public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-18 22:14:16 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

arm64: dts: imx93-qsb/evk: add usdhc3 and lpuart5

Browse source 
Add usdhc3 and lpuart5 for imx93-9x9-qsb, imx93-11x11-evk and
imx93-14x14-evk, which connect to onboard wifi/bt module.

Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
Frank Li 2025-06-09 12:52:34 -04:00 • committed by Shawn Guo
parent 3118394684
commit 3ee1857868
3 changed files with 294 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

103
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
View file

@ -95,6 +95,15 @@
gpio = <&adp5585 6 GPIO_ACTIVE_LOW>;
};
reg_m2_pwr: regulator-m2-pwr {
compatible = "regulator-fixed";
regulator-name = "M.2-power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@ -107,6 +116,28 @@
enable-active-high;
};
reg_usdhc3_vmmc: regulator-usdhc3 {
compatible = "regulator-fixed";
regulator-name = "WLAN_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&reg_m2_pwr>;
gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
/*
* IW612 wifi chip needs more delay than other wifi chips to complete
* the host interface initialization after power up, otherwise the
* internal state of IW612 may be unstable, resulting in the failure of
* the SDIO3.0 switch voltage.
*/
startup-delay-us = <20000>;
enable-active-high;
};
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
};
backlight_lvds: backlight-lvds {
compatible = "pwm-backlight";
pwms = <&adp5585 0 100000 0>;
@ -492,6 +523,10 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
status = "okay";
bluetooth {
compatible = "nxp,88w8987-bt";
};
};
&micfil {
@ -593,6 +628,21 @@
no-mmc;
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
mmc-pwrseq = <&usdhc3_pwrseq>;
vmmc-supply = <&reg_usdhc3_vmmc>;
bus-width = <4>;
keep-power-in-suspend;
non-removable;
wakeup-source;
status = "okay";
};
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@ -934,6 +984,59 @@
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
>;
};
pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
>;
};
pinctrl_usdhc3_wlan: usdhc3wlangrp {
fsl,pins = <
MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e

99
arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
View file

@ -99,6 +99,15 @@
enable-active-high;
};
reg_m2_pwr: regulator-m2-pwr {
compatible = "regulator-fixed";
regulator-name = "M.2-power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: regulator-usdhc2 {
compatible = "regulator-fixed";
pinctrl-names = "default";
@ -111,6 +120,23 @@
off-on-delay-us = <12000>;
};
reg_usdhc3_vmmc: regulator-usdhc3 {
compatible = "regulator-fixed";
regulator-name = "WLAN_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&reg_m2_pwr>;
gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
/*
* IW612 wifi chip needs more delay than other wifi chips to complete
* the host interface initialization after power up, otherwise the
* internal state of IW612 may be unstable, resulting in the failure of
* the SDIO3.0 switch voltage.
*/
startup-delay-us = <20000>;
enable-active-high;
};
reg_vdd_12v: regulator-vdd-12v {
compatible = "regulator-fixed";
regulator-name = "reg_vdd_12v";
@ -126,6 +152,11 @@
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
};
};
&adc1 {
@ -366,6 +397,21 @@
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_wlan>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_wlan>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_wlan>;
pinctrl-3 = <&pinctrl_usdhc3_sleep>, <&pinctrl_usdhc3_wlan>;
mmc-pwrseq = <&usdhc3_pwrseq>;
vmmc-supply = <&reg_usdhc3_vmmc>;
bus-width = <4>;
keep-power-in-suspend;
non-removable;
wakeup-source;
status = "okay";
};
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@ -552,6 +598,59 @@
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
>;
};
pinctrl_usdhc3_sleep: usdhc3grpsleepgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__GPIO3_IO20 0x31e
MX93_PAD_SD3_CMD__GPIO3_IO21 0x31e
MX93_PAD_SD3_DATA0__GPIO3_IO22 0x31e
MX93_PAD_SD3_DATA1__GPIO3_IO23 0x31e
MX93_PAD_SD3_DATA2__GPIO3_IO24 0x31e
MX93_PAD_SD3_DATA3__GPIO3_IO25 0x31e
>;
};
pinctrl_usdhc3_wlan: usdhc3wlangrp {
fsl,pins = <
MX93_PAD_CCM_CLKO1__GPIO3_IO26 0x31e
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e

92
arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
View file

@ -82,6 +82,15 @@
enable-active-high;
};
reg_m2_pwr: regulator-m2-pwr {
compatible = "regulator-fixed";
regulator-name = "M.2-power";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pcal6524 13 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_rpi_3v3: regulator-rpi {
compatible = "regulator-fixed";
regulator-name = "VDD_RPI_3V3";
@ -103,6 +112,23 @@
off-on-delay-us = <12000>;
};
reg_usdhc3_vmmc: regulator-usdhc3 {
compatible = "regulator-fixed";
regulator-name = "WLAN_EN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&reg_m2_pwr>;
gpio = <&pcal6524 20 GPIO_ACTIVE_HIGH>;
/*
* IW612 wifi chip needs more delay than other wifi chips to complete
* the host interface initialization after power up, otherwise the
* internal state of IW612 may be unstable, resulting in the failure of
* the SDIO3.0 switch voltage.
*/
startup-delay-us = <20000>;
enable-active-high;
};
sound-bt-sco {
compatible = "simple-audio-card";
simple-audio-card,name = "bt-sco-audio";
@ -151,6 +177,11 @@
"IN3R", "AMIC",
"IN1R", "AMIC";
};
usdhc3_pwrseq: usdhc3_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pcal6524 12 GPIO_ACTIVE_LOW>;
};
};
&adc1 {
@ -384,6 +415,17 @@
status = "okay";
};
&lpuart5 {
/* BT */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
status = "okay";
bluetooth {
compatible = "nxp,88w8987-bt";
};
};
&micfil {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pdm>;
@ -462,6 +504,20 @@
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
mmc-pwrseq = <&usdhc3_pwrseq>;
vmmc-supply = <&reg_usdhc3_vmmc>;
bus-width = <4>;
keep-power-in-suspend;
non-removable;
wakeup-source;
status = "okay";
};
&wdog3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
@ -654,6 +710,42 @@
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x1582
MX93_PAD_SD3_CMD__USDHC3_CMD 0x40001382
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x40001382
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x40001382
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x40001382
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x40001382
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x158e
MX93_PAD_SD3_CMD__USDHC3_CMD 0x4000138e
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x4000138e
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x4000138e
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x4000138e
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x4000138e
>;
};
/* need to config the SION for data and cmd pad, refer to ERR052021 */
pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
fsl,pins = <
MX93_PAD_SD3_CLK__USDHC3_CLK 0x15fe
MX93_PAD_SD3_CMD__USDHC3_CMD 0x400013fe
MX93_PAD_SD3_DATA0__USDHC3_DATA0 0x400013fe
MX93_PAD_SD3_DATA1__USDHC3_DATA1 0x400013fe
MX93_PAD_SD3_DATA2__USDHC3_DATA2 0x400013fe
MX93_PAD_SD3_DATA3__USDHC3_DATA3 0x400013fe
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX93_PAD_WDOG_ANY__WDOG1_WDOG_ANY 0x31e