ARM SoC fixes for v5.12, part 2

Most of the changes again are devicetree fixes, but there are also five
 trivial build fixes for issues I found when test building with gcc-11 or
 when running 'make W=1', and some OMAP platform specific code fixups.
 
 Broadcom
   - One revert for a Raspberry pi interrupt controller change that
     caused a regression.
 
 TI OMAP:
   - Remove unused duplicate sha2md5_fck clock node that can race with the
     OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks
 
   - Add aliases for omap4/5 mmc to put the slots back into the right
     order again
 
   - Fix typo for bionic voltage controllers that accidentally use mpu
     for all instances instead of mpu, core and iva
 
   - Fix random hangs for droid4 caused by missing fix from TI Android
     kernel tree to do a dummy smc call on cpuidle wakeup path
 
 NXP i.MX:
   - Fix a system failure on imx6qdl-phytec-pfla02 board when booting from
     SD, by adding missing vmmc supply for SD interfaces.
 
   - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2 definition.
 
 Marvell mvebu:
   - Fix storm interrupt on Turris Omnia
 
   - Enable hardware buffer management as it should be
 
 Build fixes for PXA, Freescale, Marvell, OMAP1 an Keystone.
 
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmBs0OgACgkQYKtH/8kJ
 UifdEBAAiD3JebS8a1jsgL+/va/ptOuBZP2l4sCH3P/bczsNKeAn+BvwAy4jNJ4b
 C55ZFnz6tX37CGY7e1Pe7LC8WhVd1LGfCm/gSreKUTkETZd/87PoR1xM4GxbhmBQ
 8HNJOVDBSes6tHgWTAgQ7rHGQQ71JoRYc9FJPOH2JDsk8SaeL8Z+Bjay3O3nlBQw
 RU0zoWv/khkdRvzt4oDTmW6pPDQh5c9twv2ORZM92+tXhSeF2AAY08GdAAmiZL5W
 Lq30YozGSJHPcIYSN+jSWPJNtzmrF3oZVTqDzqTN/aIVoH+8MFZHSmCd3iM1RWkT
 wkanNiqF7CRYAdLmC00YTToJUQxsbOYugfUMWYC04VocVbeEDAhnITFVF1zrJLZ4
 q4E/S5WSZjLPUsiDhSK+d0S2bFVrEyQUaDaFWrC6Aet5wA6pI/8X0Q3ZSMV7jzq+
 NkZYuA2oKoW0vwnH+7432/1g33CpCxKRVr/zBhesjCpB3Ymj0OWfqGeHA2fyjFQq
 fNvUnG6LyXE+NBgIfgZTGbBr1gCT/XHqd0GcYrBy4v0L3x8qJSh1ClA0qlpWr+Zl
 mY5jMC6MrGGuHXEhqIoS38mO0RTyx9i2iDjge2CrAMmRxdVR453Z4VIbDnSwGDAe
 K8lASQKHEyvRzdmJDVhaesHqwU9BDtWULY8Q2+3jKqv3wwf6d0I=
 =YY35
 -----END PGP SIGNATURE-----

Merge tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC fixes from Arnd Bergmann:
 "Most of the changes again are devicetree fixes, but there are also
  five trivial build fixes for issues I found when test building with
  gcc-11 or when running 'make W=1', and some OMAP platform specific
  code fixups.

  Broadcom:
   - One revert for a Raspberry pi interrupt controller change that
     caused a regression.

  TI OMAP:
   - Remove unused duplicate sha2md5_fck clock node that can race with
     the OMAP4_SHA2MD5_CLKCTRL clock node for disable for unused clocks

   - Add aliases for omap4/5 mmc to put the slots back into the right
     order again

   - Fix typo for bionic voltage controllers that accidentally use mpu
     for all instances instead of mpu, core and iva

   - Fix random hangs for droid4 caused by missing fix from TI Android
     kernel tree to do a dummy smc call on cpuidle wakeup path

  NXP i.MX:
   - Fix a system failure on imx6qdl-phytec-pfla02 board when booting
     from SD, by adding missing vmmc supply for SD interfaces.

   - Fix address typo in i.MX8MM/Q IOMUXC_SD1_DATA0_GPIO2_IO2
     definition.

  Marvell mvebu:
   - Fix storm interrupt on Turris Omnia

   - Enable hardware buffer management as it should be

  ... and build fixes for PXA, Freescale, Marvell, OMAP1 and Keystone"

* tag 'arm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: turris-omnia: configure LED[2]/INTn pin as interrupt pin
  ARM: dts: turris-omnia: fix hardware buffer management
  Revert "arm64: dts: marvell: armada-cp110: Switch to per-port SATA interrupts"
  ARM: mvebu: avoid clang -Wtautological-constant warning
  ARM: pxa: mainstone: avoid -Woverride-init warning
  ARM: omap1: fix building with clang IAS
  soc/fsl: qbman: fix conflicting alignment attributes
  ARM: keystone: fix integer overflow warning
  ARM: dts: imx6: pbab01: Set vmmc supply for both SD interfaces
  arm64: dts: imx8mm/q: Fix pad control of SD1_DATA0
  ARM: OMAP4: PM: update ROM return address for OSWR and OFF
  ARM: OMAP4: Fix PMIC voltage domains for bionic
  ARM: dts: Fix moving mmc devices with aliases for omap4 & 5
  ARM: dts: Drop duplicate sha2md5_fck to fix clk_disable race
  Revert "ARM: dts: bcm2711: Add the BSC interrupt controller"

arch/arm/boot/dts/armada-385-turris-omnia.dts

@@ -32,7 +32,8 @@
 		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
 			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
 			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
-			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
 
 		internal-regs {
 
@@ -389,6 +390,7 @@
 	phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		marvell,reg-init = <3 18 0 0x4985>;
 
 		/* irq is connected to &pcawan pin 7 */
 	};

arch/arm/boot/dts/bcm2711.dtsi

@@ -308,14 +308,6 @@
 			#reset-cells = <1>;
 		};
 
-		bsc_intr: interrupt-controller@7ef00040 {
-			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
-			reg = <0x7ef00040 0x30>;
-			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <1>;
-		};
-
 		aon_intr: interrupt-controller@7ef00100 {
 			compatible = "brcm,bcm2711-l2-intc", "brcm,l2-intc";
 			reg = <0x7ef00100 0x30>;
@@ -362,8 +354,6 @@
 			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
 			reg-names = "bsc", "auto-i2c";
 			clock-frequency = <97500>;
-			interrupt-parent = <&bsc_intr>;
-			interrupts = <0>;
 			status = "disabled";
 		};
 
@@ -405,8 +395,6 @@
 			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
 			reg-names = "bsc", "auto-i2c";
 			clock-frequency = <97500>;
-			interrupt-parent = <&bsc_intr>;
-			interrupts = <1>;
 			status = "disabled";
 		};
 	};

arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi

@@ -433,6 +433,7 @@
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd1_reg>;
 	status = "disabled";
 };
 
@@ -442,5 +443,6 @@
 		     &pinctrl_usdhc3_cdwp>;
 	cd-gpios = <&gpio1 27 GPIO_ACTIVE_LOW>;
 	wp-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&vdd_sd0_reg>;
 	status = "disabled";
 };

arch/arm/boot/dts/omap4.dtsi

@@ -22,6 +22,11 @@
 		i2c1 = &i2c2;
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

arch/arm/boot/dts/omap44xx-clocks.dtsi

@@ -770,14 +770,6 @@
 		ti,max-div = <2>;
 	};
 
-	sha2md5_fck: sha2md5_fck@15c8 {
-		#clock-cells = <0>;
-		compatible = "ti,gate-clock";
-		clocks = <&l3_div_ck>;
-		ti,bit-shift = <1>;
-		reg = <0x15c8>;
-	};
-
 	usb_phy_cm_clk32k: usb_phy_cm_clk32k@640 {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";

arch/arm/boot/dts/omap5.dtsi

@@ -25,6 +25,11 @@
 		i2c2 = &i2c3;
 		i2c3 = &i2c4;
 		i2c4 = &i2c5;
+		mmc0 = &mmc1;
+		mmc1 = &mmc2;
+		mmc2 = &mmc3;
+		mmc3 = &mmc4;
+		mmc4 = &mmc5;
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;

arch/arm/mach-keystone/keystone.c

@@ -65,7 +65,7 @@ static void __init keystone_init(void)
 static long long __init keystone_pv_fixup(void)
 {
 	long long offset;
-	phys_addr_t mem_start, mem_end;
+	u64 mem_start, mem_end;
 
 	mem_start = memblock_start_of_DRAM();
 	mem_end = memblock_end_of_DRAM();
@@ -78,7 +78,7 @@ static long long __init keystone_pv_fixup(void)
 	if (mem_start < KEYSTONE_HIGH_PHYS_START ||
 	    mem_end   > KEYSTONE_HIGH_PHYS_END) {
 		pr_crit("Invalid address space for memory (%08llx-%08llx)\n",
-		        (u64)mem_start, (u64)mem_end);
+		        mem_start, mem_end);
 		return 0;
 	}
 

arch/arm/mach-omap1/ams-delta-fiq-handler.S

@@ -15,6 +15,7 @@
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/assembler.h>
+#include <asm/irq.h>
 
 #include "ams-delta-fiq.h"
 #include "board-ams-delta.h"

arch/arm/mach-omap2/omap-secure.c

@@ -9,6 +9,7 @@
  */
 
 #include <linux/arm-smccc.h>
+#include <linux/cpu_pm.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -20,6 +21,7 @@
 
 #include "common.h"
 #include "omap-secure.h"
+#include "soc.h"
 
 static phys_addr_t omap_secure_memblock_base;
 
@@ -213,3 +215,40 @@ void __init omap_secure_init(void)
 {
 	omap_optee_init_check();
 }
+
+/*
+ * Dummy dispatcher call after core OSWR and MPU off. Updates the ROM return
+ * address after MMU has been re-enabled after CPU1 has been woken up again.
+ * Otherwise the ROM code will attempt to use the earlier physical return
+ * address that got set with MMU off when waking up CPU1. Only used on secure
+ * devices.
+ */
+static int cpu_notifier(struct notifier_block *nb, unsigned long cmd, void *v)
+{
+	switch (cmd) {
+	case CPU_CLUSTER_PM_EXIT:
+		omap_secure_dispatcher(OMAP4_PPA_SERVICE_0,
+				       FLAG_START_CRITICAL,
+				       0, 0, 0, 0, 0);
+		break;
+	default:
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block secure_notifier_block = {
+	.notifier_call = cpu_notifier,
+};
+
+static int __init secure_pm_init(void)
+{
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP || !soc_is_omap44xx())
+		return 0;
+
+	cpu_pm_register_notifier(&secure_notifier_block);
+
+	return 0;
+}
+omap_arch_initcall(secure_pm_init);

arch/arm/mach-omap2/omap-secure.h

@@ -50,6 +50,7 @@
 #define OMAP5_DRA7_MON_SET_ACR_INDEX	0x107
 
 /* Secure PPA(Primary Protected Application) APIs */
+#define OMAP4_PPA_SERVICE_0		0x21
 #define OMAP4_PPA_L2_POR_INDEX		0x23
 #define OMAP4_PPA_CPU_ACTRL_SMP_INDEX	0x25
 

arch/arm/mach-omap2/pmic-cpcap.c

@@ -246,10 +246,10 @@ int __init omap4_cpcap_init(void)
 	omap_voltage_register_pmic(voltdm, &omap443x_max8952_mpu);
 
 	if (of_machine_is_compatible("motorola,droid-bionic")) {
-		voltdm = voltdm_lookup("mpu");
+		voltdm = voltdm_lookup("core");
 		omap_voltage_register_pmic(voltdm, &omap_cpcap_core);
 
-		voltdm = voltdm_lookup("mpu");
+		voltdm = voltdm_lookup("iva");
 		omap_voltage_register_pmic(voltdm, &omap_cpcap_iva);
 	} else {
 		voltdm = voltdm_lookup("core");

arch/arm/mach-pxa/mainstone.c

@@ -502,16 +502,20 @@ static inline void mainstone_init_keypad(void) {}
 #endif
 
 static int mst_pcmcia0_irqs[11] = {
-	[0 ... 10] = -1,
+	[0 ... 4] = -1,
 	[5] = MAINSTONE_S0_CD_IRQ,
+	[6 ... 7] = -1,
 	[8] = MAINSTONE_S0_STSCHG_IRQ,
+	[9] = -1,
 	[10] = MAINSTONE_S0_IRQ,
 };
 
 static int mst_pcmcia1_irqs[11] = {
-	[0 ... 10] = -1,
+	[0 ... 4] = -1,
 	[5] = MAINSTONE_S1_CD_IRQ,
+	[6 ... 7] = -1,
 	[8] = MAINSTONE_S1_STSCHG_IRQ,
+	[9] = -1,
 	[10] = MAINSTONE_S1_IRQ,
 };
 

arch/arm64/boot/dts/freescale/imx8mm-pinfunc.h

@@ -124,7 +124,7 @@
 #define MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MM_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MM_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0

arch/arm64/boot/dts/freescale/imx8mq-pinfunc.h

@@ -130,7 +130,7 @@
 #define MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD                                     0x0A4 0x30C 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_CMD_GPIO2_IO1                                      0x0A4 0x30C 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0                                 0x0A8 0x310 0x000 0x0 0x0
-#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x31  0x000 0x5 0x0
+#define MX8MQ_IOMUXC_SD1_DATA0_GPIO2_IO2                                    0x0A8 0x310 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1                                 0x0AC 0x314 0x000 0x0 0x0
 #define MX8MQ_IOMUXC_SD1_DATA1_GPIO2_IO3                                    0x0AC 0x314 0x000 0x5 0x0
 #define MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2                                 0x0B0 0x318 0x000 0x0 0x0

arch/arm64/boot/dts/marvell/armada-cp11x.dtsi

@@ -310,9 +310,11 @@
 		};
 
 		CP11X_LABEL(sata0): sata@540000 {
-			compatible = "marvell,armada-8k-ahci";
+			compatible = "marvell,armada-8k-ahci",
+			"generic-ahci";
 			reg = <0x540000 0x30000>;
 			dma-coherent;
+			interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&CP11X_LABEL(clk) 1 15>,
 				 <&CP11X_LABEL(clk) 1 16>;
 			#address-cells = <1>;
@@ -320,12 +322,10 @@
 			status = "disabled";
 
 			sata-port@0 {
-				interrupts = <109 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0>;
 			};
 
 			sata-port@1 {
-				interrupts = <107 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <1>;
 			};
 		};

drivers/bus/mvebu-mbus.c

@@ -618,7 +618,7 @@ mvebu_mbus_find_bridge_hole(uint64_t *start, uint64_t *end)
 		 * This part of the memory is above 4 GB, so we don't
 		 * care for the MBus bridge hole.
 		 */
-		if (reg_start >= 0x100000000ULL)
+		if ((u64)reg_start >= 0x100000000ULL)
 			continue;
 
 		/*

drivers/soc/fsl/qbman/qman.c

@@ -186,7 +186,7 @@ struct qm_eqcr_entry {
 	__be32 tag;
 	struct qm_fd fd;
 	u8 __reserved3[32];
-} __packed;
+} __packed __aligned(8);
 #define QM_EQCR_VERB_VBIT		0x80
 #define QM_EQCR_VERB_CMD_MASK		0x61	/* but only one value; */
 #define QM_EQCR_VERB_CMD_ENQUEUE	0x01