7850
Fix outdated MII_LPA data in the LAN88xx PHY, which is used in LAN7800
and LAN7850 USB Ethernet controllers. Due to a hardware limitation, the
PHY cannot reliably update link status after parallel detection when the
link partner does not support auto-negotiation. To mitigate this, add a
PHY reset in `lan88xx_link_change_notify()` when `phydev->state` is
`PHY_NOLINK`, ensuring the PHY starts in a clean state and reports
accurate fixed link parallel detection results.
Fixes: 792aec47d5
("add microchip LAN88xx phy driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241125084050.414352-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
parent
51ee075d69
commit
ccb989e4d1
1 changed files with 21 additions and 0 deletions
|
@ -351,6 +351,22 @@ static int lan88xx_config_aneg(struct phy_device *phydev)
|
|||
static void lan88xx_link_change_notify(struct phy_device *phydev)
|
||||
{
|
||||
int temp;
|
||||
int ret;
|
||||
|
||||
/* Reset PHY to ensure MII_LPA provides up-to-date information. This
|
||||
* issue is reproducible only after parallel detection, as described
|
||||
* in IEEE 802.3-2022, Section 28.2.3.1 ("Parallel detection function"),
|
||||
* where the link partner does not support auto-negotiation.
|
||||
*/
|
||||
if (phydev->state == PHY_NOLINK) {
|
||||
ret = phy_init_hw(phydev);
|
||||
if (ret < 0)
|
||||
goto link_change_notify_failed;
|
||||
|
||||
ret = _phy_start_aneg(phydev);
|
||||
if (ret < 0)
|
||||
goto link_change_notify_failed;
|
||||
}
|
||||
|
||||
/* At forced 100 F/H mode, chip may fail to set mode correctly
|
||||
* when cable is switched between long(~50+m) and short one.
|
||||
|
@ -377,6 +393,11 @@ static void lan88xx_link_change_notify(struct phy_device *phydev)
|
|||
temp |= LAN88XX_INT_MASK_MDINTPIN_EN_;
|
||||
phy_write(phydev, LAN88XX_INT_MASK, temp);
|
||||
}
|
||||
|
||||
return;
|
||||
|
||||
link_change_notify_failed:
|
||||
phydev_err(phydev, "Link change process failed %pe\n", ERR_PTR(ret));
|
||||
}
|
||||
|
||||
/**
|
||||
|
|
Loading…
Add table
Reference in a new issue