public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-10-31 16:54:21 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

ASoC: atmel: tse850: add ASoC driver for the Axentia TSE-850

Browse source 
The TSE-850 is an FM Transmitter Station Equipment, designed to generate
baseband signals for FM, mainly the DARC subcarrier, but other signals
are also possible.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Peter Rosin 2016-11-15 19:38:15 +01:00 • committed by Mark Brown
parent c821d30148
commit aa43112445
4 changed files with 485 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
MAINTAINERS
View file

@ -2322,6 +2322,7 @@ M: Peter Rosin <peda@axentia.se>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/sound/axentia,*
F: sound/soc/atmel/tse850-pcm5142.c
AZ6007 DVB DRIVER
M: Mauro Carvalho Chehab <mchehab@s-opensource.com>

10
sound/soc/atmel/Kconfig
View file

@ -78,4 +78,14 @@ config SND_ATMEL_SOC_PDMIC
help
Say Y if you want to add support for Atmel ASoC driver for boards using
PDMIC.
config SND_ATMEL_SOC_TSE850_PCM5142
tristate "ASoC driver for the Axentia TSE-850"
depends on ARCH_AT91 && OF
depends on ATMEL_SSC && I2C
select SND_ATMEL_SOC_SSC_DMA
select SND_SOC_PCM512x_I2C
help
Say Y if you want to add support for the ASoC driver for the
Axentia TSE-850 with a PCM5142 codec.
endif

2
sound/soc/atmel/Makefile
View file

@ -13,9 +13,11 @@ snd-atmel-soc-wm8904-objs := atmel_wm8904.o
snd-soc-sam9x5-wm8731-objs := sam9x5_wm8731.o
snd-atmel-soc-classd-objs := atmel-classd.o
snd-atmel-soc-pdmic-objs := atmel-pdmic.o
snd-atmel-soc-tse850-pcm5142-objs := tse850-pcm5142.o
obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o
obj-$(CONFIG_SND_ATMEL_SOC_WM8904) += snd-atmel-soc-wm8904.o
obj-$(CONFIG_SND_AT91_SOC_SAM9X5_WM8731) += snd-soc-sam9x5-wm8731.o
obj-$(CONFIG_SND_ATMEL_SOC_CLASSD) += snd-atmel-soc-classd.o
obj-$(CONFIG_SND_ATMEL_SOC_PDMIC) += snd-atmel-soc-pdmic.o
obj-$(CONFIG_SND_ATMEL_SOC_TSE850_PCM5142) += snd-atmel-soc-tse850-pcm5142.o

472
sound/soc/atmel/tse850-pcm5142.c Normal file
View file

@ -0,0 +1,472 @@
/*
* TSE-850 audio - ASoC driver for the Axentia TSE-850 with a PCM5142 codec
*
* Copyright (C) 2016 Axentia Technologies AB
*
* Author: Peter Rosin <peda@axentia.se>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* loop1 relays
* IN1 +---o +------------+ o---+ OUT1
* \ /
* + +
* | / |
* +--o +--. |
* | add | |
* | V |
* | .---. |
* DAC +----------->|Sum|---+
* | '---' |
* | |
* + +
*
* IN2 +---o--+------------+--o---+ OUT2
* loop2 relays
*
* The 'loop1' gpio pin controlls two relays, which are either in loop
* position, meaning that input and output are directly connected, or
* they are in mixer position, meaning that the signal is passed through
* the 'Sum' mixer. Similarly for 'loop2'.
*
* In the above, the 'loop1' relays are inactive, thus feeding IN1 to the
* mixer (if 'add' is active) and feeding the mixer output to OUT1. The
* 'loop2' relays are active, short-cutting the TSE-850 from channel 2.
* IN1, IN2, OUT1 and OUT2 are TSE-850 connectors and DAC is the PCB name
* of the (filtered) output from the PCM5142 codec.
*/
#include <linux/clk.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/regulator/consumer.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include "atmel_ssc_dai.h"
struct tse850_priv {
int ssc_id;
struct gpio_desc *add;
struct gpio_desc *loop1;
struct gpio_desc *loop2;
struct regulator *ana;
int add_cache;
int loop1_cache;
int loop2_cache;
};
static int tse850_get_mux1(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
ucontrol->value.enumerated.item[0] = tse850->loop1_cache;
return 0;
}
static int tse850_put_mux1(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
unsigned int val = ucontrol->value.enumerated.item[0];
if (val >= e->items)
return -EINVAL;
gpiod_set_value_cansleep(tse850->loop1, val);
tse850->loop1_cache = val;
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
}
static int tse850_get_mux2(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
ucontrol->value.enumerated.item[0] = tse850->loop2_cache;
return 0;
}
static int tse850_put_mux2(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
unsigned int val = ucontrol->value.enumerated.item[0];
if (val >= e->items)
return -EINVAL;
gpiod_set_value_cansleep(tse850->loop2, val);
tse850->loop2_cache = val;
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
}
int tse850_get_mix(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
ucontrol->value.enumerated.item[0] = tse850->add_cache;
return 0;
}
int tse850_put_mix(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
int connect = !!ucontrol->value.integer.value[0];
if (tse850->add_cache == connect)
return 0;
/*
* Hmmm, this gpiod_set_value_cansleep call should probably happen
* inside snd_soc_dapm_mixer_update_power in the loop.
*/
gpiod_set_value_cansleep(tse850->add, connect);
tse850->add_cache = connect;
snd_soc_dapm_mixer_update_power(dapm, kctrl, connect, NULL);
return 1;
}
int tse850_get_ana(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
int ret;
ret = regulator_get_voltage(tse850->ana);
if (ret < 0)
return ret;
/*
* Map regulator output values like so:
* -11.5V to "Low" (enum 0)
* 11.5V-12.5V to "12V" (enum 1)
* 12.5V-13.5V to "13V" (enum 2)
* ...
* 18.5V-19.5V to "19V" (enum 8)
* 19.5V- to "20V" (enum 9)
*/
if (ret < 11000000)
ret = 11000000;
else if (ret > 20000000)
ret = 20000000;
ret -= 11000000;
ret = (ret + 500000) / 1000000;
ucontrol->value.enumerated.item[0] = ret;
return 0;
}
int tse850_put_ana(struct snd_kcontrol *kctrl,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_dapm_context *dapm = snd_soc_dapm_kcontrol_dapm(kctrl);
struct snd_soc_card *card = dapm->card;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
struct soc_enum *e = (struct soc_enum *)kctrl->private_value;
unsigned int uV = ucontrol->value.enumerated.item[0];
int ret;
if (uV >= e->items)
return -EINVAL;
/*
* Map enum zero (Low) to 2 volts on the regulator, do this since
* the ana regulator is supplied by the system 12V voltage and
* requesting anything below the system voltage causes the system
* voltage to be passed through the regulator. Also, the ana
* regulator induces noise when requesting voltages near the
* system voltage. So, by mapping Low to 2V, that noise is
* eliminated when all that is needed is 12V (the system voltage).
*/
if (uV)
uV = 11000000 + (1000000 * uV);
else
uV = 2000000;
ret = regulator_set_voltage(tse850->ana, uV, uV);
if (ret < 0)
return ret;
return snd_soc_dapm_put_enum_double(kctrl, ucontrol);
}
static const char * const mux_text[] = { "Mixer", "Loop" };
static const struct soc_enum mux_enum =
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, 2, mux_text);
static const struct snd_kcontrol_new mux1 =
SOC_DAPM_ENUM_EXT("MUX1", mux_enum, tse850_get_mux1, tse850_put_mux1);
static const struct snd_kcontrol_new mux2 =
SOC_DAPM_ENUM_EXT("MUX2", mux_enum, tse850_get_mux2, tse850_put_mux2);
#define TSE850_DAPM_SINGLE_EXT(xname, reg, shift, max, invert, xget, xput) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = snd_soc_info_volsw, \
.get = xget, \
.put = xput, \
.private_value = SOC_SINGLE_VALUE(reg, shift, max, invert, 0) }
static const struct snd_kcontrol_new mix[] = {
TSE850_DAPM_SINGLE_EXT("IN Switch", SND_SOC_NOPM, 0, 1, 0,
tse850_get_mix, tse850_put_mix),
};
static const char * const ana_text[] = {
"Low", "12V", "13V", "14V", "15V", "16V", "17V", "18V", "19V", "20V"
};
static const struct soc_enum ana_enum =
SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, 9, ana_text);
static const struct snd_kcontrol_new out =
SOC_DAPM_ENUM_EXT("ANA", ana_enum, tse850_get_ana, tse850_put_ana);
static const struct snd_soc_dapm_widget tse850_dapm_widgets[] = {
SND_SOC_DAPM_LINE("OUT1", NULL),
SND_SOC_DAPM_LINE("OUT2", NULL),
SND_SOC_DAPM_LINE("IN1", NULL),
SND_SOC_DAPM_LINE("IN2", NULL),
SND_SOC_DAPM_INPUT("DAC"),
SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
SOC_MIXER_ARRAY("MIX", SND_SOC_NOPM, 0, 0, mix),
SND_SOC_DAPM_MUX("MUX1", SND_SOC_NOPM, 0, 0, &mux1),
SND_SOC_DAPM_MUX("MUX2", SND_SOC_NOPM, 0, 0, &mux2),
SND_SOC_DAPM_OUT_DRV("OUT", SND_SOC_NOPM, 0, 0, &out, 1),
};
/*
* These connections are not entirely correct, since both IN1 and IN2
* are always fed to MIX (if the "IN switch" is set so), i.e. without
* regard to the loop1 and loop2 relays that according to this only
* control MUX1 and MUX2 but in fact also control how the input signals
* are routed.
* But, 1) I don't know how to do it right, and 2) it doesn't seem to
* matter in practice since nothing is powered in those sections anyway.
*/
static const struct snd_soc_dapm_route tse850_intercon[] = {
{ "OUT1", NULL, "MUX1" },
{ "OUT2", NULL, "MUX2" },
{ "MUX1", "Loop", "IN1" },
{ "MUX1", "Mixer", "OUT" },
{ "MUX2", "Loop", "IN2" },
{ "MUX2", "Mixer", "OUT" },
{ "OUT", NULL, "MIX" },
{ "MIX", NULL, "DAC" },
{ "MIX", "IN Switch", "IN1" },
{ "MIX", "IN Switch", "IN2" },
/* connect board input to the codec left channel output pin */
{ "DAC", NULL, "OUTL" },
};
static struct snd_soc_dai_link tse850_dailink = {
.name = "TSE-850",
.stream_name = "TSE-850-PCM",
.codec_dai_name = "pcm512x-hifi",
.dai_fmt = SND_SOC_DAIFMT_I2S
| SND_SOC_DAIFMT_NB_NF
| SND_SOC_DAIFMT_CBM_CFS,
};
static struct snd_soc_card tse850_card = {
.name = "TSE-850-ASoC",
.owner = THIS_MODULE,
.dai_link = &tse850_dailink,
.num_links = 1,
.dapm_widgets = tse850_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(tse850_dapm_widgets),
.dapm_routes = tse850_intercon,
.num_dapm_routes = ARRAY_SIZE(tse850_intercon),
.fully_routed = true,
};
static int tse850_dt_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct device_node *codec_np, *cpu_np;
struct snd_soc_card *card = &tse850_card;
struct snd_soc_dai_link *dailink = &tse850_dailink;
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
if (!np) {
dev_err(&pdev->dev, "only device tree supported\n");
return -EINVAL;
}
cpu_np = of_parse_phandle(np, "axentia,ssc-controller", 0);
if (!cpu_np) {
dev_err(&pdev->dev, "failed to get dai and pcm info\n");
return -EINVAL;
}
dailink->cpu_of_node = cpu_np;
dailink->platform_of_node = cpu_np;
tse850->ssc_id = of_alias_get_id(cpu_np, "ssc");
of_node_put(cpu_np);
codec_np = of_parse_phandle(np, "axentia,audio-codec", 0);
if (!codec_np) {
dev_err(&pdev->dev, "failed to get codec info\n");
return -EINVAL;
}
dailink->codec_of_node = codec_np;
of_node_put(codec_np);
return 0;
}
static int tse850_probe(struct platform_device *pdev)
{
struct snd_soc_card *card = &tse850_card;
struct device *dev = card->dev = &pdev->dev;
struct tse850_priv *tse850;
int ret;
tse850 = devm_kzalloc(dev, sizeof(*tse850), GFP_KERNEL);
if (!tse850)
return -ENOMEM;
snd_soc_card_set_drvdata(card, tse850);
ret = tse850_dt_init(pdev);
if (ret) {
dev_err(dev, "failed to init dt info\n");
return ret;
}
tse850->add = devm_gpiod_get(dev, "axentia,add", GPIOD_OUT_HIGH);
if (IS_ERR(tse850->add)) {
if (PTR_ERR(tse850->add) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'add' gpio\n");
return PTR_ERR(tse850->add);
}
tse850->add_cache = 1;
tse850->loop1 = devm_gpiod_get(dev, "axentia,loop1", GPIOD_OUT_HIGH);
if (IS_ERR(tse850->loop1)) {
if (PTR_ERR(tse850->loop1) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'loop1' gpio\n");
return PTR_ERR(tse850->loop1);
}
tse850->loop1_cache = 1;
tse850->loop2 = devm_gpiod_get(dev, "axentia,loop2", GPIOD_OUT_HIGH);
if (IS_ERR(tse850->loop2)) {
if (PTR_ERR(tse850->loop2) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'loop2' gpio\n");
return PTR_ERR(tse850->loop2);
}
tse850->loop2_cache = 1;
tse850->ana = devm_regulator_get(dev, "axentia,ana");
if (IS_ERR(tse850->ana)) {
if (PTR_ERR(tse850->ana) != -EPROBE_DEFER)
dev_err(dev, "failed to get 'ana' regulator\n");
return PTR_ERR(tse850->ana);
}
ret = regulator_enable(tse850->ana);
if (ret < 0) {
dev_err(dev, "failed to enable the 'ana' regulator\n");
return ret;
}
ret = atmel_ssc_set_audio(tse850->ssc_id);
if (ret != 0) {
dev_err(dev,
"failed to set SSC %d for audio\n", tse850->ssc_id);
goto err_disable_ana;
}
ret = snd_soc_register_card(card);
if (ret) {
dev_err(dev, "snd_soc_register_card failed\n");
goto err_put_audio;
}
return 0;
err_put_audio:
atmel_ssc_put_audio(tse850->ssc_id);
err_disable_ana:
regulator_disable(tse850->ana);
return ret;
}
static int tse850_remove(struct platform_device *pdev)
{
struct snd_soc_card *card = platform_get_drvdata(pdev);
struct tse850_priv *tse850 = snd_soc_card_get_drvdata(card);
snd_soc_unregister_card(card);
atmel_ssc_put_audio(tse850->ssc_id);
regulator_disable(tse850->ana);
return 0;
}
static const struct of_device_id tse850_dt_ids[] = {
{ .compatible = "axentia,tse850-pcm5142", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, tse850_dt_ids);
static struct platform_driver tse850_driver = {
.driver = {
.name = "axentia-tse850-pcm5142",
.of_match_table = of_match_ptr(tse850_dt_ids),
},
.probe = tse850_probe,
.remove = tse850_remove,
};
module_platform_driver(tse850_driver);
/* Module information */
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
MODULE_DESCRIPTION("ALSA SoC driver for TSE-850 with PCM5142 codec");
MODULE_LICENSE("GPL");