linux/drivers/net/wireless/ath/ath11k/peer.c

671 lines
15 KiB
C
Raw Normal View History

ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
// SPDX-License-Identifier: BSD-3-Clause-Clear
/*
* Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
*/
#include "core.h"
#include "peer.h"
#include "debug.h"
static struct ath11k_peer *ath11k_peer_find_list_by_id(struct ath11k_base *ab,
int peer_id)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
{
struct ath11k_peer *peer;
lockdep_assert_held(&ab->base_lock);
list_for_each_entry(peer, &ab->peers, list) {
if (peer->peer_id != peer_id)
continue;
return peer;
}
return NULL;
}
struct ath11k_peer *ath11k_peer_find(struct ath11k_base *ab, int vdev_id,
const u8 *addr)
{
struct ath11k_peer *peer;
lockdep_assert_held(&ab->base_lock);
list_for_each_entry(peer, &ab->peers, list) {
if (peer->vdev_id != vdev_id)
continue;
if (!ether_addr_equal(peer->addr, addr))
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
continue;
return peer;
}
return NULL;
}
struct ath11k_peer *ath11k_peer_find_by_addr(struct ath11k_base *ab,
const u8 *addr)
{
struct ath11k_peer *peer;
lockdep_assert_held(&ab->base_lock);
if (!ab->rhead_peer_addr)
return NULL;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
peer = rhashtable_lookup_fast(ab->rhead_peer_addr, addr,
ab->rhash_peer_addr_param);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
return peer;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
}
struct ath11k_peer *ath11k_peer_find_by_id(struct ath11k_base *ab,
int peer_id)
{
struct ath11k_peer *peer;
lockdep_assert_held(&ab->base_lock);
if (!ab->rhead_peer_id)
return NULL;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
peer = rhashtable_lookup_fast(ab->rhead_peer_id, &peer_id,
ab->rhash_peer_id_param);
return peer;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
}
struct ath11k_peer *ath11k_peer_find_by_vdev_id(struct ath11k_base *ab,
int vdev_id)
{
struct ath11k_peer *peer;
spin_lock_bh(&ab->base_lock);
list_for_each_entry(peer, &ab->peers, list) {
if (vdev_id == peer->vdev_id) {
spin_unlock_bh(&ab->base_lock);
return peer;
}
}
spin_unlock_bh(&ab->base_lock);
return NULL;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
void ath11k_peer_unmap_event(struct ath11k_base *ab, u16 peer_id)
{
struct ath11k_peer *peer;
spin_lock_bh(&ab->base_lock);
peer = ath11k_peer_find_list_by_id(ab, peer_id);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
if (!peer) {
ath11k_warn(ab, "peer-unmap-event: unknown peer id %d\n",
peer_id);
goto exit;
}
ath11k_dbg(ab, ATH11K_DBG_DP_HTT, "peer unmap vdev %d peer %pM id %d\n",
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
peer->vdev_id, peer->addr, peer_id);
list_del(&peer->list);
kfree(peer);
wake_up(&ab->peer_mapping_wq);
exit:
spin_unlock_bh(&ab->base_lock);
}
void ath11k_peer_map_event(struct ath11k_base *ab, u8 vdev_id, u16 peer_id,
u8 *mac_addr, u16 ast_hash, u16 hw_peer_id)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
{
struct ath11k_peer *peer;
spin_lock_bh(&ab->base_lock);
peer = ath11k_peer_find(ab, vdev_id, mac_addr);
if (!peer) {
peer = kzalloc(sizeof(*peer), GFP_ATOMIC);
if (!peer)
goto exit;
peer->vdev_id = vdev_id;
peer->peer_id = peer_id;
peer->ast_hash = ast_hash;
peer->hw_peer_id = hw_peer_id;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
ether_addr_copy(peer->addr, mac_addr);
list_add(&peer->list, &ab->peers);
wake_up(&ab->peer_mapping_wq);
}
ath11k_dbg(ab, ATH11K_DBG_DP_HTT, "peer map vdev %d peer %pM id %d\n",
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
vdev_id, mac_addr, peer_id);
exit:
spin_unlock_bh(&ab->base_lock);
}
static int ath11k_wait_for_peer_common(struct ath11k_base *ab, int vdev_id,
const u8 *addr, bool expect_mapped)
{
int ret;
ret = wait_event_timeout(ab->peer_mapping_wq, ({
bool mapped;
spin_lock_bh(&ab->base_lock);
mapped = !!ath11k_peer_find(ab, vdev_id, addr);
spin_unlock_bh(&ab->base_lock);
(mapped == expect_mapped ||
test_bit(ATH11K_FLAG_CRASH_FLUSH, &ab->dev_flags));
}), 3 * HZ);
if (ret <= 0)
return -ETIMEDOUT;
return 0;
}
static inline int ath11k_peer_rhash_insert(struct ath11k_base *ab,
struct rhashtable *rtbl,
struct rhash_head *rhead,
struct rhashtable_params *params,
void *key)
{
struct ath11k_peer *tmp;
lockdep_assert_held(&ab->tbl_mtx_lock);
tmp = rhashtable_lookup_get_insert_fast(rtbl, rhead, *params);
if (!tmp)
return 0;
else if (IS_ERR(tmp))
return PTR_ERR(tmp);
else
return -EEXIST;
}
static inline int ath11k_peer_rhash_remove(struct ath11k_base *ab,
struct rhashtable *rtbl,
struct rhash_head *rhead,
struct rhashtable_params *params)
{
int ret;
lockdep_assert_held(&ab->tbl_mtx_lock);
ret = rhashtable_remove_fast(rtbl, rhead, *params);
if (ret && ret != -ENOENT)
return ret;
return 0;
}
static int ath11k_peer_rhash_add(struct ath11k_base *ab, struct ath11k_peer *peer)
{
int ret;
lockdep_assert_held(&ab->base_lock);
lockdep_assert_held(&ab->tbl_mtx_lock);
if (!ab->rhead_peer_id || !ab->rhead_peer_addr)
return -EPERM;
ret = ath11k_peer_rhash_insert(ab, ab->rhead_peer_id, &peer->rhash_id,
&ab->rhash_peer_id_param, &peer->peer_id);
if (ret) {
ath11k_warn(ab, "failed to add peer %pM with id %d in rhash_id ret %d\n",
peer->addr, peer->peer_id, ret);
return ret;
}
ret = ath11k_peer_rhash_insert(ab, ab->rhead_peer_addr, &peer->rhash_addr,
&ab->rhash_peer_addr_param, &peer->addr);
if (ret) {
ath11k_warn(ab, "failed to add peer %pM with id %d in rhash_addr ret %d\n",
peer->addr, peer->peer_id, ret);
goto err_clean;
}
return 0;
err_clean:
ath11k_peer_rhash_remove(ab, ab->rhead_peer_id, &peer->rhash_id,
&ab->rhash_peer_id_param);
return ret;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
void ath11k_peer_cleanup(struct ath11k *ar, u32 vdev_id)
{
struct ath11k_peer *peer, *tmp;
struct ath11k_base *ab = ar->ab;
lockdep_assert_held(&ar->conf_mutex);
mutex_lock(&ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
spin_lock_bh(&ab->base_lock);
list_for_each_entry_safe(peer, tmp, &ab->peers, list) {
if (peer->vdev_id != vdev_id)
continue;
ath11k_warn(ab, "removing stale peer %pM from vdev_id %d\n",
peer->addr, vdev_id);
ath11k_peer_rhash_delete(ab, peer);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
list_del(&peer->list);
kfree(peer);
ar->num_peers--;
}
spin_unlock_bh(&ab->base_lock);
mutex_unlock(&ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
}
static int ath11k_wait_for_peer_deleted(struct ath11k *ar, int vdev_id, const u8 *addr)
{
return ath11k_wait_for_peer_common(ar->ab, vdev_id, addr, false);
}
int ath11k_wait_for_peer_delete_done(struct ath11k *ar, u32 vdev_id,
const u8 *addr)
{
int ret;
unsigned long time_left;
ret = ath11k_wait_for_peer_deleted(ar, vdev_id, addr);
if (ret) {
ath11k_warn(ar->ab, "failed wait for peer deleted");
return ret;
}
time_left = wait_for_completion_timeout(&ar->peer_delete_done,
3 * HZ);
if (time_left == 0) {
ath11k_warn(ar->ab, "Timeout in receiving peer delete response\n");
return -ETIMEDOUT;
}
return 0;
}
static int __ath11k_peer_delete(struct ath11k *ar, u32 vdev_id, const u8 *addr)
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
{
int ret;
struct ath11k_peer *peer;
struct ath11k_base *ab = ar->ab;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
lockdep_assert_held(&ar->conf_mutex);
mutex_lock(&ab->tbl_mtx_lock);
spin_lock_bh(&ab->base_lock);
peer = ath11k_peer_find_by_addr(ab, addr);
wifi: ath11k: fix peer addition/deletion error on sta band migration This patch try to fix the following error. Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561227] ath11k c000000.wifi: peer already added vdev id 0 req, vdev id 1 present Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561282] ath11k c000000.wifi: Failed to add peer: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.568053] ath11k c000000.wifi: Failed to add station: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: Could not add STA to kernel driver Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: did not acknowledge authentication response Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED 28:c2:1f:xx:xx:xx Wed Jun 1 22:19:31 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: disassociated due to inactivity Wed Jun 1 22:19:32 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) To repro this: - Have 2 Wifi with the same bssid and pass on different band (2.4 and 5GHz) - Enable 802.11r Fast Transaction with same mobility domain - FT Protocol: FT over the Air From a openwrt system issue the command (with the correct mac) ubus call hostapd.wlan1 wnm_disassoc_imminent '{"addr":"28:C2:1F:xx:xx:xx"}' Notice the log printing the errors. The cause of this error has been investigated and we found that this is related to the WiFi Fast Transaction feature. We observed that this is triggered when the router tells the device to change band. In this case the device first auth to the other band and then the disconnect path from the prev band is triggered. This is problematic with the current rhash implementation since the addrs is used as key and the logic of "adding first, delete later" conflicts with the rhash logic. In fact peer addition will fail since the peer is already added and with that fixed a peer deletion will cause unitended effect by removing the peer just added. Current solution to this is to add additional logic to the peer delete, make sure we are deleting the correct peer taken from the rhash table (and fallback to the peer list) and for the peer add logic delete the peer entry for the rhash list before adding the new one (counting as an error only when a peer with the same vlan_id is asked to be added). With this change, a sta can correctly transition from 2.4GHz and 5GHZ with no drop and no error are printed. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: 7b0c70d92a43 ("ath11k: Add peer rhash table support") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603164559.27769-1-ansuelsmth@gmail.com
2022-09-22 10:35:14 +03:00
/* Check if the found peer is what we want to remove.
* While the sta is transitioning to another band we may
* have 2 peer with the same addr assigned to different
* vdev_id. Make sure we are deleting the correct peer.
*/
if (peer && peer->vdev_id == vdev_id)
ath11k_peer_rhash_delete(ab, peer);
/* Fallback to peer list search if the correct peer can't be found.
* Skip the deletion of the peer from the rhash since it has already
* been deleted in peer add.
*/
if (!peer)
peer = ath11k_peer_find(ab, vdev_id, addr);
if (!peer) {
spin_unlock_bh(&ab->base_lock);
mutex_unlock(&ab->tbl_mtx_lock);
ath11k_warn(ab,
"failed to find peer vdev_id %d addr %pM in delete\n",
vdev_id, addr);
return -EINVAL;
}
spin_unlock_bh(&ab->base_lock);
mutex_unlock(&ab->tbl_mtx_lock);
reinit_completion(&ar->peer_delete_done);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
ret = ath11k_wmi_send_peer_delete_cmd(ar, addr, vdev_id);
if (ret) {
ath11k_warn(ab,
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
"failed to delete peer vdev_id %d addr %pM ret %d\n",
vdev_id, addr, ret);
return ret;
}
ret = ath11k_wait_for_peer_delete_done(ar, vdev_id, addr);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
if (ret)
return ret;
return 0;
}
int ath11k_peer_delete(struct ath11k *ar, u32 vdev_id, u8 *addr)
{
int ret;
lockdep_assert_held(&ar->conf_mutex);
ret = __ath11k_peer_delete(ar, vdev_id, addr);
if (ret)
return ret;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
ar->num_peers--;
return 0;
}
static int ath11k_wait_for_peer_created(struct ath11k *ar, int vdev_id, const u8 *addr)
{
return ath11k_wait_for_peer_common(ar->ab, vdev_id, addr, true);
}
int ath11k_peer_create(struct ath11k *ar, struct ath11k_vif *arvif,
struct ieee80211_sta *sta, struct peer_create_params *param)
{
struct ath11k_peer *peer;
struct ath11k_sta *arsta;
int ret, fbret;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
lockdep_assert_held(&ar->conf_mutex);
if (ar->num_peers > (ar->max_num_peers - 1)) {
ath11k_warn(ar->ab,
"failed to create peer due to insufficient peer entry resource in firmware\n");
return -ENOBUFS;
}
mutex_lock(&ar->ab->tbl_mtx_lock);
spin_lock_bh(&ar->ab->base_lock);
peer = ath11k_peer_find_by_addr(ar->ab, param->peer_addr);
if (peer) {
wifi: ath11k: fix peer addition/deletion error on sta band migration This patch try to fix the following error. Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561227] ath11k c000000.wifi: peer already added vdev id 0 req, vdev id 1 present Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561282] ath11k c000000.wifi: Failed to add peer: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.568053] ath11k c000000.wifi: Failed to add station: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: Could not add STA to kernel driver Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: did not acknowledge authentication response Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED 28:c2:1f:xx:xx:xx Wed Jun 1 22:19:31 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: disassociated due to inactivity Wed Jun 1 22:19:32 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) To repro this: - Have 2 Wifi with the same bssid and pass on different band (2.4 and 5GHz) - Enable 802.11r Fast Transaction with same mobility domain - FT Protocol: FT over the Air From a openwrt system issue the command (with the correct mac) ubus call hostapd.wlan1 wnm_disassoc_imminent '{"addr":"28:C2:1F:xx:xx:xx"}' Notice the log printing the errors. The cause of this error has been investigated and we found that this is related to the WiFi Fast Transaction feature. We observed that this is triggered when the router tells the device to change band. In this case the device first auth to the other band and then the disconnect path from the prev band is triggered. This is problematic with the current rhash implementation since the addrs is used as key and the logic of "adding first, delete later" conflicts with the rhash logic. In fact peer addition will fail since the peer is already added and with that fixed a peer deletion will cause unitended effect by removing the peer just added. Current solution to this is to add additional logic to the peer delete, make sure we are deleting the correct peer taken from the rhash table (and fallback to the peer list) and for the peer add logic delete the peer entry for the rhash list before adding the new one (counting as an error only when a peer with the same vlan_id is asked to be added). With this change, a sta can correctly transition from 2.4GHz and 5GHZ with no drop and no error are printed. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: 7b0c70d92a43 ("ath11k: Add peer rhash table support") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603164559.27769-1-ansuelsmth@gmail.com
2022-09-22 10:35:14 +03:00
if (peer->vdev_id == param->vdev_id) {
spin_unlock_bh(&ar->ab->base_lock);
mutex_unlock(&ar->ab->tbl_mtx_lock);
wifi: ath11k: fix peer addition/deletion error on sta band migration This patch try to fix the following error. Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561227] ath11k c000000.wifi: peer already added vdev id 0 req, vdev id 1 present Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.561282] ath11k c000000.wifi: Failed to add peer: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:30 2022 kern.warn kernel: [ 119.568053] ath11k c000000.wifi: Failed to add station: 28:c2:1f:xx:xx:xx for VDEV: 0 Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: Could not add STA to kernel driver Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan2: STA 28:c2:1f:xx:xx:xx IEEE 802.11: did not acknowledge authentication response Wed Jun 1 22:19:31 2022 daemon.notice hostapd: wlan1: AP-STA-DISCONNECTED 28:c2:1f:xx:xx:xx Wed Jun 1 22:19:31 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: disassociated due to inactivity Wed Jun 1 22:19:32 2022 daemon.info hostapd: wlan1: STA 28:c2:1f:xx:xx:xx IEEE 802.11: deauthenticated due to inactivity (timer DEAUTH/REMOVE) To repro this: - Have 2 Wifi with the same bssid and pass on different band (2.4 and 5GHz) - Enable 802.11r Fast Transaction with same mobility domain - FT Protocol: FT over the Air From a openwrt system issue the command (with the correct mac) ubus call hostapd.wlan1 wnm_disassoc_imminent '{"addr":"28:C2:1F:xx:xx:xx"}' Notice the log printing the errors. The cause of this error has been investigated and we found that this is related to the WiFi Fast Transaction feature. We observed that this is triggered when the router tells the device to change band. In this case the device first auth to the other band and then the disconnect path from the prev band is triggered. This is problematic with the current rhash implementation since the addrs is used as key and the logic of "adding first, delete later" conflicts with the rhash logic. In fact peer addition will fail since the peer is already added and with that fixed a peer deletion will cause unitended effect by removing the peer just added. Current solution to this is to add additional logic to the peer delete, make sure we are deleting the correct peer taken from the rhash table (and fallback to the peer list) and for the peer add logic delete the peer entry for the rhash list before adding the new one (counting as an error only when a peer with the same vlan_id is asked to be added). With this change, a sta can correctly transition from 2.4GHz and 5GHZ with no drop and no error are printed. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1 Fixes: 7b0c70d92a43 ("ath11k: Add peer rhash table support") Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220603164559.27769-1-ansuelsmth@gmail.com
2022-09-22 10:35:14 +03:00
return -EINVAL;
}
/* Assume sta is transitioning to another band.
* Remove here the peer from rhash.
*/
ath11k_peer_rhash_delete(ar->ab, peer);
}
spin_unlock_bh(&ar->ab->base_lock);
mutex_unlock(&ar->ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
ret = ath11k_wmi_send_peer_create_cmd(ar, param);
if (ret) {
ath11k_warn(ar->ab,
"failed to send peer create vdev_id %d ret %d\n",
param->vdev_id, ret);
return ret;
}
ret = ath11k_wait_for_peer_created(ar, param->vdev_id,
param->peer_addr);
if (ret)
return ret;
mutex_lock(&ar->ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
spin_lock_bh(&ar->ab->base_lock);
peer = ath11k_peer_find(ar->ab, param->vdev_id, param->peer_addr);
if (!peer) {
spin_unlock_bh(&ar->ab->base_lock);
mutex_unlock(&ar->ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
ath11k_warn(ar->ab, "failed to find peer %pM on vdev %i after creation\n",
param->peer_addr, param->vdev_id);
ret = -ENOENT;
goto cleanup;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
}
ret = ath11k_peer_rhash_add(ar->ab, peer);
if (ret) {
spin_unlock_bh(&ar->ab->base_lock);
mutex_unlock(&ar->ab->tbl_mtx_lock);
goto cleanup;
}
peer->pdev_idx = ar->pdev_idx;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
peer->sta = sta;
if (arvif->vif->type == NL80211_IFTYPE_STATION) {
arvif->ast_hash = peer->ast_hash;
arvif->ast_idx = peer->hw_peer_id;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
peer->sec_type = HAL_ENCRYPT_TYPE_OPEN;
peer->sec_type_grp = HAL_ENCRYPT_TYPE_OPEN;
if (sta) {
arsta = ath11k_sta_to_arsta(sta);
arsta->tcl_metadata |= FIELD_PREP(HTT_TCL_META_DATA_TYPE, 0) |
FIELD_PREP(HTT_TCL_META_DATA_PEER_ID,
peer->peer_id);
/* set HTT extension valid bit to 0 by default */
arsta->tcl_metadata &= ~HTT_TCL_META_DATA_VALID_HTT;
}
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
ar->num_peers++;
spin_unlock_bh(&ar->ab->base_lock);
mutex_unlock(&ar->ab->tbl_mtx_lock);
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
return 0;
cleanup:
fbret = __ath11k_peer_delete(ar, param->vdev_id, param->peer_addr);
if (fbret)
ath11k_warn(ar->ab, "failed peer %pM delete vdev_id %d fallback ret %d\n",
param->peer_addr, param->vdev_id, fbret);
return ret;
ath11k: driver for Qualcomm IEEE 802.11ax devices ath11k is a new driver for Qualcomm IEEE 802.11ax devices, first supporting only IPQ8074 SoC using the shared memory AHB bus. ath11k uses mac80211 and supports AP, Station and Mesh modes. Even though ath11k has some similar code as with ath10k (especially the WMI layer) it was concluded to be simpler to have a "clean start" for ath11k code base and not try to share the code with ath10k. This makes maintenance easier and avoids major changes in ath10k, which would have significantly increased the risk of regressions in existing setups. Even though the driver is very similar with ath10k but there are major differences as well. The datapath is completely different. ath11k supports multiple MACs, called "soc" in the firmware interface. And there's only one WMI interface to support. Currently ath11k supports only IEEE 802.11ac mode, but patches for 802.11ax are available and they will be submitted after ath11k is accepted to upstream. The firmware images are available from ath11k-firmware repository but they will be also submitted to linux-firmware: https://github.com/kvalo/ath11k-firmware This was tested with firmware version WLAN.HK.2.1.0.1-00629-QCAHKSWPL_SILICONZ-1. The driver has had multiple authors who are listed in alphabetical order below. Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org> Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org> Signed-off-by: Ganesh Sesetti <gseset@codeaurora.org> Signed-off-by: Govindaraj Saminathan <gsamin@codeaurora.org> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Karthikeyan Periyasamy <periyasa@codeaurora.org> Signed-off-by: kbuild test robot <lkp@intel.com> Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org> Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Signed-off-by: Miles Hu <milehu@codeaurora.org> Signed-off-by: Muna Sinada <msinada@codeaurora.org> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org> Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Sven Eckelmann <seckelmann@datto.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@codeaurora.org> Signed-off-by: Venkateswara Naralasetty <vnaralas@codeaurora.org>
2019-11-23 09:58:40 +02:00
}
int ath11k_peer_rhash_delete(struct ath11k_base *ab, struct ath11k_peer *peer)
{
int ret;
lockdep_assert_held(&ab->base_lock);
lockdep_assert_held(&ab->tbl_mtx_lock);
if (!ab->rhead_peer_id || !ab->rhead_peer_addr)
return -EPERM;
ret = ath11k_peer_rhash_remove(ab, ab->rhead_peer_addr, &peer->rhash_addr,
&ab->rhash_peer_addr_param);
if (ret) {
ath11k_warn(ab, "failed to remove peer %pM id %d in rhash_addr ret %d\n",
peer->addr, peer->peer_id, ret);
return ret;
}
ret = ath11k_peer_rhash_remove(ab, ab->rhead_peer_id, &peer->rhash_id,
&ab->rhash_peer_id_param);
if (ret) {
ath11k_warn(ab, "failed to remove peer %pM id %d in rhash_id ret %d\n",
peer->addr, peer->peer_id, ret);
return ret;
}
return 0;
}
static int ath11k_peer_rhash_id_tbl_init(struct ath11k_base *ab)
{
struct rhashtable_params *param;
struct rhashtable *rhash_id_tbl;
int ret;
size_t size;
lockdep_assert_held(&ab->tbl_mtx_lock);
if (ab->rhead_peer_id)
return 0;
size = sizeof(*ab->rhead_peer_id);
rhash_id_tbl = kzalloc(size, GFP_KERNEL);
if (!rhash_id_tbl) {
ath11k_warn(ab, "failed to init rhash id table due to no mem (size %zu)\n",
size);
return -ENOMEM;
}
param = &ab->rhash_peer_id_param;
param->key_offset = offsetof(struct ath11k_peer, peer_id);
param->head_offset = offsetof(struct ath11k_peer, rhash_id);
param->key_len = sizeof_field(struct ath11k_peer, peer_id);
param->automatic_shrinking = true;
param->nelem_hint = ab->num_radios * TARGET_NUM_PEERS_PDEV(ab);
ret = rhashtable_init(rhash_id_tbl, param);
if (ret) {
ath11k_warn(ab, "failed to init peer id rhash table %d\n", ret);
goto err_free;
}
spin_lock_bh(&ab->base_lock);
if (!ab->rhead_peer_id) {
ab->rhead_peer_id = rhash_id_tbl;
} else {
spin_unlock_bh(&ab->base_lock);
goto cleanup_tbl;
}
spin_unlock_bh(&ab->base_lock);
return 0;
cleanup_tbl:
rhashtable_destroy(rhash_id_tbl);
err_free:
kfree(rhash_id_tbl);
return ret;
}
static int ath11k_peer_rhash_addr_tbl_init(struct ath11k_base *ab)
{
struct rhashtable_params *param;
struct rhashtable *rhash_addr_tbl;
int ret;
size_t size;
lockdep_assert_held(&ab->tbl_mtx_lock);
if (ab->rhead_peer_addr)
return 0;
size = sizeof(*ab->rhead_peer_addr);
rhash_addr_tbl = kzalloc(size, GFP_KERNEL);
if (!rhash_addr_tbl) {
ath11k_warn(ab, "failed to init rhash addr table due to no mem (size %zu)\n",
size);
return -ENOMEM;
}
param = &ab->rhash_peer_addr_param;
param->key_offset = offsetof(struct ath11k_peer, addr);
param->head_offset = offsetof(struct ath11k_peer, rhash_addr);
param->key_len = sizeof_field(struct ath11k_peer, addr);
param->automatic_shrinking = true;
param->nelem_hint = ab->num_radios * TARGET_NUM_PEERS_PDEV(ab);
ret = rhashtable_init(rhash_addr_tbl, param);
if (ret) {
ath11k_warn(ab, "failed to init peer addr rhash table %d\n", ret);
goto err_free;
}
spin_lock_bh(&ab->base_lock);
if (!ab->rhead_peer_addr) {
ab->rhead_peer_addr = rhash_addr_tbl;
} else {
spin_unlock_bh(&ab->base_lock);
goto cleanup_tbl;
}
spin_unlock_bh(&ab->base_lock);
return 0;
cleanup_tbl:
rhashtable_destroy(rhash_addr_tbl);
err_free:
kfree(rhash_addr_tbl);
return ret;
}
static inline void ath11k_peer_rhash_id_tbl_destroy(struct ath11k_base *ab)
{
lockdep_assert_held(&ab->tbl_mtx_lock);
if (!ab->rhead_peer_id)
return;
rhashtable_destroy(ab->rhead_peer_id);
kfree(ab->rhead_peer_id);
ab->rhead_peer_id = NULL;
}
static inline void ath11k_peer_rhash_addr_tbl_destroy(struct ath11k_base *ab)
{
lockdep_assert_held(&ab->tbl_mtx_lock);
if (!ab->rhead_peer_addr)
return;
rhashtable_destroy(ab->rhead_peer_addr);
kfree(ab->rhead_peer_addr);
ab->rhead_peer_addr = NULL;
}
int ath11k_peer_rhash_tbl_init(struct ath11k_base *ab)
{
int ret;
mutex_lock(&ab->tbl_mtx_lock);
ret = ath11k_peer_rhash_id_tbl_init(ab);
if (ret)
goto out;
ret = ath11k_peer_rhash_addr_tbl_init(ab);
if (ret)
goto cleanup_tbl;
mutex_unlock(&ab->tbl_mtx_lock);
return 0;
cleanup_tbl:
ath11k_peer_rhash_id_tbl_destroy(ab);
out:
mutex_unlock(&ab->tbl_mtx_lock);
return ret;
}
void ath11k_peer_rhash_tbl_destroy(struct ath11k_base *ab)
{
mutex_lock(&ab->tbl_mtx_lock);
ath11k_peer_rhash_addr_tbl_destroy(ab);
ath11k_peer_rhash_id_tbl_destroy(ab);
mutex_unlock(&ab->tbl_mtx_lock);
}