linux/fs/xfs/libxfs/xfs_attr.h

628 lines
23 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (c) 2000,2002-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#ifndef __XFS_ATTR_H__
#define __XFS_ATTR_H__
struct xfs_inode;
struct xfs_da_args;
struct xfs_attr_list_context;
/*
* Large attribute lists are structured around Btrees where all the data
* elements are in the leaf nodes. Attribute names are hashed into an int,
* then that int is used as the index into the Btree. Since the hashval
* of an attribute name may not be unique, we may have duplicate keys.
* The internal links in the Btree are logical block offsets into the file.
*
* Small attribute lists use a different format and are packed as tightly
* as possible so as to fit into the literal area of the inode.
*/
/*
* The maximum size (into the kernel or returned from the kernel) of an
* attribute value or the buffer used for an attr_list() call. Larger
* sizes will result in an ERANGE return code.
*/
#define ATTR_MAX_VALUELEN (64*1024) /* max length of a value */
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
static inline bool xfs_has_larp(struct xfs_mount *mp)
{
#ifdef DEBUG
return xfs_globals.larp;
#else
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
return false;
#endif
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
}
/*
* Kernel-internal version of the attrlist cursor.
*/
struct xfs_attrlist_cursor_kern {
__u32 hashval; /* hash value of next entry to add */
__u32 blkno; /* block containing entry (suggestion) */
__u32 offset; /* offset in list of equal-hashvals */
__u16 pad1; /* padding to match user-level */
__u8 pad2; /* padding to match user-level */
__u8 initted; /* T/F: cursor has been initialized */
};
/*========================================================================
* Structure used to pass context around among the routines.
*========================================================================*/
/* void; state communicated via *context */
typedef void (*put_listent_func_t)(struct xfs_attr_list_context *, int,
unsigned char *, int, int);
struct xfs_attr_list_context {
struct xfs_trans *tp;
struct xfs_inode *dp; /* inode */
struct xfs_attrlist_cursor_kern cursor; /* position in list */
void *buffer; /* output buffer */
/*
* Abort attribute list iteration if non-zero. Can be used to pass
* error values to the xfs_attr_list caller.
*/
int seen_enough;
bool allow_incomplete;
ssize_t count; /* num used entries */
int dupcnt; /* count dup hashvals seen */
int bufsize; /* total buffer size */
int firstu; /* first used byte in buffer */
unsigned int attr_filter; /* XFS_ATTR_{ROOT,SECURE} */
int resynch; /* T/F: resynch with cursor */
put_listent_func_t put_listent; /* list output fmt function */
int index; /* index into output buffer */
};
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
/*
* ========================================================================
* Structure used to pass context around among the delayed routines.
* ========================================================================
*/
/*
* Below is a state machine diagram for attr remove operations. The XFS_DAS_*
* states indicate places where the function would return -EAGAIN, and then
* immediately resume from after being called by the calling function. States
* marked as a "subroutine state" indicate that they belong to a subroutine, and
* so the calling function needs to pass them back to that subroutine to allow
* it to finish where it left off. But they otherwise do not have a role in the
* calling function other than just passing through.
*
* xfs_attr_remove_iter()
*
* v
* have attr to remove? n> done
*
* y
*
* v
* are we short form? y> xfs_attr_shortform_remove > done
*
* n
*
* V
* are we leaf form? y> xfs_attr_leaf_removename > done
*
* n
*
* V
* need to setup state?
*
* n y
*
* v
* find attr and get state
* attr has remote blks? n
* v
* find and invalidate
* y the remote blocks.
* mark attr incomplete
*
*
*
* v
* Have remote blks to remove? y
* ^ remove the blks
*
* v
* XFS_DAS_RMTBLK <n done?
* re-enter with
* one less blk to y
* remove
* V
* refill the state
* n
* v
* XFS_DAS_RM_NAME
*
*
*
* v
* remove leaf and
* update hash with
* xfs_attr_node_remove_cleanup
*
* v
* need to
* shrink tree? n
*
* y
*
* v
* join leaf
*
* v
* XFS_DAS_RM_SHRINK
*
* v
* do the shrink
*
* v
* free state <
*
* v
* done
*
*
* Below is a state machine diagram for attr set operations.
*
* It seems the challenge with understanding this system comes from trying to
* absorb the state machine all at once, when really one should only be looking
* at it with in the context of a single function. Once a state sensitive
* function is called, the idea is that it "takes ownership" of the
* state machine. It isn't concerned with the states that may have belonged to
* it's calling parent. Only the states relevant to itself or any other
* subroutines there in. Once a calling function hands off the state machine to
* a subroutine, it needs to respect the simple rule that it doesn't "own" the
* state machine anymore, and it's the responsibility of that calling function
* to propagate the -EAGAIN back up the call stack. Upon reentry, it is
* committed to re-calling that subroutine until it returns something other than
* -EAGAIN. Once that subroutine signals completion (by returning anything other
* than -EAGAIN), the calling function can resume using the state machine.
*
* xfs_attr_set_iter()
*
* v
* y has an attr fork?
* |
* n
* |
* V
* add a fork
*
*
*
* V
* is shortform?
*
* y
*
* V
* xfs_attr_set_fmt
* |
* V
* xfs_attr_try_sf_addname
*
* V
* had enough y> done
* space?
* n
* n
*
* V
* transform to leaf
*
* V
* hold the leaf buffer
*
* V
* return -EAGAIN
* Re-enter in
* leaf form
*
* > release leaf buffer
* if needed
*
* V
* n fork has
* only 1 blk?
*
* y
*
* v
* xfs_attr_leaf_try_add()
*
* v
* had enough y
* space?
*
* n
*
* v
* return -EAGAIN
* re-enter in
* node form
*
*
*
* V
* xfs_attr_node_addname_find_attr
* determines if this
* is create or rename
* find space to store attr
*
* v
* xfs_attr_node_addname
*
* v
* fits in a node leaf? n
* ^ v
* single leaf node?
*
* y y n
*
* v v v
* update grow the leaf split if
* hashvals return -EAGAIN needed
* retry leaf add
* on reentry
*
*
* v
* need to alloc
* y or flip flag?
*
* n
*
* v
* done
*
*
* XFS_DAS_FOUND_LBLK <
*
* V
* xfs_attr_leaf_addname()
*
* v
* first time through?
*
* y
*
* n v
* if we have rmt blks
* find space for them
*
*
*
* v
* still have
* n blks to alloc? <
*
* y
*
* v
* alloc one blk
* return -EAGAIN
* re-enter with one
* less blk to alloc
*
*
* > set the rmt
* value
*
* v
* was this
* a rename? n
*
* y
*
* v
* flip incomplete
* flag
*
* v
* XFS_DAS_FLIP_LFLAG
*
* v
* need to remove
* old bks? n
*
* y
*
* V
* remove
* > old blks
*
* XFS_DAS_RM_LBLK
* ^
* v
* y more to
* remove?
*
* n
*
* v
* XFS_DAS_RD_LEAF
*
* v
* remove leaf
*
* v
* shrink to sf
* if needed
*
* v
* done <
*
* > XFS_DAS_FOUND_NBLK
*
* v
* n need to
* alloc blks?
*
* y
*
* v
* find space
*
* v
* >XFS_DAS_ALLOC_NODE
*
* v
* alloc blk
*
* v
* y need to alloc
* more blocks?
*
* n
*
* v
* set the rmt value
*
* v
* was this
* > a rename? n
*
* y
*
* v
* flip incomplete
* flag
*
* v
* XFS_DAS_FLIP_NFLAG
*
* v
* need to
* remove blks? n
*
* y
*
* v
* remove
* > old blks
*
* XFS_DAS_RM_NBLK
* ^
* v
* y more to
* remove
*
* n
*
* v
* XFS_DAS_CLR_FLAG
*
* v
* clear flags
*
*
*
* v
* done
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
*/
/*
* Enum values for xfs_attr_item.xattri_da_state
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
*
* These values are used by delayed attribute operations to keep track of where
* they were before they returned -EAGAIN. A return code of -EAGAIN signals the
* calling function to roll the transaction, and then call the subroutine to
* finish the operation. The enum is then used by the subroutine to jump back
* to where it was and resume executing where it left off.
*/
enum xfs_delattr_state {
XFS_DAS_UNINIT = 0, /* No state has been set yet */
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
/*
* Initial sequence states. The replace setup code relies on the
* ADD and REMOVE states for a specific format to be sequential so
* that we can transform the initial operation to be performed
* according to the xfs_has_larp() state easily.
*/
XFS_DAS_SF_ADD, /* Initial sf add state */
XFS_DAS_SF_REMOVE, /* Initial sf replace/remove state */
XFS_DAS_LEAF_ADD, /* Initial leaf add state */
XFS_DAS_LEAF_REMOVE, /* Initial leaf replace/remove state */
XFS_DAS_NODE_ADD, /* Initial node add state */
XFS_DAS_NODE_REMOVE, /* Initial node replace/remove state */
/* Leaf state set/replace/remove sequence */
XFS_DAS_LEAF_SET_RMT, /* set a remote xattr from a leaf */
XFS_DAS_LEAF_ALLOC_RMT, /* We are allocating remote blocks */
XFS_DAS_LEAF_REPLACE, /* Perform replace ops on a leaf */
XFS_DAS_LEAF_REMOVE_OLD, /* Start removing old attr from leaf */
XFS_DAS_LEAF_REMOVE_RMT, /* A rename is removing remote blocks */
XFS_DAS_LEAF_REMOVE_ATTR, /* Remove the old attr from a leaf */
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
/* Node state sequence, must match leaf state above */
XFS_DAS_NODE_SET_RMT, /* set a remote xattr from a node */
XFS_DAS_NODE_ALLOC_RMT, /* We are allocating remote blocks */
XFS_DAS_NODE_REPLACE, /* Perform replace ops on a node */
XFS_DAS_NODE_REMOVE_OLD, /* Start removing old attr from node */
XFS_DAS_NODE_REMOVE_RMT, /* A rename is removing remote blocks */
XFS_DAS_NODE_REMOVE_ATTR, /* Remove the old attr from a node */
XFS_DAS_DONE, /* finished operation */
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
};
#define XFS_DAS_STRINGS \
{ XFS_DAS_UNINIT, "XFS_DAS_UNINIT" }, \
{ XFS_DAS_SF_ADD, "XFS_DAS_SF_ADD" }, \
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
{ XFS_DAS_SF_REMOVE, "XFS_DAS_SF_REMOVE" }, \
{ XFS_DAS_LEAF_ADD, "XFS_DAS_LEAF_ADD" }, \
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
{ XFS_DAS_LEAF_REMOVE, "XFS_DAS_LEAF_REMOVE" }, \
{ XFS_DAS_NODE_ADD, "XFS_DAS_NODE_ADD" }, \
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
{ XFS_DAS_NODE_REMOVE, "XFS_DAS_NODE_REMOVE" }, \
{ XFS_DAS_LEAF_SET_RMT, "XFS_DAS_LEAF_SET_RMT" }, \
{ XFS_DAS_LEAF_ALLOC_RMT, "XFS_DAS_LEAF_ALLOC_RMT" }, \
{ XFS_DAS_LEAF_REPLACE, "XFS_DAS_LEAF_REPLACE" }, \
{ XFS_DAS_LEAF_REMOVE_OLD, "XFS_DAS_LEAF_REMOVE_OLD" }, \
{ XFS_DAS_LEAF_REMOVE_RMT, "XFS_DAS_LEAF_REMOVE_RMT" }, \
{ XFS_DAS_LEAF_REMOVE_ATTR, "XFS_DAS_LEAF_REMOVE_ATTR" }, \
{ XFS_DAS_NODE_SET_RMT, "XFS_DAS_NODE_SET_RMT" }, \
{ XFS_DAS_NODE_ALLOC_RMT, "XFS_DAS_NODE_ALLOC_RMT" }, \
{ XFS_DAS_NODE_REPLACE, "XFS_DAS_NODE_REPLACE" }, \
{ XFS_DAS_NODE_REMOVE_OLD, "XFS_DAS_NODE_REMOVE_OLD" }, \
{ XFS_DAS_NODE_REMOVE_RMT, "XFS_DAS_NODE_REMOVE_RMT" }, \
{ XFS_DAS_NODE_REMOVE_ATTR, "XFS_DAS_NODE_REMOVE_ATTR" }, \
{ XFS_DAS_DONE, "XFS_DAS_DONE" }
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
/*
* Context used for keeping track of delayed attribute operations
*/
struct xfs_attr_item {
/*
* used to log this item to an intent containing a list of attrs to
* commit later
*/
struct list_head xattri_list;
/* Used in xfs_attr_node_removename to roll through removing blocks */
struct xfs_da_state *xattri_da_state;
struct xfs_da_args *xattri_da_args;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
/*
* Used by xfs_attr_set to hold a leaf buffer across a transaction roll
*/
struct xfs_buf *xattri_leaf_bp;
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-26 15:00:33 -07:00
/* Used to keep track of current state of delayed operation */
enum xfs_delattr_state xattri_dela_state;
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
/*
* Attr operation being performed - XFS_ATTRI_OP_FLAGS_*
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
*/
unsigned int xattri_op_flags;
/* Used in xfs_attr_rmtval_set_blk to roll through allocating blocks */
xfs_dablk_t xattri_lblkno;
int xattri_blkcnt;
struct xfs_bmbt_irec xattri_map;
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
};
/*========================================================================
* Function prototypes for the kernel.
*========================================================================*/
/*
* Overall external interface routines.
*/
int xfs_attr_inactive(struct xfs_inode *dp);
int xfs_attr_list_ilocked(struct xfs_attr_list_context *);
int xfs_attr_list(struct xfs_attr_list_context *);
int xfs_inode_hasattr(struct xfs_inode *ip);
bool xfs_attr_is_leaf(struct xfs_inode *ip);
int xfs_attr_get_ilocked(struct xfs_da_args *args);
int xfs_attr_get(struct xfs_da_args *args);
int xfs_attr_set(struct xfs_da_args *args);
int xfs_attr_set_iter(struct xfs_attr_item *attr);
int xfs_attr_remove_iter(struct xfs_attr_item *attr);
bool xfs_attr_namecheck(const void *name, size_t length);
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
int xfs_attr_calc_size(struct xfs_da_args *args, int *local);
void xfs_init_attr_trans(struct xfs_da_args *args, struct xfs_trans_res *tres,
unsigned int *total);
xfs: Set up infrastructure for log attribute replay Currently attributes are modified directly across one or more transactions. But they are not logged or replayed in the event of an error. The goal of log attr replay is to enable logging and replaying of attribute operations using the existing delayed operations infrastructure. This will later enable the attributes to become part of larger multi part operations that also must first be recorded to the log. This is mostly of interest in the scheme of parent pointers which would need to maintain an attribute containing parent inode information any time an inode is moved, created, or removed. Parent pointers would then be of interest to any feature that would need to quickly derive an inode path from the mount point. Online scrub, nfs lookups and fs grow or shrink operations are all features that could take advantage of this. This patch adds two new log item types for setting or removing attributes as deferred operations. The xfs_attri_log_item will log an intent to set or remove an attribute. The corresponding xfs_attrd_log_item holds a reference to the xfs_attri_log_item and is freed once the transaction is done. Both log items use a generic xfs_attr_log_format structure that contains the attribute name, value, flags, inode, and an op_flag that indicates if the operations is a set or remove. [dchinner: added extra little bits needed for intent whiteouts] Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-04 12:41:02 +10:00
/*
* Check to see if the attr should be upgraded from non-existent or shortform to
* single-leaf-block attribute list.
*/
static inline bool
xfs_attr_is_shortform(
struct xfs_inode *ip)
{
return ip->i_afp->if_format == XFS_DINODE_FMT_LOCAL ||
(ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS &&
ip->i_afp->if_nextents == 0);
}
static inline enum xfs_delattr_state
xfs_attr_init_add_state(struct xfs_da_args *args)
{
/*
* When called from the completion of a attr remove to determine the
* next state, the attribute fork may be null. This can occur only occur
* on a pure remove, but we grab the next state before we check if a
* replace operation is being performed. If we are called from any other
* context, i_afp is guaranteed to exist. Hence if the attr fork is
* null, we were called from a pure remove operation and so we are done.
*/
if (!args->dp->i_afp)
return XFS_DAS_DONE;
xfs: use XFS_DA_OP flags in deferred attr ops We currently store the high level attr operation in args->attr_flags. This field contains what the VFS is telling us to do, but don't necessarily match what we are doing in the low level modification state machine. e.g. XATTR_REPLACE implies both XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME because it is doing both a remove and adding a new attr. However, deep in the individual state machine operations, we check errors against this high level VFS op flags, not the low level XFS_DA_OP flags. Indeed, we don't even have a low level flag for a REMOVE operation, so the only way we know we are doing a remove is the complete absence of XATTR_REPLACE, XATTR_CREATE, XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME. And because there are other flags in these fields, this is a pain to check if we need to. As the XFS_DA_OP flags are only needed once the deferred operations are set up, set these flags appropriately when we set the initial operation state. We also introduce a XFS_DA_OP_REMOVE flag to make it easy to know that we are doing a remove operation. With these, we can remove the use of XATTR_REPLACE and XATTR_CREATE in low level lookup operations, and manipulate the low level flags according to the low level context that is operating. e.g. log recovery does not have a VFS xattr operation state to copy into args->attr_flags, and the low level state machine ops we do for recovery do not match the high level VFS operations that were in progress when the system failed... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
args->op_flags |= XFS_DA_OP_ADDNAME;
if (xfs_attr_is_shortform(args->dp))
return XFS_DAS_SF_ADD;
if (xfs_attr_is_leaf(args->dp))
return XFS_DAS_LEAF_ADD;
return XFS_DAS_NODE_ADD;
}
static inline enum xfs_delattr_state
xfs_attr_init_remove_state(struct xfs_da_args *args)
{
xfs: use XFS_DA_OP flags in deferred attr ops We currently store the high level attr operation in args->attr_flags. This field contains what the VFS is telling us to do, but don't necessarily match what we are doing in the low level modification state machine. e.g. XATTR_REPLACE implies both XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME because it is doing both a remove and adding a new attr. However, deep in the individual state machine operations, we check errors against this high level VFS op flags, not the low level XFS_DA_OP flags. Indeed, we don't even have a low level flag for a REMOVE operation, so the only way we know we are doing a remove is the complete absence of XATTR_REPLACE, XATTR_CREATE, XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME. And because there are other flags in these fields, this is a pain to check if we need to. As the XFS_DA_OP flags are only needed once the deferred operations are set up, set these flags appropriately when we set the initial operation state. We also introduce a XFS_DA_OP_REMOVE flag to make it easy to know that we are doing a remove operation. With these, we can remove the use of XATTR_REPLACE and XATTR_CREATE in low level lookup operations, and manipulate the low level flags according to the low level context that is operating. e.g. log recovery does not have a VFS xattr operation state to copy into args->attr_flags, and the low level state machine ops we do for recovery do not match the high level VFS operations that were in progress when the system failed... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
args->op_flags |= XFS_DA_OP_REMOVE;
if (xfs_attr_is_shortform(args->dp))
return XFS_DAS_SF_REMOVE;
if (xfs_attr_is_leaf(args->dp))
return XFS_DAS_LEAF_REMOVE;
return XFS_DAS_NODE_REMOVE;
}
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
/*
* If we are logging the attributes, then we have to start with removal of the
* old attribute so that there is always consistent state that we can recover
* from if the system goes down part way through. We always log the new attr
* value, so even when we remove the attr first we still have the information in
* the log to finish the replace operation atomically.
*/
static inline enum xfs_delattr_state
xfs_attr_init_replace_state(struct xfs_da_args *args)
{
xfs: use XFS_DA_OP flags in deferred attr ops We currently store the high level attr operation in args->attr_flags. This field contains what the VFS is telling us to do, but don't necessarily match what we are doing in the low level modification state machine. e.g. XATTR_REPLACE implies both XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME because it is doing both a remove and adding a new attr. However, deep in the individual state machine operations, we check errors against this high level VFS op flags, not the low level XFS_DA_OP flags. Indeed, we don't even have a low level flag for a REMOVE operation, so the only way we know we are doing a remove is the complete absence of XATTR_REPLACE, XATTR_CREATE, XFS_DA_OP_ADDNAME and XFS_DA_OP_RENAME. And because there are other flags in these fields, this is a pain to check if we need to. As the XFS_DA_OP flags are only needed once the deferred operations are set up, set these flags appropriately when we set the initial operation state. We also introduce a XFS_DA_OP_REMOVE flag to make it easy to know that we are doing a remove operation. With these, we can remove the use of XATTR_REPLACE and XATTR_CREATE in low level lookup operations, and manipulate the low level flags according to the low level context that is operating. e.g. log recovery does not have a VFS xattr operation state to copy into args->attr_flags, and the low level state machine ops we do for recovery do not match the high level VFS operations that were in progress when the system failed... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
args->op_flags |= XFS_DA_OP_ADDNAME | XFS_DA_OP_REPLACE;
xfs: ATTR_REPLACE algorithm with LARP enabled needs rework We can't use the same algorithm for replacing an existing attribute when logging attributes. The existing algorithm is essentially: 1. create new attr w/ INCOMPLETE 2. atomically flip INCOMPLETE flags between old + new attribute 3. remove old attr which is marked w/ INCOMPLETE This algorithm guarantees that we see either the old or new attribute, and if we fail after the atomic flag flip, we don't have to recover the removal of the old attr because we never see INCOMPLETE attributes in lookups. For logged attributes, however, this does not work. The logged attribute intents do not track the work that has been done as the transaction rolls, and hence the only recovery mechanism we have is "run the replace operation from scratch". This is further exacerbated by the attempt to avoid needing the INCOMPLETE flag to create an atomic swap. This means we can create a second active attribute of the same name before we remove the original. If we fail at any point after the create but before the removal has completed, we end up with duplicate attributes in the attr btree and recovery only tries to replace one of them. There are several other failure modes where we can leave partially allocated remote attributes that expose stale data, partially free remote attributes that enable UAF based stale data exposure, etc. TO fix this, we need a different algorithm for replace operations when LARP is enabled. Luckily, it's not that complex if we take the right first step. That is, the first thing we log is the attri intent with the new name/value pair and mark the old attr as INCOMPLETE in the same transaction. From there, we then remove the old attr and keep relogging the new name/value in the intent, such that we always know that we have to create the new attr in recovery. Once the old attr is removed, we then run a normal ATTR_CREATE operation relogging the intent as we go. If the new attr is local, then it gets created in a single atomic transaction that also logs the final intent done. If the new attr is remote, the we set INCOMPLETE on the new attr while we allocate and set the remote value, and then we clear the INCOMPLETE flag at in the last transaction taht logs the final intent done. If we fail at any point in this algorithm, log recovery will always see the same state on disk: the new name/value in the intent, and either an INCOMPLETE attr or no attr in the attr btree. If we find an INCOMPLETE attr, we run the full replace starting with removing the INCOMPLETE attr. If we don't find it, then we simply create the new attr. Notably, recovery of a failed create that has an INCOMPLETE flag set is now the same - we start with the lookup of the INCOMPLETE attr, and if that exists then we do the full replace recovery process, otherwise we just create the new attr. Hence changing the way we do the replace operation when LARP is enabled allows us to use the same log recovery algorithm for both the ATTR_CREATE and ATTR_REPLACE operations. This is also the same algorithm we use for runtime ATTR_REPLACE operations (except for the step setting up the initial conditions). The result is that: - ATTR_CREATE uses the same algorithm regardless of whether LARP is enabled or not - ATTR_REPLACE with larp=0 is identical to the old algorithm - ATTR_REPLACE with larp=1 runs an unmodified attr removal algorithm from the larp=0 code and then runs the unmodified ATTR_CREATE code. - log recovery when larp=1 runs the same ATTR_REPLACE algorithm as it uses at runtime. Because the state machine is now quite clean, changing the algorithm is really just a case of changing the initial state and how the states link together for the ATTR_REPLACE case. Hence it's not a huge amount of code for what is a fairly substantial rework of the attr logging and recovery algorithm.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2022-05-12 15:12:56 +10:00
if (xfs_has_larp(args->dp->i_mount))
return xfs_attr_init_remove_state(args);
return xfs_attr_init_add_state(args);
}
extern struct kmem_cache *xfs_attr_intent_cache;
int __init xfs_attr_intent_init_cache(void);
void xfs_attr_intent_destroy_cache(void);
#endif /* __XFS_ATTR_H__ */