pinctrl: Remove dev_err() usage after platform_get_irq()

We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-34-swboyd@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

drivers/pinctrl/pinctrl-amd.c

@@ -861,10 +861,8 @@ static int amd_gpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	irq_base = platform_get_irq(pdev, 0);
-	if (irq_base < 0) {
+	if (irq_base < 0)
-		dev_err(&pdev->dev, "Failed to get gpio IRQ: %d\n", irq_base);
 		return irq_base;
-	}
 
 #ifdef CONFIG_PM_SLEEP
 	gpio_dev->saved_regs = devm_kcalloc(&pdev->dev, amd_pinctrl_desc.npins,

drivers/pinctrl/pinctrl-oxnas.c

@@ -1225,10 +1225,8 @@ static int oxnas_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(bank->reg_base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	if (irq < 0)
-		dev_err(&pdev->dev, "irq get failed\n");
 		return irq;
-	}
 
 	bank->id = id;
 	bank->gpio_chip.parent = &pdev->dev;

drivers/pinctrl/pinctrl-pic32.c

@@ -2222,10 +2222,8 @@ static int pic32_gpio_probe(struct platform_device *pdev)
 		return PTR_ERR(bank->reg_base);
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
+	if (irq < 0)
-		dev_err(&pdev->dev, "irq get failed\n");
 		return irq;
-	}
 
 	bank->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(bank->clk)) {

drivers/pinctrl/pinctrl-stmfx.c

@@ -608,10 +608,8 @@ static int stmfx_pinctrl_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq <= 0) {
+	if (irq <= 0)
-		dev_err(pctl->dev, "failed to get irq\n");
 		return -ENXIO;
-	}
 
 	mutex_init(&pctl->lock);
 

drivers/pinctrl/qcom/pinctrl-msm.c

@@ -1158,10 +1158,8 @@ int msm_pinctrl_probe(struct platform_device *pdev,
 	msm_pinctrl_setup_pm_reset(pctrl);
 
 	pctrl->irq = platform_get_irq(pdev, 0);
-	if (pctrl->irq < 0) {
+	if (pctrl->irq < 0)
-		dev_err(&pdev->dev, "No interrupt defined for msmgpio\n");
 		return pctrl->irq;
-	}
 
 	pctrl->desc.owner = THIS_MODULE;
 	pctrl->desc.pctlops = &msm_pinctrl_ops;

drivers/pinctrl/qcom/pinctrl-ssbi-mpp.c

@@ -791,11 +791,8 @@ static int pm8xxx_mpp_probe(struct platform_device *pdev)
 	for (i = 0; i < pctrl->desc.npins; i++) {
 		pin_data[i].reg = SSBI_REG_ADDR_MPP(i);
 		pin_data[i].irq = platform_get_irq(pdev, i);
-		if (pin_data[i].irq < 0) {
+		if (pin_data[i].irq < 0)
-			dev_err(&pdev->dev,
-				"missing interrupts for pin %d\n", i);
 			return pin_data[i].irq;
-		}
 
 		ret = pm8xxx_pin_populate(pctrl, &pin_data[i]);
 		if (ret)