linux/arch/x86/kernel/apic/local.h

82 lines
2.4 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Historical copyright notices:
*
* Copyright 2004 James Cleverdon, IBM.
* (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
* (c) 1998-99, 2000 Ingo Molnar <mingo@redhat.com>
* (c) 2002,2003 Andi Kleen, SuSE Labs.
*/
#include <linux/jump_label.h>
#include <asm/irq_vectors.h>
#include <asm/apic.h>
/* X2APIC */
void __x2apic_send_IPI_dest(unsigned int apicid, int vector, unsigned int dest);
u32 x2apic_get_apic_id(u32 id);
void x2apic_send_IPI_all(int vector);
void x2apic_send_IPI_allbutself(int vector);
void x2apic_send_IPI_self(int vector);
extern u32 x2apic_max_apicid;
/* IPI */
DECLARE_STATIC_KEY_FALSE(apic_use_ipi_shorthand);
static inline unsigned int __prepare_ICR(unsigned int shortcut, int vector,
unsigned int dest)
{
unsigned int icr = shortcut | dest;
switch (vector) {
default:
icr |= APIC_DM_FIXED | vector;
break;
case NMI_VECTOR:
icr |= APIC_DM_NMI;
break;
}
return icr;
}
void default_init_apic_ldr(void);
void apic_mem_wait_icr_idle(void);
u32 apic_mem_wait_icr_idle_timeout(void);
/*
* This is used to send an IPI with no shorthand notation (the destination is
* specified in bits 56 to 63 of the ICR).
*/
void __default_send_IPI_dest_field(unsigned int mask, int vector, unsigned int dest);
void default_send_IPI_single(int cpu, int vector);
void default_send_IPI_single_phys(int cpu, int vector);
void default_send_IPI_mask_sequence_phys(const struct cpumask *mask, int vector);
void default_send_IPI_mask_allbutself_phys(const struct cpumask *mask, int vector);
void default_send_IPI_allbutself(int vector);
void default_send_IPI_all(int vector);
void default_send_IPI_self(int vector);
#ifdef CONFIG_X86_32
void default_send_IPI_mask_sequence_logical(const struct cpumask *mask, int vector);
void default_send_IPI_mask_allbutself_logical(const struct cpumask *mask, int vector);
void default_send_IPI_mask_logical(const struct cpumask *mask, int vector);
x86/apic/32: Decrapify the def_bigsmp mechanism If the system has more than 8 CPUs then XAPIC and the bigsmp APIC driver is required. This is ensured via: 1) Enumerating all possible CPUs up to NR_CPUS 2) Checking at boot CPU APIC setup time whether the system has more than 8 CPUs and has an XAPIC. If that's the case then it's attempted to install the bigsmp APIC driver and a magic variable 'def_to_bigsmp' is set to one. 3) If that magic variable is set and CONFIG_X86_BIGSMP=n and the system has more than 8 CPUs smp_sanity_check() removes all CPUs >= #8 from the present and possible mask in the most convoluted way. This logic is completely broken for the case where the bigsmp driver is enabled, but not selected due to a command line option specifying the default APIC. In that case the system boots with default APIC in logical destination mode and fails to reduce the number of CPUs. That aside the above which is sprinkled over 3 different places is yet another piece of art. It would have been too obvious to check the requirements upfront and limit nr_cpu_ids _before_ enumerating tons of CPUs and then removing them again. Implement exactly this. Check the bigsmp requirement when the boot APIC is registered which happens _before_ ACPI/MPTABLE parsing and limit the number of CPUs to 8 if it can't be used. Switch it over when the boot CPU apic is set up if necessary. [ dhansen: fix nr_cpu_ids off-by-one in default_setup_apic_routing() ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-08-08 15:03:56 -07:00
void x86_32_probe_bigsmp_early(void);
void x86_32_install_bigsmp(void);
x86/apic/32: Decrapify the def_bigsmp mechanism If the system has more than 8 CPUs then XAPIC and the bigsmp APIC driver is required. This is ensured via: 1) Enumerating all possible CPUs up to NR_CPUS 2) Checking at boot CPU APIC setup time whether the system has more than 8 CPUs and has an XAPIC. If that's the case then it's attempted to install the bigsmp APIC driver and a magic variable 'def_to_bigsmp' is set to one. 3) If that magic variable is set and CONFIG_X86_BIGSMP=n and the system has more than 8 CPUs smp_sanity_check() removes all CPUs >= #8 from the present and possible mask in the most convoluted way. This logic is completely broken for the case where the bigsmp driver is enabled, but not selected due to a command line option specifying the default APIC. In that case the system boots with default APIC in logical destination mode and fails to reduce the number of CPUs. That aside the above which is sprinkled over 3 different places is yet another piece of art. It would have been too obvious to check the requirements upfront and limit nr_cpu_ids _before_ enumerating tons of CPUs and then removing them again. Implement exactly this. Check the bigsmp requirement when the boot APIC is registered which happens _before_ ACPI/MPTABLE parsing and limit the number of CPUs to 8 if it can't be used. Switch it over when the boot CPU apic is set up if necessary. [ dhansen: fix nr_cpu_ids off-by-one in default_setup_apic_routing() ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-08-08 15:03:56 -07:00
#else
static inline void x86_32_probe_bigsmp_early(void) { }
static inline void x86_32_install_bigsmp(void) { }
x86/apic/32: Decrapify the def_bigsmp mechanism If the system has more than 8 CPUs then XAPIC and the bigsmp APIC driver is required. This is ensured via: 1) Enumerating all possible CPUs up to NR_CPUS 2) Checking at boot CPU APIC setup time whether the system has more than 8 CPUs and has an XAPIC. If that's the case then it's attempted to install the bigsmp APIC driver and a magic variable 'def_to_bigsmp' is set to one. 3) If that magic variable is set and CONFIG_X86_BIGSMP=n and the system has more than 8 CPUs smp_sanity_check() removes all CPUs >= #8 from the present and possible mask in the most convoluted way. This logic is completely broken for the case where the bigsmp driver is enabled, but not selected due to a command line option specifying the default APIC. In that case the system boots with default APIC in logical destination mode and fails to reduce the number of CPUs. That aside the above which is sprinkled over 3 different places is yet another piece of art. It would have been too obvious to check the requirements upfront and limit nr_cpu_ids _before_ enumerating tons of CPUs and then removing them again. Implement exactly this. Check the bigsmp requirement when the boot APIC is registered which happens _before_ ACPI/MPTABLE parsing and limit the number of CPUs to 8 if it can't be used. Switch it over when the boot CPU apic is set up if necessary. [ dhansen: fix nr_cpu_ids off-by-one in default_setup_apic_routing() ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Michael Kelley <mikelley@microsoft.com> Tested-by: Sohil Mehta <sohil.mehta@intel.com> Tested-by: Juergen Gross <jgross@suse.com> # Xen PV (dom0 and unpriv. guest)
2023-08-08 15:03:56 -07:00
#endif
#ifdef CONFIG_X86_BIGSMP
bool apic_bigsmp_possible(bool cmdline_selected);
void apic_bigsmp_force(void);
#else
static inline bool apic_bigsmp_possible(bool cmdline_selected) { return false; };
static inline void apic_bigsmp_force(void) { }
#endif