public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-05-24 10:39:52 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/drivers/net/dsa/microchip/lan937x.h

25 lines
1.1 KiB
C
Raw Normal View History

net: dsa: microchip: add DSA support for microchip LAN937x Basic DSA driver support for lan937x and the device will be configured through SPI interface. It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the functionality of ksz9477 series switch. drivers/net/dsa/microchip/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 20:31:46 +05:30
/* SPDX-License-Identifier: GPL-2.0 */
/* Microchip lan937x dev ops headers
* Copyright (C) 2019-2022 Microchip Technology Inc.
*/
#ifndef __LAN937X_CFG_H
#define __LAN937X_CFG_H
int lan937x_reset_switch(struct ksz_device *dev);
int lan937x_setup(struct dsa_switch *ds);
net: dsa: microchip: lan937x: add interrupt support for port phy link This patch enables the interrupts for internal phy link detection for LAN937x. The interrupt enable bits are active low. There is global interrupt mask for each port. And each port has the individual interrupt mask for TAS. QCI, SGMII, PTP, PHY and ACL. The first level of interrupt domain is registered for global port interrupt and second level of interrupt domain for the individual port interrupts. The phy interrupt is enabled in the lan937x_mdio_register function. Interrupt from which port is raised will be detected based on the interrupt host data. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02 16:02:10 +05:30
void lan937x_teardown(struct dsa_switch *ds);
net: dsa: microchip: add DSA support for microchip LAN937x Basic DSA driver support for lan937x and the device will be configured through SPI interface. It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the functionality of ksz9477 series switch. drivers/net/dsa/microchip/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 20:31:46 +05:30
void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port);
void lan937x_config_cpu_port(struct dsa_switch *ds);
int lan937x_switch_init(struct ksz_device *dev);
void lan937x_switch_exit(struct ksz_device *dev);
net: dsa: microchip: allow to pass return values for PHY read/write accesses PHY access may end with errors on different levels. So, allow to forward return values where possible. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26 12:56:21 +02:00
int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data);
int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val);
net: dsa: microchip: lan937x: add MTU and fast_age support This patch add the support for port_max_mtu, port_change_mtu and port_fast_age dsa functionality. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 20:39:54 +05:30
int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu);
net: dsa: microchip: lan937x: add phylink_get_caps support The internal phy of the LAN937x are capable of 100Mbps Full duplex. The xMII port of switch is capable of 10Mbps Full & Half Duplex, 100Mbps Full & Half Duplex and 1000Mbps Half duplex. xMII port also supports Tx and Rx Flow control. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 20:40:34 +05:30
void lan937x_phylink_get_caps(struct ksz_device *dev, int port,
struct phylink_config *config);
net: dsa: microchip: apply rgmii tx and rx delay in phylink mac config This patch read the rgmii tx and rx delay from device tree and stored it in the ksz_port. It applies the rgmii delay to the xmii tune adjust register based on the interface selected in phylink mac config. There are two rgmii port in LAN937x and value to be loaded in the register vary depends on the port selected. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-24 14:58:20 +05:30
void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port);
net: dsa: microchip: add the support for set_ageing_time KSZ9477 has the 11 bit ageing count value which is split across the two registers. And LAN937x has the 20 bit ageing count which is also split into two registers. Each count in the registers represents 1 second. This patch add the support for ageing time for KSZ9477 and LAN937x series of switch. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07 12:50:39 +05:30
int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs);
net: dsa: microchip: add support for credit based shaper KSZ9477, KSZ9567, KSZ9563, KSZ8563 and LAN937x supports Credit based shaper. To differentiate the chip supporting cbs, tc_cbs_supported flag is introduced in ksz_chip_data. And KSZ series has 16bit Credit increment registers whereas LAN937x has 24bit register. The value to be programmed in the credit increment is determined using the successive multiplication method to convert decimal fraction to hexadecimal fraction. For example: if idleslope is 10000 and sendslope is -90000, then bandwidth is 10000 - (-90000) = 100000. The 10% bandwidth of 100Mbps means 10/100 = 0.1(decimal). This value has to be converted to hexa. 1) 0.1 * 16 = 1.6 --> fraction 0.6 Carry = 1 (MSB) 2) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 3) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 4) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 5) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 6) 0.6 * 16 = 9.6 --> fraction 0.6 Carry = 9 (LSB) Now 0.1(decimal) becomes 0.199999(Hex). If it is LAN937x, 24 bit value will be programmed to Credit Inc register, 0x199999. For others 16 bit value will be prgrammed, 0x1999. Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-20 10:51:35 +05:30
int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val);
net: dsa: microchip: add DSA support for microchip LAN937x Basic DSA driver support for lan937x and the device will be configured through SPI interface. It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the functionality of ksz9477 series switch. drivers/net/dsa/microchip/ path is already part of MAINTAINERS & the new files come under this path. Hence no update needed to the MAINTAINERS Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 20:31:46 +05:30
#endif
Reference in a new issue Copy permalink