public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-05-24 10:39:52 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/drivers/net/ethernet/intel/ice/ice_repr.h

44 lines
1.1 KiB
C
Raw Normal View History

ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-19 17:08:50 -07:00
/* SPDX-License-Identifier: GPL-2.0 */
/* Copyright (C) 2019-2021, Intel Corporation. */
#ifndef _ICE_REPR_H_
#define _ICE_REPR_H_
#include <net/dst_metadata.h>
ice: count representor stats Removing control plane VSI result in no information about slow-path statistic. In current solution statistics need to be counted in driver. Patch is based on similar implementation done by Simon Horman in nfp: commit eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Add const modifier to netdev parameter in ice_netdev_to_repr(). It isn't (and shouldn't be) modified in the function. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-01 12:54:14 +01:00
struct ice_repr_pcpu_stats {
struct u64_stats_sync syncp;
u64 rx_packets;
u64 rx_bytes;
u64 tx_packets;
u64 tx_bytes;
u64 tx_drops;
};
ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-19 17:08:50 -07:00
struct ice_repr {
struct ice_vsi *src_vsi;
struct ice_vf *vf;
struct net_device *netdev;
struct metadata_dst *dst;
ice: Implement basic eswitch bridge setup With this patch, ice driver is able to track if the port representors or uplink port were added to the linux bridge in switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to detect this. ice_esw_br data structure reflects the linux bridge and stores all the ports of the bridge (ice_esw_br_port) in xarray, it's created when the first port is added to the bridge and freed once the last port is removed. Note that only one bridge is supported per eswitch. Bridge port (ice_esw_br_port) can be either a VF port representor port or uplink port (ice_esw_br_port_type). In both cases bridge port holds a reference to the VSI, VF's VSI in case of the PR and uplink VSI in case of the uplink. VSI's index is used as an index to the xarray in which ports are stored. Add a check which prevents configuring switchdev mode if uplink is already added to any bridge. This is needed because we need to listen for NETDEV_CHANGEUPPER events to record if the uplink was added to the bridge. Netdevice notifier is registered after eswitch mode is changed to switchdev. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-12 13:03:31 +02:00
struct ice_esw_br_port *br_port;
ice: count representor stats Removing control plane VSI result in no information about slow-path statistic. In current solution statistics need to be counted in driver. Patch is based on similar implementation done by Simon Horman in nfp: commit eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Add const modifier to netdev parameter in ice_netdev_to_repr(). It isn't (and shouldn't be) modified in the function. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-01 12:54:14 +01:00
struct ice_repr_pcpu_stats __percpu *stats;
ice: track port representors in xarray Instead of assuming that each VF has pointer to port representor save it in xarray. It will allow adding port representor for other device types. Drop reference to VF where it is use only to get port representor. Get it from xarray instead. The functions will no longer by specific for VF, rename them. Track id assigned by xarray in port representor structure. The id can't be used as ::q_id, because it is fixed during port representor lifetime. ::q_id can change after adding / removing other port representors. Side effect of removing VF pointer is that we are losing VF MAC information used in unrolling. Store it in port representor as parent MAC. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-24 13:09:20 +02:00
u32 id;
u8 parent_mac[ETH_ALEN];
ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-19 17:08:50 -07:00
};
ice: add VF representors one by one Implement adding representors one by one. Always set switchdev environment when first representor is being added and clear environment when last one is being removed. Basic switchdev configuration remains the same. Code related to creating and configuring representor was changed. Instead of setting whole representors in one function handle only one representor in setup function. The same with removing representors. Stop representors when new one is being added or removed. Stop means, disabling napi, stopping traffic and removing slow path rule. It is needed because ::q_id will change after remapping, so each representor will need new rule. When representor are stopped rebuild control plane VSI with one more or one less queue. One more if new representor is being added, one less if representor is being removed. Bridge port is removed during unregister_netdev() call on PR, so there is no need to call it from driver side. After that do remap new queues to correct vector. At the end start all representors (napi enable, start queues, add slow path rule). Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-24 13:09:27 +02:00
struct ice_repr *ice_repr_add_vf(struct ice_vf *vf);
void ice_repr_rem_vf(struct ice_repr *repr);
ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-19 17:08:50 -07:00
ice: rebuild switchdev when resetting all VFs As resetting all VFs behaves mostly like creating new VFs also eswitch infrastructure has to be recreated. The easiest way to do that is to rebuild eswitch after resetting VFs. Implement helper functions to start and stop all representors queues. This is used to disable traffic on port representors. In rebuild path: - NAPI has to be disabled - eswitch environment has to be set up - new port representors have to be created, because the old one had pointer to not existing VFs - new control plane VSI ring should be remapped - NAPI hast to be enabled - rxdid has to be set to FLEX_NIC_2, because this descriptor id support source_vsi, which is needed on control plane VSI queues - port representors queues have to be started Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-19 17:08:57 -07:00
void ice_repr_start_tx_queues(struct ice_repr *repr);
void ice_repr_stop_tx_queues(struct ice_repr *repr);
ice: count representor stats Removing control plane VSI result in no information about slow-path statistic. In current solution statistics need to be counted in driver. Patch is based on similar implementation done by Simon Horman in nfp: commit eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Add const modifier to netdev parameter in ice_netdev_to_repr(). It isn't (and shouldn't be) modified in the function. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-01 12:54:14 +01:00
struct ice_repr *ice_netdev_to_repr(const struct net_device *netdev);
ice: Implement basic eswitch bridge setup With this patch, ice driver is able to track if the port representors or uplink port were added to the linux bridge in switchdev mode. Listen for NETDEV_CHANGEUPPER events in order to detect this. ice_esw_br data structure reflects the linux bridge and stores all the ports of the bridge (ice_esw_br_port) in xarray, it's created when the first port is added to the bridge and freed once the last port is removed. Note that only one bridge is supported per eswitch. Bridge port (ice_esw_br_port) can be either a VF port representor port or uplink port (ice_esw_br_port_type). In both cases bridge port holds a reference to the VSI, VF's VSI in case of the PR and uplink VSI in case of the uplink. VSI's index is used as an index to the xarray in which ports are stored. Add a check which prevents configuring switchdev mode if uplink is already added to any bridge. This is needed because we need to listen for NETDEV_CHANGEUPPER events to record if the uplink was added to the bridge. Netdevice notifier is registered after eswitch mode is changed to switchdev. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-07-12 13:03:31 +02:00
bool ice_is_port_repr_netdev(const struct net_device *netdev);
ice: make representor code generic Representor code needs to be independent from specific device type, like in this case VF. Make generic add / remove representor function and specific add VF / rem VF function. New device types will follow this scheme. In bridge offload code there is a need to get representor pointer based on VSI. Implement helper function to achieve that. Reviewed-by: Piotr Raczynski <piotr.raczynski@intel.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-10-24 13:09:22 +02:00
struct ice_repr *ice_repr_get_by_vsi(struct ice_vsi *vsi);
ice: count representor stats Removing control plane VSI result in no information about slow-path statistic. In current solution statistics need to be counted in driver. Patch is based on similar implementation done by Simon Horman in nfp: commit eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Add const modifier to netdev parameter in ice_netdev_to_repr(). It isn't (and shouldn't be) modified in the function. Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-01 12:54:14 +01:00
void ice_repr_inc_tx_stats(struct ice_repr *repr, unsigned int len,
int xmit_status);
void ice_repr_inc_rx_stats(struct net_device *netdev, unsigned int len);
ice: introduce VF port representor Port representor is used to manage VF from host side. To allow it each created representor registers netdevice with random hw address. Also devlink port is created for all representors. Port representor name is created based on switch id or managed by devlink core if devlink port was registered with success. Open and stop ndo ops are implemented to allow managing the VF link state. Link state is tracked in VF struct. Struct ice_netdev_priv is extended by pointer to representor field. This is needed to get correct representor from netdev struct mostly used in ndo calls. Implement helper functions to check if given netdev is netdev of port representor (ice_is_port_repr_netdev) and to get representor from netdev (ice_netdev_to_repr). As driver mostly will create or destroy port representors on all VFs instead of on single one, write functions to add and remove representor for each VF. Representor struct contains pointer to source VSI, which is VSI configured on VF, backpointer to VF, backpointer to netdev, q_vector pointer and metadata_dst which will be used in data path. Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-08-19 17:08:50 -07:00
#endif
Reference in a new issue Copy permalink