public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-08-03 15:55:38 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/drivers/net/wireless/ath/ath12k/qmi.c

3401 lines
85 KiB
C
Raw Normal View History

wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2021 The Linux Foundation. All rights reserved.
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
* Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
*/
#include <linux/elf.h>
#include "qmi.h"
#include "core.h"
#include "debug.h"
#include <linux/of.h>
#include <linux/firmware.h>
#define SLEEP_CLOCK_SELECT_INTERNAL_BIT 0x02
#define HOST_CSTATE_BIT 0x04
#define PLATFORM_CAP_PCIE_GLOBAL_RESET 0x08
#define ATH12K_QMI_MAX_CHUNK_SIZE 2097152
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info wlfw_host_mlo_chip_info_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct wlfw_host_mlo_chip_info_s_v01,
chip_id),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct wlfw_host_mlo_chip_info_s_v01,
num_local_links),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = QMI_WLFW_MAX_NUM_MLO_LINKS_PER_CHIP_V01,
.elem_size = sizeof(u8),
.array_type = STATIC_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct wlfw_host_mlo_chip_info_s_v01,
hw_link_id),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = QMI_WLFW_MAX_NUM_MLO_LINKS_PER_CHIP_V01,
.elem_size = sizeof(u8),
.array_type = STATIC_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct wlfw_host_mlo_chip_info_s_v01,
valid_mlo_link_id),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_host_cap_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
num_clients_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
num_clients),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
wake_msi_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
wake_msi),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
gpios_valid),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
gpios_len),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = QMI_WLFW_MAX_NUM_GPIO_V01,
.elem_size = sizeof(u32),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
gpios),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
nm_modem_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
nm_modem),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
bdf_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
bdf_support),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
bdf_cache_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
bdf_cache_support),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x16,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
m3_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x16,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
m3_support),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
m3_cache_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
m3_cache_support),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x18,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_filesys_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x18,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_filesys_support),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x19,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_cache_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x19,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_cache_support),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1A,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_done_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1A,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_done),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1B,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mem_bucket_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x1B,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mem_bucket),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1C,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mem_cfg_mode_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1C,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mem_cfg_mode),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1D,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_duration_valid),
},
{
.data_type = QMI_UNSIGNED_2_BYTE,
.elem_len = 1,
.elem_size = sizeof(u16),
.array_type = NO_ARRAY,
.tlv_type = 0x1D,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
cal_duraiton),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1E,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
platform_name_valid),
},
{
.data_type = QMI_STRING,
.elem_len = QMI_WLANFW_MAX_PLATFORM_NAME_LEN_V01 + 1,
.elem_size = sizeof(char),
.array_type = NO_ARRAY,
.tlv_type = 0x1E,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
platform_name),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1F,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
ddr_range_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLANFW_MAX_HOST_DDR_RANGE_SIZE_V01,
.elem_size = sizeof(struct qmi_wlanfw_host_ddr_range),
.array_type = STATIC_ARRAY,
.tlv_type = 0x1F,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
ddr_range),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x20,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
host_build_type_valid),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size = sizeof(enum qmi_wlanfw_host_build_type),
.array_type = NO_ARRAY,
.tlv_type = 0x20,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
host_build_type),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x21,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_capable_valid),
},
{
wifi: ath12k: correct the data_type from QMI_OPT_FLAG to QMI_UNSIGNED_1_BYTE for mlo_capable Currently, the encoding rule for field mlo_capable in struct qmi_wlanfw_host_cap_req_msg_v01 defined in array qmi_wlanfw_host_cap_req_msg_v01_ei uses type QMI_OPT_FLAG. Unfortunately, all ath12k firmware actually expects this field to be of type NON QMI_OPT_FLAG such as QMI_UNSIGNED_1_BYTE/QMI_UNSIGNED_8_BYTE... And as a result, firmware is unable to correctly decode the mlo_capable field. Change the ath12k definition as QMI_UNSIGNED_1_BYTE to match the firmware definition so that firmware can correctly parse the mlo_capable info from message QMI_WLANFW_HOST_CAP_REQ_V01 at wlan load time. This is just an accidental typo and that both WCN7850 and QCN9274 firmwares use QMI_UNSIGNED_1_BYTE. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230726093857.3610-1-quic_wgong@quicinc.com
2023-07-26 05:38:57 -04:00
.data_type = QMI_UNSIGNED_1_BYTE,
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x21,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_capable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x22,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_chip_id_valid),
},
{
.data_type = QMI_UNSIGNED_2_BYTE,
.elem_len = 1,
.elem_size = sizeof(u16),
.array_type = NO_ARRAY,
.tlv_type = 0x22,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_chip_id),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x23,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_group_id_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x23,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_group_id),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x24,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
max_mlo_peer_valid),
},
{
.data_type = QMI_UNSIGNED_2_BYTE,
.elem_len = 1,
.elem_size = sizeof(u16),
.array_type = NO_ARRAY,
.tlv_type = 0x24,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
max_mlo_peer),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x25,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_num_chips_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x25,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_num_chips),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x26,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_chip_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLFW_MAX_NUM_MLO_CHIPS_V01,
.elem_size = sizeof(struct wlfw_host_mlo_chip_info_s_v01),
.array_type = STATIC_ARRAY,
.tlv_type = 0x26,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
mlo_chip_info),
.ei_array = wlfw_host_mlo_chip_info_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x27,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
feature_list_valid),
},
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0x27,
.offset = offsetof(struct qmi_wlanfw_host_cap_req_msg_v01,
feature_list),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_host_cap_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_host_cap_resp_msg_v01, resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
static const struct qmi_elem_info qmi_wlanfw_phy_cap_req_msg_v01_ei[] = {
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
static const struct qmi_elem_info qmi_wlanfw_phy_cap_resp_msg_v01_ei[] = {
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01, resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
num_phy_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
num_phy),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
board_id_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
board_id),
},
wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capability New parameter 'single_chip_mlo_support' was added in QMI PHY capability response message. This is an optional parameter added in QCN9274 firmware. This parameter states if the firmware supports Single-Link Operation (SLO) and Multi-Link Operation (MLO) within the same device. If single_chip_mlo_support = 1, then intra device SLO/MLO is supported in the firmware. If single_chip_mlo_support = 0, then intra device SLO/MLO is not supported in the firmware. Hence, add support to read 'single_chip_mlo_support' parameter from the QMI PHY capability response message. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
2024-04-23 12:32:06 +03:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
single_chip_mlo_support_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_phy_cap_resp_msg_v01,
single_chip_mlo_support),
},
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_ind_register_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
fw_ready_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
fw_ready_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
initiate_cal_download_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
initiate_cal_download_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
initiate_cal_update_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
initiate_cal_update_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
msa_ready_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
msa_ready_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
pin_connect_result_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
pin_connect_result_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
client_id_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
client_id),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x16,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
request_mem_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x16,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
request_mem_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
fw_mem_ready_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
fw_mem_ready_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x18,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
fw_init_done_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x18,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
fw_init_done_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x19,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
rejuvenate_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x19,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
rejuvenate_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1A,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
xo_cal_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1A,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
xo_cal_enable),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1B,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
cal_done_enable_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1B,
.offset = offsetof(struct qmi_wlanfw_ind_register_req_msg_v01,
cal_done_enable),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_ind_register_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_ind_register_resp_msg_v01,
resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_ind_register_resp_msg_v01,
fw_status_valid),
},
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_ind_register_resp_msg_v01,
fw_status),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_mem_cfg_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_cfg_s_v01, offset),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_cfg_s_v01, size),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_cfg_s_v01, secure_flag),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_mem_seg_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_s_v01,
size),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size = sizeof(enum qmi_wlanfw_mem_type_enum_v01),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_s_v01, type),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_s_v01, mem_cfg_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLANFW_MAX_NUM_MEM_CFG_V01,
.elem_size = sizeof(struct qmi_wlanfw_mem_cfg_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_s_v01, mem_cfg),
.ei_array = qmi_wlanfw_mem_cfg_s_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_request_mem_ind_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_request_mem_ind_msg_v01,
mem_seg_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = ATH12K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01,
.elem_size = sizeof(struct qmi_wlanfw_mem_seg_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_request_mem_ind_msg_v01,
mem_seg),
.ei_array = qmi_wlanfw_mem_seg_s_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_mem_seg_resp_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_resp_s_v01, addr),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_resp_s_v01, size),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size = sizeof(enum qmi_wlanfw_mem_type_enum_v01),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_resp_s_v01, type),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_mem_seg_resp_s_v01, restore),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_respond_mem_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_respond_mem_req_msg_v01,
mem_seg_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = ATH12K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01,
.elem_size = sizeof(struct qmi_wlanfw_mem_seg_resp_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_respond_mem_req_msg_v01,
mem_seg),
.ei_array = qmi_wlanfw_mem_seg_resp_s_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_respond_mem_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_respond_mem_resp_msg_v01,
resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_cap_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_rf_chip_info_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_rf_chip_info_s_v01,
chip_id),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_rf_chip_info_s_v01,
chip_family),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_rf_board_info_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_rf_board_info_s_v01,
board_id),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_soc_info_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_soc_info_s_v01, soc_id),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_dev_mem_info_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_dev_mem_info_s_v01,
start),
},
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_dev_mem_info_s_v01,
size),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_fw_version_info_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_fw_version_info_s_v01,
fw_version),
},
{
.data_type = QMI_STRING,
.elem_len = ATH12K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01 + 1,
.elem_size = sizeof(char),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_fw_version_info_s_v01,
fw_build_timestamp),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_cap_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01, resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
chip_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_wlanfw_rf_chip_info_s_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
chip_info),
.ei_array = qmi_wlanfw_rf_chip_info_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
board_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_wlanfw_rf_board_info_s_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
board_info),
.ei_array = qmi_wlanfw_rf_board_info_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
soc_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_wlanfw_soc_info_s_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
soc_info),
.ei_array = qmi_wlanfw_soc_info_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
fw_version_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_wlanfw_fw_version_info_s_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
fw_version_info),
.ei_array = qmi_wlanfw_fw_version_info_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
fw_build_id_valid),
},
{
.data_type = QMI_STRING,
.elem_len = ATH12K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 + 1,
.elem_size = sizeof(char),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
fw_build_id),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
num_macs_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
num_macs),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x16,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
voltage_mv_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x16,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
voltage_mv),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
time_freq_hz_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
time_freq_hz),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x18,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
otp_version_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x18,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
otp_version),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x19,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
eeprom_caldata_read_timeout_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x19,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
eeprom_caldata_read_timeout),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1A,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
fw_caps_valid),
},
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0x1A,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01, fw_caps),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1B,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
rd_card_chain_cap_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x1B,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
rd_card_chain_cap),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x1C,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01,
dev_mem_info_valid),
},
{
.data_type = QMI_STRUCT,
.elem_len = ATH12K_QMI_WLFW_MAX_DEV_MEM_NUM_V01,
.elem_size = sizeof(struct qmi_wlanfw_dev_mem_info_s_v01),
.array_type = STATIC_ARRAY,
.tlv_type = 0x1C,
.offset = offsetof(struct qmi_wlanfw_cap_resp_msg_v01, dev_mem),
.ei_array = qmi_wlanfw_dev_mem_info_s_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_bdf_download_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
valid),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
file_id_valid),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size = sizeof(enum qmi_wlanfw_cal_temp_id_enum_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
file_id),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
total_size_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
total_size),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
seg_id_valid),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
seg_id),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
data_valid),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u16),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
data_len),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = QMI_WLANFW_MAX_DATA_SIZE_V01,
.elem_size = sizeof(u8),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
data),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
end_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x14,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
end),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
bdf_type_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x15,
.offset = offsetof(struct qmi_wlanfw_bdf_download_req_msg_v01,
bdf_type),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_bdf_download_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_bdf_download_resp_msg_v01,
resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_m3_info_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_8_BYTE,
.elem_len = 1,
.elem_size = sizeof(u64),
.array_type = NO_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_m3_info_req_msg_v01, addr),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_m3_info_req_msg_v01, size),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_m3_info_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_m3_info_resp_msg_v01, resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_ce_tgt_pipe_cfg_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01,
pipe_num),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size = sizeof(enum qmi_wlanfw_pipedir_enum_v01),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01,
pipe_dir),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01,
nentries),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01,
nbytes_max),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01,
flags),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_ce_svc_pipe_cfg_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_svc_pipe_cfg_s_v01,
service_id),
},
{
.data_type = QMI_SIGNED_4_BYTE_ENUM,
.elem_len = 1,
.elem_size = sizeof(enum qmi_wlanfw_pipedir_enum_v01),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_svc_pipe_cfg_s_v01,
pipe_dir),
},
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_ce_svc_pipe_cfg_s_v01,
pipe_num),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_shadow_reg_cfg_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_2_BYTE,
.elem_len = 1,
.elem_size = sizeof(u16),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_shadow_reg_cfg_s_v01, id),
},
{
.data_type = QMI_UNSIGNED_2_BYTE,
.elem_len = 1,
.elem_size = sizeof(u16),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_shadow_reg_cfg_s_v01,
offset),
},
{
.data_type = QMI_EOTI,
.array_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_shadow_reg_v3_cfg_s_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0,
.offset = offsetof(struct qmi_wlanfw_shadow_reg_v3_cfg_s_v01,
addr),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_wlan_mode_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_UNSIGNED_4_BYTE,
.elem_len = 1,
.elem_size = sizeof(u32),
.array_type = NO_ARRAY,
.tlv_type = 0x01,
.offset = offsetof(struct qmi_wlanfw_wlan_mode_req_msg_v01,
mode),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_wlan_mode_req_msg_v01,
hw_debug_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_wlan_mode_req_msg_v01,
hw_debug),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_wlan_mode_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_wlan_mode_resp_msg_v01,
resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_wlan_cfg_req_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
host_version_valid),
},
{
.data_type = QMI_STRING,
.elem_len = QMI_WLANFW_MAX_STR_LEN_V01 + 1,
.elem_size = sizeof(char),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
host_version),
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
tgt_cfg_valid),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
tgt_cfg_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLANFW_MAX_NUM_CE_V01,
.elem_size = sizeof(struct qmi_wlanfw_ce_tgt_pipe_cfg_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x11,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
tgt_cfg),
.ei_array = qmi_wlanfw_ce_tgt_pipe_cfg_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
svc_cfg_valid),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
svc_cfg_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLANFW_MAX_NUM_SVC_V01,
.elem_size = sizeof(struct qmi_wlanfw_ce_svc_pipe_cfg_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x12,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
svc_cfg),
.ei_array = qmi_wlanfw_ce_svc_pipe_cfg_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
shadow_reg_valid),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
shadow_reg_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLANFW_MAX_NUM_SHADOW_REG_V01,
.elem_size = sizeof(struct qmi_wlanfw_shadow_reg_cfg_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x13,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
shadow_reg),
.ei_array = qmi_wlanfw_shadow_reg_cfg_s_v01_ei,
},
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
shadow_reg_v3_valid),
},
{
.data_type = QMI_DATA_LEN,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
shadow_reg_v3_len),
},
{
.data_type = QMI_STRUCT,
.elem_len = QMI_WLANFW_MAX_NUM_SHADOW_REG_V3_V01,
.elem_size = sizeof(struct qmi_wlanfw_shadow_reg_v3_cfg_s_v01),
.array_type = VAR_LEN_ARRAY,
.tlv_type = 0x17,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_req_msg_v01,
shadow_reg_v3),
.ei_array = qmi_wlanfw_shadow_reg_v3_cfg_s_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_wlan_cfg_resp_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_wlan_cfg_resp_msg_v01, resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_mem_ready_ind_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
},
};
wifi: ath12k: Make QMI message rules const Commit ff6d365898d4 ("soc: qcom: qmi: use const for struct qmi_elem_info") allows QMI message encoding/decoding rules to be const, so do that for ath12k. Compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231217-ath12k-qmi_elem_info-const-v1-1-7ebb0de0a2b6@quicinc.com
2023-12-17 09:26:46 -08:00
static const struct qmi_elem_info qmi_wlanfw_fw_ready_ind_msg_v01_ei[] = {
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
},
};
wifi: ath12k: add support for collecting firmware log Currently there is no way to collect firmware log because firmware does not send it to host. Also host does not handle WMI_DIAG_EVENTID which is used by firmware to upload firmware log. So add support for it by firstly enabling firmware log upload via a QMI message, and secondly processing WMI DIAG event to expose it to userspace via trace event. This change applies to both WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240115023726.2866-1-quic_bqiang@quicinc.com
2024-01-18 07:53:48 +02:00
static const struct qmi_elem_info qmi_wlanfw_wlan_ini_req_msg_v01_ei[] = {
{
.data_type = QMI_OPT_FLAG,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_wlan_ini_req_msg_v01,
enable_fwlog_valid),
},
{
.data_type = QMI_UNSIGNED_1_BYTE,
.elem_len = 1,
.elem_size = sizeof(u8),
.array_type = NO_ARRAY,
.tlv_type = 0x10,
.offset = offsetof(struct qmi_wlanfw_wlan_ini_req_msg_v01,
enable_fwlog),
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
static const struct qmi_elem_info qmi_wlanfw_wlan_ini_resp_msg_v01_ei[] = {
{
.data_type = QMI_STRUCT,
.elem_len = 1,
.elem_size = sizeof(struct qmi_response_type_v01),
.array_type = NO_ARRAY,
.tlv_type = 0x02,
.offset = offsetof(struct qmi_wlanfw_wlan_ini_resp_msg_v01,
resp),
.ei_array = qmi_response_type_v01_ei,
},
{
.data_type = QMI_EOTI,
.array_type = NO_ARRAY,
.tlv_type = QMI_COMMON_TLV_TYPE,
},
};
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
static void ath12k_host_cap_parse_mlo(struct ath12k_base *ab,
struct qmi_wlanfw_host_cap_req_msg_v01 *req)
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
{
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
struct wlfw_host_mlo_chip_info_s_v01 *info;
u8 hw_link_id = 0;
int i;
wifi: ath12k: set mlo_capable_flags based on QMI PHY capability Currently, mlo_capable_flags is set to zero if dualmac device is detected based on One Time Programmable (OTP) register value. This is not generic and in future dualmac devices may support Single Link Operation (SLO) and Multi Link Operation (MLO). Thus, set mlo_capable_flags based on 'single_chip_mlo_support' parameter from QMI PHY capability response message from the firmware. Also, add check on mlo_capable_flags to disable MLO parameter in the host capability QMI request message. If the firmware does not respond with this optional parameter 'single_chip_mlo_support' in QMI PHY capability response, default ab->mlo_capable_flags is used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-3-quic_rajkbhag@quicinc.com
2024-04-23 12:32:06 +03:00
if (!(ab->mlo_capable_flags & ATH12K_INTRA_DEVICE_MLO_SUPPORT)) {
ath12k_dbg(ab, ATH12K_DBG_QMI,
"intra device MLO is disabled hence skip QMI MLO cap");
return;
}
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
if (!ab->qmi.num_radios || ab->qmi.num_radios == U8_MAX) {
wifi: ath12k: fix link capable flags By default driver supports intra-device SLO/MLO, the link capability flags reflect this. When the QMI PHY capability learning fails driver not enable the MLO parameter in the host capability QMI request message. In this case, reset the device link capability flags to zero (SLO/MLO not support) to accurately represent the capabilities. Found in code review. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00188-QCAHKSWPL_SILICONZ-1 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240403042056.1504209-3-quic_periyasa@quicinc.com
2024-04-05 15:22:09 +03:00
ab->mlo_capable_flags = 0;
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
ath12k_dbg(ab, ATH12K_DBG_QMI,
"skip QMI MLO cap due to invalid num_radio %d\n",
ab->qmi.num_radios);
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
return;
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
}
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
req->mlo_capable_valid = 1;
req->mlo_capable = 1;
req->mlo_chip_id_valid = 1;
req->mlo_chip_id = 0;
req->mlo_group_id_valid = 1;
req->mlo_group_id = 0;
req->max_mlo_peer_valid = 1;
/* Max peer number generally won't change for the same device
* but needs to be synced with host driver.
*/
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
req->max_mlo_peer = ab->hw_params->max_mlo_peer;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
req->mlo_num_chips_valid = 1;
req->mlo_num_chips = 1;
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
info = &req->mlo_chip_info[0];
info->chip_id = 0;
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
info->num_local_links = ab->qmi.num_radios;
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
for (i = 0; i < info->num_local_links; i++) {
info->hw_link_id[i] = hw_link_id;
info->valid_mlo_link_id[i] = 1;
hw_link_id++;
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
req->mlo_chip_info_valid = 1;
}
static int ath12k_qmi_host_cap_send(struct ath12k_base *ab)
{
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_host_cap_req_msg_v01 req = {};
struct qmi_wlanfw_host_cap_resp_msg_v01 resp = {};
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int ret = 0;
req.num_clients_valid = 1;
req.num_clients = 1;
req.mem_cfg_mode = ab->qmi.target_mem_mode;
req.mem_cfg_mode_valid = 1;
req.bdf_support_valid = 1;
req.bdf_support = 1;
req.m3_support_valid = 1;
req.m3_support = 1;
req.m3_cache_support_valid = 1;
req.m3_cache_support = 1;
req.cal_done_valid = 1;
req.cal_done = ab->qmi.cal_done;
wifi: ath12k: add qmi_cnss_feature_bitmap field to hardware parameters Currently the CNSS (Connectivity Subsystem) QMI feature is assigned to qmi_wlanfw_host_cap_req_msg_v01 request directly, this prevents chip-specific CNSS features from being added easily. Solve this by adding a new field qmi_cnss_feature_bitmap to hw_params so chip-specific CNSS features can be assigned to this field and later assigned to qmi_wlanfw_host_cap_req_msg_v01 request. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230404032057.3236122-2-quic_cjhuang@quicinc.com
2023-04-21 12:44:56 +03:00
if (ab->hw_params->qmi_cnss_feature_bitmap) {
req.feature_list_valid = 1;
req.feature_list = ab->hw_params->qmi_cnss_feature_bitmap;
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
/* BRINGUP: here we are piggybacking a lot of stuff using
* internal_sleep_clock, should it be split?
*/
if (ab->hw_params->internal_sleep_clock) {
req.nm_modem_valid = 1;
/* Notify firmware that this is non-qualcomm platform. */
req.nm_modem |= HOST_CSTATE_BIT;
/* Notify firmware about the sleep clock selection,
* nm_modem_bit[1] is used for this purpose. Host driver on
* non-qualcomm platforms should select internal sleep
* clock.
*/
req.nm_modem |= SLEEP_CLOCK_SELECT_INTERNAL_BIT;
req.nm_modem |= PLATFORM_CAP_PCIE_GLOBAL_RESET;
}
wifi: ath12k: refactor QMI MLO host capability helper function Currently, QMI MLO host capability parameters are specific to the WCN7850 platform. To make use of this helper function across all the platforms, move the platform specific MLO capability parameter to the HW param configuration. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-2-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
ath12k_host_cap_parse_mlo(ab, &req);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_host_cap_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_HOST_CAP_REQ_V01,
QMI_WLANFW_HOST_CAP_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_host_cap_req_msg_v01_ei, &req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "Failed to send host capability request,err = %d\n", ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0)
goto out;
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "Host capability request failed, result: %d, err: %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
out:
return ret;
}
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
static void ath12k_qmi_phy_cap_send(struct ath12k_base *ab)
{
struct qmi_wlanfw_phy_cap_req_msg_v01 req = {};
struct qmi_wlanfw_phy_cap_resp_msg_v01 resp = {};
struct qmi_txn txn;
int ret;
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_phy_cap_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_PHY_CAP_REQ_V01,
QMI_WLANFW_PHY_CAP_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_phy_cap_req_msg_v01_ei, &req);
if (ret < 0) {
qmi_txn_cancel(&txn);
ath12k_warn(ab, "failed to send phy capability request: %d\n", ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0)
goto out;
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ret = -EOPNOTSUPP;
goto out;
}
wifi: ath12k: set mlo_capable_flags based on QMI PHY capability Currently, mlo_capable_flags is set to zero if dualmac device is detected based on One Time Programmable (OTP) register value. This is not generic and in future dualmac devices may support Single Link Operation (SLO) and Multi Link Operation (MLO). Thus, set mlo_capable_flags based on 'single_chip_mlo_support' parameter from QMI PHY capability response message from the firmware. Also, add check on mlo_capable_flags to disable MLO parameter in the host capability QMI request message. If the firmware does not respond with this optional parameter 'single_chip_mlo_support' in QMI PHY capability response, default ab->mlo_capable_flags is used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-3-quic_rajkbhag@quicinc.com
2024-04-23 12:32:06 +03:00
if (resp.single_chip_mlo_support_valid) {
if (resp.single_chip_mlo_support)
ab->mlo_capable_flags |= ATH12K_INTRA_DEVICE_MLO_SUPPORT;
else
ab->mlo_capable_flags &= ~ATH12K_INTRA_DEVICE_MLO_SUPPORT;
}
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
if (!resp.num_phy_valid) {
ret = -ENODATA;
goto out;
}
ab->qmi.num_radios = resp.num_phy;
wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capability New parameter 'single_chip_mlo_support' was added in QMI PHY capability response message. This is an optional parameter added in QCN9274 firmware. This parameter states if the firmware supports Single-Link Operation (SLO) and Multi-Link Operation (MLO) within the same device. If single_chip_mlo_support = 1, then intra device SLO/MLO is supported in the firmware. If single_chip_mlo_support = 0, then intra device SLO/MLO is not supported in the firmware. Hence, add support to read 'single_chip_mlo_support' parameter from the QMI PHY capability response message. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
2024-04-23 12:32:06 +03:00
ath12k_dbg(ab, ATH12K_DBG_QMI,
"phy capability resp valid %d num_phy %d valid %d board_id %d valid %d single_chip_mlo_support %d\n",
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
resp.num_phy_valid, resp.num_phy,
wifi: ath12k: read single_chip_mlo_support parameter from QMI PHY capability New parameter 'single_chip_mlo_support' was added in QMI PHY capability response message. This is an optional parameter added in QCN9274 firmware. This parameter states if the firmware supports Single-Link Operation (SLO) and Multi-Link Operation (MLO) within the same device. If single_chip_mlo_support = 1, then intra device SLO/MLO is supported in the firmware. If single_chip_mlo_support = 0, then intra device SLO/MLO is not supported in the firmware. Hence, add support to read 'single_chip_mlo_support' parameter from the QMI PHY capability response message. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.1.1-00209-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240418125609.3867730-2-quic_rajkbhag@quicinc.com
2024-04-23 12:32:06 +03:00
resp.board_id_valid, resp.board_id,
resp.single_chip_mlo_support_valid, resp.single_chip_mlo_support);
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
return;
out:
/* If PHY capability not advertised then rely on default num link */
ab->qmi.num_radios = ab->hw_params->def_num_link;
ath12k_dbg(ab, ATH12K_DBG_QMI,
"no valid response from PHY capability, choose default num_phy %d\n",
ab->qmi.num_radios);
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
static int ath12k_qmi_fw_ind_register_send(struct ath12k_base *ab)
{
struct qmi_wlanfw_ind_register_req_msg_v01 *req;
struct qmi_wlanfw_ind_register_resp_msg_v01 *resp;
struct qmi_handle *handle = &ab->qmi.handle;
struct qmi_txn txn;
int ret;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return -ENOMEM;
resp = kzalloc(sizeof(*resp), GFP_KERNEL);
if (!resp) {
ret = -ENOMEM;
goto resp_out;
}
req->client_id_valid = 1;
req->client_id = QMI_WLANFW_CLIENT_ID;
req->fw_ready_enable_valid = 1;
req->fw_ready_enable = 1;
req->request_mem_enable_valid = 1;
req->request_mem_enable = 1;
req->fw_mem_ready_enable_valid = 1;
req->fw_mem_ready_enable = 1;
req->cal_done_enable_valid = 1;
req->cal_done_enable = 1;
req->fw_init_done_enable_valid = 1;
req->fw_init_done_enable = 1;
req->pin_connect_result_enable_valid = 0;
req->pin_connect_result_enable = 0;
ret = qmi_txn_init(handle, &txn,
qmi_wlanfw_ind_register_resp_msg_v01_ei, resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_IND_REGISTER_REQ_V01,
QMI_WLANFW_IND_REGISTER_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_ind_register_req_msg_v01_ei, req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "Failed to send indication register request, err = %d\n",
ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
ath12k_warn(ab, "failed to register fw indication %d\n", ret);
goto out;
}
if (resp->resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "FW Ind register request failed, result: %d, err: %d\n",
resp->resp.result, resp->resp.error);
ret = -EINVAL;
goto out;
}
out:
kfree(resp);
resp_out:
kfree(req);
return ret;
}
static int ath12k_qmi_respond_fw_mem_request(struct ath12k_base *ab)
{
struct qmi_wlanfw_respond_mem_req_msg_v01 *req;
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_respond_mem_resp_msg_v01 resp = {};
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int ret = 0, i;
bool delayed;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return -ENOMEM;
/* Some targets by default request a block of big contiguous
* DMA memory, it's hard to allocate from kernel. So host returns
* failure to firmware and firmware then request multiple blocks of
* small chunk size memory.
*/
if (ab->qmi.target_mem_delayed) {
delayed = true;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi delays mem_request %d\n",
ab->qmi.mem_seg_count);
} else {
delayed = false;
req->mem_seg_len = ab->qmi.mem_seg_count;
for (i = 0; i < req->mem_seg_len ; i++) {
req->mem_seg[i].addr = ab->qmi.target_mem[i].paddr;
req->mem_seg[i].size = ab->qmi.target_mem[i].size;
req->mem_seg[i].type = ab->qmi.target_mem[i].type;
ath12k_dbg(ab, ATH12K_DBG_QMI,
"qmi req mem_seg[%d] %pad %u %u\n", i,
&ab->qmi.target_mem[i].paddr,
ab->qmi.target_mem[i].size,
ab->qmi.target_mem[i].type);
}
}
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_respond_mem_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_RESPOND_MEM_REQ_V01,
QMI_WLANFW_RESPOND_MEM_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_respond_mem_req_msg_v01_ei, req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "qmi failed to respond memory request, err = %d\n",
ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
ath12k_warn(ab, "qmi failed memory request, err = %d\n", ret);
goto out;
}
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
/* the error response is expected when
* target_mem_delayed is true.
*/
if (delayed && resp.resp.error == 0)
goto out;
ath12k_warn(ab, "Respond mem req failed, result: %d, err: %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
out:
kfree(req);
return ret;
}
static void ath12k_qmi_free_target_mem_chunk(struct ath12k_base *ab)
{
int i;
for (i = 0; i < ab->qmi.mem_seg_count; i++) {
if (!ab->qmi.target_mem[i].v.addr)
continue;
wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-22 15:11:47 +03:00
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
dma_free_coherent(ab->dev,
wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-22 15:11:47 +03:00
ab->qmi.target_mem[i].prev_size,
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ab->qmi.target_mem[i].v.addr,
ab->qmi.target_mem[i].paddr);
ab->qmi.target_mem[i].v.addr = NULL;
}
}
static int ath12k_qmi_alloc_target_mem_chunk(struct ath12k_base *ab)
{
int i;
struct target_mem_chunk *chunk;
ab->qmi.target_mem_delayed = false;
for (i = 0; i < ab->qmi.mem_seg_count; i++) {
chunk = &ab->qmi.target_mem[i];
/* Allocate memory for the region and the functionality supported
* on the host. For the non-supported memory region, host does not
* allocate memory, assigns NULL and FW will handle this without crashing.
*/
switch (chunk->type) {
case HOST_DDR_REGION_TYPE:
case M3_DUMP_REGION_TYPE:
case PAGEABLE_MEM_REGION_TYPE:
case CALDB_MEM_REGION_TYPE:
wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-22 15:11:47 +03:00
/* Firmware reloads in recovery/resume.
* In such cases, no need to allocate memory for FW again.
*/
if (chunk->v.addr) {
if (chunk->prev_type == chunk->type &&
chunk->prev_size == chunk->size)
goto this_chunk_done;
/* cannot reuse the existing chunk */
dma_free_coherent(ab->dev, chunk->prev_size,
chunk->v.addr, chunk->paddr);
chunk->v.addr = NULL;
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
chunk->v.addr = dma_alloc_coherent(ab->dev,
chunk->size,
&chunk->paddr,
GFP_KERNEL | __GFP_NOWARN);
if (!chunk->v.addr) {
if (chunk->size > ATH12K_QMI_MAX_CHUNK_SIZE) {
ab->qmi.target_mem_delayed = true;
ath12k_warn(ab,
"qmi dma allocation failed (%d B type %u), will try later with small size\n",
chunk->size,
chunk->type);
ath12k_qmi_free_target_mem_chunk(ab);
return 0;
}
ath12k_warn(ab, "memory allocation failure for %u size: %d\n",
chunk->type, chunk->size);
return -ENOMEM;
}
wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-22 15:11:47 +03:00
chunk->prev_type = chunk->type;
chunk->prev_size = chunk->size;
this_chunk_done:
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
break;
default:
ath12k_warn(ab, "memory type %u not supported\n",
chunk->type);
chunk->paddr = 0;
chunk->v.addr = NULL;
break;
}
}
return 0;
}
static int ath12k_qmi_request_target_cap(struct ath12k_base *ab)
{
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_cap_req_msg_v01 req = {};
struct qmi_wlanfw_cap_resp_msg_v01 resp = {};
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
unsigned int board_id = ATH12K_BOARD_ID_DEFAULT;
int ret = 0;
wifi: ath12k: add read variant from SMBIOS for download board data This is to read variant from SMBIOS such as read from DT, the variant string will be used to one part of string which used to search board data from board-2.bin. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230905105637.10230-1-quic_wgong@quicinc.com
2023-09-30 07:54:51 +03:00
int r;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int i;
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_cap_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_CAP_REQ_V01,
QMI_WLANFW_CAP_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_cap_req_msg_v01_ei, &req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "qmi failed to send target cap request, err = %d\n",
ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
ath12k_warn(ab, "qmi failed target cap request %d\n", ret);
goto out;
}
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "qmi targetcap req failed, result: %d, err: %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
if (resp.chip_info_valid) {
ab->qmi.target.chip_id = resp.chip_info.chip_id;
ab->qmi.target.chip_family = resp.chip_info.chip_family;
}
if (resp.board_info_valid)
ab->qmi.target.board_id = resp.board_info.board_id;
else
ab->qmi.target.board_id = board_id;
if (resp.soc_info_valid)
ab->qmi.target.soc_id = resp.soc_info.soc_id;
if (resp.fw_version_info_valid) {
ab->qmi.target.fw_version = resp.fw_version_info.fw_version;
strscpy(ab->qmi.target.fw_build_timestamp,
resp.fw_version_info.fw_build_timestamp,
sizeof(ab->qmi.target.fw_build_timestamp));
}
if (resp.fw_build_id_valid)
strscpy(ab->qmi.target.fw_build_id, resp.fw_build_id,
sizeof(ab->qmi.target.fw_build_id));
if (resp.dev_mem_info_valid) {
for (i = 0; i < ATH12K_QMI_WLFW_MAX_DEV_MEM_NUM_V01; i++) {
ab->qmi.dev_mem[i].start =
resp.dev_mem[i].start;
ab->qmi.dev_mem[i].size =
resp.dev_mem[i].size;
ath12k_dbg(ab, ATH12K_DBG_QMI,
"devmem [%d] start ox%llx size %llu\n", i,
ab->qmi.dev_mem[i].start,
ab->qmi.dev_mem[i].size);
}
}
if (resp.eeprom_caldata_read_timeout_valid) {
ab->qmi.target.eeprom_caldata = resp.eeprom_caldata_read_timeout;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi cal data supported from eeprom\n");
}
ath12k_info(ab, "chip_id 0x%x chip_family 0x%x board_id 0x%x soc_id 0x%x\n",
ab->qmi.target.chip_id, ab->qmi.target.chip_family,
ab->qmi.target.board_id, ab->qmi.target.soc_id);
ath12k_info(ab, "fw_version 0x%x fw_build_timestamp %s fw_build_id %s",
ab->qmi.target.fw_version,
ab->qmi.target.fw_build_timestamp,
ab->qmi.target.fw_build_id);
wifi: ath12k: add read variant from SMBIOS for download board data This is to read variant from SMBIOS such as read from DT, the variant string will be used to one part of string which used to search board data from board-2.bin. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230905105637.10230-1-quic_wgong@quicinc.com
2023-09-30 07:54:51 +03:00
r = ath12k_core_check_smbios(ab);
if (r)
ath12k_dbg(ab, ATH12K_DBG_QMI, "SMBIOS bdf variant name not set.\n");
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
out:
return ret;
}
static int ath12k_qmi_load_file_target_mem(struct ath12k_base *ab,
const u8 *data, u32 len, u8 type)
{
struct qmi_wlanfw_bdf_download_req_msg_v01 *req;
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_bdf_download_resp_msg_v01 resp = {};
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
const u8 *temp = data;
int ret;
u32 remaining = len;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return -ENOMEM;
while (remaining) {
req->valid = 1;
req->file_id_valid = 1;
req->file_id = ab->qmi.target.board_id;
req->total_size_valid = 1;
req->total_size = remaining;
req->seg_id_valid = 1;
req->data_valid = 1;
req->bdf_type = type;
req->bdf_type_valid = 1;
req->end_valid = 1;
req->end = 0;
if (remaining > QMI_WLANFW_MAX_DATA_SIZE_V01) {
req->data_len = QMI_WLANFW_MAX_DATA_SIZE_V01;
} else {
req->data_len = remaining;
req->end = 1;
}
if (type == ATH12K_QMI_FILE_TYPE_EEPROM) {
req->data_valid = 0;
req->end = 1;
req->data_len = ATH12K_QMI_MAX_BDF_FILE_NAME_SIZE;
} else {
memcpy(req->data, temp, req->data_len);
}
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_bdf_download_resp_msg_v01_ei,
&resp);
if (ret < 0)
goto out;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi bdf download req fixed addr type %d\n",
type);
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_BDF_DOWNLOAD_REQ_V01,
QMI_WLANFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_bdf_download_req_msg_v01_ei, req);
if (ret < 0) {
qmi_txn_cancel(&txn);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0)
goto out;
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "qmi BDF download failed, result: %d, err: %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
wifi: ath12k: Add support to read EEPROM caldata In current implementation, there is a overhead of maintaining caldata in the filesystem manually. To eliminate this overhead, for pci based chipsets, if calibration data is present in EEPROM, indicate firmware to download and read caldata from EEPROM. If the caldata is present in EEPROM, host is notified in the target capability. Upon this, the download request for the type ATH12K_QMI_FILE_TYPE_EEPROM is sent to firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-4-quic_dinek@quicinc.com
2022-12-23 10:36:46 +05:30
if (type == ATH12K_QMI_FILE_TYPE_EEPROM) {
remaining = 0;
} else {
remaining -= req->data_len;
temp += req->data_len;
req->seg_id++;
ath12k_dbg(ab, ATH12K_DBG_QMI,
"qmi bdf download request remaining %i\n",
remaining);
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
}
out:
kfree(req);
return ret;
}
static int ath12k_qmi_load_bdf_qmi(struct ath12k_base *ab,
enum ath12k_qmi_bdf_type type)
{
struct device *dev = ab->dev;
char filename[ATH12K_QMI_MAX_BDF_FILE_NAME_SIZE];
const struct firmware *fw_entry;
struct ath12k_board_data bd;
u32 fw_size, file_type;
int ret = 0;
const u8 *tmp;
memset(&bd, 0, sizeof(bd));
switch (type) {
case ATH12K_QMI_BDF_TYPE_ELF:
ret = ath12k_core_fetch_bdf(ab, &bd);
if (ret) {
ath12k_warn(ab, "qmi failed to load bdf:\n");
goto out;
}
if (bd.len >= SELFMAG && memcmp(bd.data, ELFMAG, SELFMAG) == 0)
type = ATH12K_QMI_BDF_TYPE_ELF;
else
type = ATH12K_QMI_BDF_TYPE_BIN;
break;
case ATH12K_QMI_BDF_TYPE_REGDB:
wifi: ath12k: add support to search regdb data in board-2.bin for WCN7850 Currently ath12k only downloads the same regdb.bin file for all WCN7850 chips, actually ath12k needs to distinguish all different WCN7850 chips. This is to re-use the string type which includes bus, chip id, board id, vendor, device, subsystem-vendor, subsystem-device and variant for WCN7850 to distinguish different regdb in board-2.bin. ath12k will first load board-2.bin and search in it for the regdb data with the above parameters. If matched with one regdb data, download it to firmware. And if not, download regdb.bin instead. Add enum value ATH12K_BD_IE_REGDB and enum type ath12k_bd_ie_regdb_type to distinguish regdb data and board data since they are in the same file board-2.bin. Test log: [ 3833.091948] ath12k_pci 0000:05:00.0: boot using board name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092072] ath12k_pci 0000:05:00.0: boot firmware request ath12k/WCN7850/hw2.0/board-2.bin size 205316 [ 3833.092079] ath12k_pci 0000:05:00.0: board name [ 3833.092083] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092088] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 -id=1 [ 3833.092091] ath12k_pci 0000:05:00.0: board name [ 3833.092095] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092099] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 -id=2 [ 3833.092102] ath12k_pci 0000:05:00.0: board name [ 3833.092105] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092109] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 -id=3 [ 3833.092112] ath12k_pci 0000:05:00.0: board name [ 3833.092116] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092119] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092123] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092126] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092130] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092133] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092137] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 2c 76 61 72 69 61 ard-id=266,varia [ 3833.092140] ath12k_pci 0000:05:00.0: 00000070: 6e 74 3d 48 50 5f 47 38 5f 4c 61 6e 63 69 61 31 nt=HP_G8_Lancia1 [ 3833.092144] ath12k_pci 0000:05:00.0: 00000080: 35 5 [ 3833.092147] ath12k_pci 0000:05:00.0: board name [ 3833.092150] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092154] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092157] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092161] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092165] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092168] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092172] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 36 ard-id=266 [ 3833.092206] ath12k_pci 0000:05:00.0: board name [ 3833.092209] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 76 65 6e 64 6f 72 3d 31 bus=pci,vendor=1 [ 3833.092213] ath12k_pci 0000:05:00.0: 00000010: 37 63 62 2c 64 65 76 69 63 65 3d 31 31 30 33 2c 7cb,device=1103, [ 3833.092216] ath12k_pci 0000:05:00.0: 00000020: 73 75 62 73 79 73 74 65 6d 2d 76 65 6e 64 6f 72 subsystem-vendor [ 3833.092220] ath12k_pci 0000:05:00.0: 00000030: 3d 31 37 63 62 2c 73 75 62 73 79 73 74 65 6d 2d =17cb,subsystem- [ 3833.092223] ath12k_pci 0000:05:00.0: 00000040: 64 65 76 69 63 65 3d 33 33 37 34 2c 71 6d 69 2d device=3374,qmi- [ 3833.092227] ath12k_pci 0000:05:00.0: 00000050: 63 68 69 70 2d 69 64 3d 32 2c 71 6d 69 2d 62 6f chip-id=2,qmi-bo [ 3833.092230] ath12k_pci 0000:05:00.0: 00000060: 61 72 64 2d 69 64 3d 32 36 32 ard-id=262 [ 3833.092234] ath12k_pci 0000:05:00.0: boot found match regdb data for name 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092238] ath12k_pci 0000:05:00.0: board name [ 3833.092241] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092245] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 31 31 -id=11 [ 3833.092248] ath12k_pci 0000:05:00.0: board name [ 3833.092251] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092255] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 32 32 -id=22 [ 3833.092258] ath12k_pci 0000:05:00.0: board name [ 3833.092261] ath12k_pci 0000:05:00.0: 00000000: 62 75 73 3d 70 63 69 2c 71 6d 69 2d 63 68 69 70 bus=pci,qmi-chip [ 3833.092265] ath12k_pci 0000:05:00.0: 00000010: 2d 69 64 3d 33 33 -id=33 [ 3833.092268] ath12k_pci 0000:05:00.0: boot found regdb data for 'bus=pci,vendor=17cb,device=1103,subsystem-vendor=17cb,subsystem-device=3374,qmi-chip-id=2,qmi-board-id=262' [ 3833.092272] ath12k_pci 0000:05:00.0: fetched regdb Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20231216060140.30611-5-quic_bqiang@quicinc.com
2023-12-17 13:29:04 +02:00
ret = ath12k_core_fetch_regdb(ab, &bd);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
if (ret) {
ath12k_warn(ab, "qmi failed to load regdb bin:\n");
goto out;
}
break;
wifi: ath12k: Add new qmi_bdf_type to handle caldata With current implementation, the calibration data download request, is sent twice incorrectly because the request for ELF_TYPE and REGDB_TYPE are handled in a common api ath12k_qmi_load_bdf_qmi. Add new type as ATH12K_QMI_BDF_TYPE_CALIBRATION to send calibration data download request as a separate case. With this the firmware is indicated to read caldata from EEPROM. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-3-quic_dinek@quicinc.com
2022-12-23 10:36:45 +05:30
case ATH12K_QMI_BDF_TYPE_CALIBRATION:
if (ab->qmi.target.eeprom_caldata) {
wifi: ath12k: Add support to read EEPROM caldata In current implementation, there is a overhead of maintaining caldata in the filesystem manually. To eliminate this overhead, for pci based chipsets, if calibration data is present in EEPROM, indicate firmware to download and read caldata from EEPROM. If the caldata is present in EEPROM, host is notified in the target capability. Upon this, the download request for the type ATH12K_QMI_FILE_TYPE_EEPROM is sent to firmware. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-4-quic_dinek@quicinc.com
2022-12-23 10:36:46 +05:30
file_type = ATH12K_QMI_FILE_TYPE_EEPROM;
wifi: ath12k: Add new qmi_bdf_type to handle caldata With current implementation, the calibration data download request, is sent twice incorrectly because the request for ELF_TYPE and REGDB_TYPE are handled in a common api ath12k_qmi_load_bdf_qmi. Add new type as ATH12K_QMI_BDF_TYPE_CALIBRATION to send calibration data download request as a separate case. With this the firmware is indicated to read caldata from EEPROM. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-3-quic_dinek@quicinc.com
2022-12-23 10:36:45 +05:30
tmp = filename;
fw_size = ATH12K_QMI_MAX_BDF_FILE_NAME_SIZE;
} else {
file_type = ATH12K_QMI_FILE_TYPE_CALDATA;
/* cal-<bus>-<id>.bin */
snprintf(filename, sizeof(filename), "cal-%s-%s.bin",
ath12k_bus_str(ab->hif.bus), dev_name(dev));
fw_entry = ath12k_core_firmware_request(ab, filename);
if (!IS_ERR(fw_entry))
goto success;
fw_entry = ath12k_core_firmware_request(ab,
ATH12K_DEFAULT_CAL_FILE);
if (IS_ERR(fw_entry)) {
ret = PTR_ERR(fw_entry);
ath12k_warn(ab,
"qmi failed to load CAL data file:%s\n",
filename);
goto out;
}
success:
fw_size = min_t(u32, ab->hw_params->fw.board_size,
fw_entry->size);
tmp = fw_entry->data;
}
ret = ath12k_qmi_load_file_target_mem(ab, tmp, fw_size, file_type);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to load caldata\n");
goto out_qmi_cal;
}
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi caldata downloaded: type: %u\n",
file_type);
out_qmi_cal:
if (!ab->qmi.target.eeprom_caldata)
release_firmware(fw_entry);
return ret;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
default:
ath12k_warn(ab, "unknown file type for load %d", type);
goto out;
}
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi bdf_type %d\n", type);
fw_size = min_t(u32, ab->hw_params->fw.board_size, bd.len);
ret = ath12k_qmi_load_file_target_mem(ab, bd.data, fw_size, type);
wifi: ath12k: Add new qmi_bdf_type to handle caldata With current implementation, the calibration data download request, is sent twice incorrectly because the request for ELF_TYPE and REGDB_TYPE are handled in a common api ath12k_qmi_load_bdf_qmi. Add new type as ATH12K_QMI_BDF_TYPE_CALIBRATION to send calibration data download request as a separate case. With this the firmware is indicated to read caldata from EEPROM. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-3-quic_dinek@quicinc.com
2022-12-23 10:36:45 +05:30
if (ret < 0)
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "qmi failed to load bdf file\n");
out:
ath12k_core_free_bdf(ab, &bd);
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi BDF download sequence completed\n");
return ret;
}
wifi: ath12k: check M3 buffer size as well whey trying to reuse it Currently in recovery/resume cases, we do not free M3 buffer but instead will reuse it. This is done by checking m3_mem->vaddr: if it is not NULL we believe M3 buffer is ready and go ahead to reuse it. Note that m3_mem->size is not checked. This is safe for now because currently M3 reuse logic only gets executed in recovery/resume cases and the size keeps unchanged in either of them. However ideally the size should be checked as well, to make the code safer. So add the check there. Now if that check fails, free old M3 buffer and reallocate a new one. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 303c017821d8 ("wifi: ath12k: fix kernel crash during resume") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425021740.29221-1-quic_bqiang@quicinc.com
2024-04-25 10:17:40 +08:00
static void ath12k_qmi_m3_free(struct ath12k_base *ab)
{
struct m3_mem_region *m3_mem = &ab->qmi.m3_mem;
if (!m3_mem->vaddr)
return;
dma_free_coherent(ab->dev, m3_mem->size,
m3_mem->vaddr, m3_mem->paddr);
m3_mem->vaddr = NULL;
m3_mem->size = 0;
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
static int ath12k_qmi_m3_load(struct ath12k_base *ab)
{
struct m3_mem_region *m3_mem = &ab->qmi.m3_mem;
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
const struct firmware *fw = NULL;
const void *m3_data;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
char path[100];
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
size_t m3_len;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int ret;
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
if (ab->fw.m3_data && ab->fw.m3_len > 0) {
/* firmware-N.bin had a m3 firmware file so use that */
m3_data = ab->fw.m3_data;
m3_len = ab->fw.m3_len;
} else {
/* No m3 file in firmware-N.bin so try to request old
* separate m3.bin.
*/
fw = ath12k_core_firmware_request(ab, ATH12K_M3_FILE);
if (IS_ERR(fw)) {
ret = PTR_ERR(fw);
ath12k_core_create_firmware_path(ab, ATH12K_M3_FILE,
path, sizeof(path));
ath12k_err(ab, "failed to load %s: %d\n", path, ret);
return ret;
}
m3_data = fw->data;
m3_len = fw->size;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
}
wifi: ath12k: check M3 buffer size as well whey trying to reuse it Currently in recovery/resume cases, we do not free M3 buffer but instead will reuse it. This is done by checking m3_mem->vaddr: if it is not NULL we believe M3 buffer is ready and go ahead to reuse it. Note that m3_mem->size is not checked. This is safe for now because currently M3 reuse logic only gets executed in recovery/resume cases and the size keeps unchanged in either of them. However ideally the size should be checked as well, to make the code safer. So add the check there. Now if that check fails, free old M3 buffer and reallocate a new one. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30 Fixes: 303c017821d8 ("wifi: ath12k: fix kernel crash during resume") Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240425021740.29221-1-quic_bqiang@quicinc.com
2024-04-25 10:17:40 +08:00
/* In recovery/resume cases, M3 buffer is not freed, try to reuse that */
if (m3_mem->vaddr) {
if (m3_mem->size >= m3_len)
goto skip_m3_alloc;
/* Old buffer is too small, free and reallocate */
ath12k_qmi_m3_free(ab);
}
wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-22 15:11:47 +03:00
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
m3_mem->vaddr = dma_alloc_coherent(ab->dev,
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
m3_len, &m3_mem->paddr,
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
GFP_KERNEL);
if (!m3_mem->vaddr) {
ath12k_err(ab, "failed to allocate memory for M3 with size %zu\n",
fw->size);
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
ret = -ENOMEM;
goto out;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
}
wifi: ath12k: fix kernel crash during resume Currently during resume, QMI target memory is not properly handled, resulting in kernel crash in case DMA remap is not supported: BUG: Bad page state in process kworker/u16:54 pfn:36e80 page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x36e80 page dumped because: nonzero _refcount Call Trace: bad_page free_page_is_bad_report __free_pages_ok __free_pages dma_direct_free dma_free_attrs ath12k_qmi_free_target_mem_chunk ath12k_qmi_msg_mem_request_cb The reason is: Once ath12k module is loaded, firmware sends memory request to host. In case DMA remap not supported, ath12k refuses the first request due to failure in allocating with large segment size: ath12k_pci 0000:04:00.0: qmi firmware request memory request ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 7077888 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 8454144 ath12k_pci 0000:04:00.0: qmi dma allocation failed (7077888 B type 1), will try later with small size ath12k_pci 0000:04:00.0: qmi delays mem_request 2 ath12k_pci 0000:04:00.0: qmi firmware request memory request Later firmware comes back with more but small segments and allocation succeeds: ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 262144 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 524288 ath12k_pci 0000:04:00.0: qmi mem seg type 4 size 65536 ath12k_pci 0000:04:00.0: qmi mem seg type 1 size 524288 Now ath12k is working. If suspend is triggered, firmware will be reloaded during resume. As same as before, firmware requests two large segments at first. In ath12k_qmi_msg_mem_request_cb() segment count and size are assigned: ab->qmi.mem_seg_count == 2 ab->qmi.target_mem[0].size == 7077888 ab->qmi.target_mem[1].size == 8454144 Then allocation failed like before and ath12k_qmi_free_target_mem_chunk() is called to free all allocated segments. Note the first segment is skipped because its v.addr is cleared due to allocation failure: chunk->v.addr = dma_alloc_coherent() Also note that this leaks that segment because it has not been freed. While freeing the second segment, a size of 8454144 is passed to dma_free_coherent(). However remember that this segment is allocated at the first time firmware is loaded, before suspend. So its real size is 524288, much smaller than 8454144. As a result kernel found we are freeing some memory which is in use and thus crashed. So one possible fix would be to free those segments during suspend. This works because with them freed, ath12k_qmi_free_target_mem_chunk() does nothing: all segment addresses are NULL so dma_free_coherent() is not called. But note that ath11k has similar logic but never hits this issue. Reviewing code there shows the luck comes from QMI memory reuse logic. So the decision is to port it to ath12k. Like in ath11k, the crash is avoided by adding prev_size to target_mem_chunk structure and caching real segment size in it, then prev_size instead of current size is passed to dma_free_coherent(), no unexpected memory is freed now. Also reuse m3 buffer. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240419034034.2842-1-quic_bqiang@quicinc.com
2024-04-22 15:11:47 +03:00
skip_m3_alloc:
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
memcpy(m3_mem->vaddr, m3_data, m3_len);
m3_mem->size = m3_len;
ret = 0;
out:
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
release_firmware(fw);
wifi: ath12k: add firmware-2.bin support Firmware IE containers can dynamically provide various information what firmware supports. Also it can embed more than one image so updating firmware is easy, user just needs to update one file in /lib/firmware/. The firmware API 2 or higher will use the IE container format, the current API 1 will not use the new format but it still is supported for some time. Firmware API 2 files are named as firmware-2.bin (which contains both amss.bin and m3.bin images) and API 1 files are amss.bin and m3.bin. Currently ath12k PCI driver provides firmware binary (amss.bin) path to MHI driver, MHI driver reads firmware from filesystem and boots it. Add provision to read firmware files from ath12k driver and provide the amss.bin firmware data and size to MHI using a pointer. Currently enum ath12k_fw_features is empty, the patches adding features will add the flags. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240123122812.3811251-1-quic_rajkbhag@quicinc.com
2024-01-23 17:58:12 +05:30
return ret;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
}
static int ath12k_qmi_wlanfw_m3_info_send(struct ath12k_base *ab)
{
struct m3_mem_region *m3_mem = &ab->qmi.m3_mem;
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_m3_info_req_msg_v01 req = {};
struct qmi_wlanfw_m3_info_resp_msg_v01 resp = {};
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int ret = 0;
ret = ath12k_qmi_m3_load(ab);
if (ret) {
ath12k_err(ab, "failed to load m3 firmware: %d", ret);
return ret;
}
req.addr = m3_mem->paddr;
req.size = m3_mem->size;
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_m3_info_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_M3_INFO_REQ_V01,
QMI_WLANFW_M3_INFO_REQ_MSG_V01_MAX_MSG_LEN,
qmi_wlanfw_m3_info_req_msg_v01_ei, &req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "qmi failed to send M3 information request, err = %d\n",
ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
ath12k_warn(ab, "qmi failed M3 information request %d\n", ret);
goto out;
}
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "qmi M3 info request failed, result: %d, err: %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
out:
return ret;
}
static int ath12k_qmi_wlanfw_mode_send(struct ath12k_base *ab,
u32 mode)
{
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_wlan_mode_req_msg_v01 req = {};
struct qmi_wlanfw_wlan_mode_resp_msg_v01 resp = {};
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int ret = 0;
req.mode = mode;
req.hw_debug_valid = 1;
req.hw_debug = 0;
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_wlan_mode_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_WLAN_MODE_REQ_V01,
QMI_WLANFW_WLAN_MODE_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_wlan_mode_req_msg_v01_ei, &req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "qmi failed to send mode request, mode: %d, err = %d\n",
mode, ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
if (mode == ATH12K_FIRMWARE_MODE_OFF && ret == -ENETRESET) {
ath12k_warn(ab, "WLFW service is dis-connected\n");
return 0;
}
ath12k_warn(ab, "qmi failed set mode request, mode: %d, err = %d\n",
mode, ret);
goto out;
}
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "Mode request failed, mode: %d, result: %d err: %d\n",
mode, resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
out:
return ret;
}
static int ath12k_qmi_wlanfw_wlan_cfg_send(struct ath12k_base *ab)
{
struct qmi_wlanfw_wlan_cfg_req_msg_v01 *req;
wifi: ath12k: Use initializers for QMI message buffers Currently most of the QMI messaging functions use memset() to zero out the QMI message buffers. Prefer to use a {} initializer to allow the compiler to generate optimized code and avoid the function call overhead. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-3-53343af953d5@quicinc.com
2024-01-11 10:05:32 -08:00
struct qmi_wlanfw_wlan_cfg_resp_msg_v01 resp = {};
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
struct ce_pipe_config *ce_cfg;
struct service_to_pipe *svc_cfg;
wifi: ath12k: Remove unnecessary struct qmi_txn initializers Currently most of the ath12k QMI messaging functions define their struct qmi_txn variables with a {} initializer. However, all of these functions subsequently call qmi_txn_init(), and the very first thing that function does is zero the struct. Hence, the initializers are unnecessary. Since these consume code space and cpu cycles, remove them. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-1-53343af953d5@quicinc.com
2024-01-11 10:05:30 -08:00
struct qmi_txn txn;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
int ret = 0, pipe_num;
ce_cfg = (struct ce_pipe_config *)ab->qmi.ce_cfg.tgt_ce;
svc_cfg = (struct service_to_pipe *)ab->qmi.ce_cfg.svc_to_ce_map;
req = kzalloc(sizeof(*req), GFP_KERNEL);
if (!req)
return -ENOMEM;
req->host_version_valid = 1;
strscpy(req->host_version, ATH12K_HOST_VERSION_STRING,
sizeof(req->host_version));
req->tgt_cfg_valid = 1;
/* This is number of CE configs */
req->tgt_cfg_len = ab->qmi.ce_cfg.tgt_ce_len;
for (pipe_num = 0; pipe_num < req->tgt_cfg_len ; pipe_num++) {
req->tgt_cfg[pipe_num].pipe_num = ce_cfg[pipe_num].pipenum;
req->tgt_cfg[pipe_num].pipe_dir = ce_cfg[pipe_num].pipedir;
req->tgt_cfg[pipe_num].nentries = ce_cfg[pipe_num].nentries;
req->tgt_cfg[pipe_num].nbytes_max = ce_cfg[pipe_num].nbytes_max;
req->tgt_cfg[pipe_num].flags = ce_cfg[pipe_num].flags;
}
req->svc_cfg_valid = 1;
/* This is number of Service/CE configs */
req->svc_cfg_len = ab->qmi.ce_cfg.svc_to_ce_map_len;
for (pipe_num = 0; pipe_num < req->svc_cfg_len; pipe_num++) {
req->svc_cfg[pipe_num].service_id = svc_cfg[pipe_num].service_id;
req->svc_cfg[pipe_num].pipe_dir = svc_cfg[pipe_num].pipedir;
req->svc_cfg[pipe_num].pipe_num = svc_cfg[pipe_num].pipenum;
}
/* set shadow v3 configuration */
if (ab->hw_params->supports_shadow_regs) {
req->shadow_reg_v3_valid = 1;
req->shadow_reg_v3_len = min_t(u32,
ab->qmi.ce_cfg.shadow_reg_v3_len,
QMI_WLANFW_MAX_NUM_SHADOW_REG_V3_V01);
memcpy(&req->shadow_reg_v3, ab->qmi.ce_cfg.shadow_reg_v3,
sizeof(u32) * req->shadow_reg_v3_len);
} else {
req->shadow_reg_v3_valid = 0;
}
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_wlan_cfg_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
QMI_WLANFW_WLAN_CFG_REQ_V01,
QMI_WLANFW_WLAN_CFG_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_wlan_cfg_req_msg_v01_ei, req);
if (ret < 0) {
wifi: ath12k: Add missing qmi_txn_cancel() calls Per the QMI documentation "A client calling qmi_txn_init() must call either qmi_txn_wait() or qmi_txn_cancel() to free up the allocated resources." Unfortunately, in most of the ath12k messaging functions, when qmi_send_request() fails, the function returns without performing the necessary cleanup. So update those functions to call qmi_txn_cancel() when qmi_send_request() fails. No functional changes, compile tested only. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240111-qmi-cleanup-v2-2-53343af953d5@quicinc.com
2024-01-11 10:05:31 -08:00
qmi_txn_cancel(&txn);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ath12k_warn(ab, "qmi failed to send wlan config request, err = %d\n",
ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
ath12k_warn(ab, "qmi failed wlan config request, err = %d\n", ret);
goto out;
}
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "qmi wlan config request failed, result: %d, err: %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
out:
kfree(req);
return ret;
}
wifi: ath12k: add support for collecting firmware log Currently there is no way to collect firmware log because firmware does not send it to host. Also host does not handle WMI_DIAG_EVENTID which is used by firmware to upload firmware log. So add support for it by firstly enabling firmware log upload via a QMI message, and secondly processing WMI DIAG event to expose it to userspace via trace event. This change applies to both WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240115023726.2866-1-quic_bqiang@quicinc.com
2024-01-18 07:53:48 +02:00
static int ath12k_qmi_wlanfw_wlan_ini_send(struct ath12k_base *ab)
{
struct qmi_wlanfw_wlan_ini_resp_msg_v01 resp = {};
struct qmi_wlanfw_wlan_ini_req_msg_v01 req = {};
struct qmi_txn txn;
int ret;
req.enable_fwlog_valid = true;
req.enable_fwlog = 1;
ret = qmi_txn_init(&ab->qmi.handle, &txn,
qmi_wlanfw_wlan_ini_resp_msg_v01_ei, &resp);
if (ret < 0)
goto out;
ret = qmi_send_request(&ab->qmi.handle, NULL, &txn,
ATH12K_QMI_WLANFW_WLAN_INI_REQ_V01,
QMI_WLANFW_WLAN_INI_REQ_MSG_V01_MAX_LEN,
qmi_wlanfw_wlan_ini_req_msg_v01_ei, &req);
if (ret < 0) {
qmi_txn_cancel(&txn);
ath12k_warn(ab, "failed to send QMI wlan ini request: %d\n",
ret);
goto out;
}
ret = qmi_txn_wait(&txn, msecs_to_jiffies(ATH12K_QMI_WLANFW_TIMEOUT_MS));
if (ret < 0) {
ath12k_warn(ab, "failed to receive QMI wlan ini request: %d\n", ret);
goto out;
}
if (resp.resp.result != QMI_RESULT_SUCCESS_V01) {
ath12k_warn(ab, "QMI wlan ini response failure: %d %d\n",
resp.resp.result, resp.resp.error);
ret = -EINVAL;
goto out;
}
out:
return ret;
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
void ath12k_qmi_firmware_stop(struct ath12k_base *ab)
{
int ret;
ret = ath12k_qmi_wlanfw_mode_send(ab, ATH12K_FIRMWARE_MODE_OFF);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send wlan mode off\n");
return;
}
}
int ath12k_qmi_firmware_start(struct ath12k_base *ab,
u32 mode)
{
int ret;
wifi: ath12k: add support for collecting firmware log Currently there is no way to collect firmware log because firmware does not send it to host. Also host does not handle WMI_DIAG_EVENTID which is used by firmware to upload firmware log. So add support for it by firstly enabling firmware log upload via a QMI message, and secondly processing WMI DIAG event to expose it to userspace via trace event. This change applies to both WCN7850 and QCN9274. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240115023726.2866-1-quic_bqiang@quicinc.com
2024-01-18 07:53:48 +02:00
ret = ath12k_qmi_wlanfw_wlan_ini_send(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send wlan fw ini: %d\n", ret);
return ret;
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ret = ath12k_qmi_wlanfw_wlan_cfg_send(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send wlan cfg:%d\n", ret);
return ret;
}
ret = ath12k_qmi_wlanfw_mode_send(ab, mode);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send wlan fw mode:%d\n", ret);
return ret;
}
return 0;
}
static int
ath12k_qmi_driver_event_post(struct ath12k_qmi *qmi,
enum ath12k_qmi_event_type type,
void *data)
{
struct ath12k_qmi_driver_event *event;
event = kzalloc(sizeof(*event), GFP_ATOMIC);
if (!event)
return -ENOMEM;
event->type = type;
event->data = data;
spin_lock(&qmi->event_lock);
list_add_tail(&event->list, &qmi->event_list);
spin_unlock(&qmi->event_lock);
queue_work(qmi->event_wq, &qmi->event_work);
return 0;
}
static int ath12k_qmi_event_server_arrive(struct ath12k_qmi *qmi)
{
struct ath12k_base *ab = qmi->ab;
int ret;
wifi: ath12k: add QMI PHY capability learn support Currently, the number of PHY is learned from the firmware service ready event message. However, on the QCN9274 platform, number of PHY is a variable parameter. To enable MLO capability in the QMI host capability request message, the driver needs the PHY count information earlier than the firmware service ready event. Therefore, a new QMI message, "PHY capability message", is introduced to retrieve this information. This message allows the driver to fill in the MLO parameter in the QMI host capability request message. If the new QMI PHY capability message fails, the default configuration in the HW params will be used. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240113001659.1022465-3-quic_periyasa@quicinc.com
2024-01-16 14:33:07 +02:00
ath12k_qmi_phy_cap_send(ab);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ret = ath12k_qmi_fw_ind_register_send(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send FW indication QMI:%d\n", ret);
return ret;
}
ret = ath12k_qmi_host_cap_send(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send host cap QMI:%d\n", ret);
return ret;
}
return ret;
}
static int ath12k_qmi_event_mem_request(struct ath12k_qmi *qmi)
{
struct ath12k_base *ab = qmi->ab;
int ret;
ret = ath12k_qmi_respond_fw_mem_request(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to respond fw mem req:%d\n", ret);
return ret;
}
return ret;
}
static int ath12k_qmi_event_load_bdf(struct ath12k_qmi *qmi)
{
struct ath12k_base *ab = qmi->ab;
int ret;
ret = ath12k_qmi_request_target_cap(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to req target capabilities:%d\n", ret);
return ret;
}
ret = ath12k_qmi_load_bdf_qmi(ab, ATH12K_QMI_BDF_TYPE_REGDB);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to load regdb file:%d\n", ret);
return ret;
}
ret = ath12k_qmi_load_bdf_qmi(ab, ATH12K_QMI_BDF_TYPE_ELF);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to load board data file:%d\n", ret);
return ret;
}
wifi: ath12k: Add new qmi_bdf_type to handle caldata With current implementation, the calibration data download request, is sent twice incorrectly because the request for ELF_TYPE and REGDB_TYPE are handled in a common api ath12k_qmi_load_bdf_qmi. Add new type as ATH12K_QMI_BDF_TYPE_CALIBRATION to send calibration data download request as a separate case. With this the firmware is indicated to read caldata from EEPROM. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Dinesh Karthikeyan <quic_dinek@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20221223050646.27785-3-quic_dinek@quicinc.com
2022-12-23 10:36:45 +05:30
if (ab->hw_params->download_calib) {
ret = ath12k_qmi_load_bdf_qmi(ab, ATH12K_QMI_BDF_TYPE_CALIBRATION);
if (ret < 0)
ath12k_warn(ab, "qmi failed to load calibrated data :%d\n", ret);
}
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
ret = ath12k_qmi_wlanfw_m3_info_send(ab);
if (ret < 0) {
ath12k_warn(ab, "qmi failed to send m3 info req:%d\n", ret);
return ret;
}
return ret;
}
static void ath12k_qmi_msg_mem_request_cb(struct qmi_handle *qmi_hdl,
struct sockaddr_qrtr *sq,
struct qmi_txn *txn,
const void *data)
{
struct ath12k_qmi *qmi = container_of(qmi_hdl, struct ath12k_qmi, handle);
struct ath12k_base *ab = qmi->ab;
const struct qmi_wlanfw_request_mem_ind_msg_v01 *msg = data;
int i, ret;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi firmware request memory request\n");
if (msg->mem_seg_len == 0 ||
msg->mem_seg_len > ATH12K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01)
ath12k_warn(ab, "Invalid memory segment length: %u\n",
msg->mem_seg_len);
ab->qmi.mem_seg_count = msg->mem_seg_len;
for (i = 0; i < qmi->mem_seg_count ; i++) {
ab->qmi.target_mem[i].type = msg->mem_seg[i].type;
ab->qmi.target_mem[i].size = msg->mem_seg[i].size;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi mem seg type %d size %d\n",
msg->mem_seg[i].type, msg->mem_seg[i].size);
}
ret = ath12k_qmi_alloc_target_mem_chunk(ab);
if (ret) {
ath12k_warn(ab, "qmi failed to alloc target memory: %d\n",
ret);
return;
}
ath12k_qmi_driver_event_post(qmi, ATH12K_QMI_EVENT_REQUEST_MEM, NULL);
}
static void ath12k_qmi_msg_mem_ready_cb(struct qmi_handle *qmi_hdl,
struct sockaddr_qrtr *sq,
struct qmi_txn *txn,
const void *decoded)
{
struct ath12k_qmi *qmi = container_of(qmi_hdl, struct ath12k_qmi, handle);
struct ath12k_base *ab = qmi->ab;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi firmware memory ready indication\n");
ath12k_qmi_driver_event_post(qmi, ATH12K_QMI_EVENT_FW_MEM_READY, NULL);
}
static void ath12k_qmi_msg_fw_ready_cb(struct qmi_handle *qmi_hdl,
struct sockaddr_qrtr *sq,
struct qmi_txn *txn,
const void *decoded)
{
struct ath12k_qmi *qmi = container_of(qmi_hdl, struct ath12k_qmi, handle);
struct ath12k_base *ab = qmi->ab;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi firmware ready\n");
ath12k_qmi_driver_event_post(qmi, ATH12K_QMI_EVENT_FW_READY, NULL);
}
static const struct qmi_msg_handler ath12k_qmi_msg_handlers[] = {
{
.type = QMI_INDICATION,
.msg_id = QMI_WLFW_REQUEST_MEM_IND_V01,
.ei = qmi_wlanfw_request_mem_ind_msg_v01_ei,
.decoded_size = sizeof(struct qmi_wlanfw_request_mem_ind_msg_v01),
.fn = ath12k_qmi_msg_mem_request_cb,
},
{
.type = QMI_INDICATION,
.msg_id = QMI_WLFW_FW_MEM_READY_IND_V01,
.ei = qmi_wlanfw_mem_ready_ind_msg_v01_ei,
.decoded_size = sizeof(struct qmi_wlanfw_fw_mem_ready_ind_msg_v01),
.fn = ath12k_qmi_msg_mem_ready_cb,
},
{
.type = QMI_INDICATION,
.msg_id = QMI_WLFW_FW_READY_IND_V01,
.ei = qmi_wlanfw_fw_ready_ind_msg_v01_ei,
.decoded_size = sizeof(struct qmi_wlanfw_fw_ready_ind_msg_v01),
.fn = ath12k_qmi_msg_fw_ready_cb,
},
wifi: ath12k: fix out-of-bound access of qmi_invoke_handler() Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence facing below KASAN warning, ================================================================== BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148 Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273 CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0 Workqueue: qmi_msg_handler qmi_data_ready_work Call trace: dump_backtrace+0x0/0x20c show_stack+0x14/0x1c dump_stack+0xe0/0x138 print_address_description.isra.5+0x30/0x330 __kasan_report+0x16c/0x1bc kasan_report+0xc/0x14 __asan_load8+0xa8/0xb0 qmi_invoke_handler+0xa4/0x148 qmi_handle_message+0x18c/0x1bc qmi_data_ready_work+0x4ec/0x528 process_one_work+0x2c0/0x440 worker_thread+0x324/0x4b8 kthread+0x210/0x228 ret_from_fork+0x10/0x18 The address belongs to the variable: ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k] [...] ================================================================== Add a dummy terminator entry at the end to assist the qmi_invoke_handler() in traversing up to the terminator entry without accessing an out-of-boundary index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240416080234.2882725-1-quic_kathirve@quicinc.com
2024-04-18 18:30:25 +03:00
/* end of list */
{},
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
};
static int ath12k_qmi_ops_new_server(struct qmi_handle *qmi_hdl,
struct qmi_service *service)
{
struct ath12k_qmi *qmi = container_of(qmi_hdl, struct ath12k_qmi, handle);
struct ath12k_base *ab = qmi->ab;
struct sockaddr_qrtr *sq = &qmi->sq;
int ret;
sq->sq_family = AF_QIPCRTR;
sq->sq_node = service->node;
sq->sq_port = service->port;
ret = kernel_connect(qmi_hdl->sock, (struct sockaddr *)sq,
sizeof(*sq), 0);
if (ret) {
ath12k_warn(ab, "qmi failed to connect to remote service %d\n", ret);
return ret;
}
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi wifi fw qmi service connected\n");
ath12k_qmi_driver_event_post(qmi, ATH12K_QMI_EVENT_SERVER_ARRIVE, NULL);
return ret;
}
static void ath12k_qmi_ops_del_server(struct qmi_handle *qmi_hdl,
struct qmi_service *service)
{
struct ath12k_qmi *qmi = container_of(qmi_hdl, struct ath12k_qmi, handle);
struct ath12k_base *ab = qmi->ab;
ath12k_dbg(ab, ATH12K_DBG_QMI, "qmi wifi fw del server\n");
ath12k_qmi_driver_event_post(qmi, ATH12K_QMI_EVENT_SERVER_EXIT, NULL);
}
static const struct qmi_ops ath12k_qmi_ops = {
.new_server = ath12k_qmi_ops_new_server,
.del_server = ath12k_qmi_ops_del_server,
};
static void ath12k_qmi_driver_event_work(struct work_struct *work)
{
struct ath12k_qmi *qmi = container_of(work, struct ath12k_qmi,
event_work);
struct ath12k_qmi_driver_event *event;
struct ath12k_base *ab = qmi->ab;
int ret;
spin_lock(&qmi->event_lock);
while (!list_empty(&qmi->event_list)) {
event = list_first_entry(&qmi->event_list,
struct ath12k_qmi_driver_event, list);
list_del(&event->list);
spin_unlock(&qmi->event_lock);
if (test_bit(ATH12K_FLAG_UNREGISTERING, &ab->dev_flags))
wifi: ath12k: fix memory leak in ath12k_qmi_driver_event_work() Currently the buffer pointed by event is not freed in case ATH12K_FLAG_UNREGISTERING bit is set, this causes memory leak. Add a goto skip instead of return, to ensure event and all the list entries are freed properly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230315090632.15065-1-quic_rajson@quicinc.com
2023-03-15 14:36:32 +05:30
goto skip;
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
switch (event->type) {
case ATH12K_QMI_EVENT_SERVER_ARRIVE:
ret = ath12k_qmi_event_server_arrive(qmi);
if (ret < 0)
set_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags);
break;
case ATH12K_QMI_EVENT_SERVER_EXIT:
set_bit(ATH12K_FLAG_CRASH_FLUSH, &ab->dev_flags);
set_bit(ATH12K_FLAG_RECOVERY, &ab->dev_flags);
break;
case ATH12K_QMI_EVENT_REQUEST_MEM:
ret = ath12k_qmi_event_mem_request(qmi);
if (ret < 0)
set_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags);
break;
case ATH12K_QMI_EVENT_FW_MEM_READY:
ret = ath12k_qmi_event_load_bdf(qmi);
if (ret < 0)
set_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags);
break;
case ATH12K_QMI_EVENT_FW_READY:
clear_bit(ATH12K_FLAG_QMI_FAIL, &ab->dev_flags);
if (test_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags)) {
wifi: ath12k: do not dump SRNG statistics during resume Both the firmware reset feature and the power management suspend/resume feature share common power-down and power-up functionality. One aspect of the power-up functionality is the handling of the ATH12K_QMI_EVENT_FW_INIT_DONE event. When this event is received, a call is made to ath12k_hal_dump_srng_stats(), with the purpose to collect information that may be useful in debugging the cause of a firmware reset. Unfortunately, since this functionality is shared between both the firmware reset path and the power management resume path, the kernel log is flooded with messages during resume. Since these messages are not useful during resume, and in fact can be confusing and can increase the time it takes to resume, update the logic to only call ath12k_hal_dump_srng_stats() during firmware reset. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://msgid.link/20240412060620.27519-4-quic_bqiang@quicinc.com
2024-04-22 15:11:44 +03:00
if (ab->is_reset)
ath12k_hal_dump_srng_stats(ab);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
queue_work(ab->workqueue, &ab->restart_work);
break;
}
clear_bit(ATH12K_FLAG_CRASH_FLUSH,
&ab->dev_flags);
clear_bit(ATH12K_FLAG_RECOVERY, &ab->dev_flags);
ath12k_core_qmi_firmware_ready(ab);
set_bit(ATH12K_FLAG_REGISTERED, &ab->dev_flags);
break;
default:
ath12k_warn(ab, "invalid event type: %d", event->type);
break;
}
wifi: ath12k: fix memory leak in ath12k_qmi_driver_event_work() Currently the buffer pointed by event is not freed in case ATH12K_FLAG_UNREGISTERING bit is set, this causes memory leak. Add a goto skip instead of return, to ensure event and all the list entries are freed properly. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 Signed-off-by: Rajat Soni <quic_rajson@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230315090632.15065-1-quic_rajson@quicinc.com
2023-03-15 14:36:32 +05:30
skip:
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
kfree(event);
spin_lock(&qmi->event_lock);
}
spin_unlock(&qmi->event_lock);
}
int ath12k_qmi_init_service(struct ath12k_base *ab)
{
int ret;
memset(&ab->qmi.target, 0, sizeof(struct target_info));
memset(&ab->qmi.target_mem, 0, sizeof(struct target_mem_chunk));
ab->qmi.ab = ab;
ab->qmi.target_mem_mode = ATH12K_QMI_TARGET_MEM_MODE_DEFAULT;
ret = qmi_handle_init(&ab->qmi.handle, ATH12K_QMI_RESP_LEN_MAX,
&ath12k_qmi_ops, ath12k_qmi_msg_handlers);
if (ret < 0) {
ath12k_warn(ab, "failed to initialize qmi handle\n");
return ret;
}
wifi: ath10/11/12k: Use alloc_ordered_workqueue() to create ordered workqueues BACKGROUND ========== When multiple work items are queued to a workqueue, their execution order doesn't match the queueing order. They may get executed in any order and simultaneously. When fully serialized execution - one by one in the queueing order - is needed, an ordered workqueue should be used which can be created with alloc_ordered_workqueue(). However, alloc_ordered_workqueue() was a later addition. Before it, an ordered workqueue could be obtained by creating an UNBOUND workqueue with @max_active==1. This originally was an implementation side-effect which was broken by 4c16bd327c74 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered"). Because there were users that depended on the ordered execution, 5c0338c68706 ("workqueue: restore WQ_UNBOUND/max_active==1 to be ordered") made workqueue allocation path to implicitly promote UNBOUND workqueues w/ @max_active==1 to ordered workqueues. While this has worked okay, overloading the UNBOUND allocation interface this way creates other issues. It's difficult to tell whether a given workqueue actually needs to be ordered and users that legitimately want a min concurrency level wq unexpectedly gets an ordered one instead. With planned UNBOUND workqueue updates to improve execution locality and more prevalence of chiplet designs which can benefit from such improvements, this isn't a state we wanna be in forever. This patch series audits all callsites that create an UNBOUND workqueue w/ @max_active==1 and converts them to alloc_ordered_workqueue() as necessary. WHAT TO LOOK FOR ================ The conversions are from alloc_workqueue(WQ_UNBOUND | flags, 1, args..) to alloc_ordered_workqueue(flags, args...) which don't cause any functional changes. If you know that fully ordered execution is not ncessary, please let me know. I'll drop the conversion and instead add a comment noting the fact to reduce confusion while conversion is in progress. If you aren't fully sure, it's completely fine to let the conversion through. The behavior will stay exactly the same and we can always reconsider later. As there are follow-up workqueue core changes, I'd really appreciate if the patch can be routed through the workqueue tree w/ your acks. Thanks. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Kalle Valo <kvalo@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
2023-05-18 14:40:29 -10:00
ab->qmi.event_wq = alloc_ordered_workqueue("ath12k_qmi_driver_event", 0);
wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices ath12k is a new mac80211 driver for Qualcomm Wi-Fi 7 devices, first supporting QCN9274 and WCN7850 PCI devices. QCN9274 supports both AP and station; WCN7850 supports only station mode. Monitor mode is not (yet) supported. Only PCI bus devices are supported. ath12k is forked from an earlier version of ath11k. It was simpler to have a "clean start" for the new generation and not try to share the code with ath11k. This makes maintenance easier and avoids major changes in ath11k, which would have significantly increased the risk of regressions in existing setups. ath12k uses le32 and cpu_to_le32() macros to handle endian conversions, instead of using the firmware byte swap feature utilized by ath11k. There is only one kernel module, named ath12k.ko. Currently ath12k only supports HE mode (IEEE 802.11ax) or older, but work is ongoing to add EHT mode (IEEE 802.11be) support. The size of the driver is ~41 kLOC and 45 files. To make the review easier, this initial version of ath12k does not support Device Tree, debugfs or any other extra features. Those will be added later, after ath12k is accepted to upstream. The driver is build tested by Intel's kernel test robot with both GCC and Clang. Sparse reports no warnings. The driver is mostly free of checkpatch warnings, albeit few of the warnings are omitted on purpose, list of them here: https://github.com/qca/qca-swiss-army-knife/blob/master/tools/scripts/ath12k/ath12k-check#L52 The driver has had multiple authors who are listed in alphabetical order below. Co-developed-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Signed-off-by: Balamurugan Selvarajan <quic_bselvara@quicinc.com> Co-developed-by: Baochen Qiang <quic_bqiang@quicinc.com> Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com> Co-developed-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Signed-off-by: Bhagavathi Perumal S <quic_bperumal@quicinc.com> Co-developed-by: Carl Huang <quic_cjhuang@quicinc.com> Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com> Co-developed-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Co-developed-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com> Co-developed-by: P Praneesh <quic_ppranees@quicinc.com> Signed-off-by: P Praneesh <quic_ppranees@quicinc.com> Co-developed-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com> Co-developed-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com> Co-developed-by: Sriram R <quic_srirrama@quicinc.com> Signed-off-by: Sriram R <quic_srirrama@quicinc.com> Co-developed-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Signed-off-by: Vasanthakumar Thiagarajan <quic_vthiagar@quicinc.com> Co-developed-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
2022-11-28 17:09:53 +02:00
if (!ab->qmi.event_wq) {
ath12k_err(ab, "failed to allocate workqueue\n");
return -EFAULT;
}
INIT_LIST_HEAD(&ab->qmi.event_list);
spin_lock_init(&ab->qmi.event_lock);
INIT_WORK(&ab->qmi.event_work, ath12k_qmi_driver_event_work);
ret = qmi_add_lookup(&ab->qmi.handle, ATH12K_QMI_WLFW_SERVICE_ID_V01,
ATH12K_QMI_WLFW_SERVICE_VERS_V01,
ab->qmi.service_ins_id);
if (ret < 0) {
ath12k_warn(ab, "failed to add qmi lookup\n");
destroy_workqueue(ab->qmi.event_wq);
return ret;
}
return ret;
}
void ath12k_qmi_deinit_service(struct ath12k_base *ab)
{
qmi_handle_release(&ab->qmi.handle);
cancel_work_sync(&ab->qmi.event_work);
destroy_workqueue(ab->qmi.event_wq);
ath12k_qmi_m3_free(ab);
ath12k_qmi_free_target_mem_chunk(ab);
}
wifi: ath12k: add ath12k_qmi_free_resource() for recovery ath12k_qmi_free_target_mem_chunk() and ath12k_qmi_m3_free() is static in qmi.c, they are needed for recovery, export them in a new function Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Signed-off-by: Wen Gong <quic_wgong@quicinc.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20230721055305.20420-3-quic_wgong@quicinc.com
2023-10-10 10:27:21 +03:00
void ath12k_qmi_free_resource(struct ath12k_base *ab)
{
ath12k_qmi_free_target_mem_chunk(ab);
ath12k_qmi_m3_free(ab);
}
Reference in a new issue Copy permalink