mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-10-31 08:44:41 +00:00
arm64: dts: qcom: msm8998: Introduce support for Sony Yoshino platform
This commit introduces support for the Sony Yoshino platform, using the MSM8998 SoC, including: - Sony Xperia XZ1 (codename Poplar), - Sony Xperia XZ1 Compact (codename Lilac), - Sony Xperia XZ Premium (codename Maple). All of the three aforementioned smartphones are sharing a 99% equal board configuration, with very small differences between each other, which is the reason for the introduction of a common msm8998-sony-xperia-yoshino DT. This base configuration includes regulators and project-wide pin configurations and it's made to boot to a serial console. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210909123733.367248-1-angelogioacchino.delregno@somainline.org
This commit is contained in:
AngeloGioacchino Del Regno
Bjorn Andersson
parent
36730a8f5f
commit
390883af89
5 changed files with 564 additions and 0 deletions
|
|
@ -41,6 +41,9 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-cheeseburger.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,19 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8998-sony-xperia-yoshino.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZ1 Compact";
|
||||
compatible = "sony,xperia-lilac", "qcom,msm8998";
|
||||
};
|
||||
|
||||
&vreg_l22a_2p85 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
};
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8998-sony-xperia-yoshino.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZ Premium";
|
||||
compatible = "sony,xperia-maple", "qcom,msm8998";
|
||||
|
||||
disp_dvdd_vreg: disp-dvdd-vreg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "disp_dvdd_en";
|
||||
regulator-min-microvolt = <1350000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
startup-delay-us = <0>;
|
||||
enable-active-high;
|
||||
gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&disp_dvdd_en>;
|
||||
};
|
||||
};
|
||||
|
||||
&pmi8998_gpio {
|
||||
disp_dvdd_en: disp-dvdd-en-active {
|
||||
pins = "gpio10";
|
||||
function = "normal";
|
||||
bias-disable;
|
||||
drive-push-pull;
|
||||
output-high;
|
||||
power-source = <0>;
|
||||
qcom,drive-strength = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&vreg_l22a_2p85 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
};
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "msm8998-sony-xperia-yoshino.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Sony Xperia XZ1";
|
||||
compatible = "sony,xperia-poplar", "qcom,msm8998";
|
||||
};
|
||||
|
||||
&vreg_l18a_2p85 {
|
||||
regulator-min-microvolt = <2850000>;
|
||||
regulator-max-microvolt = <2850000>;
|
||||
};
|
||||
|
||||
&vreg_l22a_2p85 {
|
||||
regulator-min-microvolt = <2700000>;
|
||||
regulator-max-microvolt = <2700000>;
|
||||
};
|
||||
475
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
Normal file
475
arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
Normal file
|
|
@ -0,0 +1,475 @@
|
|||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Copyright (c) 2021, AngeloGioacchino Del Regno
|
||||
* <angelogioacchino.delregno@somainline.org>
|
||||
* Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
|
||||
*/
|
||||
|
||||
#include "msm8998.dtsi"
|
||||
#include "pm8005.dtsi"
|
||||
#include "pm8998.dtsi"
|
||||
#include "pmi8998.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/sound/qcom,q6afe.h>
|
||||
#include <dt-bindings/sound/qcom,q6asm.h>
|
||||
|
||||
/ {
|
||||
/* required for bootloader to select correct board */
|
||||
qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */
|
||||
qcom,board-id = <8 0>;
|
||||
|
||||
board_vbat: vbat-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VBAT";
|
||||
|
||||
regulator-min-microvolt = <4000000>;
|
||||
regulator-max-microvolt = <4000000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
input-name = "gpio-keys";
|
||||
label = "Side buttons";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>,
|
||||
<&cam_snapshot_pin_a>;
|
||||
vol-down {
|
||||
label = "Volume Down";
|
||||
gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
gpio-key,wakeup;
|
||||
debounce-interval = <15>;
|
||||
};
|
||||
|
||||
camera-snapshot {
|
||||
label = "Camera Snapshot";
|
||||
gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <KEY_CAMERA>;
|
||||
debounce-interval = <15>;
|
||||
};
|
||||
|
||||
camera-focus {
|
||||
label = "Camera Focus";
|
||||
gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_KEY>;
|
||||
linux,code = <KEY_CAMERA_FOCUS>;
|
||||
debounce-interval = <15>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-hall-sensor {
|
||||
compatible = "gpio-keys";
|
||||
input-name = "hall-sensors";
|
||||
label = "Hall sensors";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hall_sensor0_default>;
|
||||
|
||||
hall-sensor0 {
|
||||
label = "Cover Hall Sensor";
|
||||
gpios = <&tlmm 124 GPIO_ACTIVE_LOW>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_LID>;
|
||||
gpio-key,wakeup;
|
||||
debounce-interval = <30>;
|
||||
};
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
|
||||
hyp_mem: memory@85800000 {
|
||||
reg = <0x0 0x85800000 0x0 0x3700000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
cont_splash_mem: memory@9d400000 {
|
||||
reg = <0x0 0x9d400000 0x0 0x2400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
zap_shader_region: memory@f6400000 {
|
||||
compatible = "shared-dma-pool";
|
||||
reg = <0x0 0xf6400000 0x0 0x2000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_region: memory@fe000000 {
|
||||
reg = <0x0 0xfe000000 0x0 0x800000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
qseecom_region: memory@fe800000 {
|
||||
reg = <0x0 0xfe800000 0x0 0x1400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ramoops@ffc00000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0xffc00000 0x0 0x100000>;
|
||||
record-size = <0x10000>;
|
||||
console-size = <0x60000>;
|
||||
ftrace-size = <0x10000>;
|
||||
pmsg-size = <0x20000>;
|
||||
ecc-size = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp2_uart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmcc {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&mmss_smmu {
|
||||
status = "ok";
|
||||
};
|
||||
|
||||
&pm8005_lsid1 {
|
||||
pm8005-regulators {
|
||||
compatible = "qcom,pm8005-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
|
||||
/* VDD_GFX supply */
|
||||
pm8005_s1: s1 {
|
||||
regulator-min-microvolt = <524000>;
|
||||
regulator-max-microvolt = <1088000>;
|
||||
regulator-enable-ramp-delay = <500>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_gpio {
|
||||
vol_down_pin_a: vol-down-active {
|
||||
pins = "gpio5";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
|
||||
cam_focus_pin_a: cam-focus-btn-active {
|
||||
pins = "gpio7";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
|
||||
cam_snapshot_pin_a: cam-snapshot-btn-active {
|
||||
pins = "gpio8";
|
||||
function = PMIC_GPIO_FUNC_NORMAL;
|
||||
bias-pull-up;
|
||||
input-enable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_pon {
|
||||
resin {
|
||||
compatible = "qcom,pm8941-resin";
|
||||
interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
};
|
||||
|
||||
&qusb2phy {
|
||||
status = "okay";
|
||||
|
||||
vdda-pll-supply = <&vreg_l12a_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
|
||||
};
|
||||
|
||||
&rpm_requests {
|
||||
pm8998-regulators {
|
||||
compatible = "qcom,rpm-pm8998-regulators";
|
||||
|
||||
vdd_s1-supply = <&vph_pwr>;
|
||||
vdd_s2-supply = <&vph_pwr>;
|
||||
vdd_s3-supply = <&vph_pwr>;
|
||||
vdd_s4-supply = <&vph_pwr>;
|
||||
vdd_s5-supply = <&vph_pwr>;
|
||||
vdd_s6-supply = <&vph_pwr>;
|
||||
vdd_s7-supply = <&vph_pwr>;
|
||||
vdd_s8-supply = <&vph_pwr>;
|
||||
vdd_s9-supply = <&vph_pwr>;
|
||||
vdd_s10-supply = <&vph_pwr>;
|
||||
vdd_s11-supply = <&vph_pwr>;
|
||||
vdd_s12-supply = <&vph_pwr>;
|
||||
vdd_s13-supply = <&vph_pwr>;
|
||||
vdd_l1_l27-supply = <&vreg_s7a_1p025>;
|
||||
vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
|
||||
vdd_l3_l11-supply = <&vreg_s7a_1p025>;
|
||||
vdd_l4_l5-supply = <&vreg_s7a_1p025>;
|
||||
vdd_l6-supply = <&vreg_s5a_2p04>;
|
||||
vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
|
||||
vdd_l9-supply = <&vreg_bob>;
|
||||
vdd_l10_l23_l25-supply = <&vreg_bob>;
|
||||
vdd_l13_l19_l21-supply = <&vreg_bob>;
|
||||
vdd_l16_l28-supply = <&vreg_bob>;
|
||||
vdd_l18_l22-supply = <&vreg_bob>;
|
||||
vdd_l20_l24-supply = <&vreg_bob>;
|
||||
vdd_l26-supply = <&vreg_s3a_1p35>;
|
||||
vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s3a_1p35: s3 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
vreg_s4a_1p8: s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-system-load = <100000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_s5a_2p04: s5 {
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2032000>;
|
||||
};
|
||||
vreg_s7a_1p025: s7 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1028000>;
|
||||
};
|
||||
vreg_l1a_0p875: l1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-system-load = <73400>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l2a_1p2: l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-system-load = <12560>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l3a_1p0: l3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
vreg_l5a_0p8: l5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
};
|
||||
vreg_l6a_1p8: l6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
vreg_l7a_1p8: l7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
vreg_l8a_1p2: l8 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
vreg_l9a_1p8: l9 {
|
||||
regulator-min-microvolt = <1808000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
};
|
||||
vreg_l10a_1p8: l10 {
|
||||
regulator-min-microvolt = <1808000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
};
|
||||
vreg_l11a_1p0: l11 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
};
|
||||
vreg_l12a_1p8: l12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
vreg_l13a_2p95: l13 {
|
||||
regulator-min-microvolt = <1808000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l14a_1p85: l14 {
|
||||
regulator-min-microvolt = <1848000>;
|
||||
regulator-max-microvolt = <1856000>;
|
||||
regulator-system-load = <32000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l15a_1p8: l15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
vreg_l16a_2p7: l16 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
};
|
||||
vreg_l17a_1p3: l17 {
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
};
|
||||
vreg_l18a_2p85: l18 {};
|
||||
vreg_l19a_2p7: l19 {
|
||||
regulator-min-microvolt = <2696000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
};
|
||||
vreg_l20a_2p95: l20 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-system-load = <10000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l21a_2p95: l21 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-system-load = <800000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l22a_2p85: l22 { };
|
||||
vreg_l23a_3p3: l23 {
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
};
|
||||
vreg_l24a_3p075: l24 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
};
|
||||
vreg_l25a_3p3: l25 {
|
||||
regulator-min-microvolt = <3104000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
};
|
||||
vreg_l26a_1p2: l26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-allow-set-load;
|
||||
};
|
||||
vreg_l28_3p0: l28 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
};
|
||||
vreg_lvs1a_1p8: lvs1 { };
|
||||
vreg_lvs2a_1p8: lvs2 { };
|
||||
};
|
||||
|
||||
pmi8998-regulators {
|
||||
compatible = "qcom,rpm-pmi8998-regulators";
|
||||
|
||||
vdd_bob-supply = <&vph_pwr>;
|
||||
|
||||
vreg_bob: bob {
|
||||
regulator-min-microvolt = <3312000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc2 {
|
||||
status = "okay";
|
||||
cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vmmc-supply = <&vreg_l21a_2p95>;
|
||||
vqmmc-supply = <&vreg_l13a_2p95>;
|
||||
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
|
||||
pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <81 4>;
|
||||
|
||||
mdp_vsync_n: mdp-vsync-n {
|
||||
pins = "gpio10";
|
||||
function = "mdp_vsync_a";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
nfc_ven: nfc-ven {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
msm_mclk0_default: msm-mclk0-active {
|
||||
pins = "gpio13";
|
||||
function = "cam_mclk";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
msm_mclk1_default: msm-mclk1-active {
|
||||
pins = "gpio14";
|
||||
function = "cam_mclk";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cci0_default: cci0-default {
|
||||
pins = "gpio18", "gpio19";
|
||||
function = "cci_i2c";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
cci1_default: cci1-default {
|
||||
pins = "gpio19", "gpio20";
|
||||
function = "cci_i2c";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
};
|
||||
|
||||
hall_sensor0_default: acc-cover-open {
|
||||
pins = "gpio124";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
drive-strength = <2>;
|
||||
input-enable;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* WARNING:
|
||||
* Disable UFS until card quirks are in to avoid unrecoverable hard-brick
|
||||
* that would happen as soon as the UFS card gets probed as, without the
|
||||
* required quirks, the bootloader will be erased right after card probe.
|
||||
*/
|
||||
&ufshc {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ufsphy {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_dwc3 {
|
||||
/* Force to peripheral until we have Type-C hooked up */
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb3phy {
|
||||
status = "okay";
|
||||
|
||||
vdda-phy-supply = <&vreg_l1a_0p875>;
|
||||
vdda-pll-supply = <&vreg_l2a_1p2>;
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue