linux/arch/arm/boot/dts/at91sam9g35ek.dts

// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board
 *
 *  Copyright (C) 2012 Atmel,
 *                2012 Nicolas Ferre <nicolas.ferre@atmel.com>
 */
/dts-v1/;
#include "at91sam9g35.dtsi"
#include "at91sam9x5dm.dtsi"
#include "at91sam9x5ek.dtsi"

/ {
	model = "Atmel AT91SAM9G35-EK";
	compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";

	backlight: backlight {
		status = "okay";
	};

	bl_reg: backlight_regulator {
		status = "okay";
	};

	panel: panel {
		status = "okay";
	};

	panel_reg: panel_regulator {
		status = "okay";
	};
};

&hlcdc {
	status = "okay";
};

&macb0 {
	phy-mode = "rmii";
	status = "okay";
};
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 Based on 1 normalized pattern(s): licensed under gplv2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 118 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154040.961286471@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2019-05-19 15:51:34 +02:00			`// SPDX-License-Identifier: GPL-2.0-or-later`
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2012-07-05 16:56:09 +08:00			`/*`
			`* at91sam9g35ek.dts - Device Tree file for AT91SAM9G35-EK board`
			`*`
			`* Copyright (C) 2012 Atmel,`
			`* 2012 Nicolas Ferre <nicolas.ferre@atmel.com>`
			`*/`
			`/dts-v1/;`
ARM: at91: dt: use #include for all device trees to prepare the switch to the macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 2013-05-15 01:21:50 +08:00			`#include "at91sam9g35.dtsi"`
ARM: at91/dt: enable lcd support for at91sam9x5 SoCs Use the at91sam9x5 display module dtsi in the relevant board dts. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 2014-07-31 09:37:06 +02:00			`#include "at91sam9x5dm.dtsi"`
ARM: at91: dt: use #include for all device trees to prepare the switch to the macro. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 2013-05-15 01:21:50 +08:00			`#include "at91sam9x5ek.dtsi"`
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2012-07-05 16:56:09 +08:00
			`/ {`
			`model = "Atmel AT91SAM9G35-EK";`
			`compatible = "atmel,at91sam9g35ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";`
ARM: at91/dt: fix macb node declaration Macb0 node cannot be activated in generic sam9x5ek.dtsi file as the sam9g15 does not have one. Move the macb0 & macb1 activation in board .dts file that support them. Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> 2013-03-22 14:47:54 +01:00
ARM: at91/dt: enable lcd support for at91sam9x5 SoCs Use the at91sam9x5 display module dtsi in the relevant board dts. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> 2014-07-31 09:37:06 +02:00			`backlight: backlight {`
			`status = "okay";`
			`};`

			`bl_reg: backlight_regulator {`
			`status = "okay";`
			`};`

			`panel: panel {`
			`status = "okay";`
			`};`

			`panel_reg: panel_regulator {`
			`status = "okay";`
			`};`
arm: at91: dt: at91sam9 add serial pinctrl support Set the dbgu pinctrl config by default as we have only one possible config For other uart set the rxd/txd by default. For at91sam9x5ek create soc based dts as we need to include specific soc dtsi. Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 2012-07-05 16:56:09 +08:00			`};`
ARM: dts: at91: at91sam9xx5ek: Style cleanup - newline between properties and sub-nodes - use tags from included dtsi instead of duplicating the hierarchy There are no differences in the generated .dtbs Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20190812212757.23432-7-uwe@kleine-koenig.org Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> 2019-08-12 23:27:55 +02:00
			`&hlcdc {`
			`status = "okay";`
			`};`

			`&macb0 {`
			`phy-mode = "rmii";`
			`status = "okay";`
			`};`