mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-11-01 09:13:37 +00:00
ARM: dts: mvebu: Add Ctera C-200 V2 board
Ctera C200 V2 is armada-370 based 2-Bay NAS. Hardware: - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC) - Ram: 1GB (2x Nanya NT5CC512M8DN-D1) - NAND Flash: 256MB (ESMT F59L2G81A-25T) - Lan: 1x GBE (Marvell 88E1318-NNB2) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 3.0 port (Renesas uPD720202) - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit is contained in:
Pawel Dembicki
Gregory CLEMENT
parent
5fc74dbdf8
commit
8cd235b216
2 changed files with 389 additions and 0 deletions
|
|
@ -1416,6 +1416,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
|
|||
zynq-zybo.dtb \
|
||||
zynq-zybo-z7.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_370) += \
|
||||
armada-370-c200-v2.dtb \
|
||||
armada-370-db.dtb \
|
||||
armada-370-dlink-dns327l.dtb \
|
||||
armada-370-mirabox.dtb \
|
||||
|
|
|
|||
388
arch/arm/boot/dts/armada-370-c200-v2.dts
Normal file
388
arch/arm/boot/dts/armada-370-c200-v2.dts
Normal file
|
|
@ -0,0 +1,388 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||
/*
|
||||
* Device Tree file for Ctera C200-V2
|
||||
*
|
||||
* Copyright (C) 2022 Pawel Dembicki <paweldembicki@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "armada-370.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/thermal/thermal.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "Ctera C200 V2";
|
||||
compatible = "ctera,c200-v2", "marvell,armada370", "marvell,armada-370-xp";
|
||||
|
||||
chosen {
|
||||
bootargs = "console=ttyS0,115200";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x40000000>; /* 1024 MB */
|
||||
};
|
||||
|
||||
soc {
|
||||
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
||||
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
|
||||
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
|
||||
};
|
||||
|
||||
thermal-zones {
|
||||
ethphy-thermal {
|
||||
polling-delay = <20000>;
|
||||
polling-delay-passive = <2000>;
|
||||
|
||||
thermal-sensors = <ðphy0>;
|
||||
|
||||
trips {
|
||||
ethphy_alert1: trip1 {
|
||||
temperature = <65000>;
|
||||
hysteresis = <4000>;
|
||||
type = "passive";
|
||||
};
|
||||
|
||||
ethphy_crit: trip2 {
|
||||
temperature = <100000>;
|
||||
hysteresis = <2000>;
|
||||
type = "critical";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
beeper {
|
||||
compatible = "pwm-beeper";
|
||||
pinctrl-0 = <&pmx_beeper>;
|
||||
pinctrl-names = "default";
|
||||
pwms = <&gpio1 31 4000>;
|
||||
};
|
||||
|
||||
gpio-poweroff {
|
||||
compatible = "gpio-poweroff";
|
||||
pinctrl-0 = <&pmx_poweroff>;
|
||||
pinctrl-names = "default";
|
||||
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <&pmx_buttons>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
power {
|
||||
label = "Power Button";
|
||||
linux,code = <KEY_POWER>;
|
||||
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb1 {
|
||||
label = "USB1 Button";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "USB2 Button";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led-0 {
|
||||
function = LED_FUNCTION_USB;
|
||||
function-enumerator = <2>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
function = LED_FUNCTION_USB;
|
||||
function-enumerator = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
function = LED_FUNCTION_USB;
|
||||
function-enumerator = <1>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
function = LED_FUNCTION_USB;
|
||||
function-enumerator = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-4 {
|
||||
function = LED_FUNCTION_DISK;
|
||||
function-enumerator = <2>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-5 {
|
||||
function = LED_FUNCTION_DISK;
|
||||
function-enumerator = <1>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-6 {
|
||||
function = LED_FUNCTION_DISK;
|
||||
function-enumerator = <2>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-7 {
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
led-8 {
|
||||
function = LED_FUNCTION_DISK_ERR;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-9 {
|
||||
function = LED_FUNCTION_DISK_ERR;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-10 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-11 {
|
||||
function = LED_FUNCTION_DISK;
|
||||
function-enumerator = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
led-12 {
|
||||
function = LED_FUNCTION_STATUS;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&coherencyfab {
|
||||
broken-idle;
|
||||
};
|
||||
|
||||
ð1 {
|
||||
pinctrl-0 = <&ge1_rgmii_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
phy-handle = <ðphy0>;
|
||||
phy-connection-type = "rgmii-id";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
|
||||
hwmon@2a {
|
||||
compatible = "nuvoton,nct7802";
|
||||
reg = <0x2a>;
|
||||
};
|
||||
|
||||
rtc@30 {
|
||||
compatible = "sii,s35390a";
|
||||
reg = <0x30>;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */
|
||||
reg = <0>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "uboot";
|
||||
reg = <0x0000000 0x200000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "certificate";
|
||||
reg = <0x0200000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@300000 {
|
||||
label = "preset_cfg";
|
||||
reg = <0x0300000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@400000 {
|
||||
label = "dev_params";
|
||||
reg = <0x0400000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
partition@500000 {
|
||||
label = "active_bank";
|
||||
reg = <0x0500000 0x0100000>;
|
||||
};
|
||||
|
||||
partition@600000 {
|
||||
label = "magic";
|
||||
reg = <0x0600000 0x0100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@700000 {
|
||||
label = "bank1";
|
||||
reg = <0x0700000 0x2800000>;
|
||||
};
|
||||
|
||||
partition@2f00000 {
|
||||
label = "bank2";
|
||||
reg = <0x2f00000 0x2800000>;
|
||||
};
|
||||
|
||||
/* 0x5700000-0x5a00000 undefined in vendor firmware */
|
||||
|
||||
partition@5a00000 {
|
||||
label = "reserved";
|
||||
reg = <0x5a00000 0x2000000>;
|
||||
};
|
||||
|
||||
partition@7a00000 {
|
||||
label = "rootfs";
|
||||
reg = <0x7a00000 0x8600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pciec {
|
||||
status = "okay";
|
||||
|
||||
pcie@1,0 { /* Renesas uPD720202 USB 3.0 controller */
|
||||
pinctrl-0 = <&pmx_pcie>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
reset-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmx_poweroff: pmx-poweroff {
|
||||
marvell,pins = "mpp7";
|
||||
marvell,function = "gpo";
|
||||
};
|
||||
|
||||
pmx_power_cpu: pmx-power-cpu {
|
||||
marvell,pins = "mpp4";
|
||||
marvell,function = "vdd";
|
||||
};
|
||||
|
||||
pmx_buttons: pmx-buttons {
|
||||
marvell,pins = "mpp6", "mpp10", "mpp14", "mpp32";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_leds1: pmx-leds1 {
|
||||
marvell,pins = "mpp47";
|
||||
marvell,function = "gpo";
|
||||
};
|
||||
|
||||
pmx_leds2: pmx-leds2 {
|
||||
marvell,pins = "mpp12", "mpp13", "mpp15", "mpp16", "mpp50", "mpp51",
|
||||
"mpp52", "mpp53", "mpp55", "mpp56", "mpp57", "mpp58";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_pcie: pmx-pcie {
|
||||
marvell,pins = "mpp59";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
|
||||
pmx_beeper: pmx-beeper {
|
||||
marvell,pins = "mpp63";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&pmsu {
|
||||
pinctrl-0 = <&pmx_power_cpu>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&rtc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&sata {
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
hdd0_temp: sata-port@0 {
|
||||
reg = <0>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
|
||||
hdd1_temp: sata-port@1 {
|
||||
reg = <1>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue