mirror of
				git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
				synced 2025-10-31 08:44:41 +00:00 
			
		
		
		
	arm64: dts: imx8mm: add imx8mm-venice-gw72xx-0x-rpidsi overlay for display
Add support for the following Raspberry Pi displays: - DFROBOT DRF0678 7in 800x480 TFT DSI capacitive touch - DFROBOT DRF0550 5in 800x480 TFT DSI capacitive touch Both have the following hardware: - FocalTech FT5406 10pt touch controller (with no interrupt) - Powertip PH800480T013-IDF02 compatible panel - Toshiba TC358762 compatible DSI to DBI bridge - ATTINY based regulator used for backlight controller and panel enable Support is added via a device-tree overlay. The touch controller is not yet supported as polling mode is needed. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
		
							parent
							
								
									b7df89f1c9
								
							
						
					
					
						commit
						6b4da1354f
					
				
					 2 changed files with 92 additions and 0 deletions
				
			
		|  | @ -143,6 +143,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb | |||
| dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb | ||||
| 
 | ||||
| imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo | ||||
| imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo | ||||
| imx8mm-venice-gw72xx-0x-rs232-rts-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs232-rts.dtbo | ||||
| imx8mm-venice-gw72xx-0x-rs422-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs422.dtbo | ||||
| imx8mm-venice-gw72xx-0x-rs485-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rs485.dtbo | ||||
|  | @ -153,6 +154,7 @@ imx8mm-venice-gw73xx-0x-rs422-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice- | |||
| imx8mm-venice-gw73xx-0x-rs485-dtbs	:= imx8mm-venice-gw73xx-0x.dtb imx8mm-venice-gw73xx-0x-rs485.dtbo | ||||
| 
 | ||||
| dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-imx219.dtb | ||||
| dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rpidsi.dtb | ||||
| dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs232-rts.dtb | ||||
| dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs422.dtb | ||||
| dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x-rs485.dtb | ||||
|  |  | |||
|  | @ -0,0 +1,90 @@ | |||
| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) | ||||
| /* | ||||
|  * Copyright 2023 Gateworks Corporation | ||||
|  */ | ||||
| 
 | ||||
| #include <dt-bindings/gpio/gpio.h> | ||||
| 
 | ||||
| #include "imx8mm-pinfunc.h" | ||||
| 
 | ||||
| /dts-v1/; | ||||
| /plugin/; | ||||
| 
 | ||||
| &{/} { | ||||
| 	compatible = "gw,imx8mm-gw73xx-0x", "fsl,imx8mm"; | ||||
| 
 | ||||
| 	panel { | ||||
| 		compatible = "powertip,ph800480t013-idf02"; | ||||
| 		power-supply = <&attiny>; | ||||
| 		backlight = <&attiny>; | ||||
| 
 | ||||
| 		port { | ||||
| 			panel_in: endpoint { | ||||
| 				remote-endpoint = <&bridge_out>; | ||||
| 			}; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
| 
 | ||||
| &i2c3 { | ||||
| 	#address-cells = <1>; | ||||
| 	#size-cells = <0>; | ||||
| 
 | ||||
| 	attiny: regulator@45 { | ||||
| 		compatible = "raspberrypi,7inch-touchscreen-panel-regulator"; | ||||
| 		reg = <0x45>; | ||||
| 	}; | ||||
| }; | ||||
| 
 | ||||
| &lcdif { | ||||
| 	status = "okay"; | ||||
| }; | ||||
| 
 | ||||
| &mipi_dsi { | ||||
| 	samsung,burst-clock-frequency = <891000000>; | ||||
| 	samsung,esc-clock-frequency = <54000000>; | ||||
| 	samsung,pll-clock-frequency = <27000000>; | ||||
| 	#address-cells = <1>; | ||||
| 	#size-cells = <0>; | ||||
| 	status = "okay"; | ||||
| 
 | ||||
| 	bridge@0 { | ||||
| 		compatible = "toshiba,tc358762"; | ||||
| 		reg = <0>; | ||||
| 		vddc-supply = <&attiny>; | ||||
| 
 | ||||
| 		ports { | ||||
| 			#address-cells = <1>; | ||||
| 			#size-cells = <0>; | ||||
| 
 | ||||
| 			port@0 { | ||||
| 				reg = <0>; | ||||
| 
 | ||||
| 				bridge_in: endpoint { | ||||
| 					remote-endpoint = <&dsi_out>; | ||||
| 				}; | ||||
| 			}; | ||||
| 
 | ||||
| 			port@1 { | ||||
| 				reg = <1>; | ||||
| 
 | ||||
| 				bridge_out: endpoint { | ||||
| 					remote-endpoint = <&panel_in>; | ||||
| 				}; | ||||
| 			}; | ||||
| 		}; | ||||
| 	}; | ||||
| 
 | ||||
| 	ports { | ||||
| 		#address-cells = <1>; | ||||
| 		#size-cells = <0>; | ||||
| 
 | ||||
| 		port@1 { | ||||
| 			reg = <1>; | ||||
| 
 | ||||
| 			dsi_out: endpoint { | ||||
| 				remote-endpoint = <&bridge_in>; | ||||
| 			}; | ||||
| 		}; | ||||
| 	}; | ||||
| }; | ||||
		Loading…
	
	Add table
		
		Reference in a new issue
	
	 Tim Harvey
						Tim Harvey