mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-08-05 16:54:27 +00:00
arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
This dts adds support for BQ Aquaris X5 Plus (Longcheer L9360) released in 2016. Add a device tree with initial support for: - GPIO keys - NFC - SDHCI - Status LED - Touchscreen Signed-off-by: André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20250615-bqx5plus-v2-4-72b45c84237d@apitzsch.eu Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
André Apitzsch
Bjorn Andersson
parent
cf3dcd80db
commit
79b896e7da
2 changed files with 491 additions and 0 deletions
|
|
@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8976-longcheer-l9360.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb
|
||||
|
|
|
|||
490
arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
Normal file
490
arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
Normal file
|
|
@ -0,0 +1,490 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2025, André Apitzsch <git@apitzsch.eu>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
#include "msm8976.dtsi"
|
||||
#include "pm8004.dtsi"
|
||||
#include "pm8950.dtsi"
|
||||
|
||||
/ {
|
||||
model = "BQ Aquaris X5 Plus (Longcheer L9360)";
|
||||
compatible = "longcheer,l9360", "qcom,msm8976";
|
||||
chassis-type = "handset";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
|
||||
mmc1 = &sdhc_2; /* SDC2 SD card slot */
|
||||
};
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
framebuffer0: framebuffer@83200000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0x0 0x83200000 0x0 (1080 * 1920 * 3)>;
|
||||
width = <1080>;
|
||||
height = <1920>;
|
||||
stride = <(1080 * 3)>;
|
||||
format = "r8g8b8";
|
||||
|
||||
power-domains = <&gcc MDSS_GDSC>;
|
||||
|
||||
clocks = <&gcc GCC_MDSS_AHB_CLK>,
|
||||
<&gcc GCC_MDSS_AXI_CLK>,
|
||||
<&gcc GCC_MDSS_VSYNC_CLK>,
|
||||
<&gcc GCC_MDSS_MDP_CLK>,
|
||||
<&gcc GCC_MDSS_BYTE0_CLK>,
|
||||
<&gcc GCC_MDSS_PCLK0_CLK>,
|
||||
<&gcc GCC_MDSS_ESC0_CLK>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&hall_sensor_default>, <&volume_up_default>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
event-hall-sensor {
|
||||
label = "Hall Effect Sensor";
|
||||
gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
linux,can-disable;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
key-volume-up {
|
||||
label = "Volume Up";
|
||||
gpios = <&tlmm 113 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
gpios = <&tlmm 101 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_KBD_BACKLIGHT;
|
||||
|
||||
pinctrl-0 = <&button_backlight_default>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
reg_ts_vdd: regulator-vdd-ts {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "regulator-vdd-ts";
|
||||
|
||||
gpio = <&tlmm 33 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
framebuffer@83000000 {
|
||||
reg = <0x0 0x83000000 0x0 0x2800000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: regulator-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph-pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
led-controller@30 {
|
||||
compatible = "kinetic,ktd2026";
|
||||
reg = <0x30>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
multi-led {
|
||||
color = <LED_COLOR_ID_RGB>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
led@0 {
|
||||
reg = <0>;
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
};
|
||||
|
||||
led@1 {
|
||||
reg = <1>;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
};
|
||||
|
||||
led@2 {
|
||||
reg = <2>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c4 {
|
||||
status = "okay";
|
||||
|
||||
nfc@28 {
|
||||
compatible = "nxp,pn547", "nxp,nxp-nci-i2c";
|
||||
reg = <0x28>;
|
||||
|
||||
interrupts-extended = <&tlmm 140 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
enable-gpios = <&tlmm 122 GPIO_ACTIVE_HIGH>;
|
||||
firmware-gpios = <&tlmm 109 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-0 = <&nfc_default>;
|
||||
pinctrl-1 = <&nfc_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
};
|
||||
};
|
||||
|
||||
&blsp2_i2c2 {
|
||||
status = "okay";
|
||||
|
||||
touchscreen@20 {
|
||||
reg = <0x20>;
|
||||
compatible = "syna,rmi4-i2c";
|
||||
|
||||
interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
pinctrl-0 = <&ts_int_default>, <&ts_reset_default>;
|
||||
pinctrl-1 = <&ts_int_sleep>, <&ts_reset_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
vdd-supply = <&pm8950_l6>;
|
||||
vio-supply = <®_ts_vdd>;
|
||||
|
||||
reset-gpios = <&tlmm 64 GPIO_ACTIVE_LOW>;
|
||||
|
||||
syna,reset-delay-ms = <200>;
|
||||
syna,startup-delay-ms = <200>;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
rmi4-f01@1 {
|
||||
reg = <0x1>;
|
||||
syna,nosleep-mode = <1>;
|
||||
};
|
||||
|
||||
rmi4-f12@12 {
|
||||
reg = <0x12>;
|
||||
syna,sensor-type = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp2_uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
vdd_gfx-supply = <&pm8004_s5>;
|
||||
};
|
||||
|
||||
&pm8004_spmi_regulators {
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
|
||||
/* Cluster 1 supply */
|
||||
pm8004_s2: s2 {
|
||||
/* regulator-min-microvolt = <500000>; */
|
||||
/* Set .95V to prevent unstabilities until CPR for this SoC is done */
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1165000>;
|
||||
regulator-name = "vdd_apc1";
|
||||
/* Set always on until the CPU PLL is done */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
pm8004_s5: s5 {
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1165000>;
|
||||
regulator-enable-ramp-delay = <500>;
|
||||
regulator-name = "vdd_gfx";
|
||||
/* Hack this on until the gpu driver is ready for it */
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8950_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8950_spmi_regulators {
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
|
||||
/* Cluster 0 supply */
|
||||
pm8950_spmi_s5: s5 {
|
||||
/* Set .95V to prevent unstabilities until CPR for this SoC is done */
|
||||
/* regulator-min-microvolt = <500000>; */
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1165000>;
|
||||
regulator-name = "vdd_apc0";
|
||||
/* Set always on until the CPU PLL is done */
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
pm8950_regulators: regulators {
|
||||
compatible = "qcom,rpm-pm8950-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s6-supply = <&vph_pwr>;
|
||||
vdd_l1_l19-supply = <&pm8950_s3>;
|
||||
vdd_l2_l23-supply = <&pm8950_s3>;
|
||||
vdd_l3-supply = <&pm8950_s3>;
|
||||
vdd_l5_l6_l7_l16-supply = <&pm8950_s4>;
|
||||
vdd_l8_l11_l12_l17_l22-supply = <&vph_pwr>;
|
||||
|
||||
pm8950_s1: s1 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1162500>;
|
||||
};
|
||||
|
||||
pm8950_s3: s3 {
|
||||
regulator-min-microvolt = <1325000>;
|
||||
regulator-max-microvolt = <1325000>;
|
||||
};
|
||||
|
||||
pm8950_s4: s4 {
|
||||
regulator-min-microvolt = <2050000>;
|
||||
regulator-max-microvolt = <2050000>;
|
||||
};
|
||||
|
||||
pm8950_l1: l1 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8950_l2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
pm8950_l3: l3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
pm8950_l5: l5 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l6: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l7: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l8: l8 {
|
||||
regulator-min-microvolt = <2900000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
};
|
||||
|
||||
pm8950_l9: l9 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8950_l10: l10 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
pm8950_l11: l11 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8950_l12: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
pm8950_l13: l13 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
};
|
||||
|
||||
pm8950_l14: l14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8950_l15: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
pm8950_l16: l16 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
pm8950_l17: l17 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
pm8950_l19: l19 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
};
|
||||
|
||||
pm8950_l22: l22 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
||||
pm8950_l23: l23 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_1 {
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
vmmc-supply = <&pm8950_l8>;
|
||||
vqmmc-supply = <&pm8950_l5>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&tlmm 100 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&pm8950_l11>;
|
||||
vqmmc-supply = <&pm8950_l12>;
|
||||
|
||||
pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
|
||||
pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>;
|
||||
|
||||
button_backlight_default: button-backlight-default-state {
|
||||
pins = "gpio101";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
hall_sensor_default: hall-sensor-default-state {
|
||||
pins = "gpio107";
|
||||
function = "gpio";
|
||||
drive-strength = <6>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
nfc_default: nfc-default-state {
|
||||
pins = "gpio122", "gpio140";
|
||||
function = "gpio";
|
||||
drive-strength = <6>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
nfc_sleep: nfc-sleep-state {
|
||||
int-pins {
|
||||
pins = "gpio140";
|
||||
function = "gpio";
|
||||
drive-strength = <6>;
|
||||
bias-pull-up;
|
||||
};
|
||||
ven-pins {
|
||||
pins = "gpio122";
|
||||
function = "gpio";
|
||||
drive-strength = <6>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
sdc2_cd_default: sdc2-cd-default-state {
|
||||
pins = "gpio100";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
sdc2_cd_sleep: sdc2-cd-sleep-state {
|
||||
pins = "gpio100";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
ts_int_default: ts-int-state {
|
||||
pins = "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
ts_int_sleep: ts-int-state {
|
||||
pins = "gpio65";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
ts_reset_default: ts-reset-state {
|
||||
pins = "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
ts_reset_sleep: ts-sleep-state {
|
||||
pins = "gpio64";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
volume_up_default: volume-up-default-state {
|
||||
pins = "gpio113";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
&xo_board {
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue