public-mirrors/linux
1
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-08-05 16:54:27 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions
linux/sound/soc/tegra/tegra210_adx.c

753 lines
22 KiB
C
Raw Permalink Normal View History

ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
// SPDX-License-Identifier: GPL-2.0-only
ASoC: tegra: Use non-atomic timeout for ADX status register ADX startup() callback uses atomic poll timeout on ADX status register. This is unnecessary because: - The startup() callback itself is non-atomic. - The subsequent timeout call in the same function already uses a non-atomic version. Using atomic version can hog CPU when it is not really needed, so replace it with non-atomic version. Fixes: a99ab6f395a9e ("ASoC: tegra: Add Tegra210 based ADX driver") Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250311062010.33412-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-11 06:20:10 +00:00
// SPDX-FileCopyrightText: Copyright (c) 2021-2025 NVIDIA CORPORATION & AFFILIATES.
ASoC: tegra: Add support for S24_LE audio format Add support for S24_LE format for all internal and IO AHUB modules, except for ASRC (which is already supported). The data flow happens as mentioned below: - ADMAIF picks 24-bit valid data and converts it to 32-bit before sending to internal AHUB modules. This makes the driver change simpler for internal AHUB modules. - IO modules CIF converts the 32-bit data to 24-bit before sending it to the external world. - To maintain consistency across modules, conversions between 24-bit and 32-bit occur either at ADMAIF or at the IO modules CIF. This feature has been thoroughly tested and verified with all internal AHUB modules on the Jetson AGX Orin Platform, as well as with the external RT5640 codec. Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20241022041330.3421765-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-22 04:13:30 +00:00
// All rights reserved.
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
//
// tegra210_adx.c - Tegra210 ADX driver
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/io.h>
ASoC: Explicitly include correct DT includes The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it was merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev> # for at91 Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20231006-dt-asoc-header-cleanups-v3-1-13a4f0f7fee6@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-10-06 15:09:10 -05:00
#include <linux/mod_devicetable.h>
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
#include <linux/module.h>
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
#include <linux/of_device.h>
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include "tegra210_adx.h"
#include "tegra_cif.h"
static const struct reg_default tegra210_adx_reg_defaults[] = {
{ TEGRA210_ADX_RX_INT_MASK, 0x00000001},
{ TEGRA210_ADX_RX_CIF_CTRL, 0x00007000},
{ TEGRA210_ADX_TX_INT_MASK, 0x0000000f },
{ TEGRA210_ADX_TX1_CIF_CTRL, 0x00007000},
{ TEGRA210_ADX_TX2_CIF_CTRL, 0x00007000},
{ TEGRA210_ADX_TX3_CIF_CTRL, 0x00007000},
{ TEGRA210_ADX_TX4_CIF_CTRL, 0x00007000},
{ TEGRA210_ADX_CG, 0x1},
{ TEGRA210_ADX_CFG_RAM_CTRL, 0x00004000},
};
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
static const struct reg_default tegra264_adx_reg_defaults[] = {
{ TEGRA210_ADX_RX_INT_MASK, 0x00000001},
{ TEGRA210_ADX_RX_CIF_CTRL, 0x00003800},
{ TEGRA210_ADX_TX_INT_MASK, 0x0000000f },
{ TEGRA210_ADX_TX1_CIF_CTRL, 0x00003800},
{ TEGRA210_ADX_TX2_CIF_CTRL, 0x00003800},
{ TEGRA210_ADX_TX3_CIF_CTRL, 0x00003800},
{ TEGRA210_ADX_TX4_CIF_CTRL, 0x00003800},
{ TEGRA210_ADX_CG, 0x1},
{ TEGRA264_ADX_CFG_RAM_CTRL, 0x00004000},
};
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
static void tegra210_adx_write_map_ram(struct tegra210_adx *adx)
{
int i;
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
regmap_write(adx->regmap, TEGRA210_ADX_CFG_RAM_CTRL +
adx->soc_data->cya_offset,
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
TEGRA210_ADX_CFG_RAM_CTRL_SEQ_ACCESS_EN |
TEGRA210_ADX_CFG_RAM_CTRL_ADDR_INIT_EN |
TEGRA210_ADX_CFG_RAM_CTRL_RW_WRITE);
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
for (i = 0; i < adx->soc_data->ram_depth; i++)
regmap_write(adx->regmap, TEGRA210_ADX_CFG_RAM_DATA +
adx->soc_data->cya_offset,
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
adx->map[i]);
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
for (i = 0; i < adx->soc_data->byte_mask_size; i++)
regmap_write(adx->regmap,
TEGRA210_ADX_IN_BYTE_EN0 + (i * TEGRA210_ADX_AUDIOCIF_CH_STRIDE),
adx->byte_mask[i]);
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
}
static int tegra210_adx_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct tegra210_adx *adx = snd_soc_dai_get_drvdata(dai);
unsigned int val;
int err;
/* Ensure if ADX status is disabled */
ASoC: tegra: Use non-atomic timeout for ADX status register ADX startup() callback uses atomic poll timeout on ADX status register. This is unnecessary because: - The startup() callback itself is non-atomic. - The subsequent timeout call in the same function already uses a non-atomic version. Using atomic version can hog CPU when it is not really needed, so replace it with non-atomic version. Fixes: a99ab6f395a9e ("ASoC: tegra: Add Tegra210 based ADX driver") Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250311062010.33412-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-11 06:20:10 +00:00
err = regmap_read_poll_timeout(adx->regmap, TEGRA210_ADX_STATUS,
val, !(val & 0x1), 10, 10000);
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
if (err < 0) {
dev_err(dai->dev, "failed to stop ADX, err = %d\n", err);
return err;
}
/*
* Soft Reset: Below performs module soft reset which clears
* all FSM logic, flushes flow control of FIFO and resets the
* state register. It also brings module back to disabled
* state (without flushing the data in the pipe).
*/
regmap_update_bits(adx->regmap, TEGRA210_ADX_SOFT_RESET,
TEGRA210_ADX_SOFT_RESET_SOFT_RESET_MASK,
TEGRA210_ADX_SOFT_RESET_SOFT_EN);
err = regmap_read_poll_timeout(adx->regmap, TEGRA210_ADX_SOFT_RESET,
val, !(val & 0x1), 10, 10000);
if (err < 0) {
dev_err(dai->dev, "failed to reset ADX, err = %d\n", err);
return err;
}
return 0;
}
ASoC: tegra210: Convert to RUNTIME_PM_OPS() & co Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17 10:55:45 +01:00
static int tegra210_adx_runtime_suspend(struct device *dev)
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
{
struct tegra210_adx *adx = dev_get_drvdata(dev);
regcache_cache_only(adx->regmap, true);
regcache_mark_dirty(adx->regmap);
return 0;
}
ASoC: tegra210: Convert to RUNTIME_PM_OPS() & co Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17 10:55:45 +01:00
static int tegra210_adx_runtime_resume(struct device *dev)
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
{
struct tegra210_adx *adx = dev_get_drvdata(dev);
regcache_cache_only(adx->regmap, false);
regcache_sync(adx->regmap);
tegra210_adx_write_map_ram(adx);
return 0;
}
static int tegra210_adx_set_audio_cif(struct snd_soc_dai *dai,
unsigned int channels,
ASoC: tegra: tegra210_adx: fix snd_pcm_format_t type use snd_pcm_format_t instead of unsigned int to fix the following sparse warnings: sound/soc/tegra/tegra210_adx.c:125:14: sparse: warning: restricted snd_pcm_format_t degrades to integer sound/soc/tegra/tegra210_adx.c:128:14: sparse: warning: restricted snd_pcm_format_t degrades to integer sound/soc/tegra/tegra210_adx.c:131:14: sparse: warning: restricted snd_pcm_format_t degrades to integer Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com Link: https://lore.kernel.org/r/20230516223700.185569-1-minhuadotchen@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org
2023-05-17 06:36:59 +08:00
snd_pcm_format_t format,
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
unsigned int reg)
{
struct tegra210_adx *adx = snd_soc_dai_get_drvdata(dai);
struct tegra_cif_conf cif_conf;
int audio_bits;
memset(&cif_conf, 0, sizeof(struct tegra_cif_conf));
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
if (channels < 1 || channels > adx->soc_data->max_ch)
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
return -EINVAL;
switch (format) {
case SNDRV_PCM_FORMAT_S8:
audio_bits = TEGRA_ACIF_BITS_8;
break;
case SNDRV_PCM_FORMAT_S16_LE:
audio_bits = TEGRA_ACIF_BITS_16;
break;
ASoC: tegra: Add support for S24_LE audio format Add support for S24_LE format for all internal and IO AHUB modules, except for ASRC (which is already supported). The data flow happens as mentioned below: - ADMAIF picks 24-bit valid data and converts it to 32-bit before sending to internal AHUB modules. This makes the driver change simpler for internal AHUB modules. - IO modules CIF converts the 32-bit data to 24-bit before sending it to the external world. - To maintain consistency across modules, conversions between 24-bit and 32-bit occur either at ADMAIF or at the IO modules CIF. This feature has been thoroughly tested and verified with all internal AHUB modules on the Jetson AGX Orin Platform, as well as with the external RT5640 codec. Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20241022041330.3421765-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-22 04:13:30 +00:00
case SNDRV_PCM_FORMAT_S24_LE:
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
case SNDRV_PCM_FORMAT_S32_LE:
audio_bits = TEGRA_ACIF_BITS_32;
break;
default:
return -EINVAL;
}
cif_conf.audio_ch = channels;
cif_conf.client_ch = channels;
cif_conf.audio_bits = audio_bits;
cif_conf.client_bits = audio_bits;
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
if (adx->soc_data->max_ch == 32)
tegra264_set_cif(adx->regmap, reg, &cif_conf);
else
tegra_set_cif(adx->regmap, reg, &cif_conf);
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
return 0;
}
static int tegra210_adx_out_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
return tegra210_adx_set_audio_cif(dai, params_channels(params),
params_format(params),
TEGRA210_ADX_TX1_CIF_CTRL + ((dai->id - 1) * TEGRA210_ADX_AUDIOCIF_CH_STRIDE));
}
static int tegra210_adx_in_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
return tegra210_adx_set_audio_cif(dai, params_channels(params),
params_format(params),
TEGRA210_ADX_RX_CIF_CTRL);
}
static int tegra210_adx_get_byte_map(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
struct tegra210_adx *adx = snd_soc_component_get_drvdata(cmpnt);
struct soc_mixer_control *mc;
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
unsigned char *bytes_map = (unsigned char *)adx->map;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
int enabled;
mc = (struct soc_mixer_control *)kcontrol->private_value;
enabled = adx->byte_mask[mc->reg / 32] & (1 << (mc->reg % 32));
ASoC: tegra: Fix ADX byte map Byte mask for channel-1 of stream-1 is not getting enabled and this causes failures during ADX use cases. This happens because the byte map value 0 matches the byte map array and put() callback returns without enabling the corresponding bits in the byte mask. ADX supports 4 output streams and each stream can have a maximum of 16 channels. Each byte in the input frame is uniquely mapped to a byte in one of these 4 outputs. This mapping is done with the help of byte map array via user space control setting. The byte map array size in the driver is 16 and each array element is of size 4 bytes. This corresponds to 64 byte map values. Each byte in the byte map array can have any value between 0 to 255 to enable the corresponding bits in the byte mask. The value 256 is used as a way to disable the byte map. However the byte map array element cannot store this value. The put() callback disables the byte mask for 256 value and byte map value is reset to 0 for this case. This causes problems during subsequent runs since put() callback, for value of 0, just returns without enabling the byte mask. In short, the problem is coming because 0 and 256 control values are stored as 0 in the byte map array. Right now fix the put() callback by actually looking at the byte mask array state to identify if any change is needed and update the fields accordingly. The get() callback needs an update as well to return the correct control value that user has set before. Note that when user set 256, the value is stored as 0 and byte mask is disabled. So byte mask state is used to either return 256 or the value from byte map array. Given above, this looks bit complicated and all this happens because the byte map array is tightly packed and cannot actually store the 256 value. Right now the priority is to fix the existing failure and a TODO item is put to improve this logic. Fixes: 3c97881b8c8a ("ASoC: tegra: Fix kcontrol put callback in ADX") Cc: stable@vger.kernel.org Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1688015537-31682-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-29 10:42:14 +05:30
/*
* TODO: Simplify this logic to just return from bytes_map[]
*
* Presently below is required since bytes_map[] is
* tightly packed and cannot store the control value of 256.
* Byte mask state is used to know if 256 needs to be returned.
* Note that for control value of 256, the put() call stores 0
* in the bytes_map[] and disables the corresponding bit in
* byte_mask[].
*/
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
if (enabled)
ucontrol->value.integer.value[0] = bytes_map[mc->reg];
else
ASoC: tegra: Fix ADX byte map Byte mask for channel-1 of stream-1 is not getting enabled and this causes failures during ADX use cases. This happens because the byte map value 0 matches the byte map array and put() callback returns without enabling the corresponding bits in the byte mask. ADX supports 4 output streams and each stream can have a maximum of 16 channels. Each byte in the input frame is uniquely mapped to a byte in one of these 4 outputs. This mapping is done with the help of byte map array via user space control setting. The byte map array size in the driver is 16 and each array element is of size 4 bytes. This corresponds to 64 byte map values. Each byte in the byte map array can have any value between 0 to 255 to enable the corresponding bits in the byte mask. The value 256 is used as a way to disable the byte map. However the byte map array element cannot store this value. The put() callback disables the byte mask for 256 value and byte map value is reset to 0 for this case. This causes problems during subsequent runs since put() callback, for value of 0, just returns without enabling the byte mask. In short, the problem is coming because 0 and 256 control values are stored as 0 in the byte map array. Right now fix the put() callback by actually looking at the byte mask array state to identify if any change is needed and update the fields accordingly. The get() callback needs an update as well to return the correct control value that user has set before. Note that when user set 256, the value is stored as 0 and byte mask is disabled. So byte mask state is used to either return 256 or the value from byte map array. Given above, this looks bit complicated and all this happens because the byte map array is tightly packed and cannot actually store the 256 value. Right now the priority is to fix the existing failure and a TODO item is put to improve this logic. Fixes: 3c97881b8c8a ("ASoC: tegra: Fix kcontrol put callback in ADX") Cc: stable@vger.kernel.org Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1688015537-31682-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-29 10:42:14 +05:30
ucontrol->value.integer.value[0] = 256;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
return 0;
}
static int tegra210_adx_put_byte_map(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *cmpnt = snd_soc_kcontrol_component(kcontrol);
struct tegra210_adx *adx = snd_soc_component_get_drvdata(cmpnt);
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
unsigned char *bytes_map = (unsigned char *)adx->map;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
int value = ucontrol->value.integer.value[0];
struct soc_mixer_control *mc =
ASoC: tegra: delete a semicolon extra semicolons could be deleted. Signed-off-by: Li kunyu <kunyu@nfschina.com> Link: https://lore.kernel.org/r/20220630020347.7148-1-kunyu@nfschina.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-30 10:03:47 +08:00
(struct soc_mixer_control *)kcontrol->private_value;
ASoC: tegra: Fix ADX byte map Byte mask for channel-1 of stream-1 is not getting enabled and this causes failures during ADX use cases. This happens because the byte map value 0 matches the byte map array and put() callback returns without enabling the corresponding bits in the byte mask. ADX supports 4 output streams and each stream can have a maximum of 16 channels. Each byte in the input frame is uniquely mapped to a byte in one of these 4 outputs. This mapping is done with the help of byte map array via user space control setting. The byte map array size in the driver is 16 and each array element is of size 4 bytes. This corresponds to 64 byte map values. Each byte in the byte map array can have any value between 0 to 255 to enable the corresponding bits in the byte mask. The value 256 is used as a way to disable the byte map. However the byte map array element cannot store this value. The put() callback disables the byte mask for 256 value and byte map value is reset to 0 for this case. This causes problems during subsequent runs since put() callback, for value of 0, just returns without enabling the byte mask. In short, the problem is coming because 0 and 256 control values are stored as 0 in the byte map array. Right now fix the put() callback by actually looking at the byte mask array state to identify if any change is needed and update the fields accordingly. The get() callback needs an update as well to return the correct control value that user has set before. Note that when user set 256, the value is stored as 0 and byte mask is disabled. So byte mask state is used to either return 256 or the value from byte map array. Given above, this looks bit complicated and all this happens because the byte map array is tightly packed and cannot actually store the 256 value. Right now the priority is to fix the existing failure and a TODO item is put to improve this logic. Fixes: 3c97881b8c8a ("ASoC: tegra: Fix kcontrol put callback in ADX") Cc: stable@vger.kernel.org Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1688015537-31682-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-29 10:42:14 +05:30
unsigned int mask_val = adx->byte_mask[mc->reg / 32];
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
ASoC: tegra: Fix ADX byte map Byte mask for channel-1 of stream-1 is not getting enabled and this causes failures during ADX use cases. This happens because the byte map value 0 matches the byte map array and put() callback returns without enabling the corresponding bits in the byte mask. ADX supports 4 output streams and each stream can have a maximum of 16 channels. Each byte in the input frame is uniquely mapped to a byte in one of these 4 outputs. This mapping is done with the help of byte map array via user space control setting. The byte map array size in the driver is 16 and each array element is of size 4 bytes. This corresponds to 64 byte map values. Each byte in the byte map array can have any value between 0 to 255 to enable the corresponding bits in the byte mask. The value 256 is used as a way to disable the byte map. However the byte map array element cannot store this value. The put() callback disables the byte mask for 256 value and byte map value is reset to 0 for this case. This causes problems during subsequent runs since put() callback, for value of 0, just returns without enabling the byte mask. In short, the problem is coming because 0 and 256 control values are stored as 0 in the byte map array. Right now fix the put() callback by actually looking at the byte mask array state to identify if any change is needed and update the fields accordingly. The get() callback needs an update as well to return the correct control value that user has set before. Note that when user set 256, the value is stored as 0 and byte mask is disabled. So byte mask state is used to either return 256 or the value from byte map array. Given above, this looks bit complicated and all this happens because the byte map array is tightly packed and cannot actually store the 256 value. Right now the priority is to fix the existing failure and a TODO item is put to improve this logic. Fixes: 3c97881b8c8a ("ASoC: tegra: Fix kcontrol put callback in ADX") Cc: stable@vger.kernel.org Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1688015537-31682-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-29 10:42:14 +05:30
if (value >= 0 && value <= 255)
mask_val |= (1 << (mc->reg % 32));
else
mask_val &= ~(1 << (mc->reg % 32));
if (mask_val == adx->byte_mask[mc->reg / 32])
ASoC: tegra: Fix kcontrol put callback in ADX The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Filter out duplicate updates in ADX driver. Fixes: a99ab6f395a9 ("ASoC: tegra: Add Tegra210 based ADX driver") Signed-off-by: Sameer Pujar <spujar@nvidia.com> Suggested-by: Jaroslav Kysela <perex@perex.cz> Suggested-by: Mark Brown <broonie@kernel.org> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/1637219231-406-16-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-11-18 12:37:10 +05:30
return 0;
ASoC: tegra: Fix ADX byte map Byte mask for channel-1 of stream-1 is not getting enabled and this causes failures during ADX use cases. This happens because the byte map value 0 matches the byte map array and put() callback returns without enabling the corresponding bits in the byte mask. ADX supports 4 output streams and each stream can have a maximum of 16 channels. Each byte in the input frame is uniquely mapped to a byte in one of these 4 outputs. This mapping is done with the help of byte map array via user space control setting. The byte map array size in the driver is 16 and each array element is of size 4 bytes. This corresponds to 64 byte map values. Each byte in the byte map array can have any value between 0 to 255 to enable the corresponding bits in the byte mask. The value 256 is used as a way to disable the byte map. However the byte map array element cannot store this value. The put() callback disables the byte mask for 256 value and byte map value is reset to 0 for this case. This causes problems during subsequent runs since put() callback, for value of 0, just returns without enabling the byte mask. In short, the problem is coming because 0 and 256 control values are stored as 0 in the byte map array. Right now fix the put() callback by actually looking at the byte mask array state to identify if any change is needed and update the fields accordingly. The get() callback needs an update as well to return the correct control value that user has set before. Note that when user set 256, the value is stored as 0 and byte mask is disabled. So byte mask state is used to either return 256 or the value from byte map array. Given above, this looks bit complicated and all this happens because the byte map array is tightly packed and cannot actually store the 256 value. Right now the priority is to fix the existing failure and a TODO item is put to improve this logic. Fixes: 3c97881b8c8a ("ASoC: tegra: Fix kcontrol put callback in ADX") Cc: stable@vger.kernel.org Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1688015537-31682-3-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-29 10:42:14 +05:30
/* Update byte map and slot */
bytes_map[mc->reg] = value % 256;
adx->byte_mask[mc->reg / 32] = mask_val;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
return 1;
}
ASoC: tegra: Constify static snd_soc_dai_ops structs The only usage of these is to assign their address to the ops field in the snd_soc_dai_driver struct, which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20210922205438.34519-1-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-22 22:54:38 +02:00
static const struct snd_soc_dai_ops tegra210_adx_in_dai_ops = {
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
.hw_params = tegra210_adx_in_hw_params,
.startup = tegra210_adx_startup,
};
ASoC: tegra: Constify static snd_soc_dai_ops structs The only usage of these is to assign their address to the ops field in the snd_soc_dai_driver struct, which is a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/20210922205438.34519-1-rikard.falkeborn@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-22 22:54:38 +02:00
static const struct snd_soc_dai_ops tegra210_adx_out_dai_ops = {
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
.hw_params = tegra210_adx_out_hw_params,
};
#define IN_DAI \
{ \
.name = "ADX-RX-CIF", \
.playback = { \
.stream_name = "RX-CIF-Playback", \
.channels_min = 1, \
.channels_max = 16, \
.rates = SNDRV_PCM_RATE_8000_192000, \
.formats = SNDRV_PCM_FMTBIT_S8 | \
SNDRV_PCM_FMTBIT_S16_LE | \
ASoC: tegra: Add support for S24_LE audio format Add support for S24_LE format for all internal and IO AHUB modules, except for ASRC (which is already supported). The data flow happens as mentioned below: - ADMAIF picks 24-bit valid data and converts it to 32-bit before sending to internal AHUB modules. This makes the driver change simpler for internal AHUB modules. - IO modules CIF converts the 32-bit data to 24-bit before sending it to the external world. - To maintain consistency across modules, conversions between 24-bit and 32-bit occur either at ADMAIF or at the IO modules CIF. This feature has been thoroughly tested and verified with all internal AHUB modules on the Jetson AGX Orin Platform, as well as with the external RT5640 codec. Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20241022041330.3421765-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-22 04:13:30 +00:00
SNDRV_PCM_FMTBIT_S24_LE | \
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
SNDRV_PCM_FMTBIT_S32_LE, \
}, \
.capture = { \
.stream_name = "RX-CIF-Capture", \
.channels_min = 1, \
.channels_max = 16, \
.rates = SNDRV_PCM_RATE_8000_192000, \
.formats = SNDRV_PCM_FMTBIT_S8 | \
SNDRV_PCM_FMTBIT_S16_LE | \
ASoC: tegra: Add support for S24_LE audio format Add support for S24_LE format for all internal and IO AHUB modules, except for ASRC (which is already supported). The data flow happens as mentioned below: - ADMAIF picks 24-bit valid data and converts it to 32-bit before sending to internal AHUB modules. This makes the driver change simpler for internal AHUB modules. - IO modules CIF converts the 32-bit data to 24-bit before sending it to the external world. - To maintain consistency across modules, conversions between 24-bit and 32-bit occur either at ADMAIF or at the IO modules CIF. This feature has been thoroughly tested and verified with all internal AHUB modules on the Jetson AGX Orin Platform, as well as with the external RT5640 codec. Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20241022041330.3421765-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-22 04:13:30 +00:00
SNDRV_PCM_FMTBIT_S24_LE | \
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
SNDRV_PCM_FMTBIT_S32_LE, \
}, \
.ops = &tegra210_adx_in_dai_ops, \
}
#define OUT_DAI(id) \
{ \
.name = "ADX-TX" #id "-CIF", \
.playback = { \
.stream_name = "TX" #id "-CIF-Playback",\
.channels_min = 1, \
.channels_max = 16, \
.rates = SNDRV_PCM_RATE_8000_192000, \
.formats = SNDRV_PCM_FMTBIT_S8 | \
ASoC: tegra: Add support for S24_LE audio format Add support for S24_LE format for all internal and IO AHUB modules, except for ASRC (which is already supported). The data flow happens as mentioned below: - ADMAIF picks 24-bit valid data and converts it to 32-bit before sending to internal AHUB modules. This makes the driver change simpler for internal AHUB modules. - IO modules CIF converts the 32-bit data to 24-bit before sending it to the external world. - To maintain consistency across modules, conversions between 24-bit and 32-bit occur either at ADMAIF or at the IO modules CIF. This feature has been thoroughly tested and verified with all internal AHUB modules on the Jetson AGX Orin Platform, as well as with the external RT5640 codec. Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20241022041330.3421765-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-22 04:13:30 +00:00
SNDRV_PCM_FMTBIT_S16_LE | \
ASoC: tegra: Fix ADX S24_LE audio format Commit 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") added support for the S24_LE audio format, but duplicated S16_LE in OUT_DAI() for ADX instead. Fix this by adding support for the S24_LE audio format. Compile-tested only. Cc: stable@vger.kernel.org Fixes: 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250222225700.539673-2-thorsten.blum@linux.dev Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-22 23:56:59 +01:00
SNDRV_PCM_FMTBIT_S24_LE | \
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
SNDRV_PCM_FMTBIT_S32_LE, \
}, \
.capture = { \
.stream_name = "TX" #id "-CIF-Capture", \
.channels_min = 1, \
.channels_max = 16, \
.rates = SNDRV_PCM_RATE_8000_192000, \
.formats = SNDRV_PCM_FMTBIT_S8 | \
ASoC: tegra: Add support for S24_LE audio format Add support for S24_LE format for all internal and IO AHUB modules, except for ASRC (which is already supported). The data flow happens as mentioned below: - ADMAIF picks 24-bit valid data and converts it to 32-bit before sending to internal AHUB modules. This makes the driver change simpler for internal AHUB modules. - IO modules CIF converts the 32-bit data to 24-bit before sending it to the external world. - To maintain consistency across modules, conversions between 24-bit and 32-bit occur either at ADMAIF or at the IO modules CIF. This feature has been thoroughly tested and verified with all internal AHUB modules on the Jetson AGX Orin Platform, as well as with the external RT5640 codec. Signed-off-by: Ritu Chaudhary <rituc@nvidia.com> Signed-off-by: Sheetal <sheetal@nvidia.com> Reviewed-by: Sameer Pujar <spujar@nvidia.com> Link: https://patch.msgid.link/20241022041330.3421765-1-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-10-22 04:13:30 +00:00
SNDRV_PCM_FMTBIT_S16_LE | \
ASoC: tegra: Fix ADX S24_LE audio format Commit 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") added support for the S24_LE audio format, but duplicated S16_LE in OUT_DAI() for ADX instead. Fix this by adding support for the S24_LE audio format. Compile-tested only. Cc: stable@vger.kernel.org Fixes: 4204eccc7b2a ("ASoC: tegra: Add support for S24_LE audio format") Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250222225700.539673-2-thorsten.blum@linux.dev Signed-off-by: Mark Brown <broonie@kernel.org>
2025-02-22 23:56:59 +01:00
SNDRV_PCM_FMTBIT_S24_LE | \
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
SNDRV_PCM_FMTBIT_S32_LE, \
}, \
.ops = &tegra210_adx_out_dai_ops, \
}
static struct snd_soc_dai_driver tegra210_adx_dais[] = {
IN_DAI,
OUT_DAI(1),
OUT_DAI(2),
OUT_DAI(3),
OUT_DAI(4),
};
static const struct snd_soc_dapm_widget tegra210_adx_widgets[] = {
SND_SOC_DAPM_AIF_IN("RX", NULL, 0, TEGRA210_ADX_ENABLE,
TEGRA210_ADX_ENABLE_SHIFT, 0),
SND_SOC_DAPM_AIF_OUT("TX1", NULL, 0, TEGRA210_ADX_CTRL, 0, 0),
SND_SOC_DAPM_AIF_OUT("TX2", NULL, 0, TEGRA210_ADX_CTRL, 1, 0),
SND_SOC_DAPM_AIF_OUT("TX3", NULL, 0, TEGRA210_ADX_CTRL, 2, 0),
SND_SOC_DAPM_AIF_OUT("TX4", NULL, 0, TEGRA210_ADX_CTRL, 3, 0),
};
#define STREAM_ROUTES(id, sname) \
{ "XBAR-" sname, NULL, "XBAR-TX" }, \
{ "RX-CIF-" sname, NULL, "XBAR-" sname }, \
{ "RX", NULL, "RX-CIF-" sname }, \
{ "TX" #id, NULL, "RX" }, \
{ "TX" #id "-CIF-" sname, NULL, "TX" #id }, \
{ "TX" #id " XBAR-" sname, NULL, "TX" #id "-CIF-" sname }, \
{ "TX" #id " XBAR-RX", NULL, "TX" #id " XBAR-" sname }
#define ADX_ROUTES(id) \
STREAM_ROUTES(id, "Playback"), \
STREAM_ROUTES(id, "Capture")
#define STREAM_ROUTES(id, sname) \
{ "XBAR-" sname, NULL, "XBAR-TX" }, \
{ "RX-CIF-" sname, NULL, "XBAR-" sname }, \
{ "RX", NULL, "RX-CIF-" sname }, \
{ "TX" #id, NULL, "RX" }, \
{ "TX" #id "-CIF-" sname, NULL, "TX" #id }, \
{ "TX" #id " XBAR-" sname, NULL, "TX" #id "-CIF-" sname }, \
{ "TX" #id " XBAR-RX", NULL, "TX" #id " XBAR-" sname }
#define ADX_ROUTES(id) \
STREAM_ROUTES(id, "Playback"), \
STREAM_ROUTES(id, "Capture")
static const struct snd_soc_dapm_route tegra210_adx_routes[] = {
ADX_ROUTES(1),
ADX_ROUTES(2),
ADX_ROUTES(3),
ADX_ROUTES(4),
};
#define TEGRA210_ADX_BYTE_MAP_CTRL(reg) \
SOC_SINGLE_EXT("Byte Map " #reg, reg, 0, 256, 0, \
tegra210_adx_get_byte_map, \
tegra210_adx_put_byte_map)
static struct snd_kcontrol_new tegra210_adx_controls[] = {
TEGRA210_ADX_BYTE_MAP_CTRL(0),
TEGRA210_ADX_BYTE_MAP_CTRL(1),
TEGRA210_ADX_BYTE_MAP_CTRL(2),
TEGRA210_ADX_BYTE_MAP_CTRL(3),
TEGRA210_ADX_BYTE_MAP_CTRL(4),
TEGRA210_ADX_BYTE_MAP_CTRL(5),
TEGRA210_ADX_BYTE_MAP_CTRL(6),
TEGRA210_ADX_BYTE_MAP_CTRL(7),
TEGRA210_ADX_BYTE_MAP_CTRL(8),
TEGRA210_ADX_BYTE_MAP_CTRL(9),
TEGRA210_ADX_BYTE_MAP_CTRL(10),
TEGRA210_ADX_BYTE_MAP_CTRL(11),
TEGRA210_ADX_BYTE_MAP_CTRL(12),
TEGRA210_ADX_BYTE_MAP_CTRL(13),
TEGRA210_ADX_BYTE_MAP_CTRL(14),
TEGRA210_ADX_BYTE_MAP_CTRL(15),
TEGRA210_ADX_BYTE_MAP_CTRL(16),
TEGRA210_ADX_BYTE_MAP_CTRL(17),
TEGRA210_ADX_BYTE_MAP_CTRL(18),
TEGRA210_ADX_BYTE_MAP_CTRL(19),
TEGRA210_ADX_BYTE_MAP_CTRL(20),
TEGRA210_ADX_BYTE_MAP_CTRL(21),
TEGRA210_ADX_BYTE_MAP_CTRL(22),
TEGRA210_ADX_BYTE_MAP_CTRL(23),
TEGRA210_ADX_BYTE_MAP_CTRL(24),
TEGRA210_ADX_BYTE_MAP_CTRL(25),
TEGRA210_ADX_BYTE_MAP_CTRL(26),
TEGRA210_ADX_BYTE_MAP_CTRL(27),
TEGRA210_ADX_BYTE_MAP_CTRL(28),
TEGRA210_ADX_BYTE_MAP_CTRL(29),
TEGRA210_ADX_BYTE_MAP_CTRL(30),
TEGRA210_ADX_BYTE_MAP_CTRL(31),
TEGRA210_ADX_BYTE_MAP_CTRL(32),
TEGRA210_ADX_BYTE_MAP_CTRL(33),
TEGRA210_ADX_BYTE_MAP_CTRL(34),
TEGRA210_ADX_BYTE_MAP_CTRL(35),
TEGRA210_ADX_BYTE_MAP_CTRL(36),
TEGRA210_ADX_BYTE_MAP_CTRL(37),
TEGRA210_ADX_BYTE_MAP_CTRL(38),
TEGRA210_ADX_BYTE_MAP_CTRL(39),
TEGRA210_ADX_BYTE_MAP_CTRL(40),
TEGRA210_ADX_BYTE_MAP_CTRL(41),
TEGRA210_ADX_BYTE_MAP_CTRL(42),
TEGRA210_ADX_BYTE_MAP_CTRL(43),
TEGRA210_ADX_BYTE_MAP_CTRL(44),
TEGRA210_ADX_BYTE_MAP_CTRL(45),
TEGRA210_ADX_BYTE_MAP_CTRL(46),
TEGRA210_ADX_BYTE_MAP_CTRL(47),
TEGRA210_ADX_BYTE_MAP_CTRL(48),
TEGRA210_ADX_BYTE_MAP_CTRL(49),
TEGRA210_ADX_BYTE_MAP_CTRL(50),
TEGRA210_ADX_BYTE_MAP_CTRL(51),
TEGRA210_ADX_BYTE_MAP_CTRL(52),
TEGRA210_ADX_BYTE_MAP_CTRL(53),
TEGRA210_ADX_BYTE_MAP_CTRL(54),
TEGRA210_ADX_BYTE_MAP_CTRL(55),
TEGRA210_ADX_BYTE_MAP_CTRL(56),
TEGRA210_ADX_BYTE_MAP_CTRL(57),
TEGRA210_ADX_BYTE_MAP_CTRL(58),
TEGRA210_ADX_BYTE_MAP_CTRL(59),
TEGRA210_ADX_BYTE_MAP_CTRL(60),
TEGRA210_ADX_BYTE_MAP_CTRL(61),
TEGRA210_ADX_BYTE_MAP_CTRL(62),
TEGRA210_ADX_BYTE_MAP_CTRL(63),
};
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
static struct snd_kcontrol_new tegra264_adx_controls[] = {
TEGRA210_ADX_BYTE_MAP_CTRL(64),
TEGRA210_ADX_BYTE_MAP_CTRL(65),
TEGRA210_ADX_BYTE_MAP_CTRL(66),
TEGRA210_ADX_BYTE_MAP_CTRL(67),
TEGRA210_ADX_BYTE_MAP_CTRL(68),
TEGRA210_ADX_BYTE_MAP_CTRL(69),
TEGRA210_ADX_BYTE_MAP_CTRL(70),
TEGRA210_ADX_BYTE_MAP_CTRL(71),
TEGRA210_ADX_BYTE_MAP_CTRL(72),
TEGRA210_ADX_BYTE_MAP_CTRL(73),
TEGRA210_ADX_BYTE_MAP_CTRL(74),
TEGRA210_ADX_BYTE_MAP_CTRL(75),
TEGRA210_ADX_BYTE_MAP_CTRL(76),
TEGRA210_ADX_BYTE_MAP_CTRL(77),
TEGRA210_ADX_BYTE_MAP_CTRL(78),
TEGRA210_ADX_BYTE_MAP_CTRL(79),
TEGRA210_ADX_BYTE_MAP_CTRL(80),
TEGRA210_ADX_BYTE_MAP_CTRL(81),
TEGRA210_ADX_BYTE_MAP_CTRL(82),
TEGRA210_ADX_BYTE_MAP_CTRL(83),
TEGRA210_ADX_BYTE_MAP_CTRL(84),
TEGRA210_ADX_BYTE_MAP_CTRL(85),
TEGRA210_ADX_BYTE_MAP_CTRL(86),
TEGRA210_ADX_BYTE_MAP_CTRL(87),
TEGRA210_ADX_BYTE_MAP_CTRL(88),
TEGRA210_ADX_BYTE_MAP_CTRL(89),
TEGRA210_ADX_BYTE_MAP_CTRL(90),
TEGRA210_ADX_BYTE_MAP_CTRL(91),
TEGRA210_ADX_BYTE_MAP_CTRL(92),
TEGRA210_ADX_BYTE_MAP_CTRL(93),
TEGRA210_ADX_BYTE_MAP_CTRL(94),
TEGRA210_ADX_BYTE_MAP_CTRL(95),
TEGRA210_ADX_BYTE_MAP_CTRL(96),
TEGRA210_ADX_BYTE_MAP_CTRL(97),
TEGRA210_ADX_BYTE_MAP_CTRL(98),
TEGRA210_ADX_BYTE_MAP_CTRL(99),
TEGRA210_ADX_BYTE_MAP_CTRL(100),
TEGRA210_ADX_BYTE_MAP_CTRL(101),
TEGRA210_ADX_BYTE_MAP_CTRL(102),
TEGRA210_ADX_BYTE_MAP_CTRL(103),
TEGRA210_ADX_BYTE_MAP_CTRL(104),
TEGRA210_ADX_BYTE_MAP_CTRL(105),
TEGRA210_ADX_BYTE_MAP_CTRL(106),
TEGRA210_ADX_BYTE_MAP_CTRL(107),
TEGRA210_ADX_BYTE_MAP_CTRL(108),
TEGRA210_ADX_BYTE_MAP_CTRL(109),
TEGRA210_ADX_BYTE_MAP_CTRL(110),
TEGRA210_ADX_BYTE_MAP_CTRL(111),
TEGRA210_ADX_BYTE_MAP_CTRL(112),
TEGRA210_ADX_BYTE_MAP_CTRL(113),
TEGRA210_ADX_BYTE_MAP_CTRL(114),
TEGRA210_ADX_BYTE_MAP_CTRL(115),
TEGRA210_ADX_BYTE_MAP_CTRL(116),
TEGRA210_ADX_BYTE_MAP_CTRL(117),
TEGRA210_ADX_BYTE_MAP_CTRL(118),
TEGRA210_ADX_BYTE_MAP_CTRL(119),
TEGRA210_ADX_BYTE_MAP_CTRL(120),
TEGRA210_ADX_BYTE_MAP_CTRL(121),
TEGRA210_ADX_BYTE_MAP_CTRL(122),
TEGRA210_ADX_BYTE_MAP_CTRL(123),
TEGRA210_ADX_BYTE_MAP_CTRL(124),
TEGRA210_ADX_BYTE_MAP_CTRL(125),
TEGRA210_ADX_BYTE_MAP_CTRL(126),
TEGRA210_ADX_BYTE_MAP_CTRL(127),
};
static int tegra210_adx_component_probe(struct snd_soc_component *component)
{
struct tegra210_adx *adx = snd_soc_component_get_drvdata(component);
int err = 0;
if (adx->soc_data->num_controls) {
err = snd_soc_add_component_controls(component, adx->soc_data->controls,
adx->soc_data->num_controls);
if (err)
dev_err(component->dev, "can't add ADX controls, err: %d\n", err);
}
return err;
}
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
static const struct snd_soc_component_driver tegra210_adx_cmpnt = {
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
.probe = tegra210_adx_component_probe,
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
.dapm_widgets = tegra210_adx_widgets,
.num_dapm_widgets = ARRAY_SIZE(tegra210_adx_widgets),
.dapm_routes = tegra210_adx_routes,
.num_dapm_routes = ARRAY_SIZE(tegra210_adx_routes),
.controls = tegra210_adx_controls,
.num_controls = ARRAY_SIZE(tegra210_adx_controls),
};
static bool tegra210_adx_wr_reg(struct device *dev,
unsigned int reg)
{
switch (reg) {
case TEGRA210_ADX_TX_INT_MASK ... TEGRA210_ADX_TX4_CIF_CTRL:
case TEGRA210_ADX_RX_INT_MASK ... TEGRA210_ADX_RX_CIF_CTRL:
case TEGRA210_ADX_ENABLE ... TEGRA210_ADX_CG:
case TEGRA210_ADX_CTRL ... TEGRA210_ADX_IN_BYTE_EN1:
case TEGRA210_ADX_CFG_RAM_CTRL ... TEGRA210_ADX_CFG_RAM_DATA:
return true;
default:
return false;
}
}
static bool tegra210_adx_rd_reg(struct device *dev,
unsigned int reg)
{
switch (reg) {
case TEGRA210_ADX_RX_STATUS ... TEGRA210_ADX_CFG_RAM_DATA:
return true;
default:
return false;
}
}
static bool tegra210_adx_volatile_reg(struct device *dev,
unsigned int reg)
{
switch (reg) {
case TEGRA210_ADX_RX_STATUS:
case TEGRA210_ADX_RX_INT_STATUS:
case TEGRA210_ADX_RX_INT_SET:
case TEGRA210_ADX_TX_STATUS:
case TEGRA210_ADX_TX_INT_STATUS:
case TEGRA210_ADX_TX_INT_SET:
case TEGRA210_ADX_SOFT_RESET:
case TEGRA210_ADX_STATUS:
case TEGRA210_ADX_INT_STATUS:
case TEGRA210_ADX_CFG_RAM_CTRL:
case TEGRA210_ADX_CFG_RAM_DATA:
return true;
default:
break;
}
return false;
}
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
static bool tegra264_adx_wr_reg(struct device *dev,
unsigned int reg)
{
switch (reg) {
case TEGRA210_ADX_TX_INT_MASK ... TEGRA210_ADX_TX4_CIF_CTRL:
case TEGRA210_ADX_RX_INT_MASK ... TEGRA210_ADX_RX_CIF_CTRL:
case TEGRA210_ADX_ENABLE ... TEGRA210_ADX_CG:
case TEGRA210_ADX_CTRL ... TEGRA264_ADX_CYA:
case TEGRA264_ADX_CFG_RAM_CTRL ... TEGRA264_ADX_CFG_RAM_DATA:
return true;
default:
return false;
}
}
static bool tegra264_adx_rd_reg(struct device *dev,
unsigned int reg)
{
switch (reg) {
case TEGRA210_ADX_RX_STATUS ... TEGRA210_ADX_RX_CIF_CTRL:
case TEGRA210_ADX_TX_STATUS ... TEGRA210_ADX_TX4_CIF_CTRL:
case TEGRA210_ADX_ENABLE ... TEGRA210_ADX_INT_STATUS:
case TEGRA210_ADX_CTRL ... TEGRA264_ADX_CFG_RAM_DATA:
return true;
default:
return false;
}
}
static bool tegra264_adx_volatile_reg(struct device *dev,
unsigned int reg)
{
switch (reg) {
case TEGRA210_ADX_RX_STATUS:
case TEGRA210_ADX_RX_INT_STATUS:
case TEGRA210_ADX_RX_INT_SET:
case TEGRA210_ADX_TX_STATUS:
case TEGRA210_ADX_TX_INT_STATUS:
case TEGRA210_ADX_TX_INT_SET:
case TEGRA210_ADX_SOFT_RESET:
case TEGRA210_ADX_STATUS:
case TEGRA210_ADX_INT_STATUS:
case TEGRA264_ADX_CFG_RAM_CTRL:
case TEGRA264_ADX_CFG_RAM_DATA:
return true;
default:
break;
}
return false;
}
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
static const struct regmap_config tegra210_adx_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = TEGRA210_ADX_CFG_RAM_DATA,
.writeable_reg = tegra210_adx_wr_reg,
.readable_reg = tegra210_adx_rd_reg,
.volatile_reg = tegra210_adx_volatile_reg,
.reg_defaults = tegra210_adx_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(tegra210_adx_reg_defaults),
.cache_type = REGCACHE_FLAT,
};
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
static const struct regmap_config tegra264_adx_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = TEGRA264_ADX_CFG_RAM_DATA,
.writeable_reg = tegra264_adx_wr_reg,
.readable_reg = tegra264_adx_rd_reg,
.volatile_reg = tegra264_adx_volatile_reg,
.reg_defaults = tegra264_adx_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(tegra264_adx_reg_defaults),
.cache_type = REGCACHE_FLAT,
};
static const struct tegra210_adx_soc_data soc_data_tegra210 = {
.regmap_conf = &tegra210_adx_regmap_config,
.max_ch = TEGRA210_ADX_MAX_CHANNEL,
.ram_depth = TEGRA210_ADX_RAM_DEPTH,
.byte_mask_size = TEGRA210_ADX_BYTE_MASK_COUNT,
.cya_offset = TEGRA210_ADX_CYA_OFFSET,
};
static const struct tegra210_adx_soc_data soc_data_tegra264 = {
.regmap_conf = &tegra264_adx_regmap_config,
.max_ch = TEGRA264_ADX_MAX_CHANNEL,
.ram_depth = TEGRA264_ADX_RAM_DEPTH,
.byte_mask_size = TEGRA264_ADX_BYTE_MASK_COUNT,
.cya_offset = TEGRA264_ADX_CYA_OFFSET,
.controls = tegra264_adx_controls,
.num_controls = ARRAY_SIZE(tegra264_adx_controls),
};
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
static const struct of_device_id tegra210_adx_of_match[] = {
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
{ .compatible = "nvidia,tegra210-adx", .data = &soc_data_tegra210 },
{ .compatible = "nvidia,tegra264-adx", .data = &soc_data_tegra264 },
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
{},
};
MODULE_DEVICE_TABLE(of, tegra210_adx_of_match);
static int tegra210_adx_platform_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct tegra210_adx *adx;
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
const struct of_device_id *match;
struct tegra210_adx_soc_data *soc_data;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
void __iomem *regs;
int err;
adx = devm_kzalloc(dev, sizeof(*adx), GFP_KERNEL);
if (!adx)
return -ENOMEM;
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
match = of_match_device(tegra210_adx_of_match, dev);
soc_data = (struct tegra210_adx_soc_data *)match->data;
adx->soc_data = soc_data;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
dev_set_drvdata(dev, adx);
regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(regs))
return PTR_ERR(regs);
adx->regmap = devm_regmap_init_mmio(dev, regs,
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
soc_data->regmap_conf);
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
if (IS_ERR(adx->regmap)) {
dev_err(dev, "regmap init failed\n");
return PTR_ERR(adx->regmap);
}
regcache_cache_only(adx->regmap, true);
ASoC: tegra: ADX: Add Tegra264 support Add Tegra264 ADX support with following changes: - Add soc_data for Tegra264-specific variations - Tegra264 ADX supports 32 input channels, hence update the playback DAI channels_max parameter and CIF configuration API. - Register offsets and default values are updated to align with Tegra264. - Add 128 byte map controls for Tegra264 to accommodate each byte per channel (32channels x 32bits). Signed-off-by: Sheetal <sheetal@nvidia.com> Link: https://patch.msgid.link/20250512051747.1026770-10-sheetal@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-05-12 05:17:45 +00:00
adx->map = devm_kzalloc(dev, soc_data->ram_depth * sizeof(*adx->map),
GFP_KERNEL);
if (!adx->map)
return -ENOMEM;
adx->byte_mask = devm_kzalloc(dev,
soc_data->byte_mask_size * sizeof(*adx->byte_mask),
GFP_KERNEL);
if (!adx->byte_mask)
return -ENOMEM;
tegra210_adx_dais[TEGRA_ADX_IN_DAI_ID].playback.channels_max =
adx->soc_data->max_ch;
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
err = devm_snd_soc_register_component(dev, &tegra210_adx_cmpnt,
tegra210_adx_dais,
ARRAY_SIZE(tegra210_adx_dais));
if (err) {
dev_err(dev, "can't register ADX component, err: %d\n", err);
return err;
}
pm_runtime_enable(dev);
return 0;
}
ASoC: tegra: tegra210_adx: Convert to platform remove callback returning void The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20230315150745.67084-151-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2023-03-15 16:07:22 +01:00
static void tegra210_adx_platform_remove(struct platform_device *pdev)
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
{
pm_runtime_disable(&pdev->dev);
}
static const struct dev_pm_ops tegra210_adx_pm_ops = {
ASoC: tegra210: Convert to RUNTIME_PM_OPS() & co Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17 10:55:45 +01:00
RUNTIME_PM_OPS(tegra210_adx_runtime_suspend,
tegra210_adx_runtime_resume, NULL)
SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, pm_runtime_force_resume)
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
};
static struct platform_driver tegra210_adx_driver = {
.driver = {
.name = "tegra210-adx",
.of_match_table = tegra210_adx_of_match,
ASoC: tegra210: Convert to RUNTIME_PM_OPS() & co Use the newer RUNTIME_PM_OPS() and SYSTEM_SLEEP_PM_OPS() macros instead of SET_RUNTIME_PM_OPS() and SET_SYSTEM_SLEEP_PM_OPS() together with pm_ptr(), which allows us dropping ugly __maybe_unused attributes. This optimizes slightly when CONFIG_PM is disabled, too. Cc: linux-tegra@vger.kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://patch.msgid.link/20250317095603.20073-84-tiwai@suse.de Signed-off-by: Mark Brown <broonie@kernel.org>
2025-03-17 10:55:45 +01:00
.pm = pm_ptr(&tegra210_adx_pm_ops),
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
},
.probe = tegra210_adx_platform_probe,
ASoC: Switch back to struct platform_driver::remove() After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all drivers below sound/soc to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Link: https://patch.msgid.link/20240909151230.909818-2-u.kleine-koenig@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-09 17:12:30 +02:00
.remove = tegra210_adx_platform_remove,
ASoC: tegra: Add Tegra210 based ADX driver The Audio Demultiplexer (ADX) block takes an input stream with up to 16 channels and demultiplexes it into four output streams of up to 16 channels each. A byte RAM helps to form output frames by any combination of bytes from the input frame. Its design is identical to that of byte RAM in the AMX except that the data flow direction is reversed. This patch registers ADX driver with ASoC framework. The component driver exposes DAPM widgets, routes and kcontrols for the device. The DAI driver exposes ADX interfaces, which can be used to connect different components in the ASoC layer. Makefile and Kconfig support is added to allow build the driver. It can be enabled in the DT via "nvidia,tegra210-adx" compatible binding. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Link: https://lore.kernel.org/r/1631551342-25469-10-git-send-email-spujar@nvidia.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-13 22:12:17 +05:30
};
module_platform_driver(tegra210_adx_driver);
MODULE_AUTHOR("Arun Shamanna Lakshmi <aruns@nvidia.com>");
MODULE_DESCRIPTION("Tegra210 ADX ASoC driver");
MODULE_LICENSE("GPL v2");
Reference in a new issue Copy permalink