clk: meson: g12a: add support for the SPICC SCLK Source clocks

This adds the clocks used for the Amlogic G12A and compatible SoCs SPICC
controller to provide a more complete range of frequencies instead of the
SPICC internal divider over Xtal.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

drivers/clk/meson/g12a.c

@@ -3862,6 +3862,111 @@ static struct clk_regmap g12a_ts = {
 	},
 };
 
+/* SPICC SCLK source clock */
+
+static const struct clk_parent_data spicc_sclk_parent_data[] = {
+	{ .fw_name = "xtal", },
+	{ .hw = &g12a_clk81.hw },
+	{ .hw = &g12a_fclk_div4.hw },
+	{ .hw = &g12a_fclk_div3.hw },
+	{ .hw = &g12a_fclk_div5.hw },
+	{ .hw = &g12a_fclk_div7.hw },
+};
+
+static struct clk_regmap g12a_spicc0_sclk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.mask = 7,
+		.shift = 7,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_sclk_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+	},
+};
+
+static struct clk_regmap g12a_spicc0_sclk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.shift = 0,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc0_sclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc0_sclk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.bit_idx = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc0_sclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc0_sclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk_sel = {
+	.data = &(struct clk_regmap_mux_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.mask = 7,
+		.shift = 23,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk_sel",
+		.ops = &clk_regmap_mux_ops,
+		.parent_data = spicc_sclk_parent_data,
+		.num_parents = ARRAY_SIZE(spicc_sclk_parent_data),
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk_div = {
+	.data = &(struct clk_regmap_div_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.shift = 16,
+		.width = 6,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk_div",
+		.ops = &clk_regmap_divider_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc1_sclk_sel.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
+static struct clk_regmap g12a_spicc1_sclk = {
+	.data = &(struct clk_regmap_gate_data){
+		.offset = HHI_SPICC_CLK_CNTL,
+		.bit_idx = 22,
+	},
+	.hw.init = &(struct clk_init_data){
+		.name = "spicc1_sclk",
+		.ops = &clk_regmap_gate_ops,
+		.parent_hws = (const struct clk_hw *[]) {
+			&g12a_spicc1_sclk_div.hw
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+	},
+};
+
 #define MESON_GATE(_name, _reg, _bit) \
 	MESON_PCLK(_name, _reg, _bit, &g12a_clk81.hw)
 
@@ -4159,6 +4264,12 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
 		[CLKID_VDEC_HEVCF]		= &g12a_vdec_hevcf.hw,
 		[CLKID_TS_DIV]			= &g12a_ts_div.hw,
 		[CLKID_TS]			= &g12a_ts.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4408,6 +4519,12 @@ static struct clk_hw_onecell_data g12b_hw_onecell_data = {
 		[CLKID_CPUB_CLK_AXI]		= &g12b_cpub_clk_axi.hw,
 		[CLKID_CPUB_CLK_TRACE_SEL]	= &g12b_cpub_clk_trace_sel.hw,
 		[CLKID_CPUB_CLK_TRACE]		= &g12b_cpub_clk_trace.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4642,6 +4759,12 @@ static struct clk_hw_onecell_data sm1_hw_onecell_data = {
 		[CLKID_CPU1_CLK]		= &sm1_cpu1_clk.hw,
 		[CLKID_CPU2_CLK]		= &sm1_cpu2_clk.hw,
 		[CLKID_CPU3_CLK]		= &sm1_cpu3_clk.hw,
+		[CLKID_SPICC0_SCLK_SEL]		= &g12a_spicc0_sclk_sel.hw,
+		[CLKID_SPICC0_SCLK_DIV]		= &g12a_spicc0_sclk_div.hw,
+		[CLKID_SPICC0_SCLK]		= &g12a_spicc0_sclk.hw,
+		[CLKID_SPICC1_SCLK_SEL]		= &g12a_spicc1_sclk_sel.hw,
+		[CLKID_SPICC1_SCLK_DIV]		= &g12a_spicc1_sclk_div.hw,
+		[CLKID_SPICC1_SCLK]		= &g12a_spicc1_sclk.hw,
 		[NR_CLKS]			= NULL,
 	},
 	.num = NR_CLKS,
@@ -4877,6 +5000,12 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
 	&sm1_cpu1_clk,
 	&sm1_cpu2_clk,
 	&sm1_cpu3_clk,
+	&g12a_spicc0_sclk_sel,
+	&g12a_spicc0_sclk_div,
+	&g12a_spicc0_sclk,
+	&g12a_spicc1_sclk_sel,
+	&g12a_spicc1_sclk_div,
+	&g12a_spicc1_sclk,
 };
 
 static const struct reg_sequence g12a_init_regs[] = {

drivers/clk/meson/g12a.h

@@ -255,8 +255,12 @@
 #define CLKID_DSU_CLK_DYN1			249
 #define CLKID_DSU_CLK_DYN			250
 #define CLKID_DSU_CLK_FINAL			251
+#define CLKID_SPICC0_SCLK_SEL			256
+#define CLKID_SPICC0_SCLK_DIV			257
+#define CLKID_SPICC1_SCLK_SEL			259
+#define CLKID_SPICC1_SCLK_DIV			260
 
-#define NR_CLKS					256
+#define NR_CLKS					262
 
 /* include the CLKIDs that have been made part of the DT binding */
 #include <dt-bindings/clock/g12a-clkc.h>