mirror of
				git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
				synced 2025-10-31 16:54:21 +00:00 
			
		
		
		
	[POWERPC] 4xx: Add PPC4xx L2-cache support (440GX)
This patch adds support for the 256k L2 cache found on some IBM/AMCC 4xx PPC's. It introduces a common 4xx SoC file (sysdev/ppc4xx_soc.c) which currently "only" adds the L2 cache init code. Other common 4xx stuff can be added later here. The L2 cache handling code is a copy of Eugene's code in arch/ppc with small modifications. Tested on AMCC Taishan 440GX. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
This commit is contained in:
		
							parent
							
								
									145692a734
								
							
						
					
					
						commit
						2a7069190e
					
				
					 5 changed files with 272 additions and 0 deletions
				
			
		|  | @ -501,6 +501,9 @@ config FSL_PCI | |||
|  	bool | ||||
| 	select PPC_INDIRECT_PCI | ||||
| 
 | ||||
| config 4xx_SOC | ||||
| 	bool | ||||
| 
 | ||||
| # Yes MCA RS/6000s exist but Linux-PPC does not currently support any | ||||
| config MCA | ||||
| 	bool | ||||
|  |  | |||
|  | @ -129,6 +129,7 @@ config 440GP | |||
| 
 | ||||
| config 440GX | ||||
| 	bool | ||||
| 	select 4xx_SOC | ||||
| 	select IBM_NEW_EMAC_EMAC4 | ||||
| 	select IBM_NEW_EMAC_RGMII | ||||
| 	select IBM_NEW_EMAC_ZMII #test only | ||||
|  |  | |||
|  | @ -27,6 +27,7 @@ obj-$(CONFIG_PPC_INDIRECT_PCI)	+= indirect_pci.o | |||
| obj-$(CONFIG_PPC_I8259)		+= i8259.o | ||||
| obj-$(CONFIG_IPIC)		+= ipic.o | ||||
| obj-$(CONFIG_4xx)		+= uic.o | ||||
| obj-$(CONFIG_4xx_SOC)		+= ppc4xx_soc.o | ||||
| obj-$(CONFIG_XILINX_VIRTEX)	+= xilinx_intc.o | ||||
| obj-$(CONFIG_OF_RTC)		+= of_rtc.o | ||||
| ifeq ($(CONFIG_PCI),y) | ||||
|  |  | |||
							
								
								
									
										189
									
								
								arch/powerpc/sysdev/ppc4xx_soc.c
									
										
									
									
									
										Normal file
									
								
							
							
						
						
									
										189
									
								
								arch/powerpc/sysdev/ppc4xx_soc.c
									
										
									
									
									
										Normal file
									
								
							|  | @ -0,0 +1,189 @@ | |||
| /*
 | ||||
|  * IBM/AMCC PPC4xx SoC setup code | ||||
|  * | ||||
|  * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> | ||||
|  * | ||||
|  * L2 cache routines cloned from arch/ppc/syslib/ibm440gx_common.c which is: | ||||
|  *   Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> | ||||
|  *   Copyright (c) 2003 - 2006 Zultys Technologies | ||||
|  * | ||||
|  * This program is free software; you can redistribute  it and/or modify it | ||||
|  * under  the terms of  the GNU General  Public License as published by the | ||||
|  * Free Software Foundation;  either version 2 of the  License, or (at your | ||||
|  * option) any later version. | ||||
|  */ | ||||
| 
 | ||||
| #include <linux/stddef.h> | ||||
| #include <linux/kernel.h> | ||||
| #include <linux/init.h> | ||||
| #include <linux/errno.h> | ||||
| #include <linux/interrupt.h> | ||||
| #include <linux/irq.h> | ||||
| #include <linux/of_platform.h> | ||||
| 
 | ||||
| #include <asm/dcr.h> | ||||
| #include <asm/dcr-regs.h> | ||||
| 
 | ||||
| static u32 dcrbase_l2c; | ||||
| 
 | ||||
| /*
 | ||||
|  * L2-cache | ||||
|  */ | ||||
| 
 | ||||
| /* Issue L2C diagnostic command */ | ||||
| static inline u32 l2c_diag(u32 addr) | ||||
| { | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, addr); | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_DIAG); | ||||
| 	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) | ||||
| 		; | ||||
| 
 | ||||
| 	return mfdcr(dcrbase_l2c + DCRN_L2C0_DATA); | ||||
| } | ||||
| 
 | ||||
| static irqreturn_t l2c_error_handler(int irq, void *dev) | ||||
| { | ||||
| 	u32 sr = mfdcr(dcrbase_l2c + DCRN_L2C0_SR); | ||||
| 
 | ||||
| 	if (sr & L2C_SR_CPE) { | ||||
| 		/* Read cache trapped address */ | ||||
| 		u32 addr = l2c_diag(0x42000000); | ||||
| 		printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n", | ||||
| 		       addr); | ||||
| 	} | ||||
| 	if (sr & L2C_SR_TPE) { | ||||
| 		/* Read tag trapped address */ | ||||
| 		u32 addr = l2c_diag(0x82000000) >> 16; | ||||
| 		printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n", | ||||
| 		       addr); | ||||
| 	} | ||||
| 
 | ||||
| 	/* Clear parity errors */ | ||||
| 	if (sr & (L2C_SR_CPE | L2C_SR_TPE)){ | ||||
| 		mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); | ||||
| 		mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); | ||||
| 	} else { | ||||
| 		printk(KERN_EMERG "L2C: LRU error\n"); | ||||
| 	} | ||||
| 
 | ||||
| 	return IRQ_HANDLED; | ||||
| } | ||||
| 
 | ||||
| static int __init ppc4xx_l2c_probe(void) | ||||
| { | ||||
| 	struct device_node *np; | ||||
| 	u32 r; | ||||
| 	unsigned long flags; | ||||
| 	int irq; | ||||
| 	const u32 *dcrreg; | ||||
| 	u32 dcrbase_isram; | ||||
| 	int len; | ||||
| 	const u32 *prop; | ||||
| 	u32 l2_size; | ||||
| 
 | ||||
| 	np = of_find_compatible_node(NULL, NULL, "ibm,l2-cache"); | ||||
| 	if (!np) | ||||
| 		return 0; | ||||
| 
 | ||||
| 	/* Get l2 cache size */ | ||||
| 	prop = of_get_property(np, "cache-size", NULL); | ||||
| 	if (prop == NULL) { | ||||
| 		printk(KERN_ERR "%s: Can't get cache-size!\n", np->full_name); | ||||
| 		of_node_put(np); | ||||
| 		return -ENODEV; | ||||
| 	} | ||||
| 	l2_size = prop[0]; | ||||
| 
 | ||||
| 	/* Map DCRs */ | ||||
| 	dcrreg = of_get_property(np, "dcr-reg", &len); | ||||
| 	if (!dcrreg || (len != 4 * sizeof(u32))) { | ||||
| 		printk(KERN_ERR "%s: Can't get DCR register base !", | ||||
| 		       np->full_name); | ||||
| 		of_node_put(np); | ||||
| 		return -ENODEV; | ||||
| 	} | ||||
| 	dcrbase_isram = dcrreg[0]; | ||||
| 	dcrbase_l2c = dcrreg[2]; | ||||
| 
 | ||||
| 	/* Get and map irq number from device tree */ | ||||
| 	irq = irq_of_parse_and_map(np, 0); | ||||
| 	if (irq == NO_IRQ) { | ||||
| 		printk(KERN_ERR "irq_of_parse_and_map failed\n"); | ||||
| 		of_node_put(np); | ||||
| 		return -ENODEV; | ||||
| 	} | ||||
| 
 | ||||
| 	/* Install error handler */ | ||||
| 	if (request_irq(irq, l2c_error_handler, IRQF_DISABLED, "L2C", 0) < 0) { | ||||
| 		printk(KERN_ERR "Cannot install L2C error handler" | ||||
| 		       ", cache is not enabled\n"); | ||||
| 		of_node_put(np); | ||||
| 		return -ENODEV; | ||||
| 	} | ||||
| 
 | ||||
| 	local_irq_save(flags); | ||||
| 	asm volatile ("sync" ::: "memory"); | ||||
| 
 | ||||
| 	/* Disable SRAM */ | ||||
| 	mtdcr(dcrbase_isram + DCRN_SRAM0_DPC, | ||||
| 	      mfdcr(dcrbase_isram + DCRN_SRAM0_DPC) & ~SRAM_DPC_ENABLE); | ||||
| 	mtdcr(dcrbase_isram + DCRN_SRAM0_SB0CR, | ||||
| 	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB0CR) & ~SRAM_SBCR_BU_MASK); | ||||
| 	mtdcr(dcrbase_isram + DCRN_SRAM0_SB1CR, | ||||
| 	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB1CR) & ~SRAM_SBCR_BU_MASK); | ||||
| 	mtdcr(dcrbase_isram + DCRN_SRAM0_SB2CR, | ||||
| 	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB2CR) & ~SRAM_SBCR_BU_MASK); | ||||
| 	mtdcr(dcrbase_isram + DCRN_SRAM0_SB3CR, | ||||
| 	      mfdcr(dcrbase_isram + DCRN_SRAM0_SB3CR) & ~SRAM_SBCR_BU_MASK); | ||||
| 
 | ||||
| 	/* Enable L2_MODE without ICU/DCU */ | ||||
| 	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG) & | ||||
| 		~(L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_SS_MASK); | ||||
| 	r |= L2C_CFG_L2M | L2C_CFG_SS_256; | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); | ||||
| 
 | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_ADDR, 0); | ||||
| 
 | ||||
| 	/* Hardware Clear Command */ | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_HCC); | ||||
| 	while (!(mfdcr(dcrbase_l2c + DCRN_L2C0_SR) & L2C_SR_CC)) | ||||
| 		; | ||||
| 
 | ||||
| 	/* Clear Cache Parity and Tag Errors */ | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_CMD, L2C_CMD_CCP | L2C_CMD_CTE); | ||||
| 
 | ||||
| 	/* Enable 64G snoop region starting at 0 */ | ||||
| 	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP0) & | ||||
| 		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); | ||||
| 	r |= L2C_SNP_SSR_32G | L2C_SNP_ESR; | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP0, r); | ||||
| 
 | ||||
| 	r = mfdcr(dcrbase_l2c + DCRN_L2C0_SNP1) & | ||||
| 		~(L2C_SNP_BA_MASK | L2C_SNP_SSR_MASK); | ||||
| 	r |= 0x80000000 | L2C_SNP_SSR_32G | L2C_SNP_ESR; | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_SNP1, r); | ||||
| 
 | ||||
| 	asm volatile ("sync" ::: "memory"); | ||||
| 
 | ||||
| 	/* Enable ICU/DCU ports */ | ||||
| 	r = mfdcr(dcrbase_l2c + DCRN_L2C0_CFG); | ||||
| 	r &= ~(L2C_CFG_DCW_MASK | L2C_CFG_PMUX_MASK | L2C_CFG_PMIM | ||||
| 	       | L2C_CFG_TPEI | L2C_CFG_CPEI | L2C_CFG_NAM | L2C_CFG_NBRM); | ||||
| 	r |= L2C_CFG_ICU | L2C_CFG_DCU | L2C_CFG_TPC | L2C_CFG_CPC | L2C_CFG_FRAN | ||||
| 		| L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; | ||||
| 
 | ||||
| 	/* Check for 460EX/GT special handling */ | ||||
| 	if (of_device_is_compatible(np, "ibm,l2-cache-460ex")) | ||||
| 		r |= L2C_CFG_RDBW; | ||||
| 
 | ||||
| 	mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); | ||||
| 
 | ||||
| 	asm volatile ("sync; isync" ::: "memory"); | ||||
| 	local_irq_restore(flags); | ||||
| 
 | ||||
| 	printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10); | ||||
| 
 | ||||
| 	of_node_put(np); | ||||
| 	return 0; | ||||
| } | ||||
| arch_initcall(ppc4xx_l2c_probe); | ||||
|  | @ -68,4 +68,82 @@ | |||
| #define SDR0_UART3		0x0123 | ||||
| #define SDR0_CUST0		0x4000 | ||||
| 
 | ||||
| /*
 | ||||
|  * All those DCR register addresses are offsets from the base address | ||||
|  * for the SRAM0 controller (e.g. 0x20 on 440GX). The base address is | ||||
|  * excluded here and configured in the device tree. | ||||
|  */ | ||||
| #define DCRN_SRAM0_SB0CR	0x00 | ||||
| #define DCRN_SRAM0_SB1CR	0x01 | ||||
| #define DCRN_SRAM0_SB2CR	0x02 | ||||
| #define DCRN_SRAM0_SB3CR	0x03 | ||||
| #define  SRAM_SBCR_BU_MASK	0x00000180 | ||||
| #define  SRAM_SBCR_BS_64KB	0x00000800 | ||||
| #define  SRAM_SBCR_BU_RO	0x00000080 | ||||
| #define  SRAM_SBCR_BU_RW	0x00000180 | ||||
| #define DCRN_SRAM0_BEAR		0x04 | ||||
| #define DCRN_SRAM0_BESR0	0x05 | ||||
| #define DCRN_SRAM0_BESR1	0x06 | ||||
| #define DCRN_SRAM0_PMEG		0x07 | ||||
| #define DCRN_SRAM0_CID		0x08 | ||||
| #define DCRN_SRAM0_REVID	0x09 | ||||
| #define DCRN_SRAM0_DPC		0x0a | ||||
| #define  SRAM_DPC_ENABLE	0x80000000 | ||||
| 
 | ||||
| /*
 | ||||
|  * All those DCR register addresses are offsets from the base address | ||||
|  * for the SRAM0 controller (e.g. 0x30 on 440GX). The base address is | ||||
|  * excluded here and configured in the device tree. | ||||
|  */ | ||||
| #define DCRN_L2C0_CFG		0x00 | ||||
| #define  L2C_CFG_L2M		0x80000000 | ||||
| #define  L2C_CFG_ICU		0x40000000 | ||||
| #define  L2C_CFG_DCU		0x20000000 | ||||
| #define  L2C_CFG_DCW_MASK	0x1e000000 | ||||
| #define  L2C_CFG_TPC		0x01000000 | ||||
| #define  L2C_CFG_CPC		0x00800000 | ||||
| #define  L2C_CFG_FRAN		0x00200000 | ||||
| #define  L2C_CFG_SS_MASK	0x00180000 | ||||
| #define  L2C_CFG_SS_256		0x00000000 | ||||
| #define  L2C_CFG_CPIM		0x00040000 | ||||
| #define  L2C_CFG_TPIM		0x00020000 | ||||
| #define  L2C_CFG_LIM		0x00010000 | ||||
| #define  L2C_CFG_PMUX_MASK	0x00007000 | ||||
| #define  L2C_CFG_PMUX_SNP	0x00000000 | ||||
| #define  L2C_CFG_PMUX_IF	0x00001000 | ||||
| #define  L2C_CFG_PMUX_DF	0x00002000 | ||||
| #define  L2C_CFG_PMUX_DS	0x00003000 | ||||
| #define  L2C_CFG_PMIM		0x00000800 | ||||
| #define  L2C_CFG_TPEI		0x00000400 | ||||
| #define  L2C_CFG_CPEI		0x00000200 | ||||
| #define  L2C_CFG_NAM		0x00000100 | ||||
| #define  L2C_CFG_SMCM		0x00000080 | ||||
| #define  L2C_CFG_NBRM		0x00000040 | ||||
| #define  L2C_CFG_RDBW		0x00000008	/* only 460EX/GT */ | ||||
| #define DCRN_L2C0_CMD		0x01 | ||||
| #define  L2C_CMD_CLR		0x80000000 | ||||
| #define  L2C_CMD_DIAG		0x40000000 | ||||
| #define  L2C_CMD_INV		0x20000000 | ||||
| #define  L2C_CMD_CCP		0x10000000 | ||||
| #define  L2C_CMD_CTE		0x08000000 | ||||
| #define  L2C_CMD_STRC		0x04000000 | ||||
| #define  L2C_CMD_STPC		0x02000000 | ||||
| #define  L2C_CMD_RPMC		0x01000000 | ||||
| #define  L2C_CMD_HCC		0x00800000 | ||||
| #define DCRN_L2C0_ADDR		0x02 | ||||
| #define DCRN_L2C0_DATA		0x03 | ||||
| #define DCRN_L2C0_SR		0x04 | ||||
| #define  L2C_SR_CC		0x80000000 | ||||
| #define  L2C_SR_CPE		0x40000000 | ||||
| #define  L2C_SR_TPE		0x20000000 | ||||
| #define  L2C_SR_LRU		0x10000000 | ||||
| #define  L2C_SR_PCS		0x08000000 | ||||
| #define DCRN_L2C0_REVID		0x05 | ||||
| #define DCRN_L2C0_SNP0		0x06 | ||||
| #define DCRN_L2C0_SNP1		0x07 | ||||
| #define  L2C_SNP_BA_MASK	0xffff0000 | ||||
| #define  L2C_SNP_SSR_MASK	0x0000f000 | ||||
| #define  L2C_SNP_SSR_32G	0x0000f000 | ||||
| #define  L2C_SNP_ESR		0x00000800 | ||||
| 
 | ||||
| #endif /* __DCR_REGS_H__ */ | ||||
|  |  | |||
		Loading…
	
	Add table
		
		Reference in a new issue
	
	 Stefan Roese
						Stefan Roese