linux/arch/riscv/kernel/setup.c

332 lines
8.2 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2009 Sunplus Core Technology Co., Ltd.
* Chen Liqin <liqin.chen@sunplusct.com>
* Lennox Wu <lennox.wu@sunplusct.com>
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2020 FORTH-ICS/CARV
* Nick Kossifidis <mick@ics.forth.gr>
*/
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/memblock.h>
#include <linux/sched.h>
#include <linux/console.h>
#include <linux/screen_info.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/sched/task.h>
RISC-V: Support cpu hotplug This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-17 18:11:44 -07:00
#include <linux/smp.h>
#include <linux/efi.h>
#include <linux/crash_dump.h>
#include <asm/alternative.h>
#include <asm/cacheflush.h>
RISC-V: Support cpu hotplug This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-17 18:11:44 -07:00
#include <asm/cpu_ops.h>
#include <asm/early_ioremap.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/set_memory.h>
#include <asm/sections.h>
#include <asm/sbi.h>
#include <asm/tlbflush.h>
#include <asm/thread_info.h>
#include <asm/kasan.h>
#include <asm/efi.h>
#include "head.h"
#if defined(CONFIG_DUMMY_CONSOLE) || defined(CONFIG_EFI)
struct screen_info screen_info __section(".data") = {
.orig_video_lines = 30,
.orig_video_cols = 80,
.orig_video_mode = 0,
.orig_video_ega_bx = 0,
.orig_video_isVGA = 1,
.orig_video_points = 8
};
#endif
/*
* The lucky hart to first increment this variable will boot the other cores.
* This is used before the kernel initializes the BSS so it can't be in the
* BSS.
*/
atomic_t hart_lottery __section(".sdata")
#ifdef CONFIG_XIP_KERNEL
= ATOMIC_INIT(0xC001BEEF)
#endif
;
unsigned long boot_cpu_hartid;
RISC-V: Support cpu hotplug This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-17 18:11:44 -07:00
static DEFINE_PER_CPU(struct cpu, cpu_devices);
/*
* Place kernel memory regions on the resource tree so that
* kexec-tools can retrieve them from /proc/iomem. While there
* also add "System RAM" regions for compatibility with other
* archs, and the rest of the known regions for completeness.
*/
static struct resource kimage_res = { .name = "Kernel image", };
static struct resource code_res = { .name = "Kernel code", };
static struct resource data_res = { .name = "Kernel data", };
static struct resource rodata_res = { .name = "Kernel rodata", };
static struct resource bss_res = { .name = "Kernel bss", };
#ifdef CONFIG_CRASH_DUMP
static struct resource elfcorehdr_res = { .name = "ELF Core hdr", };
#endif
static int __init add_resource(struct resource *parent,
struct resource *res)
{
int ret = 0;
ret = insert_resource(parent, res);
if (ret < 0) {
pr_err("Failed to add a %s resource at %llx\n",
res->name, (unsigned long long) res->start);
return ret;
}
return 1;
}
static int __init add_kernel_resources(void)
{
int ret = 0;
/*
* The memory region of the kernel image is continuous and
* was reserved on setup_bootmem, register it here as a
* resource, with the various segments of the image as
* child nodes.
*/
code_res.start = __pa_symbol(_text);
code_res.end = __pa_symbol(_etext) - 1;
code_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
rodata_res.start = __pa_symbol(__start_rodata);
rodata_res.end = __pa_symbol(__end_rodata) - 1;
rodata_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
data_res.start = __pa_symbol(_data);
data_res.end = __pa_symbol(_edata) - 1;
data_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
bss_res.start = __pa_symbol(__bss_start);
bss_res.end = __pa_symbol(__bss_stop) - 1;
bss_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
kimage_res.start = code_res.start;
kimage_res.end = bss_res.end;
kimage_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
ret = add_resource(&iomem_resource, &kimage_res);
if (ret < 0)
return ret;
ret = add_resource(&kimage_res, &code_res);
if (ret < 0)
return ret;
ret = add_resource(&kimage_res, &rodata_res);
if (ret < 0)
return ret;
ret = add_resource(&kimage_res, &data_res);
if (ret < 0)
return ret;
ret = add_resource(&kimage_res, &bss_res);
return ret;
}
static void __init init_resources(void)
{
struct memblock_region *region = NULL;
struct resource *res = NULL;
RISC-V: Do not allocate memblock while iterating reserved memblocks Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-11 15:45:01 -08:00
struct resource *mem_res = NULL;
size_t mem_res_sz = 0;
int num_resources = 0, res_idx = 0;
int ret = 0;
/* + 1 as memblock_alloc() might increase memblock.reserved.cnt */
num_resources = memblock.memory.cnt + memblock.reserved.cnt + 1;
res_idx = num_resources - 1;
mem_res_sz = num_resources * sizeof(*mem_res);
RISC-V: Do not allocate memblock while iterating reserved memblocks Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-11 15:45:01 -08:00
mem_res = memblock_alloc(mem_res_sz, SMP_CACHE_BYTES);
if (!mem_res)
panic("%s: Failed to allocate %zu bytes\n", __func__, mem_res_sz);
/*
* Start by adding the reserved regions, if they overlap
* with /memory regions, insert_resource later on will take
* care of it.
*/
ret = add_kernel_resources();
if (ret < 0)
goto error;
#ifdef CONFIG_KEXEC_CORE
if (crashk_res.start != crashk_res.end) {
ret = add_resource(&iomem_resource, &crashk_res);
if (ret < 0)
goto error;
}
#endif
#ifdef CONFIG_CRASH_DUMP
if (elfcorehdr_size > 0) {
elfcorehdr_res.start = elfcorehdr_addr;
elfcorehdr_res.end = elfcorehdr_addr + elfcorehdr_size - 1;
elfcorehdr_res.flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
add_resource(&iomem_resource, &elfcorehdr_res);
}
#endif
for_each_reserved_mem_region(region) {
res = &mem_res[res_idx--];
res->name = "Reserved";
res->flags = IORESOURCE_MEM | IORESOURCE_EXCLUSIVE;
res->start = __pfn_to_phys(memblock_region_reserved_base_pfn(region));
res->end = __pfn_to_phys(memblock_region_reserved_end_pfn(region)) - 1;
/*
* Ignore any other reserved regions within
* system memory.
*/
RISC-V: Do not allocate memblock while iterating reserved memblocks Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-11 15:45:01 -08:00
if (memblock_is_memory(res->start)) {
/* Re-use this pre-allocated resource */
res_idx++;
continue;
RISC-V: Do not allocate memblock while iterating reserved memblocks Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a3b82 ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-01-11 15:45:01 -08:00
}
ret = add_resource(&iomem_resource, res);
if (ret < 0)
goto error;
}
/* Add /memory regions to the resource tree */
for_each_mem_region(region) {
res = &mem_res[res_idx--];
if (unlikely(memblock_is_nomap(region))) {
res->name = "Reserved";
res->flags = IORESOURCE_MEM | IORESOURCE_EXCLUSIVE;
} else {
res->name = "System RAM";
res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
}
res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;
ret = add_resource(&iomem_resource, res);
if (ret < 0)
goto error;
}
/* Clean-up any unused pre-allocated resources */
if (res_idx >= 0)
memblock_free(mem_res, (res_idx + 1) * sizeof(*mem_res));
return;
error:
/* Better an empty resource tree than an inconsistent one */
release_child_resources(&iomem_resource);
memblock_free(mem_res, mem_res_sz);
}
static void __init parse_dtb(void)
{
/* Early scan of device tree from init memory */
if (early_init_dt_scan(dtb_early_va)) {
const char *name = of_flat_dt_get_machine_name();
if (name) {
pr_info("Machine model: %s\n", name);
dump_stack_set_arch_desc("%s (DT)", name);
}
} else {
pr_err("No DTB passed to the kernel\n");
}
#ifdef CONFIG_CMDLINE_FORCE
strscpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
pr_info("Forcing kernel command line to: %s\n", boot_command_line);
#endif
}
void __init setup_arch(char **cmdline_p)
{
parse_dtb();
setup_initial_init_mm(_stext, _etext, _edata, _end);
*cmdline_p = boot_command_line;
early_ioremap_setup();
jump_label_init();
parse_early_param();
efi_init();
paging_init();
#if IS_ENABLED(CONFIG_BUILTIN_DTB)
unflatten_and_copy_device_tree();
#else
if (early_init_dt_verify(__va(XIP_FIXUP(dtb_early_pa))))
unflatten_device_tree();
else
pr_err("No DTB found in kernel mappings\n");
#endif
riscv: fix reserved memory setup Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name: Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes(). This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate. Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params. Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com> Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/ Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-07 15:15:25 +00:00
early_init_fdt_scan_reserved_mem();
misc_mem_init();
init_resources();
sbi_init();
#ifdef CONFIG_KASAN
kasan_init();
#endif
#ifdef CONFIG_SMP
setup_smp();
#endif
riscv_init_cbom_blocksize();
riscv_fill_hwcap();
apply_boot_alternatives();
}
RISC-V: Support cpu hotplug This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-17 18:11:44 -07:00
static int __init topology_init(void)
{
int i, ret;
RISC-V: Support cpu hotplug This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-17 18:11:44 -07:00
for_each_possible_cpu(i) {
struct cpu *cpu = &per_cpu(cpu_devices, i);
cpu->hotpluggable = cpu_has_hotplug(i);
ret = register_cpu(cpu, i);
if (unlikely(ret))
pr_warn("Warning: %s: register_cpu %d failed (%d)\n",
__func__, i, ret);
RISC-V: Support cpu hotplug This patch enable support for cpu hotplug in RISC-V. It uses SBI HSM extension to online/offline any hart. As a result, the harts are returned to firmware once they are offline. If the harts are brought online afterwards, they re-enter Linux kernel as if a secondary hart booted for the first time. All booting requirements are honored during this process. Tested both on QEMU and HighFive Unleashed board with. Test result follows. --------------------------------------------------- Offline cpu 2 --------------------------------------------------- $ echo 0 > /sys/devices/system/cpu/cpu2/online [ 32.828684] CPU2: off $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 --------------------------------------------------- online cpu 2 --------------------------------------------------- $ echo 1 > /sys/devices/system/cpu/cpu2/online $ cat /proc/cpuinfo processor : 0 hart : 0 isa : rv64imafdcsu mmu : sv48 processor : 1 hart : 1 isa : rv64imafdcsu mmu : sv48 processor : 2 hart : 2 isa : rv64imafdcsu mmu : sv48 processor : 3 hart : 3 isa : rv64imafdcsu mmu : sv48 processor : 4 hart : 4 isa : rv64imafdcsu mmu : sv48 processor : 5 hart : 5 isa : rv64imafdcsu mmu : sv48 processor : 6 hart : 6 isa : rv64imafdcsu mmu : sv48 processor : 7 hart : 7 isa : rv64imafdcsu mmu : sv48 Signed-off-by: Atish Patra <atish.patra@wdc.com> Reviewed-by: Anup Patel <anup@brainfault.org>
2020-03-17 18:11:44 -07:00
}
return 0;
}
subsys_initcall(topology_init);
void free_initmem(void)
{
if (IS_ENABLED(CONFIG_STRICT_KERNEL_RWX))
set_kernel_memory(lm_alias(__init_begin), lm_alias(__init_end),
IS_ENABLED(CONFIG_64BIT) ?
set_memory_rw : set_memory_rw_nx);
free_initmem_default(POISON_FREE_INITMEM);
}