mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-18 22:14:16 +00:00
arm64: dts: mediatek: Introduce MT8186 Steelix
The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4, is a convertible device based on a common design of the same name. The device comes in different variants. Of them, whether a world facing camera is integrated is the only differentiating factor between the two device trees added. The different SKU IDs describe this alone. The other device difference is the trackpad component used. This is simply handled by having both possible components described in the device tree, and letting the implementation figure out which one is actually available. The system bootloader / firmware does not differentiate this in that they share the same SKU IDs. Signed-off-by: Chen-Yu Tsai <wenst@chromium.org> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20240126083802.2728610-8-wenst@chromium.org Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
This commit is contained in:
Chen-Yu Tsai
AngeloGioacchino Del Regno
parent
8855d01fb8
commit
09828b16d0
4 changed files with 237 additions and 0 deletions
|
|
@ -51,6 +51,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
|
|||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
|
||||
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,18 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright 2022 Google LLC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt8186-corsola-steelix.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Steelix board";
|
||||
compatible = "google,steelix-sku131072", "google,steelix",
|
||||
"mediatek,mt8186";
|
||||
chassis-type = "convertible";
|
||||
};
|
||||
|
||||
&mt6366codec {
|
||||
mediatek,dmic-mode = <0>; /* two-wire */
|
||||
};
|
||||
|
|
@ -0,0 +1,18 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright 2022 Google LLC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt8186-corsola-steelix.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Google Steelix board";
|
||||
compatible = "google,steelix-sku131073", "google,steelix",
|
||||
"mediatek,mt8186";
|
||||
chassis-type = "convertible";
|
||||
};
|
||||
|
||||
&mt6366codec {
|
||||
mediatek,dmic-mode = <1>; /* one-wire */
|
||||
};
|
||||
199
arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
Normal file
199
arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
Normal file
|
|
@ -0,0 +1,199 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright 2022 Google LLC
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "mt8186-corsola.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/{
|
||||
pp1000_edpbrdg: regulator-pp1000-edpbrdg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1000_edpbrdg";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&en_pp1000_edpbrdg>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&pp3300_z2>;
|
||||
};
|
||||
|
||||
pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp1800_edpbrdg_dx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&en_pp1800_edpbrdg>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&mt6366_vio18_reg>;
|
||||
};
|
||||
|
||||
pp3300_edp_dx: regulator-pp3300-edp-dx {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "pp3300_edp_dx";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&en_pp3300_edpbrdg>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&pp3300_z2>;
|
||||
};
|
||||
};
|
||||
|
||||
&dsi_out {
|
||||
remote-endpoint = <&anx7625_in>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
anx_bridge: anx7625@58 {
|
||||
compatible = "analogix,anx7625";
|
||||
reg = <0x58>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&anx7625_pins>;
|
||||
enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
|
||||
vdd10-supply = <&pp1000_edpbrdg>;
|
||||
vdd18-supply = <&pp1800_edpbrdg_dx>;
|
||||
vdd33-supply = <&pp3300_edp_dx>;
|
||||
analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
|
||||
analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
|
||||
anx7625_in: endpoint {
|
||||
remote-endpoint = <&dsi_out>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
|
||||
anx7625_out: endpoint {
|
||||
remote-endpoint = <&panel_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
aux-bus {
|
||||
panel: panel {
|
||||
compatible = "edp-panel";
|
||||
power-supply = <&pp3300_disp_x>;
|
||||
backlight = <&backlight_lcd0>;
|
||||
|
||||
port {
|
||||
panel_in: endpoint {
|
||||
remote-endpoint = <&anx7625_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
touchscreen: touchscreen@5d {
|
||||
compatible = "goodix,gt7375p";
|
||||
reg = <0x5d>;
|
||||
interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&touchscreen_pins>;
|
||||
reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
|
||||
vdd-supply = <&pp3300_s3>;
|
||||
goodix,no-reset-during-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
i2c-scl-internal-delay-ns = <22000>;
|
||||
|
||||
/* second source component */
|
||||
trackpad@2c {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x2c>;
|
||||
hid-descr-addr = <0x20>;
|
||||
interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
|
||||
vdd-supply = <&pp3300_s3>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&keyboard_controller {
|
||||
function-row-physmap = <
|
||||
MATRIX_KEY(0x00, 0x02, 0) /* T1 */
|
||||
MATRIX_KEY(0x03, 0x02, 0) /* T2 */
|
||||
MATRIX_KEY(0x02, 0x02, 0) /* T3 */
|
||||
MATRIX_KEY(0x01, 0x02, 0) /* T4 */
|
||||
MATRIX_KEY(0x03, 0x04, 0) /* T5 */
|
||||
MATRIX_KEY(0x02, 0x04, 0) /* T6 */
|
||||
MATRIX_KEY(0x01, 0x04, 0) /* T7 */
|
||||
MATRIX_KEY(0x02, 0x09, 0) /* T8 */
|
||||
MATRIX_KEY(0x01, 0x09, 0) /* T9 */
|
||||
MATRIX_KEY(0x00, 0x04, 0) /* T10 */
|
||||
>;
|
||||
|
||||
linux,keymap = <
|
||||
MATRIX_KEY(0x00, 0x02, KEY_BACK)
|
||||
MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
|
||||
MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
|
||||
MATRIX_KEY(0x01, 0x02, KEY_SCALE)
|
||||
MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
|
||||
MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
|
||||
MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
|
||||
MATRIX_KEY(0x02, 0x09, KEY_MUTE)
|
||||
MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
|
||||
MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
|
||||
CROS_STD_MAIN_KEYMAP
|
||||
>;
|
||||
};
|
||||
|
||||
&pio {
|
||||
anx7625_pins: anx7625-pins {
|
||||
pins-int {
|
||||
pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
|
||||
input-enable;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pins-reset {
|
||||
pinmux = <PINMUX_GPIO98__FUNC_GPIO98>;
|
||||
output-low;
|
||||
};
|
||||
|
||||
pins-power-en {
|
||||
pinmux = <PINMUX_GPIO96__FUNC_GPIO96>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
|
||||
pins-vreg-en {
|
||||
pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
|
||||
pins-vreg-en {
|
||||
pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
|
||||
en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
|
||||
pins-vreg-en {
|
||||
pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
Loading…
Add table
Reference in a new issue