public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-18 22:14:16 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

arm64: dts: qcom: sm6125-seine: Configure additional trinket thermistors

Browse source 
In addition to PMIC-specific (pm6125) thermistors downstream extends
this set with the rf-pa0/rf-pa1, quiet, camera-flash and UFS/eMMC
thermistors in sm6125 (trinket) board and seine-specific DT files.  All
thermistors report sensible temperature readings in userspace.

The sensors are also added to their respective Thermal Monitor node,
with thermal zones to match where applicable: emmc-ufs and camera-flash
are not available on the TM5 block, hence cannot be configured with a
tripping point and will not have a thermal zone.

Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20220926190148.283805-6-marijn.suijten@somainline.org
This commit is contained in:
Marijn Suijten 2022-09-26 21:01:48 +02:00 • committed by Bjorn Andersson
parent 7401035f2e
commit 4ba146dd88
1 changed files with 151 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

151
arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
View file

@ -9,6 +9,7 @@
#include "pm6125.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/gpio-keys.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
/* required for bootloader to select correct board */
@ -80,12 +81,162 @@
no-map;
};
};
thermal-zones {
rf-pa0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6125_adc_tm 0>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
quiet-thermal {
polling-delay-passive = <0>;
polling-delay = <5000>;
thermal-sensors = <&pm6125_adc_tm 1>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
xo-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6125_adc_tm 2>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
rf-pa1-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
thermal-sensors = <&pm6125_adc_tm 3>;
trips {
active-config0 {
temperature = <125000>;
hysteresis = <1000>;
type = "critical";
};
};
};
};
};
&hsusb_phy1 {
status = "okay";
};
&pm6125_adc {
pinctrl-names = "default";
pinctrl-0 = <&camera_flash_therm &emmc_ufs_therm &rf_pa1_therm>;
rf-pa0-therm@4d {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
quiet-therm@4e {
reg = <ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
camera-flash-therm@52 {
reg = <ADC5_GPIO1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
emmc-ufs-therm@54 {
reg = <ADC5_GPIO3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
rf-pa1-therm@55 {
reg = <ADC5_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
};
&pm6125_adc_tm {
status = "okay";
rf-pa0-therm@0 {
reg = <0>;
io-channels = <&pm6125_adc ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
quiet-therm@1 {
reg = <1>;
io-channels = <&pm6125_adc ADC5_AMUX_THM2_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
xo-therm@2 {
reg = <2>;
io-channels = <&pm6125_adc ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
rf-pa1-therm@3 {
reg = <3>;
io-channels = <&pm6125_adc ADC5_GPIO4_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time-us = <200>;
};
};
&pm6125_gpio {
camera_flash_therm: camera-flash-therm-state {
pins = "gpio3";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
emmc_ufs_therm: emmc-ufs-therm-state {
pins = "gpio6";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
rf_pa1_therm: rf-pa1-therm-state {
pins = "gpio7";
function = PMIC_GPIO_FUNC_NORMAL;
bias-high-impedance;
};
};
&pon_pwrkey {
status = "okay";
};