linux/security/integrity/evm/evm_main.c

838 lines
22 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/*
* Copyright (C) 2005-2010 IBM Corporation
*
* Author:
* Mimi Zohar <zohar@us.ibm.com>
* Kylene Hall <kjhall@us.ibm.com>
*
* File: evm_main.c
* implements evm_inode_setxattr, evm_inode_post_setxattr,
* evm_inode_removexattr, and evm_verifyxattr
*/
#include <linux/init.h>
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#include <linux/crypto.h>
#include <linux/audit.h>
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#include <linux/xattr.h>
#include <linux/integrity.h>
#include <linux/evm.h>
#include <linux/magic.h>
evm: Allow setxattr() and setattr() for unmodified metadata With the patch to allow xattr/attr operations if a portable signature verification fails, cp and tar can copy all xattrs/attrs so that at the end of the process verification succeeds. However, it might happen that the xattrs/attrs are already set to the correct value (taken at signing time) and signature verification succeeds before the copy has completed. For example, an archive might contains files owned by root and the archive is extracted by root. Then, since portable signatures are immutable, all subsequent operations fail (e.g. fchown()), even if the operation is legitimate (does not alter the current value). This patch avoids this problem by reporting successful operation to user space when that operation does not alter the current value of xattrs/attrs. With this patch, the one that introduces evm_hmac_disabled() and the one that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM portable signatures can be used without disabling metadata verification (by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata verification enabled, altering immutable metadata protected with a portable signature that was successfully verified will be denied (existing behavior). Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function] Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-14 17:27:49 +02:00
#include <linux/posix_acl_xattr.h>
#include <crypto/hash.h>
#include <crypto/hash_info.h>
#include <crypto/algapi.h>
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#include "evm.h"
int evm_initialized;
static const char * const integrity_status_msg[] = {
"pass", "pass_immutable", "fail", "fail_immutable", "no_label",
"no_xattrs", "unknown"
};
int evm_hmac_attrs;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
static struct xattr_list evm_config_default_xattrnames[] = {
{.name = XATTR_NAME_SELINUX,
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#ifdef CONFIG_SECURITY_SELINUX
.enabled = true
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#endif
},
{.name = XATTR_NAME_SMACK,
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#ifdef CONFIG_SECURITY_SMACK
.enabled = true
#endif
},
{.name = XATTR_NAME_SMACKEXEC,
#ifdef CONFIG_EVM_EXTRA_SMACK_XATTRS
.enabled = true
#endif
},
{.name = XATTR_NAME_SMACKTRANSMUTE,
#ifdef CONFIG_EVM_EXTRA_SMACK_XATTRS
.enabled = true
#endif
},
{.name = XATTR_NAME_SMACKMMAP,
#ifdef CONFIG_EVM_EXTRA_SMACK_XATTRS
.enabled = true
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 10:15:05 -05:00
#endif
},
{.name = XATTR_NAME_APPARMOR,
#ifdef CONFIG_SECURITY_APPARMOR
.enabled = true
#endif
},
{.name = XATTR_NAME_IMA,
ima: integrity appraisal extension IMA currently maintains an integrity measurement list used to assert the integrity of the running system to a third party. The IMA-appraisal extension adds local integrity validation and enforcement of the measurement against a "good" value stored as an extended attribute 'security.ima'. The initial methods for validating 'security.ima' are hashed based, which provides file data integrity, and digital signature based, which in addition to providing file data integrity, provides authenticity. This patch creates and maintains the 'security.ima' xattr, containing the file data hash measurement. Protection of the xattr is provided by EVM, if enabled and configured. Based on policy, IMA calls evm_verifyxattr() to verify a file's metadata integrity and, assuming success, compares the file's current hash value with the one stored as an extended attribute in 'security.ima'. Changelov v4: - changed iint cache flags to hex values Changelog v3: - change appraisal default for filesystems without xattr support to fail Changelog v2: - fix audit msg 'res' value - removed unused 'ima_appraise=' values Changelog v1: - removed unused iint mutex (Dmitry Kasatkin) - setattr hook must not reset appraised (Dmitry Kasatkin) - evm_verifyxattr() now differentiates between no 'security.evm' xattr (INTEGRITY_NOLABEL) and no EVM 'protected' xattrs included in the 'security.evm' (INTEGRITY_NOXATTRS). - replace hash_status with ima_status (Dmitry Kasatkin) - re-initialize slab element ima_status on free (Dmitry Kasatkin) - include 'security.ima' in EVM if CONFIG_IMA_APPRAISE, not CONFIG_IMA - merged half "ima: ima_must_appraise_or_measure API change" (Dmitry Kasatkin) - removed unnecessary error variable in process_measurement() (Dmitry Kasatkin) - use ima_inode_post_setattr() stub function, if IMA_APPRAISE not configured (moved ima_inode_post_setattr() to ima_appraise.c) - make sure ima_collect_measurement() can read file Changelog: - add 'iint' to evm_verifyxattr() call (Dimitry Kasatkin) - fix the race condition between chmod, which takes the i_mutex and then iint->mutex, and ima_file_free() and process_measurement(), which take the locks in the reverse order, by eliminating iint->mutex. (Dmitry Kasatkin) - cleanup of ima_appraise_measurement() (Dmitry Kasatkin) - changes as a result of the iint not allocated for all regular files, but only for those measured/appraised. - don't try to appraise new/empty files - expanded ima_appraisal description in ima/Kconfig - IMA appraise definitions required even if IMA_APPRAISE not enabled - add return value to ima_must_appraise() stub - unconditionally set status = INTEGRITY_PASS *after* testing status, not before. (Found by Joe Perches) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
2012-02-13 10:15:05 -05:00
#ifdef CONFIG_IMA_APPRAISE
.enabled = true
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
#endif
},
{.name = XATTR_NAME_CAPS,
.enabled = true
},
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
};
LIST_HEAD(evm_config_xattrnames);
static int evm_fixmode;
static int __init evm_set_fixmode(char *str)
{
if (strncmp(str, "fix", 3) == 0)
evm_fixmode = 1;
else
pr_err("invalid \"%s\" mode", str);
return 0;
}
__setup("evm=", evm_set_fixmode);
static void __init evm_init_config(void)
{
int i, xattrs;
xattrs = ARRAY_SIZE(evm_config_default_xattrnames);
pr_info("Initialising EVM extended attributes:\n");
for (i = 0; i < xattrs; i++) {
pr_info("%s%s\n", evm_config_default_xattrnames[i].name,
!evm_config_default_xattrnames[i].enabled ?
" (disabled)" : "");
list_add_tail(&evm_config_default_xattrnames[i].list,
&evm_config_xattrnames);
}
#ifdef CONFIG_EVM_ATTR_FSUUID
evm_hmac_attrs |= EVM_ATTR_FSUUID;
#endif
pr_info("HMAC attrs: 0x%x\n", evm_hmac_attrs);
}
static bool evm_key_loaded(void)
{
return (bool)(evm_initialized & EVM_KEY_MASK);
}
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
/*
* This function determines whether or not it is safe to ignore verification
* errors, based on the ability of EVM to calculate HMACs. If the HMAC key
* is not loaded, and it cannot be loaded in the future due to the
* EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the
* attrs/xattrs being found invalid will not make them valid.
*/
static bool evm_hmac_disabled(void)
{
if (evm_initialized & EVM_INIT_HMAC)
return false;
if (!(evm_initialized & EVM_SETUP_COMPLETE))
return false;
return true;
}
static int evm_find_protected_xattrs(struct dentry *dentry)
{
struct inode *inode = d_backing_inode(dentry);
struct xattr_list *xattr;
int error;
int count = 0;
if (!(inode->i_opflags & IOP_XATTR))
return -EOPNOTSUPP;
list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
error = __vfs_getxattr(dentry, inode, xattr->name, NULL, 0);
if (error < 0) {
if (error == -ENODATA)
continue;
return error;
}
count++;
}
return count;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/*
* evm_verify_hmac - calculate and compare the HMAC with the EVM xattr
*
* Compute the HMAC on the dentry's protected set of extended attributes
* and compare it against the stored security.evm xattr.
*
* For performance:
* - use the previoulsy retrieved xattr value and length to calculate the
* HMAC.)
* - cache the verification result in the iint, when available.
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
*
* Returns integrity status
*/
static enum integrity_status evm_verify_hmac(struct dentry *dentry,
const char *xattr_name,
char *xattr_value,
size_t xattr_value_len,
struct integrity_iint_cache *iint)
{
struct evm_ima_xattr_data *xattr_data = NULL;
struct signature_v2_hdr *hdr;
enum integrity_status evm_status = INTEGRITY_PASS;
struct evm_digest digest;
struct inode *inode;
int rc, xattr_len, evm_immutable = 0;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
if (iint && (iint->evm_status == INTEGRITY_PASS ||
iint->evm_status == INTEGRITY_PASS_IMMUTABLE))
return iint->evm_status;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/* if status is not PASS, try to check again - against -ENOMEM */
/* first need to know the sig type */
rc = vfs_getxattr_alloc(&init_user_ns, dentry, XATTR_NAME_EVM,
(char **)&xattr_data, 0, GFP_NOFS);
if (rc <= 0) {
evm_status = INTEGRITY_FAIL;
if (rc == -ENODATA) {
rc = evm_find_protected_xattrs(dentry);
if (rc > 0)
evm_status = INTEGRITY_NOLABEL;
else if (rc == 0)
evm_status = INTEGRITY_NOXATTRS; /* new file */
} else if (rc == -EOPNOTSUPP) {
evm_status = INTEGRITY_UNKNOWN;
}
goto out;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
xattr_len = rc;
/* check value type */
switch (xattr_data->type) {
case EVM_XATTR_HMAC:
if (xattr_len != sizeof(struct evm_xattr)) {
evm_status = INTEGRITY_FAIL;
goto out;
}
digest.hdr.algo = HASH_ALGO_SHA1;
rc = evm_calc_hmac(dentry, xattr_name, xattr_value,
xattr_value_len, &digest);
if (rc)
break;
rc = crypto_memneq(xattr_data->data, digest.digest,
SHA1_DIGEST_SIZE);
if (rc)
rc = -EINVAL;
break;
case EVM_XATTR_PORTABLE_DIGSIG:
evm_immutable = 1;
fallthrough;
case EVM_IMA_XATTR_DIGSIG:
/* accept xattr with non-empty signature field */
if (xattr_len <= sizeof(struct signature_v2_hdr)) {
evm_status = INTEGRITY_FAIL;
goto out;
}
hdr = (struct signature_v2_hdr *)xattr_data;
digest.hdr.algo = hdr->hash_algo;
rc = evm_calc_hash(dentry, xattr_name, xattr_value,
xattr_value_len, xattr_data->type, &digest);
if (rc)
break;
rc = integrity_digsig_verify(INTEGRITY_KEYRING_EVM,
(const char *)xattr_data, xattr_len,
digest.digest, digest.hdr.length);
if (!rc) {
inode = d_backing_inode(dentry);
if (xattr_data->type == EVM_XATTR_PORTABLE_DIGSIG) {
if (iint)
iint->flags |= EVM_IMMUTABLE_DIGSIG;
evm_status = INTEGRITY_PASS_IMMUTABLE;
} else if (!IS_RDONLY(inode) &&
!(inode->i_sb->s_readonly_remount) &&
!IS_IMMUTABLE(inode)) {
evm_update_evmxattr(dentry, xattr_name,
xattr_value,
xattr_value_len);
}
}
break;
default:
rc = -EINVAL;
break;
}
if (rc) {
if (rc == -ENODATA)
evm_status = INTEGRITY_NOXATTRS;
else if (evm_immutable)
evm_status = INTEGRITY_FAIL_IMMUTABLE;
else
evm_status = INTEGRITY_FAIL;
}
out:
if (iint)
iint->evm_status = evm_status;
kfree(xattr_data);
return evm_status;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
}
static int evm_protected_xattr_common(const char *req_xattr_name,
bool all_xattrs)
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
{
int namelen;
int found = 0;
struct xattr_list *xattr;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
namelen = strlen(req_xattr_name);
list_for_each_entry_lockless(xattr, &evm_config_xattrnames, list) {
if (!all_xattrs && !xattr->enabled)
continue;
if ((strlen(xattr->name) == namelen)
&& (strncmp(req_xattr_name, xattr->name, namelen) == 0)) {
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
found = 1;
break;
}
if (strncmp(req_xattr_name,
xattr->name + XATTR_SECURITY_PREFIX_LEN,
strlen(req_xattr_name)) == 0) {
found = 1;
break;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
return found;
}
static int evm_protected_xattr(const char *req_xattr_name)
{
return evm_protected_xattr_common(req_xattr_name, false);
}
int evm_protected_xattr_if_enabled(const char *req_xattr_name)
{
return evm_protected_xattr_common(req_xattr_name, true);
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/**
* evm_verifyxattr - verify the integrity of the requested xattr
* @dentry: object of the verify xattr
* @xattr_name: requested xattr
* @xattr_value: requested xattr value
* @xattr_value_len: requested xattr value length
*
* Calculate the HMAC for the given dentry and verify it against the stored
* security.evm xattr. For performance, use the xattr value and length
* previously retrieved to calculate the HMAC.
*
* Returns the xattr integrity status.
*
* This function requires the caller to lock the inode's i_mutex before it
* is executed.
*/
enum integrity_status evm_verifyxattr(struct dentry *dentry,
const char *xattr_name,
void *xattr_value, size_t xattr_value_len,
struct integrity_iint_cache *iint)
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
{
if (!evm_key_loaded() || !evm_protected_xattr(xattr_name))
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
return INTEGRITY_UNKNOWN;
if (!iint) {
iint = integrity_iint_find(d_backing_inode(dentry));
if (!iint)
return INTEGRITY_UNKNOWN;
}
return evm_verify_hmac(dentry, xattr_name, xattr_value,
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
xattr_value_len, iint);
}
EXPORT_SYMBOL_GPL(evm_verifyxattr);
/*
* evm_verify_current_integrity - verify the dentry's metadata integrity
* @dentry: pointer to the affected dentry
*
* Verify and return the dentry's metadata integrity. The exceptions are
* before EVM is initialized or in 'fix' mode.
*/
static enum integrity_status evm_verify_current_integrity(struct dentry *dentry)
{
struct inode *inode = d_backing_inode(dentry);
if (!evm_key_loaded() || !S_ISREG(inode->i_mode) || evm_fixmode)
return 0;
return evm_verify_hmac(dentry, NULL, NULL, 0, NULL);
}
evm: Allow setxattr() and setattr() for unmodified metadata With the patch to allow xattr/attr operations if a portable signature verification fails, cp and tar can copy all xattrs/attrs so that at the end of the process verification succeeds. However, it might happen that the xattrs/attrs are already set to the correct value (taken at signing time) and signature verification succeeds before the copy has completed. For example, an archive might contains files owned by root and the archive is extracted by root. Then, since portable signatures are immutable, all subsequent operations fail (e.g. fchown()), even if the operation is legitimate (does not alter the current value). This patch avoids this problem by reporting successful operation to user space when that operation does not alter the current value of xattrs/attrs. With this patch, the one that introduces evm_hmac_disabled() and the one that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM portable signatures can be used without disabling metadata verification (by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata verification enabled, altering immutable metadata protected with a portable signature that was successfully verified will be denied (existing behavior). Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function] Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-14 17:27:49 +02:00
/*
* evm_xattr_acl_change - check if passed ACL changes the inode mode
* @mnt_userns: user namespace of the idmapped mount
* @dentry: pointer to the affected dentry
* @xattr_name: requested xattr
* @xattr_value: requested xattr value
* @xattr_value_len: requested xattr value length
*
* Check if passed ACL changes the inode mode, which is protected by EVM.
*
* Returns 1 if passed ACL causes inode mode change, 0 otherwise.
*/
static int evm_xattr_acl_change(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
#ifdef CONFIG_FS_POSIX_ACL
umode_t mode;
struct posix_acl *acl = NULL, *acl_res;
struct inode *inode = d_backing_inode(dentry);
int rc;
/*
* user_ns is not relevant here, ACL_USER/ACL_GROUP don't have impact
* on the inode mode (see posix_acl_equiv_mode()).
*/
acl = posix_acl_from_xattr(&init_user_ns, xattr_value, xattr_value_len);
if (IS_ERR_OR_NULL(acl))
return 1;
acl_res = acl;
/*
* Passing mnt_userns is necessary to correctly determine the GID in
* an idmapped mount, as the GID is used to clear the setgid bit in
* the inode mode.
*/
rc = posix_acl_update_mode(mnt_userns, inode, &mode, &acl_res);
posix_acl_release(acl);
if (rc)
return 1;
if (inode->i_mode != mode)
return 1;
#endif
return 0;
}
/*
* evm_xattr_change - check if passed xattr value differs from current value
* @mnt_userns: user namespace of the idmapped mount
* @dentry: pointer to the affected dentry
* @xattr_name: requested xattr
* @xattr_value: requested xattr value
* @xattr_value_len: requested xattr value length
*
* Check if passed xattr value differs from current value.
*
* Returns 1 if passed xattr value differs from current value, 0 otherwise.
*/
static int evm_xattr_change(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
char *xattr_data = NULL;
int rc = 0;
if (posix_xattr_acl(xattr_name))
return evm_xattr_acl_change(mnt_userns, dentry, xattr_name,
xattr_value, xattr_value_len);
rc = vfs_getxattr_alloc(&init_user_ns, dentry, xattr_name, &xattr_data,
0, GFP_NOFS);
if (rc < 0)
return 1;
if (rc == xattr_value_len)
rc = !!memcmp(xattr_value, xattr_data, rc);
else
rc = 1;
kfree(xattr_data);
return rc;
}
/*
* evm_protect_xattr - protect the EVM extended attribute
*
* Prevent security.evm from being modified or removed without the
* necessary permissions or when the existing value is invalid.
*
* The posix xattr acls are 'system' prefixed, which normally would not
* affect security.evm. An interesting side affect of writing posix xattr
* acls is their modifying of the i_mode, which is included in security.evm.
* For posix xattr acls only, permit security.evm, even if it currently
* doesn't exist, to be updated unless the EVM signature is immutable.
*/
static int evm_protect_xattr(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
enum integrity_status evm_status;
if (strcmp(xattr_name, XATTR_NAME_EVM) == 0) {
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
} else if (!evm_protected_xattr(xattr_name)) {
if (!posix_xattr_acl(xattr_name))
return 0;
evm_status = evm_verify_current_integrity(dentry);
if ((evm_status == INTEGRITY_PASS) ||
(evm_status == INTEGRITY_NOXATTRS))
return 0;
goto out;
}
evm_status = evm_verify_current_integrity(dentry);
if (evm_status == INTEGRITY_NOXATTRS) {
struct integrity_iint_cache *iint;
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
/* Exception if the HMAC is not going to be calculated. */
if (evm_hmac_disabled())
return 0;
iint = integrity_iint_find(d_backing_inode(dentry));
if (iint && (iint->flags & IMA_NEW_FILE))
return 0;
/* exception for pseudo filesystems */
if (dentry->d_sb->s_magic == TMPFS_MAGIC
|| dentry->d_sb->s_magic == SYSFS_MAGIC)
return 0;
integrity_audit_msg(AUDIT_INTEGRITY_METADATA,
dentry->d_inode, dentry->d_name.name,
"update_metadata",
integrity_status_msg[evm_status],
-EPERM, 0);
}
out:
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
/* Exception if the HMAC is not going to be calculated. */
if (evm_hmac_disabled() && (evm_status == INTEGRITY_NOLABEL ||
evm_status == INTEGRITY_UNKNOWN))
return 0;
/*
* Writing other xattrs is safe for portable signatures, as portable
* signatures are immutable and can never be updated.
*/
if (evm_status == INTEGRITY_FAIL_IMMUTABLE)
return 0;
evm: Allow setxattr() and setattr() for unmodified metadata With the patch to allow xattr/attr operations if a portable signature verification fails, cp and tar can copy all xattrs/attrs so that at the end of the process verification succeeds. However, it might happen that the xattrs/attrs are already set to the correct value (taken at signing time) and signature verification succeeds before the copy has completed. For example, an archive might contains files owned by root and the archive is extracted by root. Then, since portable signatures are immutable, all subsequent operations fail (e.g. fchown()), even if the operation is legitimate (does not alter the current value). This patch avoids this problem by reporting successful operation to user space when that operation does not alter the current value of xattrs/attrs. With this patch, the one that introduces evm_hmac_disabled() and the one that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM portable signatures can be used without disabling metadata verification (by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata verification enabled, altering immutable metadata protected with a portable signature that was successfully verified will be denied (existing behavior). Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function] Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-14 17:27:49 +02:00
if (evm_status == INTEGRITY_PASS_IMMUTABLE &&
!evm_xattr_change(mnt_userns, dentry, xattr_name, xattr_value,
xattr_value_len))
return 0;
if (evm_status != INTEGRITY_PASS &&
evm_status != INTEGRITY_PASS_IMMUTABLE)
integrity_audit_msg(AUDIT_INTEGRITY_METADATA, d_backing_inode(dentry),
dentry->d_name.name, "appraise_metadata",
integrity_status_msg[evm_status],
-EPERM, 0);
return evm_status == INTEGRITY_PASS ? 0 : -EPERM;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/**
* evm_inode_setxattr - protect the EVM extended attribute
* @mnt_userns: user namespace of the idmapped mount
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
* @xattr_value: pointer to the new extended attribute value
* @xattr_value_len: pointer to the new extended attribute value length
*
* Before allowing the 'security.evm' protected xattr to be updated,
* verify the existing value is valid. As only the kernel should have
* access to the EVM encrypted key needed to calculate the HMAC, prevent
* userspace from writing HMAC value. Writing 'security.evm' requires
* requires CAP_SYS_ADMIN privileges.
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
*/
int evm_inode_setxattr(struct user_namespace *mnt_userns, struct dentry *dentry,
const char *xattr_name, const void *xattr_value,
size_t xattr_value_len)
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
{
const struct evm_ima_xattr_data *xattr_data = xattr_value;
/* Policy permits modification of the protected xattrs even though
* there's no HMAC key loaded
*/
if (evm_initialized & EVM_ALLOW_METADATA_WRITES)
return 0;
evm: check xattr value length and type in evm_inode_setxattr() evm_inode_setxattr() can be called with no value. The function does not check the length so that following command can be used to produce the kernel oops: setfattr -n security.evm FOO. This patch fixes it. Changes in v3: * there is no reason to return different error codes for EVM_XATTR_HMAC and non EVM_XATTR_HMAC. Remove unnecessary test then. Changes in v2: * testing for validity of xattr type [ 1106.396921] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1106.398192] IP: [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.399244] PGD 29048067 PUD 290d7067 PMD 0 [ 1106.399953] Oops: 0000 [#1] SMP [ 1106.400020] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse [ 1106.400020] CPU: 0 PID: 3635 Comm: setxattr Not tainted 3.16.0-kds+ #2936 [ 1106.400020] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 1106.400020] task: ffff8800291a0000 ti: ffff88002917c000 task.ti: ffff88002917c000 [ 1106.400020] RIP: 0010:[<ffffffff812af7b8>] [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.400020] RSP: 0018:ffff88002917fd50 EFLAGS: 00010246 [ 1106.400020] RAX: 0000000000000000 RBX: ffff88002917fdf8 RCX: 0000000000000000 [ 1106.400020] RDX: 0000000000000000 RSI: ffffffff818136d3 RDI: ffff88002917fdf8 [ 1106.400020] RBP: ffff88002917fd68 R08: 0000000000000000 R09: 00000000003ec1df [ 1106.400020] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800438a0a00 [ 1106.400020] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 1106.400020] FS: 00007f7dfa7d7740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000 [ 1106.400020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1106.400020] CR2: 0000000000000000 CR3: 000000003763e000 CR4: 00000000000006f0 [ 1106.400020] Stack: [ 1106.400020] ffff8800438a0a00 ffff88002917fdf8 0000000000000000 ffff88002917fd98 [ 1106.400020] ffffffff812a1030 ffff8800438a0a00 ffff88002917fdf8 0000000000000000 [ 1106.400020] 0000000000000000 ffff88002917fde0 ffffffff8116d08a ffff88002917fdc8 [ 1106.400020] Call Trace: [ 1106.400020] [<ffffffff812a1030>] security_inode_setxattr+0x5d/0x6a [ 1106.400020] [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f [ 1106.400020] [<ffffffff8116d1e0>] setxattr+0x122/0x16c [ 1106.400020] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 1106.400020] [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143 [ 1106.400020] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 1106.400020] [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f [ 1106.400020] [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0 [ 1106.400020] [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b [ 1106.400020] Code: c3 0f 1f 44 00 00 55 48 89 e5 41 55 49 89 d5 41 54 49 89 fc 53 48 89 f3 48 c7 c6 d3 36 81 81 48 89 df e8 18 22 04 00 85 c0 75 07 <41> 80 7d 00 02 74 0d 48 89 de 4c 89 e7 e8 5a fe ff ff eb 03 83 [ 1106.400020] RIP [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.400020] RSP <ffff88002917fd50> [ 1106.400020] CR2: 0000000000000000 [ 1106.428061] ---[ end trace ae08331628ba3050 ]--- Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-10-28 14:28:49 +02:00
if (strcmp(xattr_name, XATTR_NAME_EVM) == 0) {
if (!xattr_value_len)
return -EINVAL;
if (xattr_data->type != EVM_IMA_XATTR_DIGSIG &&
xattr_data->type != EVM_XATTR_PORTABLE_DIGSIG)
evm: check xattr value length and type in evm_inode_setxattr() evm_inode_setxattr() can be called with no value. The function does not check the length so that following command can be used to produce the kernel oops: setfattr -n security.evm FOO. This patch fixes it. Changes in v3: * there is no reason to return different error codes for EVM_XATTR_HMAC and non EVM_XATTR_HMAC. Remove unnecessary test then. Changes in v2: * testing for validity of xattr type [ 1106.396921] BUG: unable to handle kernel NULL pointer dereference at (null) [ 1106.398192] IP: [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.399244] PGD 29048067 PUD 290d7067 PMD 0 [ 1106.399953] Oops: 0000 [#1] SMP [ 1106.400020] Modules linked in: bridge stp llc evdev serio_raw i2c_piix4 button fuse [ 1106.400020] CPU: 0 PID: 3635 Comm: setxattr Not tainted 3.16.0-kds+ #2936 [ 1106.400020] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 1106.400020] task: ffff8800291a0000 ti: ffff88002917c000 task.ti: ffff88002917c000 [ 1106.400020] RIP: 0010:[<ffffffff812af7b8>] [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.400020] RSP: 0018:ffff88002917fd50 EFLAGS: 00010246 [ 1106.400020] RAX: 0000000000000000 RBX: ffff88002917fdf8 RCX: 0000000000000000 [ 1106.400020] RDX: 0000000000000000 RSI: ffffffff818136d3 RDI: ffff88002917fdf8 [ 1106.400020] RBP: ffff88002917fd68 R08: 0000000000000000 R09: 00000000003ec1df [ 1106.400020] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800438a0a00 [ 1106.400020] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 1106.400020] FS: 00007f7dfa7d7740(0000) GS:ffff88005da00000(0000) knlGS:0000000000000000 [ 1106.400020] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1106.400020] CR2: 0000000000000000 CR3: 000000003763e000 CR4: 00000000000006f0 [ 1106.400020] Stack: [ 1106.400020] ffff8800438a0a00 ffff88002917fdf8 0000000000000000 ffff88002917fd98 [ 1106.400020] ffffffff812a1030 ffff8800438a0a00 ffff88002917fdf8 0000000000000000 [ 1106.400020] 0000000000000000 ffff88002917fde0 ffffffff8116d08a ffff88002917fdc8 [ 1106.400020] Call Trace: [ 1106.400020] [<ffffffff812a1030>] security_inode_setxattr+0x5d/0x6a [ 1106.400020] [<ffffffff8116d08a>] vfs_setxattr+0x6b/0x9f [ 1106.400020] [<ffffffff8116d1e0>] setxattr+0x122/0x16c [ 1106.400020] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 1106.400020] [<ffffffff8114d011>] ? __sb_start_write+0x10f/0x143 [ 1106.400020] [<ffffffff811687e8>] ? mnt_want_write+0x21/0x45 [ 1106.400020] [<ffffffff811687c0>] ? __mnt_want_write+0x48/0x4f [ 1106.400020] [<ffffffff8116d3e6>] SyS_setxattr+0x6e/0xb0 [ 1106.400020] [<ffffffff81529da9>] system_call_fastpath+0x16/0x1b [ 1106.400020] Code: c3 0f 1f 44 00 00 55 48 89 e5 41 55 49 89 d5 41 54 49 89 fc 53 48 89 f3 48 c7 c6 d3 36 81 81 48 89 df e8 18 22 04 00 85 c0 75 07 <41> 80 7d 00 02 74 0d 48 89 de 4c 89 e7 e8 5a fe ff ff eb 03 83 [ 1106.400020] RIP [<ffffffff812af7b8>] evm_inode_setxattr+0x2a/0x48 [ 1106.400020] RSP <ffff88002917fd50> [ 1106.400020] CR2: 0000000000000000 [ 1106.428061] ---[ end trace ae08331628ba3050 ]--- Reported-by: Jan Kara <jack@suse.cz> Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2014-10-28 14:28:49 +02:00
return -EPERM;
}
return evm_protect_xattr(mnt_userns, dentry, xattr_name, xattr_value,
xattr_value_len);
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
}
/**
* evm_inode_removexattr - protect the EVM extended attribute
* @mnt_userns: user namespace of the idmapped mount
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
*
* Removing 'security.evm' requires CAP_SYS_ADMIN privileges and that
* the current value is valid.
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
*/
int evm_inode_removexattr(struct user_namespace *mnt_userns,
struct dentry *dentry, const char *xattr_name)
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
{
/* Policy permits modification of the protected xattrs even though
* there's no HMAC key loaded
*/
if (evm_initialized & EVM_ALLOW_METADATA_WRITES)
return 0;
return evm_protect_xattr(mnt_userns, dentry, xattr_name, NULL, 0);
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
}
static void evm_reset_status(struct inode *inode)
{
struct integrity_iint_cache *iint;
iint = integrity_iint_find(inode);
if (iint)
iint->evm_status = INTEGRITY_UNKNOWN;
}
/**
* evm_revalidate_status - report whether EVM status re-validation is necessary
* @xattr_name: pointer to the affected extended attribute name
*
* Report whether callers of evm_verifyxattr() should re-validate the
* EVM status.
*
* Return true if re-validation is necessary, false otherwise.
*/
bool evm_revalidate_status(const char *xattr_name)
{
if (!evm_key_loaded())
return false;
/* evm_inode_post_setattr() passes NULL */
if (!xattr_name)
return true;
if (!evm_protected_xattr(xattr_name) && !posix_xattr_acl(xattr_name) &&
strcmp(xattr_name, XATTR_NAME_EVM))
return false;
return true;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/**
* evm_inode_post_setxattr - update 'security.evm' to reflect the changes
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
* @xattr_value: pointer to the new extended attribute value
* @xattr_value_len: pointer to the new extended attribute value length
*
* Update the HMAC stored in 'security.evm' to reflect the change.
*
* No need to take the i_mutex lock here, as this function is called from
* __vfs_setxattr_noperm(). The caller of which has taken the inode's
* i_mutex lock.
*/
void evm_inode_post_setxattr(struct dentry *dentry, const char *xattr_name,
const void *xattr_value, size_t xattr_value_len)
{
if (!evm_revalidate_status(xattr_name))
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
return;
evm_reset_status(dentry->d_inode);
if (!strcmp(xattr_name, XATTR_NAME_EVM))
return;
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
if (!(evm_initialized & EVM_INIT_HMAC))
return;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
evm_update_evmxattr(dentry, xattr_name, xattr_value, xattr_value_len);
}
/**
* evm_inode_post_removexattr - update 'security.evm' after removing the xattr
* @dentry: pointer to the affected dentry
* @xattr_name: pointer to the affected extended attribute name
*
* Update the HMAC stored in 'security.evm' to reflect removal of the xattr.
*
* No need to take the i_mutex lock here, as this function is called from
* vfs_removexattr() which takes the i_mutex.
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
*/
void evm_inode_post_removexattr(struct dentry *dentry, const char *xattr_name)
{
if (!evm_revalidate_status(xattr_name))
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
return;
evm_reset_status(dentry->d_inode);
if (!strcmp(xattr_name, XATTR_NAME_EVM))
return;
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
if (!(evm_initialized & EVM_INIT_HMAC))
return;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
evm_update_evmxattr(dentry, xattr_name, NULL, 0);
}
evm: Allow setxattr() and setattr() for unmodified metadata With the patch to allow xattr/attr operations if a portable signature verification fails, cp and tar can copy all xattrs/attrs so that at the end of the process verification succeeds. However, it might happen that the xattrs/attrs are already set to the correct value (taken at signing time) and signature verification succeeds before the copy has completed. For example, an archive might contains files owned by root and the archive is extracted by root. Then, since portable signatures are immutable, all subsequent operations fail (e.g. fchown()), even if the operation is legitimate (does not alter the current value). This patch avoids this problem by reporting successful operation to user space when that operation does not alter the current value of xattrs/attrs. With this patch, the one that introduces evm_hmac_disabled() and the one that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM portable signatures can be used without disabling metadata verification (by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata verification enabled, altering immutable metadata protected with a portable signature that was successfully verified will be denied (existing behavior). Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function] Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-14 17:27:49 +02:00
static int evm_attr_change(struct dentry *dentry, struct iattr *attr)
{
struct inode *inode = d_backing_inode(dentry);
unsigned int ia_valid = attr->ia_valid;
if ((!(ia_valid & ATTR_UID) || uid_eq(attr->ia_uid, inode->i_uid)) &&
(!(ia_valid & ATTR_GID) || gid_eq(attr->ia_gid, inode->i_gid)) &&
(!(ia_valid & ATTR_MODE) || attr->ia_mode == inode->i_mode))
return 0;
return 1;
}
/**
* evm_inode_setattr - prevent updating an invalid EVM extended attribute
* @dentry: pointer to the affected dentry
*
* Permit update of file attributes when files have a valid EVM signature,
* except in the case of them having an immutable portable signature.
*/
int evm_inode_setattr(struct dentry *dentry, struct iattr *attr)
{
unsigned int ia_valid = attr->ia_valid;
enum integrity_status evm_status;
/* Policy permits modification of the protected attrs even though
* there's no HMAC key loaded
*/
if (evm_initialized & EVM_ALLOW_METADATA_WRITES)
return 0;
if (!(ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID)))
return 0;
evm_status = evm_verify_current_integrity(dentry);
/*
* Writing attrs is safe for portable signatures, as portable signatures
* are immutable and can never be updated.
*/
if ((evm_status == INTEGRITY_PASS) ||
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
(evm_status == INTEGRITY_NOXATTRS) ||
(evm_status == INTEGRITY_FAIL_IMMUTABLE) ||
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
(evm_hmac_disabled() && (evm_status == INTEGRITY_NOLABEL ||
evm_status == INTEGRITY_UNKNOWN)))
return 0;
evm: Allow setxattr() and setattr() for unmodified metadata With the patch to allow xattr/attr operations if a portable signature verification fails, cp and tar can copy all xattrs/attrs so that at the end of the process verification succeeds. However, it might happen that the xattrs/attrs are already set to the correct value (taken at signing time) and signature verification succeeds before the copy has completed. For example, an archive might contains files owned by root and the archive is extracted by root. Then, since portable signatures are immutable, all subsequent operations fail (e.g. fchown()), even if the operation is legitimate (does not alter the current value). This patch avoids this problem by reporting successful operation to user space when that operation does not alter the current value of xattrs/attrs. With this patch, the one that introduces evm_hmac_disabled() and the one that allows a metadata operation on the INTEGRITY_FAIL_IMMUTABLE error, EVM portable signatures can be used without disabling metadata verification (by setting EVM_ALLOW_METADATA_WRITES). Due to keeping metadata verification enabled, altering immutable metadata protected with a portable signature that was successfully verified will be denied (existing behavior). Reported-by: kernel test robot <lkp@intel.com> [implicit declaration of function] Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-14 17:27:49 +02:00
if (evm_status == INTEGRITY_PASS_IMMUTABLE &&
!evm_attr_change(dentry, attr))
return 0;
integrity_audit_msg(AUDIT_INTEGRITY_METADATA, d_backing_inode(dentry),
dentry->d_name.name, "appraise_metadata",
integrity_status_msg[evm_status], -EPERM, 0);
return -EPERM;
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
/**
* evm_inode_post_setattr - update 'security.evm' after modifying metadata
* @dentry: pointer to the affected dentry
* @ia_valid: for the UID and GID status
*
* For now, update the HMAC stored in 'security.evm' to reflect UID/GID
* changes.
*
* This function is called from notify_change(), which expects the caller
* to lock the inode's i_mutex.
*/
void evm_inode_post_setattr(struct dentry *dentry, int ia_valid)
{
if (!evm_revalidate_status(NULL))
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
return;
evm_reset_status(dentry->d_inode);
evm: Introduce evm_hmac_disabled() to safely ignore verification errors When a file is being created, LSMs can set the initial label with the inode_init_security hook. If no HMAC key is loaded, the new file will have LSM xattrs but not the HMAC. It is also possible that the file remains without protected xattrs after creation if no active LSM provided it, or because the filesystem does not support them. Unfortunately, EVM will deny any further metadata operation on new files, as evm_protect_xattr() will return the INTEGRITY_NOLABEL error if protected xattrs exist without security.evm, INTEGRITY_NOXATTRS if no protected xattrs exist or INTEGRITY_UNKNOWN if xattrs are not supported. This would limit the usability of EVM when only a public key is loaded, as commands such as cp or tar with the option to preserve xattrs won't work. This patch introduces the evm_hmac_disabled() function to determine whether or not it is safe to ignore verification errors, based on the ability of EVM to calculate HMACs. If the HMAC key is not loaded, and it cannot be loaded in the future due to the EVM_SETUP_COMPLETE initialization flag, allowing an operation despite the attrs/xattrs being found invalid will not make them valid. Since the post hooks can be executed even when the HMAC key is not loaded, this patch also ensures that the EVM_INIT_HMAC initialization flag is set before the post hooks call evm_update_evmxattr(). Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> (for ensuring EVM_INIT_HMAC is set) Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-05-20 10:48:31 +02:00
if (!(evm_initialized & EVM_INIT_HMAC))
return;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID))
evm_update_evmxattr(dentry, NULL, NULL, 0);
}
/*
* evm_inode_init_security - initializes security.evm HMAC value
*/
int evm_inode_init_security(struct inode *inode,
const struct xattr *lsm_xattr,
struct xattr *evm_xattr)
{
struct evm_xattr *xattr_data;
int rc;
if (!(evm_initialized & EVM_INIT_HMAC) ||
!evm_protected_xattr(lsm_xattr->name))
return 0;
xattr_data = kzalloc(sizeof(*xattr_data), GFP_NOFS);
if (!xattr_data)
return -ENOMEM;
xattr_data->data.type = EVM_XATTR_HMAC;
rc = evm_init_hmac(inode, lsm_xattr, xattr_data->digest);
if (rc < 0)
goto out;
evm_xattr->value = xattr_data;
evm_xattr->value_len = sizeof(*xattr_data);
evm_xattr->name = XATTR_EVM_SUFFIX;
return 0;
out:
kfree(xattr_data);
return rc;
}
EXPORT_SYMBOL_GPL(evm_inode_init_security);
#ifdef CONFIG_EVM_LOAD_X509
void __init evm_load_x509(void)
{
int rc;
rc = integrity_load_x509(INTEGRITY_KEYRING_EVM, CONFIG_EVM_X509_PATH);
if (!rc)
evm_initialized |= EVM_INIT_X509;
}
#endif
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
static int __init init_evm(void)
{
int error;
struct list_head *pos, *q;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
evm_init_config();
error = integrity_init_keyring(INTEGRITY_KEYRING_EVM);
if (error)
goto error;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
error = evm_init_secfs();
if (error < 0) {
pr_info("Error registering secfs\n");
goto error;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
}
error:
if (error != 0) {
if (!list_empty(&evm_config_xattrnames)) {
list_for_each_safe(pos, q, &evm_config_xattrnames)
list_del(pos);
}
}
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
return error;
evm: re-release EVM protects a file's security extended attributes(xattrs) against integrity attacks. This patchset provides the framework and an initial method. The initial method maintains an HMAC-sha1 value across the security extended attributes, storing the HMAC value as the extended attribute 'security.evm'. Other methods of validating the integrity of a file's metadata will be posted separately (eg. EVM-digital-signatures). While this patchset does authenticate the security xattrs, and cryptographically binds them to the inode, coming extensions will bind other directory and inode metadata for more complete protection. To help simplify the review and upstreaming process, each extension will be posted separately (eg. IMA-appraisal, IMA-appraisal-directory). For a general overview of the proposed Linux integrity subsystem, refer to Dave Safford's whitepaper: http://downloads.sf.net/project/linux-ima/linux-ima/Integrity_overview.pdf. EVM depends on the Kernel Key Retention System to provide it with a trusted/encrypted key for the HMAC-sha1 operation. The key is loaded onto the root's keyring using keyctl. Until EVM receives notification that the key has been successfully loaded onto the keyring (echo 1 > <securityfs>/evm), EVM can not create or validate the 'security.evm' xattr, but returns INTEGRITY_UNKNOWN. Loading the key and signaling EVM should be done as early as possible. Normally this is done in the initramfs, which has already been measured as part of the trusted boot. For more information on creating and loading existing trusted/encrypted keys, refer to Documentation/keys-trusted-encrypted.txt. A sample dracut patch, which loads the trusted/encrypted key and enables EVM, is available from http://linux-ima.sourceforge.net/#EVM. Based on the LSMs enabled, the set of EVM protected security xattrs is defined at compile. EVM adds the following three calls to the existing security hooks: evm_inode_setxattr(), evm_inode_post_setxattr(), and evm_inode_removexattr. To initialize and update the 'security.evm' extended attribute, EVM defines three calls: evm_inode_post_init(), evm_inode_post_setattr() and evm_inode_post_removexattr() hooks. To verify the integrity of a security xattr, EVM exports evm_verifyxattr(). Changelog v7: - Fixed URL in EVM ABI documentation Changelog v6: (based on Serge Hallyn's review) - fix URL in patch description - remove evm_hmac_size definition - use SHA1_DIGEST_SIZE (removed both MAX_DIGEST_SIZE and evm_hmac_size) - moved linux include before other includes - test for crypto_hash_setkey failure - fail earlier for invalid key - clear entire encrypted key, even on failure - check xattr name length before comparing xattr names Changelog: - locking based on i_mutex, remove evm_mutex - using trusted/encrypted keys for storing the EVM key used in the HMAC-sha1 operation. - replaced crypto hash with shash (Dmitry Kasatkin) - support for additional methods of verifying the security xattrs (Dmitry Kasatkin) - iint not allocated for all regular files, but only for those appraised - Use cap_sys_admin in lieu of cap_mac_admin - Use __vfs_setxattr_noperm(), without permission checks, from EVM Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
2011-03-15 16:12:09 -04:00
}
late_initcall(init_evm);