mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-18 22:14:16 +00:00
arm64: dts: rockchip: Add rk3399-evb-ind board
General feature for rk3399 industry evaluation board: - Rockchip RK3399 - 4GB LPDDR4 - emmc5.1 - SDIO3.0 compatible TF card - 1x HDMI2.0a TX - 1x HDMI1.4b RX with TC358749XBG HDMI to MIPI CSI2 bridge chip - 1x type-c DisplayPort - 3x USB3.0 Host - 1x USB2.0 Host - 1x Ethernet / USB3.0 to Ethernet Tested with HDMI/GPU/USB2.0/USB3.0/TF card/emmc. Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com> Link: https://lore.kernel.org/r/20250506034347.57-3-kernel@airkyi.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Chaoyi Chen
Heiko Stuebner
parent
ff7c417e54
commit
2435fca058
2 changed files with 495 additions and 0 deletions
|
|
@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-eaidk-610.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb-ind.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ficus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-firefly.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-bob.dtb
|
||||
|
|
|
|||
494
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
Normal file
494
arch/arm64/boot/dts/rockchip/rk3399-evb-ind.dts
Normal file
|
|
@ -0,0 +1,494 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2025 Rockchip Electronics Co., Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3399.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Rockchip RK3399 EVB IND LPDDR4 Board";
|
||||
compatible = "rockchip,rk3399-evb-ind", "rockchip,rk3399";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
status = "okay";
|
||||
|
||||
vdd_gpu: regulator@10 {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x10>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc_buck5>;
|
||||
vcc6-supply = <&vcc_buck5>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: DCDC_REG4 {
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_buck5: DCDC_REG5 {
|
||||
regulator-name = "vcc_buck5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <2200000>;
|
||||
regulator-min-microvolt = <2200000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2200000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_0v9: LDO_REG1 {
|
||||
regulator-name = "vcca_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: LDO_REG2 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_soc: LDO_REG3 {
|
||||
regulator-name = "vcc0v9_soc";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-min-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG4 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1v5_dvp: LDO_REG5 {
|
||||
regulator-name = "vdd1v5_dvp";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG7 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG8 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG9 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_usb: SWITCH_REG1 {
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_3v3: SWITCH_REG2 {
|
||||
regulator-name = "vccio_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
audio-supply = <&vcca_1v8>;
|
||||
bt656-supply = <&vcc_3v0>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
sdmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
vsel1_gpio: vsel1 {
|
||||
rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2 {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
keep-power-in-suspend;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_host {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy1_otg {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue