linux/arch/s390/boot/physmem_info.c

329 lines
9 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
#include <linux/processor.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <asm/physmem_info.h>
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
#include <asm/stacktrace.h>
#include <asm/boot_data.h>
#include <asm/sparsemem.h>
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sclp.h>
#include <asm/uv.h>
#include "decompressor.h"
#include "boot.h"
struct physmem_info __bootdata(physmem_info);
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
static unsigned int physmem_alloc_ranges;
static unsigned long physmem_alloc_pos;
/* up to 256 storage elements, 1020 subincrements each */
#define ENTRIES_EXTENDED_MAX \
(256 * (1020 / 2) * sizeof(struct physmem_range))
static struct physmem_range *__get_physmem_range_ptr(u32 n)
{
if (n < MEM_INLINED_ENTRIES)
return &physmem_info.online[n];
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
if (unlikely(!physmem_info.online_extended)) {
physmem_info.online_extended = (struct physmem_range *)physmem_alloc_range(
RR_MEM_DETECT_EXTENDED, ENTRIES_EXTENDED_MAX, sizeof(long), 0,
physmem_alloc_pos, true);
}
return &physmem_info.online_extended[n - MEM_INLINED_ENTRIES];
}
/*
* sequential calls to add_physmem_online_range with adjacent memory ranges
* are merged together into single memory range.
*/
void add_physmem_online_range(u64 start, u64 end)
{
struct physmem_range *range;
if (physmem_info.range_count) {
range = __get_physmem_range_ptr(physmem_info.range_count - 1);
if (range->end == start) {
range->end = end;
return;
}
}
range = __get_physmem_range_ptr(physmem_info.range_count);
range->start = start;
range->end = end;
physmem_info.range_count++;
}
static int __diag260(unsigned long rx1, unsigned long rx2)
{
unsigned long reg1, reg2, ry;
union register_pair rx;
psw_t old;
int rc;
rx.even = rx1;
rx.odd = rx2;
ry = 0x10; /* storage configuration */
rc = -1; /* fail */
asm volatile(
" mvc 0(16,%[psw_old]),0(%[psw_pgm])\n"
" epsw %[reg1],%[reg2]\n"
" st %[reg1],0(%[psw_pgm])\n"
" st %[reg2],4(%[psw_pgm])\n"
" larl %[reg1],1f\n"
" stg %[reg1],8(%[psw_pgm])\n"
" diag %[rx],%[ry],0x260\n"
" ipm %[rc]\n"
" srl %[rc],28\n"
"1: mvc 0(16,%[psw_pgm]),0(%[psw_old])\n"
: [reg1] "=&d" (reg1),
[reg2] "=&a" (reg2),
[rc] "+&d" (rc),
[ry] "+&d" (ry),
"+Q" (S390_lowcore.program_new_psw),
"=Q" (old)
: [rx] "d" (rx.pair),
[psw_old] "a" (&old),
[psw_pgm] "a" (&S390_lowcore.program_new_psw)
: "cc", "memory");
return rc == 0 ? ry : -1;
}
static int diag260(void)
{
int rc, i;
struct {
unsigned long start;
unsigned long end;
} storage_extents[8] __aligned(16); /* VM supports up to 8 extends */
memset(storage_extents, 0, sizeof(storage_extents));
rc = __diag260((unsigned long)storage_extents, sizeof(storage_extents));
if (rc == -1)
return -1;
for (i = 0; i < min_t(int, rc, ARRAY_SIZE(storage_extents)); i++)
add_physmem_online_range(storage_extents[i].start, storage_extents[i].end + 1);
return 0;
}
static int tprot(unsigned long addr)
{
unsigned long reg1, reg2;
int rc = -EFAULT;
psw_t old;
asm volatile(
" mvc 0(16,%[psw_old]),0(%[psw_pgm])\n"
" epsw %[reg1],%[reg2]\n"
" st %[reg1],0(%[psw_pgm])\n"
" st %[reg2],4(%[psw_pgm])\n"
" larl %[reg1],1f\n"
" stg %[reg1],8(%[psw_pgm])\n"
" tprot 0(%[addr]),0\n"
" ipm %[rc]\n"
" srl %[rc],28\n"
"1: mvc 0(16,%[psw_pgm]),0(%[psw_old])\n"
: [reg1] "=&d" (reg1),
[reg2] "=&a" (reg2),
[rc] "+&d" (rc),
"=Q" (S390_lowcore.program_new_psw.addr),
"=Q" (old)
: [psw_old] "a" (&old),
[psw_pgm] "a" (&S390_lowcore.program_new_psw),
[addr] "a" (addr)
: "cc", "memory");
return rc;
}
static unsigned long search_mem_end(void)
{
unsigned long range = 1 << (MAX_PHYSMEM_BITS - 20); /* in 1MB blocks */
unsigned long offset = 0;
unsigned long pivot;
while (range > 1) {
range >>= 1;
pivot = offset + range;
if (!tprot(pivot << 20))
offset = pivot;
}
return (offset + 1) << 20;
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
unsigned long detect_max_physmem_end(void)
{
unsigned long max_physmem_end = 0;
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
if (!sclp_early_get_memsize(&max_physmem_end)) {
physmem_info.info_source = MEM_DETECT_SCLP_READ_INFO;
} else {
max_physmem_end = search_mem_end();
physmem_info.info_source = MEM_DETECT_BIN_SEARCH;
}
return max_physmem_end;
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
void detect_physmem_online_ranges(unsigned long max_physmem_end)
{
if (!sclp_early_read_storage_info()) {
physmem_info.info_source = MEM_DETECT_SCLP_STOR_INFO;
} else if (!diag260()) {
physmem_info.info_source = MEM_DETECT_DIAG260;
} else if (max_physmem_end) {
add_physmem_online_range(0, max_physmem_end);
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
void physmem_set_usable_limit(unsigned long limit)
{
physmem_info.usable = limit;
physmem_alloc_pos = limit;
}
static void die_oom(unsigned long size, unsigned long align, unsigned long min, unsigned long max)
{
unsigned long start, end, total_mem = 0, total_reserved_mem = 0;
struct reserved_range *range;
enum reserved_range_type t;
int i;
decompressor_printk("Linux version %s\n", kernel_version);
if (!is_prot_virt_guest() && early_command_line[0])
decompressor_printk("Kernel command line: %s\n", early_command_line);
decompressor_printk("Out of memory allocating %lx bytes %lx aligned in range %lx:%lx\n",
size, align, min, max);
decompressor_printk("Reserved memory ranges:\n");
for_each_physmem_reserved_range(t, range, &start, &end) {
decompressor_printk("%016lx %016lx %s\n", start, end, get_rr_type_name(t));
total_reserved_mem += end - start;
}
decompressor_printk("Usable online memory ranges (info source: %s [%x]):\n",
get_physmem_info_source(), physmem_info.info_source);
for_each_physmem_usable_range(i, &start, &end) {
decompressor_printk("%016lx %016lx\n", start, end);
total_mem += end - start;
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
decompressor_printk("Usable online memory total: %lx Reserved: %lx Free: %lx\n",
total_mem, total_reserved_mem,
total_mem > total_reserved_mem ? total_mem - total_reserved_mem : 0);
print_stacktrace(current_frame_address());
sclp_early_printk("\n\n -- System halted\n");
disabled_wait();
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
void physmem_reserve(enum reserved_range_type type, unsigned long addr, unsigned long size)
{
physmem_info.reserved[type].start = addr;
physmem_info.reserved[type].end = addr + size;
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
void physmem_free(enum reserved_range_type type)
{
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
physmem_info.reserved[type].start = 0;
physmem_info.reserved[type].end = 0;
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
static bool __physmem_alloc_intersects(unsigned long addr, unsigned long size,
unsigned long *intersection_start)
{
unsigned long res_addr, res_size;
int t;
for (t = 0; t < RR_MAX; t++) {
if (!get_physmem_reserved(t, &res_addr, &res_size))
continue;
if (intersects(addr, size, res_addr, res_size)) {
*intersection_start = res_addr;
return true;
}
}
return ipl_report_certs_intersects(addr, size, intersection_start);
}
static unsigned long __physmem_alloc_range(unsigned long size, unsigned long align,
unsigned long min, unsigned long max,
unsigned int from_ranges, unsigned int *ranges_left,
bool die_on_oom)
{
unsigned int nranges = from_ranges ?: physmem_info.range_count;
unsigned long range_start, range_end;
unsigned long intersection_start;
unsigned long addr, pos = max;
align = max(align, 8UL);
while (nranges) {
__get_physmem_range(nranges - 1, &range_start, &range_end, false);
pos = min(range_end, pos);
if (round_up(min, align) + size > pos)
break;
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
addr = round_down(pos - size, align);
if (range_start > addr) {
nranges--;
continue;
}
if (__physmem_alloc_intersects(addr, size, &intersection_start)) {
pos = intersection_start;
continue;
}
if (ranges_left)
*ranges_left = nranges;
return addr;
}
if (die_on_oom)
die_oom(size, align, min, max);
return 0;
}
unsigned long physmem_alloc_range(enum reserved_range_type type, unsigned long size,
unsigned long align, unsigned long min, unsigned long max,
bool die_on_oom)
{
unsigned long addr;
max = min(max, physmem_alloc_pos);
addr = __physmem_alloc_range(size, align, min, max, 0, NULL, die_on_oom);
if (addr)
physmem_reserve(type, addr, size);
return addr;
}
unsigned long physmem_alloc_top_down(enum reserved_range_type type, unsigned long size,
unsigned long align)
{
struct reserved_range *range = &physmem_info.reserved[type];
struct reserved_range *new_range;
unsigned int ranges_left;
unsigned long addr;
addr = __physmem_alloc_range(size, align, 0, physmem_alloc_pos, physmem_alloc_ranges,
&ranges_left, true);
/* if not a consecutive allocation of the same type or first allocation */
if (range->start != addr + size) {
if (range->end) {
physmem_alloc_pos = __physmem_alloc_range(
sizeof(struct reserved_range), 0, 0, physmem_alloc_pos,
physmem_alloc_ranges, &ranges_left, true);
new_range = (struct reserved_range *)physmem_alloc_pos;
*new_range = *range;
range->chain = new_range;
addr = __physmem_alloc_range(size, align, 0, physmem_alloc_pos,
ranges_left, &ranges_left, true);
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
range->end = addr + size;
}
s390/boot: rework decompressor reserved tracking Currently several approaches for finding unused memory in decompressor are utilized. While "safe_addr" grows towards higher addresses, vmem code allocates paging structures top down. The former requires careful ordering. In addition to that ipl report handling code verifies potential intersections with secure boot certificates on its own. Neither of two approaches are memory holes aware and consistent with each other in low memory conditions. To solve that, existing approaches are generalized and combined together, as well as online memory ranges are now taken into consideration. physmem_info has been extended to contain reserved memory ranges. New set of functions allow to handle reserves and find unused memory. All reserves and memory allocations are "typed". In case of out of memory condition decompressor fails with detailed info on current reserved ranges and usable online memory. Linux version 6.2.0 ... Kernel command line: ... mem=100M Our of memory allocating 100000 bytes 100000 aligned in range 0:5800000 Reserved memory ranges: 0000000000000000 0000000003e33000 DECOMPRESSOR 0000000003f00000 00000000057648a3 INITRD 00000000063e0000 00000000063e8000 VMEM 00000000063eb000 00000000063f4000 VMEM 00000000063f7800 0000000006400000 VMEM 0000000005800000 0000000006300000 KASAN Usable online memory ranges (info source: sclp read info [3]): 0000000000000000 0000000006400000 Usable online memory total: 6400000 Reserved: 61b10a3 Free: 24ef5d Call Trace: (sp:000000000002bd58 [<0000000000012a70>] physmem_alloc_top_down+0x60/0x14c) sp:000000000002bdc8 [<0000000000013756>] _pa+0x56/0x6a sp:000000000002bdf0 [<0000000000013bcc>] pgtable_populate+0x45c/0x65e sp:000000000002be90 [<00000000000140aa>] setup_vmem+0x2da/0x424 sp:000000000002bec8 [<0000000000011c20>] startup_kernel+0x428/0x8b4 sp:000000000002bf60 [<00000000000100f4>] startup_normal+0xd4/0xd4 physmem_alloc_range allows to find free memory in specified range. It should be used for one time allocations only like finding position for amode31 and vmlinux. physmem_alloc_top_down can be used just like physmem_alloc_range, but it also allows multiple allocations per type and tries to merge sequential allocations together. Which is useful for paging structures allocations. If sequential allocations cannot be merged together they are "chained", allowing easy per type reserved ranges enumeration and migration to memblock later. Extra "struct reserved_range" allocated for chaining are not tracked or reserved but rely on the fact that both physmem_alloc_range and physmem_alloc_top_down search for free memory only below current top down allocator position. All reserved ranges should be transferred to memblock before memblock allocations are enabled. The startup code has been reordered to delay any memory allocations until online memory ranges are detected and occupied memory ranges are marked as reserved to be excluded from follow-up allocations. Ipl report certificates are a special case, ipl report certificates list is checked together with other memory reserves until certificates are saved elsewhere. KASAN required memory for shadow memory allocation and mapping is reserved as 1 large chunk which is later passed to KASAN early initialization code. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2023-02-02 13:59:36 +01:00
range->start = addr;
physmem_alloc_pos = addr;
physmem_alloc_ranges = ranges_left;
return addr;
}
unsigned long get_physmem_alloc_pos(void)
{
return physmem_alloc_pos;
}